AP - DME File creation Process
We are in the new SAP Implementation. For this we have configured the F110 Automatic Payment Program.
We have now 3 Invoices ready for payment - one for Wire, Check & ACH
We want to create the DME files for ACH and Wire & Print the Check.
Would some one explain me the steps involved please?
Thanks a lot.
V
Hi,
My client also has a requirement to implement ACH CCD+ using Payment Medium Workbench for payments to vemdors.
Currently we have the check method and below procedure is followed:
1) Execute F110
2) A text file is created though a custom program ZFCHX: "Positive Pay File File: Check Extract Creation"
3) The file is uploaded to bank server
4) After some days, "check clearing.txt" file is downloaded from the bank. (BAI Format)
5) The downladed file is processed through transaction FF_5 "Bank Statement: Various Formats (SWIFT, MultiCash, BAI...)
(Clearing sub bank account with main bank account)
6) Then use transaction code FEBAN to process if anything didnt get posted.
ACH CCD+:
I have configured almost all of the settings ( i think so). In testing client, I made couple of invoices for 2 vendors, then executed F110 and was able to generate the DME file (txt format). For testing purpose, it was sent to the bank and was processed successfully. Now the bank has sent back a file. According to the bank, one file is "transaction journal".
Transaction Journal File: L20TRNR
I have no clue what format are these. Whenever i open them it asks for the program and normally i am using notepad to open them. But once opened through notepad, the data looks messed up. So i dont know which program should i be using to open them. And its not a BAI format, multi cash etc. And it has the basic details like total payment, our bank details etc The bank says there wont b any other file sent back.
After getting the file from the bank, i am stuck now. Dont know how to proceed further.
What to do with this file? Do we have to upload them ; if yes then how? Are these to be converted to some other format and then uploaded in SAP? Or should i be expecting some other file? Will there be any file for bank reconciliation (for clearing sub bank and main bank account). My main issue is running FF_5 and posting the clearing entries but I don't know how to do it with this file.
So i'll really appreciate if anyone can let me know ALL the steps to go further from here. I mean after receiving the files what steps need to be followed to finish the process. And if there is any configuration left, what is it. Any immediate help would be greatly appreciated.
Thanks.
Similar Messages
-
User exit in after DME file creation
Hi ABAPers,
Firstly I'm an FI consultant and dont know anything about ABAP coding.
My company is using DME to create an EFT file for the AP payment run and for the Payroll payments. This file is dropped into a secure location on our file server. We have a function module which sends an idoc to our middleware in order to pick up the file and transmit it to the bank. I'd like to call this function module automatically once the file has been written to the file server.
Can you please advise if there is a user exit in the program which can be used for;
A) Payroll file
B) AP Payment file
Or is there one user exit which can be used in the DME creation process?
PS: Please dont copy and past a bunch of user exit names in here unless they are relevant to my question
thanksHi Philip,
I think we can go ahead, with program SAPFPAYM.
There is an enhancement point in
INCLUDE fpaym_end. "End Of Selection of program SAPFPAYM. At the end of this include you can call your function module.
You may need the help of an ABAPer to call your FM,as this FM may need some inputs, which may or may not available within the program SAPFPAYM.
IF you need to pass any thing through the selection screen of this program,(for ex:path of the file), you can even make it available with the help enhancement point available with INCLUDE fpaym_top. "Global Data Declarations in program SAPFPAYM.
Thanks and Regards,
Antony Thomas -
Dear All,
User has run FBWE for few Bill of Exchange transaction, after the posting completed it should generate a DME file for Bank, user has sucessfully able to post the document, but the DME file did not get generate, for the same ID its showing printing data and log deleted.
Is there any way to regenerate the file through the same print medium program, if you have any idea on this please suggest.
Thanks
PrakashHello Arvind,
Thanks for your answer, I already check the unix file path and also the print program assinged in F110.
I found one program RFFBWEOO to regenrage the DME file, when I am populating the input data its showing the same run ID already exist.
Thanks
Prakash -
Hi all,
my client needs to do the payments for vendors in electronic format. for this i know only for electronic payments we use file DME.
How we create DME file in F110? and how this file fits for bank given specification? after payments made from bank (sending this file to bank and bank will pay) how the bank file we upload and post?
kindly send me any docs regarding config.of DMEE and upload also.
Thanks in advance,
i will assure points.
SomaDear Soma,
For DME file generation you need to first make the set up in SPRO and then while running the printout in F110, it will get generated. Then you can doenload the fle from FDTA and can upoad it to bank site.
The standard documentation on this from SAP is:-
http://help.sap.com/erp2005_ehp_03/helpdata/EN/cb/4104aadf2b11d3a550444553540000/frameset.htm
Regards,
Gaurav -
Hi,
we are implementing International HRMS and payroll becuase of out legislation not avaliable in oracle HRMS and payroll.
From the international HRMS implementation manaul saying that , we need to do extra setup for implementing EFT and Payroll archive process.
How I can use this Spawned "PYUGEN" for EFT and payroll archive.
I will appreciate if some body can give some guidance or some example related this
Regards
Satheesh KumarHi,
We made the EFT working the "integrated" way, so via the PYUGEN executable, and with the business logic (file format) in fast formulas.
The realisation required:
- some plsql coding
- inserts into seeded tables
- fast formulas with specific inputs and outputs naming conventions
But it was not that easy, and we found no documentation.
So it came basically down to trial and error, or reverse enginerring.
If you want to discuss this further, please contact me at thierry at popay dot be. -
F110 - How to prevent multiple creation of DME file?
Hello,
I need to prevent multiple creation of DME file for the same Payment Run (after it has been created once).
"Printout" bottom creates DME file and Payment Advice any time you trigger it.
I'm searching for some User Exit / BAdi / Function that will help me to add ABAP code that will check if DME file has already been created.
Thank You in AdvanceHello,
Please check if the flag "Create payment medium" is not flagged at the proposal and the payment run file.
If it is flagged the payment file will be generated. Also when you press the print out button, the print program will be called and the system will try to created a new payment file.
In order to avoid duplicated payments you should consider using the flag 'Payment Document Validation" in your print program.
If the 'Payment Document Validation' parameter is not set ON, documents already processed for payment can be selected and paid again in a subsequent payment run, when posting terminations have occurred.
Please refer to SAP Knowledge Base Article 1713825 in order to activate Payment Document Validation.
Another option is to suppress the"Create Payment Medium" flag at Proposal Run.
In this case you should check the following information:
Please restrict the activity 15 of object F_REGU_BUK in the user
profile/role
You may also refer to the available activities on this:
- 02 Edit parameters
- 03 Display parameters
- 11 Execute proposal
- 12 Edit proposal
- 13 Display proposal
- 14 Delete proposal
- 15 Create payment medium proposal
- 21 Execute payment run
- 23 Display payment run
- 24 Delete payment run payment data
- 25 Create payment media of payment run
- 26 Delete payment orders of payment run
- 31 Print payment medium manually
Kind Regards,
Fernando Evangelista -
F110 - How to prevent the creation of DME file in Proposal Step
Hello,
I would like to prevent the creation of DME file in Proposal Step of Payment Run (F110).
Is it possible to suppress "Create Payment Medium" checkbox?
Many ThanksIf you are using the Payment Medium Workbench, there is perhaps a solution:
I found the following code in function module FI_PAYMEDIUM_OFX_20
* We abort the payment if the data is from a payment proposal. With
* OFX we can pay only if the data does not come from a payment
* proposal.
IF I_FPAYH-XVORL = 'X'.
MESSAGE E404 WITH I_FPAYH-LAUFD I_FPAYH-LAUFI
RAISING CANCEL_PAYMENT_MEDIUM.
ENDIF.
So I think it may be possible to solve your problem by using the event modules in transaction OBPM3, with your own function module based on the code given above. I have not tested such solution and I have no experience with these events, but I'm currently trying to use them for another problem. -
F110S runs for a long time to produce DME file
A batch job schduled for "daily payment run + creation of DME files" using F110S (SAP ECC 6.0) . The batch is running in production for more than 20 hours to process payment against just single invoice.
The job runs in following 2 steps
1. SAPF110S which processes the payment clears FBL5N.
2. SAPFPAYM_SCHEDULE.
The second step seems a non-ending process.
The job variant has only 15 customers, only one invoice is to be processed against one account.
However in quality system the same job with more than 10,000 customer account range with more than 10 invoices runs just in few minutes.
Any idea or suggestion why it's taking so long in production? Any missing configuration in production server?It's not performance issue. When we run F110S or F110 in production with individual login id, program runs the way it should and finishes in reasonable time (for example the scenario I described in question finsihes in few seconds).
The problem occurs only when production batch job runs with job scheduler; program seems looping somewhere for infinite time - to be particular it keeps reading the table TPRI_DEF which has just few records (must be reading this table inside a loop). -
DME file regeneration from FBWE transaction
Hi all
It is possible regenerate the DME file from FBWE transaction, after have already completed the registration process? I know from f110 you can make launching the print process, but from FBWE?
thanks
DavideWhen we press this button the file is not displayed because before the file creation our system sends a dump with message ...
Error CONVT_CODEPAGE
A character set conversion is not possible
At the conversion of a text from codepage '4103' to codepage '1100'.
How can we re-print the file in order to investigate where the problem is?
Thank you,
Óscar -
Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)That is an issue for the developer of that Download Helper.
-
Hi.
I have to create multiple files for mulitiple plants entered through select-options.
I have done this for single file but not getting the idea how to do it for multiple files.
<u><b><b>My work:</b></b></u>
*File creation
CONCATENATE
c_path "file path
c_qm " 'QM'
c_underscore "underscore
c_results " 'RESULTS'
c_underscore
s_werks "plant
c_underscore
sy-datum+4(2) "system date
sy-datum+6(2)
sy-datum+0(4)
c_underscore
sy-uzeit+0(2) "system time
sy-uzeit+2(2)
c_ext "file extension
INTO g_file_name.
ENDLOOP.
Open File on the application server for processing
OPEN DATASET g_file_name FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc NE 0.
*Display error message
MESSAGE i055. " Error in opening file
LEAVE LIST-PROCESSING.
ELSE.
LOOP AT i_final INTO wa_final.
TRANSFER wa_final TO g_file_name.
ENDLOOP.
ENDIF.
CLOSE DATASET g_file_name.
Then i am updating the database table using i_update
Work Area for Z_DATADOWNLOAD table
DATA: l_wa_update TYPE ztable
l_wa_update-prog_name = g_repid.
l_wa_update-plant = s_werks.
l_wa_update-last_run_dt = g_sysdate.
l_wa_update-last_run_tm = g_systime.
MODIFY ztable FROM l_wa_update.
Pls let me know how to manage this for multiple files.Hi Simran.
Consider this code.
REPORT zztest.
TABLES : t001w.
*Declare one Internal table for werks
DATA :BEGIN OF it_werks OCCURS 0,
werks TYPE t001w-werks,
END OF it_werks.
*Select options
SELECT-OPTIONS : s_werks FOR t001w-werks.
START-OF-SELECTION.
*GEt all the plants entered in selection screen from
*DB table <b>T001W (Plants/Branches)</b>
SELECT werks FROM t001w INTO TABLE it_werks WHERE werks IN s_werks.
*Loop that internal table
<b> LOOP AT it_werks.</b>
CONCATENATE
c_path "file path
c_qm " 'QM'
c_underscore "underscore
c_results " 'RESULTS'
c_underscore
<b> it_werks-werks "Plant</b>
c_underscore
sy-datum+4(2) "system date
sy-datum+6(2)
sy-datum+0(4)
c_underscore
sy-uzeit+0(2) "system time
sy-uzeit+2(2)
c_ext "file extension
INTO g_file_name.
<b>*Now you have the file path for the werks
*Open File on the application server for processing</b>
OPEN DATASET g_file_name FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc NE 0.
*Display error message
MESSAGE i055. " Error in opening file
LEAVE LIST-PROCESSING.
ELSE.
LOOP AT i_final INTO wa_final.
TRANSFER wa_final TO g_file_name.
ENDLOOP.
ENDIF.
CLOSE DATASET g_file_name.
* Then i am updating the database table using i_update
* Work Area for Z_DATADOWNLOAD table
DATA: l_wa_update TYPE ztable
l_wa_update-prog_name = g_repid.
l_wa_update-plant = s_werks.
l_wa_update-last_run_dt = g_sysdate.
l_wa_update-last_run_tm = g_systime.
MODIFY ztable FROM l_wa_update.
*Pls let me know how to manage this for multiple files.
<b> ENDLOOP.</b>
Regards,
Arun Sambargi. -
How can I change the file creation date?
I recently downloaded more than 1,000 photos from my vacation. I'm preparing to burn DVDs for a friend, and I noticed that when I copy the photos to the desktop, they don't all have the same date. I have read a couple of discussions here about the difference between photo creation date and file creation date, and I understand the difference. But something seems odd to me.
For purposes of illustration, let's take two photos: "A" was taken with the camera in the landscape position (how one normally holds a point-and-shoot); "B" was taken with the camera held in the portrait position (rotated 90 degrees). The photos were taken on April 24, about three minutes apart, but not imported into iPhoto until May 19.
In iPhoto, both files show the actual creation date. Yay!
The problem is with the files after having been copied to the desktop.
When copied to the desktop, the info panel for photo "A" shows April 24 for both the "created" and "modified" dates. Photo "B," however, shows May 19 for the "created" and "modified" dates.
Apparently, when the "B-style" photos were imported into iPhoto, the app automatically rotated them so that they are viewed correctly (without having to turn your head sideways). This is a very nice feature, but the result is that the file date changes.
Is there any way to change this? I want the DVD to show the date the photo was created, not imported to iPhoto. Picky, I know … but I'm like that.Apparently, when the "B-style" photos were imported into iPhoto, the app automatically rotated them so that they are viewed correctly (without having to turn your head sideways). This is a very nice feature, but the result is that the file date changes.
Correct. Your camera has an Auto-Rotate feature. However, the camera does not actually rotate any pixels in the file, but instead flags it with an instruction: "Display me this way". This is a tag in the Exif metadata. When you import a file with this tag iPhoto creates a modified version. It does this because most of the apps that integrate with it - email clients, word processors etc - simply don't understand this Exif tag. So if you used the shot in a word processing doc, uploaded it to many Web site etc, the shot would come out sideways.
iPhoto has nothing to say about File dates. There are various file utilities that will edit the dates on Files
http://www.macupdate.com/app/mac/11143/a-better-finder-attributes
for instance. But there are otheers, search on MacUpdate
Regards
TD -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Maybe you are looking for
-
Who can help me with this form?
Having some problems with the form ive placed on my site. I cant find the problem. Is there someone who can tell me what i have done wrong. you can see the form on. http://www.salontouche.nl/explorers.htm and the error i get is.. Oops! This page appe
-
How do I place a website in a folder of my choosing/creation with the stupid star button?
with 27 I could click on the add button in the website bar and "choose" where to place the website. Now all i have is a star....it just automatically adds it and I have open the side bar, right click, then create the folder, then place the bookmarked
-
I want to convert image height and width into inch .this image in a pdf file and the only information about image is height and width in pixel.actually i want to get resolution of this image in ppi(pixel per inch).if any body have any idea about it t
-
Folks, Does Oracle MFG comes with out of the box web services? If NO,what are compatible webservices available? Thanks -Dat.
-
I created a site and used a dwt file for the inside pages. When you click through the navigation each page seems to shift to the left or right a little bit. What causes this? I checked the masthead images on all pages to make sure the logo and other