AP connected to PoE switch is not coming up

Hi,
I have one ap-1131ag which is connected to PoE switch is not coming up , I tried to enable under interface mode to respective interface where AP is connected with below command :
" Power Inline enable "  but still no luck , is there any thing i need to enable or check at switch side ?  :
SW1#sh power inline
Module   Available     Used     Remaining
          (Watts)     (Watts)    (Watts)
1             n/a        n/a         n/a
2             n/a        n/a         n/a
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)
Gi2/0/1   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/2   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/3   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/4   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/5   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/6   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/7   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/8   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/9   auto   off        0.0     n/a                 n/a   30.0
Gi2/0/10  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/11  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/12  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/13  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/14  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/15  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/16  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/17  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/18  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/19  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/20  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/21  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/22  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/23  auto   off        0.0     n/a                 n/a   30.0
Gi2/0/24  auto   off        0.0     n/a                 n/a   30.0
please suggest me .

Hi,
I have confirmed that , the switch where we are trying to connect is PoE switch :
please see model details below :
we have cisco switch 3750 stacking over there with one non-PoE switch :
switch 1 provision ws-c3750x-48 : non-PoE switch
switch 2 provision ws-c3750x-48p : PoE switch
both the switches are stacked :
please refer below stack-power details as well :
Power stack name: Powerstack-1
    Stack mode: Power sharing
    Switch 1:
        Power budget: 206
        Low port priority value: 21
        High port priority value: 12
        Switch priority value: 3
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: 503d.e58a.be80
        Neighbor on port 2: 503d.e58a.be80
    Switch 2:
        Power budget: 102
        Low port priority value: 22
        High port priority value: 13
        Switch priority value: 4
        Port 1 status: Connected
        Port 2 status: Connected
        Neighbor on port 1: 503d.e543.7380
        Neighbor on port 2: 503d.e543.7380
After connecting Poe devices ( 1131AG ap )  to the switch , we are getting below message :
Error Message    PLATFORM_STACKPOWER-4-UNDER_BUDGET: Switch 2 does not have
sufficient power budget
I tried to paste the same output in output interpreter but there is no workaround given for the same.
Please suggest me for the same.
In the mean time, i will get details which leolahoo has mentioned .

Similar Messages

  • UTP Cable Length for AP connect to POE Switch

    Dear All,
    What is the limitiation on the length of UTP Cable for connect AP to POE Switch.
    Thanks.
    C.K.

    I believe it's consistent with the limits for structured cabling: 100 meters end-to-end, assuming the cabling system is compliant with EIA/TIA sandards.
    Good Luck
    Scott

  • Adding a PoE Switch to existing Network

    Hello,
    Currently we have a Linksys RV016 router with 3 Linksys SRW224G 24-Port Managed Switch. Can I add a PoE switch to my existing setup without any problems or I can only add none PoE switches?
    If I can add a PoE switch is there a specific configuration or just plug and play?
    Thanks,
    B

    Yes you can connect a PoE switch to the SRW224G switches but you will need to connect the PoE switch to a power supply. The only way that PoE (Power over Ethernet) will work is when you connect the PoE switch with another PoE switch. Only in this scenario, you won’t need to use a separate power supply for the PoE switch to work because it is getting its power form the first PoE switch / router.  
    Regarding if this will just be plug and play, it won’t be plug and play. If you have set up VLANs or other crucial settings in the other switches and you want it to manually set the PoE switch depending on the limitations you want for these PoE switches.

  • WLC2106 AP Connected to PoE port not detected

    I have a WLC 2106. It is currently working as expected over AP's that are connected via a remote PoE switch. I wish to attach an AP to one of the local PoE ports.
    On a different site we have an identical WLAN controller that was setup before my time, but it is working with an AP attached to a PoE port on the controller.
    I can't get this to work on the new controller.
    I have read this : https://supportforums.cisco.com/document/53421/connecting-aps-directly-2106
    and this : https://supportforums.cisco.com/document/44841/cisco-2100-series-wireless-lan-controllers-best-practices
    and I understand that the configuration I want isn't considered best practice but it is still one I would like to use, I know that it should work as I have a currently functioning example.
    From the first document I have linked I have a configuration that matched 'option 2'. I have everything assigned to port 1, AP-MANAGEMENT is untagged and has a DHCP server configured to the DHCP server for the network, and the DHCP server is on the same network as the AP-MANAGEMENT interface.
    CDP ALL shows the three AP's that are on the network but not the one that is directly connected.
    (Cisco Controller) >show interface summary
    Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
    ap-manager                        1    untagged 10.20.0.13      Static  Yes    No
    guestwifi                              1    9        192.168.0.3     Dynamic No     No
    management                       1    100      10.20.0.12      Static  No     No
    virtual                                     N/A  N/A      1.1.4.1         Static  No     No
    The only difference I can see between the two controllers is the software version, with the new one being 7.0.2 and the older one being 7.0.1
    Any thoughts?

    Hi.
    First you need to make sure the port is enabled with power.
    WLC> Config port power all enable
    Then make sure the AP have an IP address, otherwise it will not make a join request.
    On the AP config this:
    capwap ap ip address [IP address] [mask]
    capwap ap ip default-gateway [address for the gateway]
    capwap ap controller ip address [management interface address on the WLC]
    The AP will the join the WLC.

  • T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

    Hi,
    I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
    to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
    monitor, when connected via the KVM switch.
    I tried:
    A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
    B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
    C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
    D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
    So I have a workaround, but leaving out the KVM switch is not a long term option.
    This is all on Win 7 professional / 64bit
    Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
    SURPRISE: during driver install, the monitor WAS detected!!!
    SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
    CONCLUSION:
    Seems like a software issue with the Intel HD Graphice driver.
    ANY HINT/COMMENT/HELP highly appreciated!
    Thanks,
    Michael

    hey mgold,
    as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
    I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

    I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

    You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
    If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

  • I connect my iPhone to apple, and it says its charging.  However it is not coming up in iTunes so i can add music?

    I connect my iPhone to apple, and it says its charging.  However it is not coming up in iTunes so i can add music?  My phone and iTunes are both upgraded to the latest version.  When i go on my computer, my iPhone is under devices.
    Any suggestions to solve this? 
    Much appreciated.

    Hi Charlesweeks,
    If you are having issues with your iPhone not being recognized in iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • PCs connecting to ME3400 Switch not pinging to each other!!

    hi,
    We have a new ME-3400-24TS-A Switch.Its a 24 10/100 Mbps switch.But when we connect the two PCs on its any of the two ports ,they are not pinging to each other.Both the PCs are in the same Network.
    basic switching is not happening.Kindly help me!!The IOS version is :S340XBT-12225SEG
    Cisco ME 340X SERIES IOS METRO BASE W/O CRYPTO TAR

    The ports in the same vlan don't do local switching per default on a ME3400. You have to enable local switching for a vlan with the commands "vlan xxx" and "uni-vlan community".
    But, only 8 ports can be in the same vlan. So, maybe you have choose the wrong switch if you need a normal L2 switch. Normally, in Metro Ethernet you don't want local switching between user ports.
    I hop this helps. Please rate all posts.
    Cheers
    Rene

  • When i try to connect my Iphone it says the url could not be opend?...my phone is not coming up,please will you help,thanks

    When i try to connect my Iphone it says the url could not be opend?...my phone is not coming up,please will you help,thanks

    Try deleting the iPod Photo Cache folder. If location can be found here:
    iTunes: Understanding the iPod Photo Cache folder

  • Catalyst 3560 24 port-PoE switch powers on but no STAT LED and console not responding

    I rebooted my Catalyst 3560 24 port PoE switch and when it turned on only the STAT LED went green the other LEDs are off.  I get no response from the console port using putty and the cable I used before this happened.  I tested the cable on another switch and it works fine with putty.  What can I do with this switch?

    This unit was purchased before I came to our company.  There is no support or maint contract.  I'm sure the unit is several years old...we'll call the vendor and see what they'll do..not expecting much.

  • My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

    My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

    Hi HARISH INDIA,
    That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information. 
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT201263
    Take it easy,
    -Norm G. 

  • Problem in connecting ESW 520 POE switches

    Hi
    New on ESW 520 switches
    Need help to configure the ESW 520  24 POE switches
    How can i configure the last port of 24 to oonnect to another ESW 520 24 port switches ?

    Why not use the GE ports at the far right to chain the switches one to the other from the UC540/UC560?  They are best for this and gives you an extra port on the switch this way.  Use straight thru ethernet cables.

  • My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    settings - general - reset - reset network settings.

  • Dispatcher is not coming up

    Hi all,
    One of the apps in the production system is not coming up after the windows patching,  there are 2 servers in the same box  the other one came up fine with no issues.
    Even the Work process  log is also not generated.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    trc file: "dev_disp", trc level: 1, release: "46D"
    Tue Jun 21 15:11:31 2011
    relno      4640
    patchlevel 0
    patchno    2513
    intno      0
    pid        13548
    ***LOG Q00=> DpSapEnvInit, DPStart (71 13548) [dpxxdisp.c   921]
    Tue Jun 21 15:11:35 2011
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust your DNS settings [dpxxtool2.c  3171]
    MtxInit: -2 0 0
    DpIPCInit: start server >xxxx_71     <
    ERROR => DpShMCreate: ShmCreate SHM_DP_ADM_KEY [dpxxtool2.c  1335]
    ERROR => DpIPCInit: DpShMCreate [dpxxtool2.c  409]
    DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    call semaphore clean-up function ...
    ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c   390]
    C-STACK -
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Application exception occurred:
    Exception : c0000005 (Access Violation)
    App       : disp+work.exe (pid=13548)
    When      : 6/21/2011 15:11:35.782
    Threads   : 2
    Computer Name       xxxxxx
    User Name           : SAPServicexxx
    Number of Processors: 32
    Processor Type: EM64T Family 6 Model 46 Stepping 6
    Windows Version     : 5.2 Current Build: 3790
    Stack Dump for Thread Id 3ca8
    eax=00000000 ebx=00000003 ecx=016ea020 edx=0319f68c esi=00000000 edi=00000000
    eip=00427bcb esp=0319fdf8 ebp=00000000 iopl=0         nv up ei pl nz na po nc
    cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
    function : <nosymbols>
            00427bb0 ff742404         push    dword ptr [esp+0x4]    ss:0633e6a3=????????
            00427bb4 ffd0             call    eax
            00427bb6 59               pop     ecx
            00427bb7 c3               ret
            00427bb8 a1bcf06c01       mov     eax,[016cf0bc]         ds:016cf0bc=00000000
            00427bbd 56               push    esi
            00427bbe 57               push    edi
            00427bbf 8b7c240c         mov     edi,[esp+0xc]          ss:0633e6a3=????????
            00427bc3 8bf7             mov     esi,edi
            00427bc5 69f698020000     imul    esi,esi,0x298
    FAULT-> 00427bcb 837c064800     cmp dword ptr [esieax0x48],0x0 ds:0319e8ab=467f0048
            00427bd0 7f46             jg      00427c18
            00427bd2 833db89f6e0101   cmp   dword ptr [016e9fb8],0x1 ds:016e9fb8=00000003
            00427bd9 0f8c45030000     jl      00427f24
            00427bdf e8ad910a00       call    004d0d91
            00427be4 68310a0000       push    0xa31
            00427be9 689060d400       push    0xd46090
            00427bee e8e6d0ffff       call    00424cd9
            00427bf3 59               pop     ecx
            00427bf4 50               push    eax
            00427bf5 689c60d400       push    0xd4609c
            00427bfa 68bc9f6e01       push    0x16e9fbc
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    00000000 00000000 00000000 00000000 00000000 00000000 disp+work!<nosymbols>
    Stack Dump for Thread Id 2f70
    eax=00000000 ebx=0036f190 ecx=00000000 edx=00000000 esi=77bd0888 edi=00000000
    eip=7d61cd3e esp=0769fc78 ebp=0769fcb8 iopl=0         nv up ei pl nz na pe nc
    cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000202
    function : NtFsControlFile
            7d61cd29 b836000000       mov     eax,0x36
            7d61cd2e b91b000000       mov     ecx,0x1b
            7d61cd33 8d542404         lea     edx,[esp+0x4]          ss:0a83e523=????????
            7d61cd37 64ff15c0000000   call   dword ptr fs:[000000c0] fs:000000c0=????????
            7d61cd3e c22800           ret     0x28
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0769fcb8 00c38ed8 000004f4 00000000 00000000 0036f0f8 ntdll!NtFsControlFile
    0769ff84 77bcb530 00000000 00000000 00000000 0036f190 disp+work!<nosymbols>
    0769ffb8 7d4dfe37 0036f190 00000000 00000000 0036f190 MSVCRT!endthreadex
    0769ffec 00000000 77bcb4bc 0036f190 00000000 00000000 kernel32!FlsSetValue
    call clean-up function ...
    SigICallExitRoutine: call exithandler (DpHalt)
    DpHalt: shutdown server >mudpap01_UDP_71     <
    Switch off Shared memory profiling
    not attached to the message server
    ***LOG Q05=> DpHalt, DPStop ( 13548) [dpxxdisp.c   7267]
    removing Event-Managment
    ERROR => EvtRmMgt: Evt Mgt Table not init'd [evtnt.c      360]
    (didn't work)
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup SHM_DP_ADM_KEY
    ERROR => ShmDelete: Inv. Key=2  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 2 [shmnt.c      747]
    ShmCleanup SHM_DP_CA_KEY
    ERROR => ShmDelete: Inv. Key=3  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 3 [shmnt.c      747]
    ShmCleanup SHM_PF_KEY
    ERROR => ShmDelete: Inv. Key=4  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 4 [shmnt.c      747]
    ShmCleanup SHM_PRES_BUF
    ERROR => ShmDelete: Inv. Key=14  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 14 [shmnt.c      747]
    ShmCleanup SHM_CALI_BUFFER
    ERROR => ShmDelete: Inv. Key=11  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 11 [shmnt.c      747]
    ShmCleanup SHM_DB_TBUFF
    ERROR => ShmDelete: Inv. Key=19  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 19 [shmnt.c      747]
    ShmCleanup SHM_DB_TBUFF_P
    ERROR => ShmDelete: Inv. Key=33  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 33 [shmnt.c      747]
    ShmCleanup SHM_DB_STBUFF
    ERROR => ShmDelete: Inv. Key=41  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 41 [shmnt.c      747]
    ShmCleanup SHM_DB_TTBUFF
    ERROR => ShmDelete: Inv. Key=42  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 42 [shmnt.c      747]
    ShmCleanup SHM_DB_FTBUFF
    ERROR => ShmDelete: Inv. Key=43  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 43 [shmnt.c      747]
    ShmCleanup SHM_DB_SNTBUFF
    ERROR => ShmDelete: Inv. Key=45  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 45 [shmnt.c      747]
    ShmCleanup SHM_DB_IRBUFF
    ERROR => ShmDelete: Inv. Key=44  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 44 [shmnt.c      747]
    ShmCleanup SHM_DB_OBJ_BUFFER
    ERROR => ShmDelete: Inv. Key=54  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 54 [shmnt.c      747]
    ShmCleanup SHM_ROLL_AREA_KEY
    ERROR => ShmDelete: Inv. Key=9  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 9 [shmnt.c      747]
    ShmCleanup SHM_PAGING_AREA_KEY
    ERROR => ShmDelete: Inv. Key=8  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 8 [shmnt.c      747]
    ShmCleanup SHM_ROLL_ADM_KEY
    ERROR => ShmDelete: Inv. Key=17  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 17 [shmnt.c      747]
    ShmCleanup SHM_PAGING_ADM_KEY
    ERROR => ShmDelete: Inv. Key=18  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 18 [shmnt.c      747]
    ShmCleanup SHM_PXA_KEY
    ERROR => ShmDelete: Inv. Key=6  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 6 [shmnt.c      747]
    ShmCleanup SHM_ENQ_TABLE_KEY
    ERROR => ShmDelete: Inv. Key=34  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 34 [shmnt.c      747]
    ShmCleanup SHM_ENQID_KEY
    ERROR => ShmDelete: Inv. Key=58  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 58 [shmnt.c      747]
    ShmCleanup SHM_VB_ADM_KEY
    ERROR => ShmDelete: Inv. Key=7  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 7 [shmnt.c      747]
    ShmCleanup SHM_DB_POOL
    ERROR => ShmDelete: Inv. Key=40  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 40 [shmnt.c      747]
    ShmCleanup SHM_EM_ADM
    ERROR => ShmDelete: Inv. Key=51  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 51 [shmnt.c      747]
    ShmCleanup SHM_MSBUF
    ERROR => ShmDelete: Inv. Key=52  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 52 [shmnt.c      747]
    ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
    ERROR => ShmDelete: Inv. Key=30  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 30 [shmnt.c      747]
    ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
    ERROR => ShmDelete: Inv. Key=56  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 56 [shmnt.c      747]
    ShmCleanup SHM_POOL_0
    ERROR => ShmDelete: Inv. Key=10  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 10 [shmnt.c      747]
    ShmCleanup SHM_PROFILE
    removing Semaphore-Management
    removing Request Queue
    ERROR => ShmDelete: Inv. Key=31  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 31 [shmnt.c      747]
    ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c   558]
    closing connect handles (dgm + tcp)
    ***LOG Q05=> DpHalt, DPStop ( 13548) [dpxxdisp.c   7454]
    return from clean-up function ...
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Changed the extendend memory and other parameters  still not able to bring  it up...
    Please suggest...
    Thanks,
    Subhash.G

    Hi,
    sappfpar result , no errors and warnings reported.
    +++++++++++++++++++++++++++++++++++++++++++++++
    Shared memory disposition overview
    ================================================================
    Key:        1  Size:        2000 (   0.0 MB) System administration
    Key:        2  Size:    18828644 (  18.0 MB) Disp. administration tables
    Key:        3  Size:   178144000 ( 169.9 MB) Disp. communication areas
    Key:        4  Size:      541048 (   0.5 MB) statistic area
    Key:        5  Size:        4096 (   0.0 MB) SCSA area
    Key:        6  Size:   851968000 ( 812.5 MB) ABAP program buffer
    Key:        7  Size:       14838 (   0.0 MB) Update task administration
    Key:        8  Size:   134217828 ( 128.0 MB) Paging buffer
    Key:        9  Size:   134217828 ( 128.0 MB) Roll buffer
    Key:       11  Size:      500000 (   0.5 MB) Factory calender buffer
    Key:       12  Size:     3000000 (   2.9 MB) TemSe Char-Code convert Buf.
    Key:       13  Size:    10500000 (  10.0 MB) Alert Area
    Key:       14  Size:    58500096 (  55.8 MB) Presentation buffer
    Key:       16  Size:       22400 (   0.0 MB) Semaphore activity monitoring
    Key:       17  Size:      753764 (   0.7 MB) Roll administration
    Key:       18  Size:      458852 (   0.4 MB) Paging adminitration
    Key:       19  Size:   460000256 ( 438.7 MB) Table-buffer
    Key:       30  Size:       91500 (   0.1 MB) Taskhandler Runtime Admin
    Key:       31  Size:     4206000 (   4.0 MB) Dispatcher request queue
    Key:       33  Size:    61440000 (  58.6 MB) Table buffer, part.buffering
    Key:       41  Size:     9010000 (   8.6 MB) DB statistics buffer
    Key:       42  Size:    52900592 (  50.4 MB) DB TTAB buffer
    Key:       43  Size:    87894392 (  83.8 MB) DB FTAB buffer
    Key:       44  Size:    46934392 (  44.8 MB) DB IREC buffer
    Key:       45  Size:    29526392 (  28.2 MB) DB short nametab buffer
    Key:       46  Size:       20480 (   0.0 MB) DB sync table
    Key:       47  Size:    71681024 (  68.4 MB) DB CUA buffer
    Key:       48  Size:      300000 (   0.3 MB) Number range buffer
    Key:       49  Size:     2769392 (   2.6 MB) Spool admin (SpoolWP+DiaWP)
    Key:       51  Size:     3200000 (   3.1 MB) Extended memory admin.
    Key:       52  Size:       40000 (   0.0 MB) Message Server buffer
    Key:       54  Size:   262152192 ( 250.0 MB) Export/Import buffer
    Key:       55  Size:        8192 (   0.0 MB) Spool local printer+joblist
    Key:       57  Size:     1048576 (   1.0 MB) Profil in shared Memory
    Key:       58  Size:        4096 (   0.0 MB) EnqId
    Key:     1002  Size:      400000 (   0.4 MB) Performance monitoring V01.0
    Nr of operating system shared memory segments: 36
    Shared memory resource requirements estimated
    ================================================================
    Total Nr of shared segments required.....:         36
    Shared memory segment size required min..:  851968000 ( 812.5 MB)
    Swap space requirements estimated
    ================================================
    Shared memory....................: 2370.2 MB
    Processes........................:  468.3 MB
    Extended Memory .................: 10260.0 MB
    Total, minimum requirement.......: 13098.4 MB
    Process local heaps, worst case..: 1908.0 MB
    Total, worst case requirement....: 15006.4 MB
    Errors detected..................:    0
    Warnings detected................:    0
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    We are windows 2003 with sqlserver 2005, is there any  equal command as cleanipc in UNIX for windows to clean the share memory .
    Thanks,
    Subhash.G

  • Cisco 4503 "1000BaseLH" SFP light is not coming ---- Urgent

    Dear Team,
    I have Cisco 4503 and I have inserted 1000BaseLH and light is not coming up but for 1000BaseSX its fine.
    Please suggest.
    CORE#show int GigabitEthernet1/18
    GigabitEthernet1/18 is down, line protocol is down (notconnect)
      Hardware is Gigabit Ethernet Port, address is 001e.4aa6.b891 (bia 001e.4aa6.b891)
      MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, Auto-speed, link type is auto, media type is 1000BaseLH
      input flow-control is off, output flow-control is off
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input never, output never, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         Received 0 broadcasts (0 multicast)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
         0 output errors, 0 collisions, 0 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    CORE#show inventory
    NAME: "GigabitEthernet1/18", DESCR: "1000BaseLH"
    PID: TRF5735AALB202    , VID: A1 , SN: OPA11241478
    Thank You,
    Abhisar.

    Dear Reza,
    we connected cable and it came up. The conclusion is single m9de sfps does not show light where multimode sfp shows light when sfp is connected on switch port.
    Thank you for your suggesion.
    Thank You,
    Abhisar.

Maybe you are looking for