Ap-manager ip address is not reachable
Hi,
we have Cisco 4402 Wireless LAN standalone controller, we recently upgraded the firmware from 4.0.155.0 to 4.0.179.11.
with new image we are unable to ping manager ip address but unable to ping ap-manager ip address. however both manager an d ap-manager interfaces are in same subnet.
Please help me any one face this type of problem.
Thanking you,
Regards,
Ranga Kishore
9959344436
That is normal behavior.
Similar Messages
-
For server the Node Manager associated with machine is not reachable
Hello all,
I am getting this error, when i start my Managed Server which is in shutdown state
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The configuration details are
i am using weblogic 9.2 MP3 version in windows 2k3 server.
It has a machine vm-bea-dev, a cluster cluster-saa-dev, to which both the managed servers saa-dev-1 and saa-dev-2 are assigned. There are 3 applications deployed onto managed Server 1 and 1 for managed Server 2.
Managed Server 1 is in shutdown state, and when i start the server, it gives the error specified below
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The same for Managed Server 2 too, and this server is in Admin State, i dont know how it went into that state.
Can somebody please help me reslove it.
Thanks in advanceActually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers -
Hi Everyone,
I'm very new to WebLogic, so I apologize if this is a dumb question.
I'm trying to install WebLogic as server for OBIEE. My environment is pretty simple. I have two Oracle Red Hat Linux 32-bit physical machines, let's call them WLS_SERVER and OBIEE_SERVER. I installed OBIEE on the OBIEE_SERVER and tested it using the out of the box OC4J container and that worked fine.
Then I installed WebLogic 11g on the WLS_SERVER machine and I ran the config.sh script. I used the configuration GUI to register the two physical machines and an additional server object called BIServer. Out of the box, web logic comes with AdminServer server object. I heard it's a bad practice to deploy applications to the AdminServer, hence why I created the BIServer object. I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."
How do I setup a Node Manager on the OBIEE_SERVER? Do I also need to physical put the WebLogic install file on the OBIEE_SERVER box and also run the installer there? Or there a copy paste thing I do? What am I missing here?
I appreciate the help!
-JoeI'm trying to install WebLogic as server for OBIEEI have not heard about OBIEE, but if your aim is to use weblogic as a server for hosting this then you definitely need to install weblogic on the physical box where OBIEE will be hosted.
I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."Again not sure what is BIServer but I think you are missing a number of steps here. If you are trying to run BIServer
on weblogic you definitely need to install WLS on this physical machine [OBIEE_SERVER]. You will then need to configure a node manager on OBIEE_SERVER machine to enable it to start remotely from the admin machine.
Link for Node Manager. Since you are in Linux you can try setting up script based node manager.
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/server_start/nodemgr.html#wp1099239 -
Uc560 - CUE Webinterface not reachable
Hello,
i have a problem with my UC560. Especially with the CUE Webinterface. After config my UC560 everthings working fine.
But the webinterface of the CUE is not reachable. I can ping the integtr. Service. Engine with IP 10.1.10.1. from my network.
A service-module integr.S.E. status reports -> everything OK. A seesion on CLI also connects and works.
Is there any idea ? help !!!
here some configs :
interface Integrated-Service-Engine0/0
description Interface used to manage integrated application modulecue is initialized with default IMAP group
ip unnumbered Vlan90
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface GigabitEthernet0/1/3
description Interface used to communicate with integrated service module
switchport access vlan 90
no ip address
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface Vlan90
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Vlan90Hello,
I have a similar issue. I know that there are many threads like this but this is the newest I found
I've wiped the preloaded configuration and now using the uc560 like a standard ISR. I've made a lot of tests and changes, using G0/0 and an IP for connecting to the LAN, or g0/1/0 as trunk/access port connecting to the LAN. I've ended up with the configuration I'm attaching. There is no way to have connectivity with the CUE. I've tried with and without VLANs (the file attached is with VLANs). NAT is irrelevant in my case since there is not anything to translate it's all a private routed network. I still cannot ping the ISE inf from inside the uc560 localy or the gateway address from inside the CUE.
This G0/1/3 seems to need some special configuration to be done in order to work. Do you know what is it?
It's also not possible to make the CUE to factory default. No initial setup wizard starts... nothing. No wizard needed for the initial setup like all the other CUE products?
Here is the config:
! interface GigabitEthernet0/0 no ip address duplex auto speed auto h323-gateway voip interface!interface Integrated-Service-Engine0/0 description Loopback interface used to manage integrated application module ip unnumbered Vlan2 service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface GigabitEthernet0/1/0 switchport access vlan 2 no ip address!interface GigabitEthernet0/1/1 no ip address!interface GigabitEthernet0/1/2 no ip address!interface GigabitEthernet0/1/3 description Interface used to communicate with integrated service modue switchport access vlan 2 no ip address service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface BRI0/1/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 5!interface BRI0/1/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 6!interface BRI0/2/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup! interface BRI0/2/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup!interface Vlan1 no ip address!interface Vlan2 ip address 192.168.2.2 255.255.255.0!ip forward-protocol ndip http serverno ip http secure-serverip http path flash:/gui!ip route 0.0.0.0 0.0.0.0 192.168.2.1ip route 192.168.2.254 255.255.255.255 Integrated-Service-Engine0/0!!!telephony-service no auto-reg-ephone max-ephones 15 max-dn 15 ip source-address 192.168.2.2 port 2000 secondary 192.168.2.3 rehome 15 time-zone 28 time-format 24 max-conferences 4 gain -6 moh flash:/media/music-on-hold.au multicast moh 239.0.0.1 port 16384 route 192.168.2.2 web admin system name admin password cisco time-webedit transfer-system full-consult create cnf-files version-stamp 7960 Mar 06 2013 15:02:09!
Thanks in advance! -
Switch profile peers not reachable
Hello:
I have a couple of N5k 5.2(1)N1(1). I'm trying to create a switch profile for all vPC configuration. They are connected to a OOB network through their mgmt0 interface, and ping is succesful. However, the show switch-profile status command shows they can reach eachother.
CONFIG SWITCH 1
feature telnet
feature tacacs+
cfs ipv4 distribute
cfs eth distribute
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature vtp
feature fex
interface mgmt0
vrf member management
ip address 10.161.20.88/24
switch-profile XXX
sync-peers destination 10.161.20.87
SWITCH 1# sh cfs status
Distribution : Enabled
Distribution over IP : Enabled - mode IPv4
IPv4 multicast address : 239.255.70.83
IPv6 multicast address : ff15::efff:4653
Distribution over Ethernet : Enabled
SWITCH 1# sh switch-profile status
switch-profile : XXX
Profile-Revision: 1
Session-type: Initial-Exchange
Session-subtype: Init-Exchange-All
Peer-triggered: No
Profile-status: -
Local information:
Status: Verify Failure
Error(s): Peer not reachable over CFS
Peer information:
IP-address: 10.161.20.87
Sync-status: Not yet merged
Merge Flags: pending_merge:1 rcv_merge:0 pending_validate:0
Status: -
Error(s):
CONFIG SWICTH 2
feature telnet
feature tacacs+
cfs ipv4 distribute
cfs eth distribute
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature vtp
feature fex
interface mgmt0
vrf member management
ip address 10.161.20.87/24
switch-profile XXX
sync-peers destination 10.161.20.88
SWITCH 2# SH CFS STATUs
Distribution : Enabled
Distribution over IP : Enabled - mode IPv4
IPv4 multicast address : 239.255.70.83
IPv6 multicast address : ff15::efff:4653
Distribution over Ethernet : Enabled
SWITCH 2# SH SWItch-PROfile STATUs
switch-profile : XXX
Start-time: 371925 usecs after Thu Jan 17 06:37:58 2013
End-time: 107348 usecs after Thu Jan 17 06:39:58 2013
Profile-Revision: 1
Session-type: Initial-Exchange
Session-subtype: Init-Exchange-All
Peer-triggered: No
Profile-status: -
Local information:
Status: Verify Failure
Error(s): Peer not reachable over CFS
Peer information:
IP-address: 10.161.20.88
Sync-status: Not yet merged
Merge Flags: pending_merge:1 rcv_merge:0 pending_validate:0
Status: -
Error(s):
What can I be missing here?Hi Robert:
Sadly, not even the TAC could solve this. We ended up not using vPC, which is a pity.
Best regards, Faimy. -
IOS Remote Desktop App resolves hostname but throws Host is not reachable error.
Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
activeUsername = "DOMAIN\\UserName";
arcTimeout = 1800;
cacheId = BEBD1725D63BB841;
configurationVersion = 8;
console = 0;
host = "server.mysite.com";
label = "Server";
mouseMode = "-1";
port = 3389;
soundMode = 1;
swapMouseButtons = 0;
type = rdp;
utilityBar = "-1";
kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
CameronHi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support -
This email address is not available for use as an Apple ID
hi
i had two apple accounts
and just wanted to change the primary email address for the both with each other
when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
please help meYes, I am having the same problem. When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me. Uuuuuhh? So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management) that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again. Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available. Talk about ****** up. -
Email Address Is Not Available
I just changed my email address for my Apple ID to my work email. I tried to change it right back to my personal gmail address and I get this message "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
When I go to appleid.apple.com and I login with my work address, I do not see my gmail address listed. Naturally I logged out and clicked "Find Out" under "not sure if you have an Apple ID?" I put in my name and personal gmail address. It responds "
We can't find an Apple ID matching the information you provided. You may have entered a name that doesn't exactly match our records. Try again"
Which sounds like my gmail address is not tied to any accounts. THIS DOES NOT MAKE SENSE.
This is SO frustrating. What do I do?
I've racked my brain. Any ideas?Yes, I am having the same problem. When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me. Uuuuuhh? So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management) that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again. Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available. Talk about ****** up. -
Have tried to get Apple Tech Support and local Apple techs to deal with this problem to no avail. Apple store "genius" throws up hands and says nothing can be done. Root of the problem seems to be that the old non-email AppleID is stuck in their system creating a catch22 that it appears as the account purchasing Apps, then is not recognized as a valid ID, and then disallows any attempt to change it to a recognized email address.
Consequence is that Apps appropriately purchased can not be updated. Apple store advises us to delete them and repurchase, but this seems more Windowsian than Applian. Any Ideas??Hello J_DougBC,
Thank you for posting in the Apple Support Communities. I found an article that addresses Apple IDs that are different than the Primary Email Address on the account. You will need to go to https://appleid.apple.com/ to "Make your Apple ID and email address one and the same."
If your Apple ID and primary email address do not match, or they match but the email address is unverified, you can edit them.
1. Sign in to My Apple ID to manage your account information.
2. If you want to add and verify an email address that matches your Apple ID, follow the dialog box that says "Make your Apple ID and email address one and the same." This will automatically unverify that email address from any other Apple ID for which it was previously verified.
3. If you want to change your email address to one that does not match your Apple ID, click Edit next to your Primary Email Address. If this email address is already associated with another Apple ID, you will need to sign in with that Apple ID and delete it before you can add it to your preferred Apple ID.
Note: If you have an @me.com or @mac.com Apple ID and primary email address, you cannot edit your primary email address once it has been verified. To change your @me.com or @mac.com primary email address to another email address, contact Apple Support for assistance.
You can find the full article here:
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
I hope this helps get you back on track!
Best,
Sheila M. -
Officejet Pro X476dw MFP not reachable
Hi,
out of the blue my Officejet Pro X476dw MFP turned 'not reachable' from my MacBook. Device is still connected to my Wifi network, no changes there since last use. I can print ok from my iPhone. I turned the device off and on again - no success. I turned the MacBook off and on again - same. I reconfiguered Wifi connection at device - same. I deleted printer from MacBook and tried to re-add but installation program couldn't find device. I tried to connect manually using IP address that was shown on device - 'device not reachable'.
I am running out of ideas, appreciate any help!
Thank you!
Maik.@weirdharrell
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
Photosmart C4385 "Device Not Reachable"
I know this has been addressed in other threads, but none of the solutions have worked for me and my configuration is a little different. So here goes:
I'm running OS 10.6 Snow Leopard with my C4385. My computer is connected to a wireless network via an extender. I don't know anything about the router other than it's probably a Cisco since that's in the network name. The router and extender are both in my landlord's house, so I don't have access to them to reboot, check settings, or anything. Until this morning my printer was associated with the main network, which worked fine, but the signal is very weak and I would rather have it associated with the extender network. I went through the HP Setup Assistant and now all I get is the "Device Not Reachable" error message, whether I use the extender or main network.
I printed a Network Configuration Page and typed the printer's IP into my browser, and it shows up just fine, saying it's connected to the main network. Print & Fax under System Preferences disagrees and I can't print at all anymore (except with the USB cable). The only thing I changed recently is switching to a manual IP address for my laptop since I had lots of connectivity issues with automatic IPs, but after that everything worked until this morning when I ran Setup Assistant.
Sorry for writing a novel. I wish I had more information about the hardware but my landlord's not very helpful with these sorts of things. Any advice would be great! I've tried scrubbing software and reinstalling it and resetting the printing system, with no luck.I see a couple of potential problems, here.
First, adding the printer by IP is dicey. If the router changes the printer's IP (actually WHEN it does, because eventually it will), then your Mac may lose track of it. Plus, adding by IP usually only enables printing, not scanning.
Second, HP printers don't seem to play well with wifi extenders. Is there a way to move your printer so that it is connected to the main router, not the extender?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Hello,
we've configured a UC560 with Cisco Standards. So the CUE has the IP-adress 10.1.10.1 (Gateway .2).
The CUE successfully answer a ping ! The CCA CUE diagnostics ended successful.
I also can connect to CUE through CLI of the UC560.
BUT : The Webinterface of the CUE does not answer. The webiste ist not reachable.
Here the http config of the UC560 :
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/GUI
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services
http://10.1.10.1/voiceview/common/login.do
url authentication
http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
and the telephony part :
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
Can the problem be based on corrupt http CUE files or the wrong version ? Which files are required ?
May the Firewall ACLs block this traffic ? But ping works !
Please help !
Greets
HuckThat usually happens when your PC is using a default gatway that doesn't know about CUE address subnet.
So you have to fix your routing. -
my apple ID is showing someone elses email address and not mine so when i want to buy or update apps it brings this other email address up. please can someone help how do i put it back to my email address?
First go here - https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and login under the manage tab. Check your information and be sure it is all correct.
An AppleID is nothing more than an email address, so if you see another email address in the store, then someone has logged in with a different AppleID than yours. Did you let someone else use your iPhone? -
Ora 12543 tns destination host not reachable
Dear All,
OS: RHEL 5
DB VERSION:-11.2.0
I am facing problem related to ora 12543 tns destination host not reachable
The problem here is little bit different what exactly other face:-
i have 2 servers with name abc.localdomain & xyz.localdomain.
Db name on abc.localdomain is abc
Db name on xyz.localdomain is xyz
When i try to ping with below mentioned command abc and xyz from abc.localdomain i am successful
ping abc
ping xyz
But when the same thing i am trying to do from xyz.localdomain i am able to ping the db running on xyz.localdomain. but getting the above mentioned error duringg pinging of abc database located on abc.localdomain server
I am able to ping both the server's from their ip's and hostname but not by abc db name and also checked firewall on both servers are disabled.
Here are my tnsnames.ora and listener.ora files for both machines
xyz.localdomain tnsnames.ora file:-
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
xyz =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
(CONNECT_DATA =
(SERVICE_NAME = xyz)
abc =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = abc)
xyz.localdomain listener.ora:-
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = xyz)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME = xyz)
ADR_BASE_LISTENER1 = /u01/app/oracle
abc.localdomain machine:-
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = abc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/grid)
(SID_NAME = abc)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
tnsnames.ora:-
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
xyz =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xyz.localdomain)(PORT = 12001))
(CONNECT_DATA =
(SERVICE_NAME = xyz)
abc =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = abc)
So kindly advice over the same if anyone of you face the same problem.Hi,
Before actually looking up on this issue. I would suggest you to read the below posts to get true knowledge of what these utility do (i.e Listener, tnsping) and what are there purpose.
Help! I can't connect to my database...; | Ed Stevens, DBA
Help! I can't connect to my database (part duex) | Ed Stevens, DBA
tnsping what it is, what it isn't | Ed Stevens, DBA -
Status Agent Not Reachable - How to set a fix port number?
My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Maybe you are looking for
-
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I
-
Why does dying internal hard drive stop you booting from external hd
Why do I need an internal hard drive if I am booting from an external drive? Doesnt make sense, Disk Utility warned me that the internal hard drive is failing. I have managed to change start up disks. I have an external bootable drive and even have a
-
Cant use DVI-D port with DVI-D cable from Pav 500-100a to HP W2207 monitor
I have a new Pav 500-100a factory standard with no mods. A HP w2207 monitor. Currently connect fine with VGA to the DVI-D port with the adapter that came with the pc. I've setup Windows, updated to 8.1, put in my files from my old PC and all was we
-
Sometimes I use Firefox for browsing and when I do a search, the search engine will not take me to the site but I get a message that says "DNS Solution Error". I believe it is some kind of malware. I appreciate any help from anyone who knows how to
-
ITunes 7.5 - cannot purchase anything
Hi, I am having issues trying to make a purchase from the iTunes store for the last 48 hours. I can access my account ok online and review my personal info, but cannot make a purchase. i get a message that states that there is a problem with the iTun