AP goes off channel while identifying rogue ap threats

I'm having a problem where client connections get dropped, when the AP identifies a rougue ap threat. In some cases, the client is dropped ever 5 minutes for up to 30 minutes. My clients are connected over a RADIUS setup authenticating with an IAS service.
Found this on Cisco Support site:
Cisco lightweight access points are known to go off channel for up to 30 seconds (typically 1 to 2 seconds) while identifying rogue access point threats, when the Cisco lightweight access point has RLDP enabled. This can cause client connections to be dropped occasionally (CSCar10047).
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/r1x4x31.html
Should RLDP be disabled enabled? Is there any work-around for this?
My WLAN Environment:
- Controller - WLC2106; software version 6.0.182.0
- (3) 1242ag Access Points
- (1) 1131ag Access Points
Thanks in advance.

As a troubleshooting step, I have disabled RLDP on all Wireless Networks.
(Cisco Controller) config> rogue detection disable all
I'll monitor and report back after 4 business days.

Similar Messages

Retina display on Mac Pro goes off randomly while working

My client has the latest Mac Pro (cylinder) with two screens, one of which is the latest Apple Retina display.
In my client's own words, here's the problem:
"My monitors have been really buggy. The retina display just cuts out - then randomly comes back on.
I have verified that all cords and plugs are secure and that the power source is on... it's been doing this since the beginning but is worse now.
Sometimes one stays on and the other goes off -- sometimes it switches. When I reboot the same thing happens.
I ran disk utility permissions and repair just in case and all seems to be in order."
Mac Pro (64G RAM)
I searched online but haven't found any info on this problem
Any ideas?

Howdy generatech,
To help resolve or troubleshoot the issue with these monitors intermitently turning off on their own, I would use this part of the following article:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
Reset the system
You can reset the Mac's parameter RAM and SMC.
Thank you for using Apple Support Communities.
All the very best,
Sterling

My ipad3 keeps going off

i need help with my Ipad3, it keeps going off suddenly while am operating it and when i try to switch back on it takes time and also comes back on as if a full power shut down was done
also there are times when switching it on is an issue as i will to press the home button and on/off sleep/wake button simountaneously to bring it back to life

My ipad just started doing same, mine goes bk to lock screen, when I move it! Grrrrr, have u found anything out yet?

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
Myself an engineer for projects
Looks the company apple cannot grow if they do not support solving the problems of their existing customers
Ashok Dhingra
India

You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
What troubleshooting steps have you tried.

Flash Player - sound going off after a while

I have exported a flash clip as an exe flash presentation file. I am using Windows 7 with flash player 10.
The flash clip contains 4 seperate video files (movie trailers) which have been imported into flash. I am able to play these fine by running the exe file created in Flash (CS4).
After a while (10 min or much longer somethimes) the audi goes off but the flash movie still plays without the audio.
Any ideas what could be wrong?
I have also improved the quality of the video files that I am using within the flash movie (downloaded them as HD video files and converted them to f4v files in Adobe Media Encoder and imported them into flash to play with flv component. Unfortunately when I try to play the published exe file, when it comes to play the imported video elements the audio plays fine but the images of the movie are jittery. Am i doing something wrong?
Thanks in advance

Hi, not sure if you are in the correct forum. You may have more help in the Flash forum.
I don't understand CS4 and how Flash Player is related, so can't respond to that. Perhaps someone else will.
You could look on the right hand side for "more like this" when you open your thread since those threads are related to
issues similar.
Thanks,
eidnolb

Gets hot while taking video and screen goes off so many times

gets hot while taking video and screen goes off so many times

Sounds like something is obstructing the proximity sensor on your phone. It is usually at the top of the display next to the ear speaker. You didn't say what you have. Usual suspects are a screen protector or dust.

Ipad 2 upgraded to iOS 8.0.2 and the cellular signal doesn't work. Have to restart the unit to work with cellular signal. After a while it goes off and no service indication appears.

Ipad 2 upgraded to iOS 8.0.2 and the cellular signal doesn't work. Have to restart the unit to work with cellular signal. After a while it goes off and no service indication appears.

iPad 2, Since upgrading to iOS 8.0.2 the cellular signal indicates I do not have a SIM card. Monday spent hours on the phone with Apple support, backed up my iPad, reset all settings, reloaded my iPad and it still tells me I don't have a SIM card. Tuesday went to AT&T and got a new SIM card on the advice of apple support. It worked perfect until this morning and the NO SIM CARD notice reappeared. Never ever had any problem until the upgrade. I find it inexcusable that Apple refuses to address the issues they caused, iOS 8.0.2 is the Ebola of iPad 2 world. I dont have any cellular service after wasting two days trying to address and fix a problem Apple is responsible for. It's obvious Steve Jobs is no longer running the company. Furious & fustrated. How does Apple expect anyone who uses an iPad 2 for work, to remain a customer who will return to their products?

The sound goes off and on while typing on keyboard

The sound goes off and on while typing on keyboard

I would try to power cycle the device by holding the sleep/wake button till is says turn off. Maybe even reset by holding the sleep/wake and the home button at the same time. by chance if none of that works back up your device and restore it. Sounds like a software issue so that should fix it. You could always contact apple support aswell.

I phone 4 goes off to face time time mode while talking

While making / receiving calls, the phone goes off to face time /mute position many a times.

Hello,
I don't know if it's your case or not, but sometimes the battery is not calibrated, and it will show 99% for a long time before showing 100% (the longest I had to wait was one hour and a half). I'd recommend you to wait in 99% until it gets to 100% by itself (without resetting the phone). If it doesn't get to 100%, you should make a restore with iTunes. And if it still isn't getting to 100%, you'll have to contact Apple regarding this battery issue.

While watching a live program my voice keeps going off and on

while watching a live program, like the news, the sound keeps going off and on sometimes takes a long time to come back on?
I have checked my connections and they are secure so I would appreciate a little help with this, I am not a very smart computer person so have patience please.

Make sure the manual of the monitor says it supports the frequencies you are choosing.
Make sure the amp in use by all devices plugged in does not exceed the amps your circuitbreaker/fuse supports in that portion of the house.

Phone goes off while Synchronise

I need Help
Recently I have updated my phone software via Nokia Software.
i have two issues
one is the mobile goes off with you Sync. with outlook then on agin without completing the task.
also when trying to send txt MSG selected To: Open Log.
also phone goes off then on
any idea for the issue
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: العربية
Locale: English
Input language: English
Nokia PC Suite:
Version 6.83.14.1
Language: English
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Microsoft Outlook:
Version 12.0
Build 1014
No supported Bluetooth stack foundMessage Edited by rabia_saifan on 09-Aug-200707:24 PM

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/hi/m-p/2645505#nobanner
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I shut my lid the backlight goes off like it is supposed to, but comes back on after a while. It never used to do this, how can I fix it?

This problem is a recent one (only has happened in the past 2-3 weeks). When I shut the lid it used to immediately sleep (the power light began to do its fade in and out, and the backlight turned off), but now when I close the lid, the power light stays on, the backlight goes off for a few seconds before coming on again (not sleeping properly?). Then the backlight will turn itself off again and the computer sleeps like it is supposed to. Is something wrong here and how can I fix it?
Thanks

I think its the same in 10.5 as in 10.6 (the example below). Do System Preferences > Keyboard. Looks like this:
UNCHECK the box that reads, "Use all F1, F2, etc, keys as standard function keys," or hold the Fn key to use F11 and F12 for volume control. It looks like you have to own an Apple aluminum keyboard to get a function key on a desktop computer.

Earlier comments added goes off while saving PDF with new comments

When I add comments to a PDF file which already has some comments, the earlier comments goes off and only the changes I add gets saved in the PDF file. At the same time in some other system the new comments are added correctly to the file (that is, the earlier comments doesn't go off)

"I should perhaps add that I'm working here with .doc files (not .pages files) and that I edited the info.plist of Pages to give it the role of 'editor' instead of 'viewer' for all ".doc" files. Mainly to ensure that if I work on a .doc file which I want to remain a .doc file, I don't have to Save As (.doc copy) all the time but can just save in the normal way. Could this interfere with the above problem?"
Here is your problem. Every time you open a .doc to Pages it is a new document. When you work on in Pages it is a Pages file and not a .doc file. If you want to work in PAges save the file as the generic .pages and do the export for .doc. Keep that name and next time you Save as Word or export as word in the same location the .doc file will be overwritten with the new one. and you'll only have on .doc file and one .pages file.
If you want only have .doc files don't use Pages.

My imac mail keeps going off line and can't send out emails even when it when it comes back on line for a short while

Need help in getting rid of this annoying pop up problem. All my Inbox keeps going off line. Comes back very intermitently.

That can't be it if it is working intermitently.
Actually, more often than not, this is caused by duplicate entries in either Mail's Outgoing SMTP servers, or in Keychain.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it/them, or delete it/them and start over.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

While using facetime the internet goes off !

Hi, I have upgraded my laptop to mountain lion nad im having an issue with facetime. Im trying to call my mom which is using an iPad 2 through facetime but it keeps going off after 2 or 3 minutes and my wifi will disconect and after 5-10 seconds it will connect again but if I try to call back it will go off again ! any solutions ?

Tap the mute symbol left of the end call button.
If it's not working properly, try restarting or resetting your iPad. Here's how: Turning on/off and resetting, http://support.apple.com/kb/ht4130

AP goes off channel while identifying rogue ap threats

Similar Messages

Maybe you are looking for