AP log got Connection lost to WLCCP server, changing to Stand-Alone Mod

Our customer has about 200 Autonomous APs(Version=c1200-k9w7-tar.123-2.JA2),WLSM(Maintenance img(1.1(2)),Application img=12.2(15)XR2), Sup720 IOS=s72033-jk9o3sv-mz.122-18.SXD3.bin.The static WDS point to WLSM,somme of AP will fail with log"Connection lost to WLCCP server, changing to Stand-Alone Mode".
Any ideas about solutions on this?

You will receive this error message if the AP loses its connectivity with the WDS. This can happen if the radios are flapping, as well as if there are problems with authentication / registration with WDS. If the AP is powered using POE, please ensure that you configure the proper poe support on them. Also check if authentication is happening correctly. Debugs on the AP and the logs on the AAA server will help troubleshoot this issue.

Similar Messages

Reports server: cannot start stand-alone servers

I have 9iAS 9.0.2.0.1 on RedHat Linux AS. When I try to create/start a new reports server (using rwserver.sh), I get "REP-50001: Server is initializing", but it never starts. My in-process server works, but I can't create any additional servers.
I've made the changes suggested in MetaLink Doc ID 214310.1. But, I still cannot start a stand-alone server.
Any help is greatly appreciated.

The problem was with vncserver. Once I started it with
"vncserver :15 -nolisten local -httpd ${VNC}/classes -cc 3", it started up.

Running the G server and labview web server as a stand-alone serve

Hello,
Now I am running the G web server from the Internet toolkit cooprating with the Labview default web server because I need the server to handle both GCI reguests and the requests of the remote panel.
Now I have a question. Is there any way to make these two servers as stand-alone applications and also make it to be window service ( I think if I could make them the stand-alone applications, making them to be window services would be easy)? I just want the web server to be a stand-alone application without installing the Labview (just installing the run-time engine) on one machine. Could this be done? Thank you very much.
Best Regards,
Benjamin Chu

Hello Benjamin,
for running a LabVIEW application as Windows Service is here a tutorial.
I formerly tried to get the G web Server into an application and I know there were some dynamic VIs loaded by the HTTP Server Control.vi and some SubVIs. I never tried this seriously enough to get it running.
You need at least to put the VIs vi.lib\addons\internet\http\http0.llb\HTTP Server, vi.lib\addons\internet\http\http0.llb\srvr_%02d.vi (%02d is part of a format into string with a for loop index), HTTP Load Configuration Files.vi as dynamic VIs into your build definition.
Running the G Web Server and looking at the VI hierarchy is not for help because for some reasons the G Web Server VIs will not show up in the VI hierarchy window.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

JCo server as a stand alone service

Hi All,
I have a JCo server that is connecting to the R/3 system - working fine - no problems with that. I am currently running it at the cmd prompt. The problem is if somebody logs out of the server, the JCO server is shutdown. Instead, I want to run this as a service in the J2EE Engine so that it is up and running all the time with the J2EE server. How can I do this (apart from making it a servlet). Any other ideas on this ??
Thanks,
MV.

Hello,
if you are on J2EE 1.4+ you could use a resource adapter
regards franz

Replace directory server by another stand alone instance on a diffrenet box

I have JES4 componenets all installed on a sinlge box. I'd like to replace the existing directory server(5.2 sp4) with another directory server instance on a different box. After replacing, I would need to bringdown the existing directory server. What steps do I need to follow for this? Are there any tools to support this kind of replacement strategy? Any poniters in this regard are highly appreciated.
Thanks in Advance,
Lakshmi

I have some questions! I think, there are some attributes for the LDAP instance name and port in some of the services such as:
iPlanetAMAuthCertService
iPlanetAMAuthLDAPService
iPlanetAMAuthMembershipService
iPlanetAMPolicyConfigService...etc.
Also these attributes (LDAPinstance name and port) are present in AMConfig.properties,PSConfig.properties and server.xml.
Since I need to bringdown the existing LDAP server, do I need to manually update each of these attributes in the newly created LDAP isnatnce and the above mentioned files?
Are there any other properties files or xmls that I need to modify for this?
Thanks,
--lakshmi

SMD agent not connecting to the SMD server!!!!

Hi
We are tring to set up the Solution manager diagnostics. We are on SP13 NW04s.
We finished installing the Wily 7.2, Diagnostics System Wizard,
and then finished installing the SMD agent on the remote server without any error.
Our Diagnostic system server(solution manager) in on i5/OS and the our SMD agents are spread across windows servers & i5/OS servers.
The SMD agents from the i5/OS server got connected to the Diagnostic server(solution manager) within minutes.
But the ones from windows(X64) do not get connected to the Diagnostic server(solution manager) . We waited and waited, tried rebooting the agent, but to no help. The status it shows is "in process"
When we checked the logs in the SMD agent system on windows, we found out that it is complaining about some application which failed to unzip as shown:
Mar 18, 2008 8:04:47 PM [Thread[SMDAgent connection thread,5,main]] Info       [SMDConnector.reset] in progress ...
Mar 18, 2008 8:04:47 PM [Thread[SMDAgent connection thread,5,main]] Info       Stopping Applications ...
Mar 18, 2008 8:04:47 PM [Thread[SMDAgent connection thread,5,main]] Info       [SMDConnector.reset] Done.
Mar 18, 2008 8:04:52 PM [Thread[SMDAgent connection thread,5,main]] Info       [sapms://<SMD_SERVER_NAME>:8145] Waiting for connection ...
Mar 18, 2008 8:04:52 PM [Thread[SMDAgent connection thread,5,main]] Info       [sapms://<SMD_SERVER_NAME>:8145] Checking server availability...
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       [sapms://<SMD_SERVER_NAME>:8145] Authentication in progress ...
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       [sapms://<SMD_SERVER_NAME>:8145] Connection established .
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       [sapms://<SMD_SERVER_NAME>:8145] Registering agent on server ...
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       Reading JStartup environment...
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       'SAPLOCALHOST' found, The value 'srvlctemp01' will be used to determine the Agent name.
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       InetAddress Resolving for 'srvlctemp01' - FQN: srvlctemp01 SQN: srvlctemp01 IP: 10.10.16.89
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       InetAddress Resolving for localhost - FQN: srvlctemp01 SQN: srvlctemp01 IP: 10.10.16.89
Mar 18, 2008 8:04:53 PM [Thread[SMDAgent connection thread,5,main]] Info       Agent handle : srvlctemp01_SMD_J66/srvlctemp01 created.
Mar 18, 2008 8:04:53 PM [Thread[Thread-620,5,main]] Info       Overriding runtime property from server configuration, name= 'runtime.states.initial', value='core.startup,core.patch.enabled'.
Mar 18, 2008 8:04:56 PM [Thread[Thread-616,5,main]] Info       [AgentContext.offlineDeployApplicationConfiguration] ENTERING
Mar 18, 2008 8:04:56 PM [Thread[Thread-616,5,main]] Error      Deploy application configuration failed.
[EXCEPTION]
com.sap.smd.agent.deploy.DeploymentException: Cannot expand zip entry.
     at com.sap.smd.agent.deploy.DeploymentManager.extractCompressedStream(DeploymentManager.java:258)
     at com.sap.smd.agent.deploy.DeploymentManager.installAppConfiguration(DeploymentManager.java:780)
     at com.sap.smd.agent.AgentContext.offlineDeployApplicationConfiguration(AgentContext.java:597)
     at com.sap.smd.agent.AgentContextp4_Skel.dispatch(AgentContextp4_Skel.java:189)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
     at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:710)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.util.zip.ZipException: invalid entry CRC (expected 0x0 but got 0x1b3304ba)
     at java.util.zip.ZipInputStream.read(ZipInputStream.java:164)
     at com.sap.smd.agent.deploy.DeploymentManager.extractZipEntry(DeploymentManager.java:321)
     at com.sap.smd.agent.deploy.DeploymentManager.extractCompressedStream(DeploymentManager.java:251)
Has anyone experieced any kind of errors related to this?
Thanks

Hi Folks,
Can u give me the steps and best practices to be follow to configure & Install the WILY Interoscope with solution manager.
Please share your experience also with WILY Interoscope.
Documents would be highly appreciated with reward points.
Regards,
Akshay

Connecting to the Mobile Server Repository

Having finally installed Oracle Lite for 9i succesfully and adding the mobile repository to my current database with no issues.
I've been following the configuration guide in the documentation and I am attempting a stand alone mode. However... when I get to the point of trying to connect to http://<Mobile_Server_name>:<port_number>/webtogo/startup the browser appears to be connecting and then just stops displaying nothing (or the previous webpage content); no error page or anything.
Would the mobile_server_name be localhost?
Thanks in advance

I installed the oracle 9i lite and mobile server in standalone mode( by using step by step oracle documents...) but couldn't connect to it and so the setup for mobile client for pocket pc not working.pls HELP me how can I connect ....
Thanks

Cluster Database Connect Works Only in stand-alone OEM

When I connect to OEM standalone, I can connect to the cluster database with no problem. When I try to connect with the management server, it gives me the ORA-12514 error. The service name works both in SQLplus and in stand-alone mode.
My console is running on a windows XP machine, the management server and OEM catalog are on a machine running 9.2, the cluster resides on two other machines running 9.2.
What do I need to change to get OEM to let me open the cluster database using the management server?

Try to create a service like this one and try:
joel.us.acme.com=
(description=
(load_balance=on)
(failover=on)
(address=(protocol=tcp)(host=host1)(port=1521))
(address=(protocol=tcp)(host=host2)(port=1521))
(address=(protocol=tcp)(host=host3)(port=1521))
(connect_data=
(service_name=joel.us.acme.com)))
for more information about it you can check these
documents:
Real Application Clusters Administration Contents / Search / Index / PDF
Real Application Clusters Concepts Contents / Search / Index / PDF
Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
Real Application Clusters Documentation Online Roadmap Contents / Search / /
Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez

Configuring App Server 8.2 (bundled or stand-alone)

Hi all.
Would anyone know how to configure the App Server 8.2 (stand-alone or bundled) to accept connections over the internet?
i currently have a web application deployed on the bundled App Server 8.2. I can launch the application on any PC on the same network as the server PC.
I am not able to run the application using the server's external IP address.
What to do?

There were actually three questions;-)
So I assume you have a firewall on your box and it will allow the appserver to handle requests from anywhere.
Your external firewall is configured to allow requests from the internet to the appserver http port?
And you have a internet IP address which is (somewhat) static and routable?
Thanks,
-- Marco

SQL Ports For SCCM 2012 (Stand alone Server)

Is there any reason to open port 1433 and 4022 if the SCCM server is a stand alone? It keeps displaying the error in the monitoring tab if i don't open the ports. The SQL and SCCM are on the same server.

I have seen this error even when the ports are open.
If you get that problem then there isn't a workaround and you have to put up with the error. There is a open call with at Microsoft Connect about this but I don't think there is any progress on it.
https://connect.microsoft.com/ConfigurationManagervnext/feedback/details/1045929/hierarchy-monitoring-detected-that-the-configmgr-sql-server-fqdn-ports-1433-4022-are-not-active-on-firewall-exception
P.S. You need a connect account and be a member of the Configmgr program to be able to view this.
Cheers
Paul | sccmentor.wordpress.com

Report Server and ORA-03135 - Connection Lost

Hello,
We are running Oracle 10gR2 (AppServer, Report Server and Database) and we notice that in the error log of the database, we getting many error ora-03135-Connection Lost. After investigating a bit on this, i think i found the cause of those error. Error seem to be generated by the report server everytime it automatically shutdown an engine because engine was not use in the last 30 min. Is there a way to prevent the report server to cause this error in the DB log file ?? maybe it is only a setting to change.
And we don`t want to extend the timeout of the engine to prevent it to shutdown automatically because this will cause memory issue on the server if engine always stay up
Thank
Martin

Use death connection detection in the sqlnet.ora file. Usually setting SQLNET.EXPIRE_TIME is used to catch firewall timeouts, but in your case you could use it to detect that the report engine was stopped. Set SQLNET.EXPIRE_TIME to a slighty higher value than 30 minutes, say 35 minutes. Then each 35 minutes a probe packet is send to test if the connection is still alive. If not then the RDBMS ends the connection.
cheers

I got a message that I should download an upgrade to Firefox 3.6.16. So I hit the download button and it said "Downloading the update" and "Connecting to the udate server". And it gets stuck there. How can I get past it?

I have an iMac OS 10.4. I downloaded Firefox a while ago and I had no real problems with it. Then I got this message that I should update Firefox to 3.6.16. So I hit the "Download" button and I get the "Software Update" which says "Downloading the update" with a progress bar and below it , it says "Connecting to the download server". But it gets stuck there. The progress bar has gone to the end of bar. How can I get hooked up to the Update server?

That is because that Firefox 3.6.x version has been released later than the Firefox 4 version.
If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Connection Error in Presentation Server log file - Socket:524

Hi All,
Earlier I had issues with starting presentation server , so i installed OBIEE again.
I started all the services and Started oc4j.
And i'm able to open the Administrator tool. But get error in IE while opening presentation server.
When i opened the saw0log file from this location "C:\OracleBIData\web\log" ,this is the error i see
Type: Error
Severity: 42
Time: Thu Apr 08 11:08:06 2010
File: project/webcomm/socket.cpp Line: 892
Properties: ThreadID-1736
Location:
     saw.rpc.client.impl.verify
     saw.rpc.client.impl.initFixedRPC
     saw.rpc.client.endpoint.noncluster.initFixedLenRPC
     saw.rpc.ping.send
     saw.threads
An error occurred during execution of "connect". No connection could be made because the target machine actively refused it.
[Socket:524]
Type: Error
Severity: 42
Time: Thu Apr 08 11:10:08 2010
File: project/webcomm/socket.cpp Line: 892
Properties: ThreadID-1736
Location:
     saw.rpc.client.impl.verify
     saw.rpc.client.impl.initFixedRPC
     saw.rpc.client.endpoint.noncluster.initFixedLenRPC
     saw.rpc.ping.send
     saw.threads
An error occurred during execution of "connect". No connection could be made because the target machine actively refused it.
[Socket:524]
Type: Error
Severity: 42
Time: Thu Apr 08 11:12:10 2010
File: project/webcomm/socket.cpp Line: 892
Properties: ThreadID-1736
Location:
     saw.rpc.client.impl.verify
     saw.rpc.client.impl.initFixedRPC
     saw.rpc.client.endpoint.noncluster.initFixedLenRPC
     saw.rpc.ping.send
     saw.threads
An error occurred during execution of "connect". No connection could be made because the target machine actively refused it.
[Socket:524]
Please help me where to change the connection details.
Thanks
Mehaboob

Step : 1: Check your NQSCONFIG.ini file and in Repository section should be like
[ REPOSITORY ]
Star = bise1.rpd, DEFAULT;
or
[ REPOSITORY ]
bise1 = bise1.rpd, DEFAULT;
Step : 2 : Open ODBC Data source Administration ->System DSN and then Select AnalyticsWeb - Oracle BI Server
In Oracle BI Server LoginId and Password window you should check and enable the Change the default repository to
Here the name should be Star or bise1 ( Refer step:1:)
Click next and enable Change the default catalog to and select the Database (highlighted gray to blue color)
Leave others are default.
Note : whatever repository will be put under change Default repository section will be override by the DEFAULT settings in NQSCONFIG.ini .You can tick “Connect to Oracle BI Server to obtain default settings for the additional configuring”, so that RPD connection will be established as per the definition in .ini file after BI server restart.
Plz award points, if it helpful,
Thanks,
Balaa...

ONS.log , invalid connect server IP format

Dear all,
We have a RAC system 10g (10.2.0.3) with two database nodes on two dedicated IBM Power servers with AIX 5.3 as OS.
The following message is occurring in a frequent way in ons.log noting that we have detected that the ons process is consuming very high memory:
+13/03/18 09:34:33 [2] Passive connection 0,<IP of server 1>,6200 invalid connect server IP format+
+3232237319,6200,6113,0+
ONSinfo: !!3232237319!0!6200!0!6113
hostName: <hostname of server2>
clusterId: databaseClusterId
clusterName: databaseClusterName
instanceId: databaseInstanceId
instanceName: databaseInstanceName
Unfortunately we can't find any documentation for that.
Regards.

ons process is consuming very high memory....
is it log size is increasing drastically or any other issue....we are not getting issue .....
ONS is consuming high CPU? is it ur issue...then
according to my understanding the hostname or IP value configured for OPMN in the opmn.xml file does not match the corresponding entry in the ons.conf file.
OPMN reconnects to itself over and over, thereby increasing CPU usage, one more thing is ONS topology is mis-configured....i hope...
ons.conf file content must be same as all other instance in the cluster.....
for more information examine the log ORACLE_HOME/opmn/logs/ipm.log ....if possible post the log.....
thanks,
DBC,
Sr DBA.

TS3367 I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??

I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

AP log got Connection lost to WLCCP server, changing to Stand-Alone Mod

Similar Messages

Maybe you are looking for