AP Fall back issue for WLC

Hi,
i have two WLC 4402 with same ios 4.2.99.0
& configured fail over based on below link
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#c5
AP failover occurred but the fall back option like primary WLC comes up it does not register with primary all the ap still in secondary. I enable Fall back option also as per the document.
could you guide me how i can troubleshoot this issue..
Thanks..

hi,
the meaning is the secondary WLC is not realsing the IP's for client eventhough the SSId match with extract DHCP scope. DHCP scope is not overlap...
Important.
Primary box is new one with 4.2.99 but the old box had 4.1.x b4 the failover the old box was working & released the DHCP scope for the client. Once we upgraded the old box with 4.2.99 (Failover we need to have both the box with same version) even it is not releasing the DHCP scope if i used as standalone device also.
My doubt is
1. New box if i used as a stand alone it is releasing the DHCP scope for the client
2. Both the new & old box has the same configuration
3. If i used old box as a stand alone device why it is not releasing the DHCP scope (with the same IOS & configuration working perfectly on new box)
4. This issue occured after upgrade the IOS on old box.
Can anyone help me out at earliest.
Thanks

Similar Messages

Disable SSL fall-back for Back To My Mac?

It looks like the latest Snow Leopard update brought with it a fall-back mechanism for Back To My Mac, where instead of IPSEC it would switch to using SSL via port 443, via Apple's proxy server. The SSL mechanism is INSANELY slow - as in "dial-up" kind of slow, and it's useless for all practical purposes.
So the question is: how to disable that fall back and force Back To My Mac to ALWAYS use IPSEC? It seems to switch randomly, without any apparent reason. The only way to force it back to using IPSEC that I've found so far is to completely reboot the computer.
Any ideas?

Do you have OS X 10.7.5 or later and either iPhoto '11 9.2.2 or later, or Aperture 3.2.3 or later, you cando this by signing into your iCloud account in System Preferences>iCloud and enabling Photo Stream, then going to iPhoto>Preferences>Photo Stream (iCloud) and checking Automatic Import. After doing so, photo stream photos will automatically be imported to your iPhoto library where they will not be deleted.

SRM7 WF Fall Back Agents

I would like to configure the fall back agents for the 'Manager of Manager' shopping cart approval process to be the originating users manager. Not all departments in our organization have multiple levels of management but we would still like a second level of approval when the shopping cart amount is greater than 50K. It works when there are multiple managers defined in the org structure, but I get an Agent Determination error when there is only one manager defined.
Is there a quick way to do this?
Thanks
Jon

Saravanan,
I figured out how to get it to determine the originators first level manager and direct the work item there.
The business requirement is for carts over $50K there needs to be a director level approval. In most cases in our organization, the director is the second level manager so the manager of manager agent determination process works perfect. However some departments have one manager/director and only three employees so there is no organizational second level of approval that can be used. In these cases, the manager is the director and needs to approve the cart twice. Using the fall back agent method seems the best approach for these occurances.
Jon.

Fall back systemwhen multiple SAP systems trying to acheive SSO with BOEXI

Friends,
I need a small clarification on ' SSO between BOE XI 3.1 and SAP BI 7' Scenario,
Say when multiple users log on through their SAP EP Portals or Netwever Portals, they use their tokens generated by their respective EP portals which are passed through the 'Web application server' hosting BOE environment.
1) When its a Single EP portal , we can have have a fall back system. when we register its logical name in the CMC of BOE Environment , a typical SNC.But what's the fall back system for multiple SAP systems?
2) Also Whether there are any pit falls via token method when more than one SAP system communicating to BOE?
3) Do we have any documentation for this?
Thanks ,
Sivakanth.

Hi Sivakanth,
the normal scenario for SSO is the following:
When you said ''back end system ', i did not get it.
Enterprise Portal -
(iView)-------> BOE -
> SAP BI <- This is your backend system
Well Could I define more than one logical name there in SNC tab of CMC.?
I assume you have the following situation:
(EP1, EP2, EP3) -
> BOE -
> (SAP BI 1, SAP BI 2, SAP BI n)
You can define more than one entitlement systems in the BOE CMC and also configure for each one of them for SNC. Please note that we are talking about server trust and NOT client trust here. It is all about letting your sap system and the boe system trust each other. If you have your portal with client SNC configured (ie. the user logs using a certificate and an SAP logon ticket is created) it is NOT necessary to configure SNC in the CMC (Please refer to the section "Configuring SAP Server-Side Trust" in the installation guide for the integration kit for SAP) side.
Back to the SSO scenario now: When a user connects from an enterprise portal on the BOE system the logon ticket, generated from the portal, is forwarded to the back-end system, which is defined in the portal iView the user is currently navigating through. If it is a Crystal Enterprise iView then you just have to select the appropriate system alias of your back-end system in the System drop down menu when creating the iView. For URL iViews you must utilize the relevant openDocument parameters. If you do not define anything at all when creating the iView then BOE tries to authenticate the logon ticket against the SAP BI system you selected to be the default one in the "Authentication->SAP->Options" tab of the CMC.
If what you want is just to distribute the load between your SAP back-end systems then you should consider utilizing an SAP cluster for your pursposes. As explained before BOE will not distribute the requests evenly on the back-end systems. It will try to contact either the system defined in the request (iView) or the default system. To be honest I am not sure what happens if the explicitely defined system is not available but I think that an error message is what you should expect then. I do not think that in this case the BOE system tries to use the system defined as default.
Another part is what kind of security is defined in BEX querys..as i read from SAP IK guide, we can import all the roles which are defined at ABAB level.
Will there be any security threats to SAP data via this method.
It is true that you can import all roles in your BOE system. But keep the following four things in mind:
1) You can restrict on the BOE side the users which are authorized to logon in the CMC and import the roles (normally only the BOE administrator is authorized to do this)
2) Importing a role means that an SAP user can try to logon the BOE. Still the logon process can only be succesfull only if the SAP user has special authorization on the SAP side (Please check the Appendix "Authorizations" in the installation guide of the integration Kit for SAP.
3) You can restrict the access to data by assigning authorizations only for specific infoareas/infoproviders. In order to partially restrict data access in a given infoprovider (e.g infocube or multiprovider) you can utilize authorization variables in your BW query.
4) You can further restrict access on specific reports either on the BOE side or on the portal side (by rstricting access to the defined iViews).
For sure you must invest some time to define and implement your security concept.
More over could you please answer other 2 questions in my original question.
2) Also Whether there are any pit falls via token method when more than one SAP system communicating to BOE?
3) Do we have any documentation for this?
2) As long as your portals, the back-end systems and your BOE system are configured correctly for SSO this should not be a problem. Well just a tip based on my experience: be sure to use full qualified domain names for your systems in the iView definitions. And do not forget SSO works only if all systems are in the same domain.
3) As said in my previous posting the netweaver documentation regadring SSO setup maybe interesting for you. As far as I know the multiple systems scenario is not contained explicitely in any official BOBJ documentation. I assume that you already went through the installation guide for the integration kit for SAP.
Please tell me if you have a completely different scenario in mind
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Mar 22, 2009 12:27 AM

How do I know WinRM uses Kerberos for authentication, and does not fall-back to NTLM?

Hi,
How do I know WinRM uses Kerberos for authentication, and does not fall-back to NTLM?
/SaiTech

Hi SaiTech,
Kerberos will be selected by default in an AD domain, The default (assuming the client is in a domain, and is not connecting to itself via 127.0.0.1 or ::1 addresses) is to use Kerberos authentication, and not to fall back to NTLM.
Please also Note that you may have to take some other steps as well to get non-Kerberos authentication working. Specifically, you'd have to set up an HTTPS listener on the remote host, or modify the client's TrustedHosts list.
Refer to:
WINRM kerberos & Negotiate
Authentication for Remote Connections
In addition, you can also use Network Monitor to check the authentication method.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT5035 I had a balance of $5.30 on my account. It disappeared when I added a $25 gift card. I have tried to get this issue resolved thru email. I need a call back. Where do I look to get a call back number for this issue

I have already contacted apple thru email, twice. I don't see that they have an option for a call back for a missing iTunes balance, I did however see where I could get a call back(and did) for not being able to sign in on another device to make a purchase. This problem was resolved quickly for this device. I told this rep about the unresolved problem of the missing iTunes balance and he said he could transfer me but the wait times are very long. In my 2 email correspondences on this missing balance issue both times I was told to check my balance history- which does not resolve the issue that I am having to go thru a huge hassle to get my missing balance back prior to my card purchase. I had a balance of $5.86 show on my ipad2 and on my Mac book pro prior to applying the $25 gift card. Then the balance showed only $25 after apply my gift card, now here's what's weird: aprox. A week and a half later I sign in on my iPod touch and shows a balance of $5.30!, but when it has me resign into iTunes that balance disappeared, and the $25 gift card balance shows up. I made NO PURCHASES to use the $5.86/ or $5.30- so I want my money to equal $30.30/ or $30.86 as it should, and I want to not go thru so much to take care of it. To just hope Apple would have a call back option for this type of issue. I won't be buying iTunes gift cards or purchasing thru iTunes if my balance disappears when I do so.

When you tried to contact Support with the card's images how were you trying to do it, on your phone or a browser on your computer ? And have you tried a different browser to see if you get the same error message ?
As well as images of the card they might also want an image of its receipt.
And to contact Support you were using : http://www.apple.com/support/itunes/contact/ , and clicked on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes ?

Which publishing service to use for Newstand & managing back issue archive?

I'm just in the process of creating a Newsstand publication and I'm looking at the various options from YuDu,Adobe, Kindmags etc. The question I have is, if I'm using one provider to publish but decide to move to another, how to I manage my back issue archive? Is the publisher's archive managed independantly of the uyploading service.
For example, I may be using YuDu to publish, but subsequently move to Adobe's Digital Publisher Suite. What will happed to any back issues I've created? It's an issue that makes choosing the correct partner at the outset very important.
Any advice on this would be very welcome.
Neill W

We are only users in these forums. Apple is not here and does not answer here.
You should be asking this question in the developer forums.

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

You haven't enabled VoLTE (Advanced calling) have you? Not that it makes a difference just curious.
Have you upgraded to Lollipop yet?
Could be hardware or SIM card issue, read through this thread:
I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

Updating materials issued for production thru movement type

hi
we are using repetitive manufacturing scenario, and we are using back flush, how to find out the materials issued for production thru movement types, from which tables can i get the data
from AUFK i am getting the movement types and the order number, and i am unable to find out material numbers.
the requirement is need to update the costs of the materials based on the movement types for the production

Hi
I dont know if this question falls under the category of "Asking basic questions"
You can use MB51 to get the desired info.. It will give you the Material Consumed + mvt type (261) and Order where the Material is consumed
br, Ajay M

MPV: hwdec=vaapi fails and falls back to software decoding

I've always been confused by setting up hardware decoding - but a couple of recent threads reminded me of this nagging issue and I took another shot at it. Yet despite all the claims that mpv should support vaapi, it is simply not working here. I've followed the instructions here yet mpv falls back to software decoding every time. I've been searching for related issues, but I can't seem to find any reports from intel graphics users.
The output from mpv:
$ mpv --vo=opengl --hwdec=vaapi video.mpg
Playing: video.mpg
[stream] Video (+) --vid=1 (mpeg1video)
[vo/opengl/x11] X11 error: GLXBadFBConfig
[vo/opengl] Could not create GL3 context. Retrying with legacy context.
Using software decoding.
VO: [opengl] 720x480 => 853x480 yuv420p
V: 00:00:00 / 00:00:32 (2%) Dropped: 1
Exiting... (Quit)
Mpv's man page suggests that vo=vaapi should only be used for old hardware, though it doesn't specify how old. I gave that a try too. That avoids the GLX error, yet still falls back to software decoding:
$ mpv --vo=vaapi --hwdec=vaapi video.mpg
Playing: video.mpg
[stream] Video (+) --vid=1 (mpeg1video)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_37
libva info: va_openDriver() returns 0
Using software decoding.
VO: [vaapi] 720x480 => 853x480 yuv420p
V: 00:00:00 / 00:00:32 (1%)
Exiting... (Quit)
My hardware:
$ lspci -vnn | grep -i vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
I have all the drivers/packages listed on the intel graphics wiki page.
I must be missing something obvious here - the guides seem to suggest this should 'just work' yet mpv keeps falling back to software decoding.

I was hoping you'd chime in on this one Gusar. Thanks to both of your for the suggestions. So far no joy, though. I installed libva-intel-driver-g45-h264 and tried again and received identical output as in my initial post. I also tried xf86-video-intel-git which also gave no change.
To be clear, the video plays just fine, but it just relies on software decoding.
The output from vainfo from after the updates:
$ vainfo
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_37
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.37 (libva 1.5.0)
vainfo: Driver version: Intel i965 driver for Intel(R) GM45 Express Chipset - 1.5.0
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264Main : VAEntrypointVLD
VAProfileH264High : VAEntrypointVLD
edit: for reference/comparison I removed the new packages and got the "pre" vainfo (then reinstalled the aur packages again):
$ vainfo
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
As I'm pretty ignorant about video drivers, I'm curious if there are some video files that just would not be able to be hardware-decoded? I've tried a small number of different videos and am getting the same results with all of them, but if there are video-file constraints, are there any sample/testing videos around I should use for debugging?
Last edited by Trilby (2015-01-26 20:59:33)

TS3540 iTunes 11.0.4 (62) Fails to recognize iOS devices - Fall back to previous iTunes

Sometimes Apple releases an application that has a serious flaw in it like the new iTunes 11.0.4 (62) which is not recognizing iOS devices. There are over 56,000 users who have reported this in many threads on the Apple discussion support forum.
There needs to be an easy way in the MacOS (and iOS) to fall back to the previous revision of the software. Otherwise we can't trust the automatic updater which means we can use auto-update which means when new software comes out we'll wait for months to see if problems are reported before daring to upgrade which divides the Apple ecosystem and increases support loads on Apple which costs Apple's investor's money. All bad things.
I should be able to simply REVERT to the previous version of iTunes which worked perfectly fine.

This seems to have fixed the issue: on your desktop, hold down the [OPT] key and click on "Go" in the menu bar; holding down the [OPT] click on Library, find Preferences, and then delete all the files that start with "com.apple.itunes.XXXX.plist" where the "XXX" is whatever other things may exist - as long as they end in "plist". From my experience, preference files are rebuilt by the system after the next restart, so you have very little worry of losing any important data; the worst that could happen )and NOT in this instance, but for other plist files) is that you may have to reset the application "preferences" again when you next start it up, to act or appear in a "preferred" customized way for you.
Once you delete the .plist files, empty the Trash, and either log out or restart the computer. Once you're back up and operational, start iTunes and your iDevices should reappear in the sidebar (if that's open) and/or at the top of the screen (if that view is enabled).
Hope that helps. It definitely fixed my problem!

Item Conversion Template Issue for Oracle Migration - Copy functionality

Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PM

Issue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi

HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

To restrict Issue for production than planned qty in production order

Hi Experts,
In my scenario, the production staff will prepare production order and right click in production order document and select "Issue Components" option to Issue raw materials for production floor. After issuing the raw materials to production floor closes the "Issue for Production" document and now we have "Production Order" document open in screen. When he again select "Issue Components" option and issues the raw materials once again. Materials are issued once again wrongly. This happens since the production order document is not getting refresh after "Issue for Production" document is done.
Is there any way to restrict issue of raw materials than the planned qty.?
I have tried lot of ways to restrict this through SP. Please revert me an solution to this issue.
The procedure should trigger immediately when the "Issue Components" option is selected second time (If the raw materials are issued in full in first time itself). And it should allow only the qty which is to issued to production order qty (if they issue part issue to production order)
Thanks in advance
Raja.S

Hi Neetu,
Thanks for your quick response. I have tried this query. But it is not blocking the issue for production document even the raw materials are issued already for the production order.
I'll explain my work flow again. The Production staff will prepare production order and then release the same and update the production order after changing the status for "Release". Then he will right click the Mouse button and select "Issue Components" option and perform the Issue for Production process. He will issue the required raw material completely in one shot and add the Issue for Production document.
After adding the Issue for Production document he will close that document and now we will be in Production order document. Now our production order document will not get refreshed. Now the Production staff go for "Issue components" option, then it should not allow him to issue the components once again. But it is allowing him to issue components any number of times. there is no control.
If we browse the production order document to previous record and browse back to the same record then my Production order document get refreshed and now we can control the issue. But what should i do to control in the earlier case. Since they want to perfrom lot of production order, there is a chance to issue components for same production order more than one time before the production order document get refreshed.
Please provide me the SP to control this scenario.
Thanks in advance.
Raja.S

Automatically log back in for a given period of time

I just started to work on web and have the following issue:
We want some (mobile) users to be able to automatically log back in for a given period of time. It is not difficult to set cookie (valid user information without clear text) on the mobile device. For now the question is how we can log in using this cookie info.
Web application uses "j_security_check", "j_security_check" checks the user/password.
Question is how we can autologin using cookie information. Thanks guys!

it is not problem to check cookie on exists and valid. Problem is 'where' where can I do it using 'j_security_check'

AP Fall back issue for WLC

Similar Messages

Maybe you are looking for