AP and number of users served.

Hi all,
Iv a question related to capacity or number of users one AP can serve.
For instance, one open space without the walls and 2 APs (one 1252AG and one 1231G) and 50 people.
Is it enough to connect all people to WiFi? For instance, every AP will serve 25 people with 2Mbps BW for each.
Any idea?
BR
gg

Hi GG,
Just to add a clip to the excellent answers from my friends
Leo and Ryan (+5 points each guys
Here is a cisco doc that relates to this question;
Q. How many clients can associate to the AP?
A. The AP has the physical capacity to handle 2048 MAC addresses. However, because the AP is a shared medium and acts as a wireless hub, the performance of each user decreases as the number of users increases on an individual AP. Ideally, not more than 24 clients should associate with the AP because the throughput of the AP is reduced with each client that associates to the AP.
From this Q&A doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps!
Rob

Similar Messages

Delegated Admin and Number of Users

Recently we deleted about 3K users using: commadmin domain purge, and while
it appears to have successfully deleted the users -- ldapsearch doesn't yield any
output. The lower number of users is NOT reflected in the field "Number of Users"
on the Delegated Admin page. It still shows the same number of users >11K we
"had" prior to the deletion process.
Any ideas to explain this discrepancy?
-- Bob

rkbunca wrote:
Recently we deleted about 3K users using: commadmin domain purge, and while
it appears to have successfully deleted the users -- ldapsearch doesn't yield any
output. The lower number of users is NOT reflected in the field "Number of Users"
on the Delegated Admin page. It still shows the same number of users >11K we
"had" prior to the deletion process.
Any ideas to explain this discrepancy?The number of users displayed in the DA GUI is recorded in the "sunNumUsers" attribute associated with the domain e.g.
dn: o=aus.sun.com,dc=aus,dc=sun,dc=com
sunNumUsers: 11
This is to avoid having to do an ldapsearch across the domain to get a count. You can manually update this attribute to get the number back-in-sync.
The commadmin domain purge should have updated this value -- I couldn't find any pre-existing bugs to explain why it didn't happen in your case. I suggest you log a support case to get this looked into further.
You may also want to check your directory audit logs to see if an attempt was made to update this attribute but failed for some reason.
Regards,
Shane.

How do I find the number of users logged on another server?

I'm trying to ping other servers and find the number of users logged on that server. Any leads?

Do you need maybe something like this?
FINGER(1) UNIX Reference Manual
NAME
finger - user information lookup program
SYNOPSIS
finger [-lmMspho] [user ...] [user@host ...]
DESCRIPTION
The finger utility displays information about the system users.

User base Synchronization between SAP and MS Active Directory Server

Dear all!
I'm using Web AS 6.20 ABAP and MS Active Directory Server based on Win 2003 Server.
i successfully implemented the synchronization of user data between SAP and the ADS.
My question: Is there a way to customize the users on Active Directory Server in regard to their SAP authorization (roles auth. objects etc.)?
Currently I don't have a clue how to do this.
Regards,
Christoph

Have you searched on SDN for "Active Directory"? That turns up a number of results. I think your expectation might be backwards though, it's not how ADS exposes SAP specific data but how SAP uses ADS to store SAP specific data. My understanding (from quite some time ago so I am fuzzy on this) is that SAP can use ADS in much the same way it can use LDAP as an external user store.
The Security Newsletter from November 04 [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/sap security newsletter november 2004.pdf] mentions that a webinar is hosted on SDN about this exact topic, unfortunately I was unable to find a direct link.
Regards,
Marc g

Minimum number of users to warrant a branch office server

I'd suggest that it's nothing to do with the number of users, but rather what type and amount of work is going on. It could also be affected by a number of other issues; the speed of available Internet connection, how much support you have to provide, how far away from other officesetc.However, as an exampleI had a small site with about 7 staff using PCs and another 20+ staff working in a workshop; I set them up with a coupleof servers due to the work that was going on at that site. I had planned to virtualize these, but left before I got around to it.They wereproviding AD, DHCP, DNS, CA, Print Services to 3 printers, local file store, some database apps and a specialist bar code printer. We also had separate web filtering, a local PBX linked back to a central controller. Because it was a long way to travel to reach, we tried to make...

We have a branch office, currently housing 10 staff.
The office is to be expanded to 16.
Currently staff are using thin clients and logging into our Citrix Xenapp 6.5 server every day
The server comfortably copes with the 10 heads so far and is licenced to handle 20 concurrent connections.
What is the minimum number of heads before you would recommend adding a server to a branch office?
This topic first appeared in the Spiceworks Community

Maximum number of users for server SEQ module exceeded

Hi ,
I am getting the below error for optimizer SEQ in SCM 7.0 EHP3 system.
"Maximum number of user for server SEQ module exceeded"
But the RFC connection works fine and all are green in /sapapo/opt03.
Should I increase the user in /sapapo/opt03? for SEQ..and on which column...Maximum slot?
Thanks in advance

Can you check this thread:
maximum number of users for server module SNP exceeded
Divyanshu

Record Number of users logged in to Portal and bring the data in to BI

HI,
I have a requirement for identifying the number of users logging in to SRM Portal and bringing those information in to BI and reporting them
Can any one please tell me, how do i need to find those
I checked tables USR01, USR02, USR03, USR41 etc but none of them gives the proper user/server information needed,
SM04 transaction logs both user logging in to SRM server as well as SRM portal, but i need to find the underlying table for SM04, with which i can get the number of users logged in to the portal on a particular date range.
If not, can anyone please tell me what is the best way to identify number of users logged in to SRM portal on a particular date and capturing those information and bringing in to BI and reporting them in BI
Thanks in advance
Pooja
Edited by: Pooja on Nov 25, 2008 5:10 PM

Please check the below link. should guide you in identifying the number of users logged into Portal which can be used for your reporting.
[/message/319314#319314 [original link is broken];
Thanks,
Sruthi

Find Number of Users Currently Logged on to a SharePoint 2013 on premise server?

Hello,
We would like to know which current users are logged in our SharePoint farm.
Is there a simple powershell script which we can run? or enable a feature
Thanks,
Dennis

SharePoint is a web technology, which means it is connectionless by design. So there really isn't such a thing as the number of users being logged on being tracked by the server. The closest you can come is to have the server report how many
active sessions haven't timed out yet. Not quite the same thing since some of the sessions will be people who stopped using the system during the last half hour or so who's sessions haven't expired yet. But its the closest you can come. Here's
a deeper explanation and one potential solution.
http://blog.furuknap.net/find-number-of-users-currently-logged-on-to-a-sharepoint-site
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

I am in the final stages of a cross-forest migration. Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest. User accounts were not migrated. The accounts in use have always
been in the "new" forest. One of our challenges was the large volume of data in redirected folders. I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
the entire users share, copying the permissions with the files. By doing incremental robocopies, we can get a final copy done now in about six hours. The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
change the folder redirection policy Documents path from
\\oldserver\users\%USERNAME% to
\\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder. Everything was going well until I tested the policy change. After the folder redirection policy is updated
and applied, the user cannot access the private Documents folder. For example, user Chester Tester logs on as ctester. I open Windows Explorer and click the Documents shortcut. I see one subfolder, which is subfolder of Public Documents.
So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error. Now for the kicker, if I open another Windows Explorer window and edit the address bar to
\\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
I'm hoping this is something really simple to fix!
TIA

HI Vivian,
Thank you for your reply. Yes, the path in Group Policy Folder Redirection Root Path was updated to
\\NEWSERVER\users. I had planned to point this to the distributed file system, so the first used was actually
\\domain\dfs\users. To simplify things I have backed off to copying to just a normal share
\\newserver\users.
We are using BASIC folder redirection and we create a folder for each user under the root path.
We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times (or higher) after the policy is changed.
Grant the User exclusive right to Documents - Disabled
Move the contents of Documents to the new location - Disabled
Related folder settings
Video - Follow Documents
Music - Follow Documents
Pictures - Follow Documents
Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server. The redirected Documents points to an empty folder set. The copied folders with all user
data are there, but folder redirection refuses to recognize the original folder.
I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name. For now, I just want the redirection to move from the old server to the new server properly. I deleted
the new My Documents folder, rebooted the user's workstation and tried again. The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server. The environment
has about 1500 users with approximately 1.3TB of data in the redirected Documents folders. OUCH!

Login problem in that the radius server is not configured. And the local user does not authenticate

When trying to login, the message appears "No radius server configured" and the local user does not authenticate. How do I access without rebooting the Switch 6500 with CatOS.

Hi PK.
Thanks for your Attention. You know how to insert a line configuration via SNMP RW "set radius server 10.112.15.21 auth-port 1645 primary"?
I believe this way or can I work around the problem.

In weblogic server when I Setting Up a User and Tablespace for the Server M

In weblogic server when I Setting Up a User and Tablespace for the Server Migration Leasing Table in Sql Plus I got an error. ORA-00972: identifier is too long

Refer: How to: Grant User Access to a Report Server (Report Manager), but this gives a step-by-step procedure for
adding users who are a part of the Domain. In your case you are trying to add users who are not a part of the domain, meaning, you are trying to create users only specific to Reporting Services, am I right?
But Reporting Services either relies on AD to authenticate the users, or you can create a custom-authentication extension to authenticate the users.
In your case, you might need use a custom security extension, and use that to create/delete/modify users. Check the Forms authentication Sample here:
http://msftrsprodsamples.codeplex.com/wikipage?title=SS2008%21Security%20Extension%20Sample&referringTitle=Home
Other references:
Implementing a Security Extension
How to: Configure Custom or Forms Authentication in Reporting Services
Hope this helps
Chaitanya( Twitter |
Blogs )
Any documentation bug? Tell us about it at
Connect. Please feel free to add any community comments in any of the MSDN/technet articles.
This posting is provided "AS IS" with no warranties, and confers no rights.
The next CTP for SQL Server Code Name "Denali" is coming soon.
Sign up now to be notified of the next CTP release.

How can I rise limit of number of users on an server in logon group (SMLG).

Hello
How can I rise limit of number of users on an server in logon group (SMLG).

In that case, you have not done your Sizing correctly. If users are more on all the Servers, then your performance is hampering, which is leading to delay in Response time.
So the first course of action is to proper gathering of logging of users & as per that, you need to increase app server.
Also check out how the Operation modes has been divided...if Dialog users are more & BGD users are less in Morning time (IST) for example you can have Switching of Dialog users by which your processes are occupied more for Dialog users, therefore more no of users can log in & vice-versa.

Number of user sessions in the Application Server for a config entry

Hi All
I am using 10g AS, with 9i DB.
My requirement is that -
i need to find the total number of users of the application in any moment, and to
display that information to the users. say, config=abc, super users need to find all
those who are using the link from the application itself.
I can see that information from the 10 g Enterprise Manager -> Forms -> User Sessions.
But is there any means of transfering that information to forms.
Can this be done by using PJC's ?
Please post your solutions/suggestions
Thanks in Advance
Deepa

Any help/ideas Please
Deepa

How many licenses my comapny has and how many number of users logged in.

Hi All,
Can any one tell,
before login into the SAP B1,
I want to know
how many licenses my comapny has and how many number of users(Licenced) logged in using Query Analyzer or any other way.
Thanks
Chakrapani
Edited by: chakrapani bandaru on Feb 17, 2010 12:58 PM

Hi Sunderraj,
Can u eloberate the answer,
I want to take a report of that count.
Thanks
Edited by: chakrapani bandaru on Feb 17, 2010 2:14 PM

Why Apple doesn't provide options in IOS to power off, reset, standby ipad/iPhone/ipod ? I don't se this opiton in IOS6 as well ? This option will help to avoid pressing power button less number of times and gives better user experience.

Why Apple doesn't provide options in IOS to power off, reset, standby ipad/iPhone/ipod ? I don't se this opiton in IOS6 as well ? This option will help to avoid pressing power button less number of times and gives better user experience.

They do.
Standby = press the Power button
Power off = Press and hold Power button then slide the red power off slider.
Reset = Press and hold both Reset adn Home till you see the Apple logo.
This option will help to avoid pressing power button less number of times and gives better user experience.
Because it is better to not push the power button and more enjoyable to not push it?

AP and number of users served.

Similar Messages

Maybe you are looking for