AP does not associate with WLC

the wlc send the log:
Feb 11 10:31:48.263 spam_lrad.c:1048 LWAPP-3-DISC_INTF_ERR1: Ignoring discovery request received on non-management interface (2) in L3 LWAPP mode
Any Idea? I review the network configuration and all is fine, I have 3 AP associate without problems but Im trying to add two more and send this log, from the same swithc.

The AP 1242 in this port is working fine:
interface FastEthernet3/7
switchport access vlan 105
switchport mode access
spanning-tree portfast
The AP 1242 in this port does not associate:
interface FastEthernet3/8
switchport access vlan 105
switchport mode access
spanning-tree portfast
The APs are the same and the configuration is the same but one works fine and the other dont.
any Idea?

Similar Messages

  • HT1849 when I download album works from itunes it does not associate with the correct artist

    when I download album works from itunes it does not associate with the correct artist

    Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library

  • Photoshop cc does not associate with psd files?

    I have a simple answer to the problem of photoshop cc not being able to associate psd files and not showing in the options window when you try to associate it with the psd file? How do I get it into the forum where it belongs?

    Photoshop does associate with PSD and PSB files on both platforms.
    It sounds like your OS is confused about the available file associations.
    Which OS version are you using?

  • WRT54GC does not associate with another AP

    I need to extend my WLAN and I am trying to add an AP to the WRT54GC.
    The AP is of another brand (Atlantis A02-AP-W54), it works for sure (when associated to a router of its brand).
    Settings are ok (same channel, ssid, wep), so what could this incompatibility be due to?
    Any workaround? It seems so weird...to me...

    How you have configured this Atlantis A02-AP-W54 ( Repeater / Bridge) mode. To make this A02 to work wirelessly you need to set this A02 in Bridge or Repeater mode, then only it will work wirelessly.

  • Address Book Associates Field does not sync with iPhone

    Apple went to the trouble of getting custom field names in the Mac OS Address Book to synchronize with the iPhone (which is wonderful), but they left one field 'unsyncable'; the associates field. If you list a contact's manager name, spouse name, child name, etc. in Address Book, it does not sync with the iPhone (OS 3.0.1) 'Phone' application. This is very useful (and embarrasment-preventing) when needing to remember the name of a contact's manager, wife, child, etc. Does anyone have any idea why Apple left this out of the sync? Certainly it couldn't have to do with saving memory...

    Oh yes! i have this same problem - i have tried emailing Apple Customer Support but they were unable to help me. They advised me to speak to technical or raise the issue on the Apple Support board (but someone already has!)
    so if someone can help us both out here with how to sync additional field information added on Address Book on Mac to then sync all this additional information to iPhone, we would be greatly appreciative!!Thanks,
    Mark

  • Eprint does not work with 5510 D

    I have tried several email addresses to associate with my 5510 D  but the e-print feature does not work with any of them

    Do you already have ePrint set up on your printer?
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Receipt Qty in AP invoice does not match with actual receipt qty.

    Hello everyone,
    I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
    Thanks,
    Himanshu Gupta

    Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
    thanks for your reply, awaiting your response......
    Himanshu Gupta

  • My Iphone 4 does not come with a SOFTWARE UPDATE option.

    My partner bought my iphone 4 version 4.2 about two years ago from a well known store. He got himself one at the same time but i cannot update mine because it does not come with an option in settings, general that allows me to update it. All of my apps are useless as they need at least iSO5 to run. I cannot check my bank accounts or anything. I have rung and spoke to apple many of times and followed all the steps to try and update. As this is not my fault and the iphone had not been loaded with the correct software there should be something APPLE could do free of charge!!!! I really need help as i cannot afford a replacement or want one. I just dont know what to do anymore!!

    Hi there wishheartgirl,
    You may find the information in the article below helpful.
    iOS 4: Updating your device to iOS 5 or later
    http://support.apple.com/kb/HT4972
    -Griff W. 

  • Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

    I just noticed today that any Graph or PDF report I try to view I get the
    following error - Error from reports from ZAM - File does not begin with
    '%PDF-'. I tried to just save the file and then open it, but get the same
    error. I can open other pdf files I have downloaded from other sites ok.
    Anyone have any idea? I haven't done anything to that server that I am
    aware of in quite a while.
    Thanks
    Bill

    I took a closer look at the files it downloaded, opened them with notepad,
    haer is what it says:
    XSL Transform or subsequent processing failedThe document has no pages.
    "Bill" <[email protected]> wrote in message
    news:2bBtk.2164$[email protected]..
    >I just noticed today that any Graph or PDF report I try to view I get the
    >following error - Error from reports from ZAM - File does not begin with
    >'%PDF-'. I tried to just save the file and then open it, but get the same
    >error. I can open other pdf files I have downloaded from other sites ok.
    >Anyone have any idea? I haven't done anything to that server that I am
    >aware of in quite a while.
    >
    > Thanks
    >
    > Bill
    >

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • Flash player does not work with Ie or Firefox with win 8.1?

    Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
    If I try and install it it says it is already installed. Your onsite  installer says it is not applicable to my machine.
    I have followed all the normal steps re enabling addons and active filters etc.
    all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
    Version of flashplayer is 15....03.......

    Flash Player is a built-in component of Internet Explorer.  There's nothing separate to download or install.
    Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
    For problems where IE isn't being detected by sites that require Flash:
    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Maybe you are looking for