AP-manager ip for mobility and anchor?

I'm setting up wlan solution for a client. It involves mobility group, anchor and without LAG. Anchors are placed in DMZ. Anchors management interfaces are blocked from sending any packet to corporate network wlc.
Is it possible to configure mobility group using AP-manager IP. If WLCs management interfaces are not connected & only used for management purpose(bloody corporate policy), is it possible to setup wlan using AP-manager ip addresses. Will it have any impact in wlan?
mobility group member add ----> can we specify ap-manager ip here?
mobility group anchor wlan add  ---> anchor ap-manager ip here?

Ramesh,
If you're talking about a 4400 based controller as your Anchor, then yes, you effectively have an AP-Manager interface taking an IP address.    I've never tried this with respect to an anchor, but it is feasible to have your AP-MGR in a different vlan than your Management interface.  In theory, if you absolutely had no IP address to spare, maybe you could black hole the AP-MGR in a fictitious vlan?    I personally wouldn't do it though, as I'm not sure what the behavior would be if your AP-MGR was never able to talk to its gateway...
If you're talking about the 5500 based controller (and any future controller that supports being an anchor), you should not have to have an AP-MGR. In fact, the only time you'd have an AP-MGR interface is if you were doing what I said above regarding an AP-MGR in a different vlan.
Make sense?
-Wesley Terry

Similar Messages

  • How do I configure my application to provide access for mobile and web brow

    Hi everyone.
    I have one application and I need to provide access for mobiles and desktop browsers, and I don't know how do I configure my application to do this.
    Let me explain:
    In my jDeveloper I have One application and 3 projects:
    -Mobile (here is my mobile application)
    -Model (here is my model)
    -ViewController (here is my Web Browser application)
    In Mobile I have
    JavaEE Web Application name: mobile-Mobile-webapp
    JavaEE Web Context Root: mobile
    ViewController I have
    JavaEE Web Application name: mobile-ViewController-webapp
    JavaEE Web Context Root: myapplication
    When I run some page of ViewController I have this URL "http://localhost:7101/myapplication/index.jspx".
    When I run some page of ViewController I have this URL "http://localhost:7101/mobile/index.jspx".
    My problem is that, I want to have Just one landing URL like that "http://localhost:7101/myapplication/index.jspx" and when I get this URL by Desktop Browser my ViewController is showed, and when i get by Mobile the Mobile project is showed.
    Someone knows how do it?
    Thanks....

    Yes, I can, thanks for response.
    But, don't have some configuration in Oracle for this? I've been thinking do this with java or JavaScript, but I was looking something more beautiful for this.
    Java or JavaScript is the only way?

  • Incident Management System for Mobile Phone (Android and IOS)

    Dear Solman Gurus,
    We have already Incident Management System in our Solman 7.1 .
    We are using it efficiently, but we want to use it in mobile phones also(android and ios).
    Also we have a web link and we can manage our incident management system in this link http://xxsolman.xxxxxxxx.com:8006/support . We are using for WEB also for Incident Management System.
    My question is ; how can i use it for Mobile Phone Operation systems(android and ios) ? Which guide should i follow ? Should i upgrade pacth or something in our solman ?
    Looks like Android application is : SAP IT Incident Management
    Best Regars

    Hi Kemal,
    You need to adopt the Mobile strategy for ITSM to use this. Broadly speaking, the ITSM apps can be accessible either via internet or intranet. If you plan to use the apps outside your company network then you would need Sybase tools to enable this as shown below;
    The detailed information is available here
    Mobile Applications for SAP IT Service Management - SAP IT Service Management on SAP Solution Manager - SCN Wiki
    Regards,
    Vivek

  • OS X Server 4.0.3 Profile Manager Settings for Mobile Users problems

    OS X Yosemite 10.10.2 with Server 4.0.3
    We are using Profile Manager to control Settings for Mobile Users, and give homeSync to the users. Our problem is that the exclude / Skip items (Items matching any of the following will not sync" This setting is not working an example. I have put this folder to Skip Items ~/Downloads but the home Sync still Syncing items in the Downloads folder.
    I have this problem on all the 3 users/machines on that server. Every client is using os x 10.10.1 og 10.10.2 I have check that the profile from the server is on the client.
    Has any a solution to that?
    Regards
    Brian

    I have no solution but have experienced failing sync settings (quite often) in both 10.6 Server and 10.9 + Server 3 (upgraded from 10.6 Server) in the same way as you described, it syncs too much. We have given up on synched home folders and will cut them and use other backup methods since we’re not so dependant on switching between different devices. Our users usually have one computer, one iPhone, one iPad and stay with those until it’s time to exchange them.

  • How to have one centeral management console for DB and Application server?

    Hi
    Thank you for reading my post
    I read in several places that ORACLE provide facilitis that help developers to have one centeral console to manage Application server / Database and what ever oracle products.
    I want to know that, when i have Oracle 10g r2 and Application server 10.1.3.1 installed, how i can use that centeral management console?
    is it some other application that i should install ?
    or it is just some more configuration?
    thanks

    What you are looking for is called Grid Control.
    You will need the Grid Control Agent installed on each server that has products from Oracle's technology stack installed (database, web server, app server, etc). You will also need install the Grid Control software and repository.
    You can download Grid Control from the following link:
    http://www.oracle.com/technology/software/products/oem/index.html

  • One Folio for mobile and web

    A client wants to use one publication (a magazine) for mobile devices (iOS, Android, Windows Store) and the web. The latter should also be usable on non-touch devices. The current solution for viewing the publication in the browser (desktop) is based on a pdf and flash.
    Is using Adobe DPS/Folio a viable solution to this problem? What is your experience with embedding Adobe Folio publications within websites? Is this possible with the Professional Edition? As the magazine is free: Do the downloads/views deduct from my 5,000 included downloads?

    You can enable social sharing to display content in the "web viewer" so that it can be viewed on non-touch computers.
    http://helpx.adobe.com/digital-publishing-suite/help/using-social-sharing.html
    You can embed this web viewer content within your website by specifying a Hosting URL. It's possible with a Professional or Enterprise DPS subscription.
    Whether this is a viable solution depends on your content and your needs. Look at different web viewer examples or build a test app if you already have a Pro account.
    Yes, the downloads/views of web viewer content counts against your fulfillment download bundles.

  • ITunes invoice management sofware for mac and iPhone

    hy all
    I'm looking for a management software for mac/iphone. I would like to save my iTunes invoices somehow. I can't print my iTunes invoices, I would like to organize them. I need some kind of app or something for management. Can anybody help me? I'm looking for my problem for a while...and I can't belive I'm the only one in this world who want to organize the iTunes Invoices.
    Regards
    (sorry for my english, not perfect)

    What do you mean by "manage" them? Manage them how? The receipts are just email messages which can be saved out to a text file and from there they are just normal documents. You're going to need to be more explict as to what you wish to accomplish with this "management" before anyone will be able to offer much in the way of useful suggestions.
    Regards.

  • Can on one domain coexist managed servers for ADF11g and Forms&Reports 11g

    Is it possible on one Weblogic Domain to exist both Managed server for ADF 11g and Managed servers for Forms 11g and Reports 11g?
    How to install on one Weblogic server these two things? Is it possible and what is recommended in this case?
    Thnx in advance!

    Hi Rade,
    Yes, i think it is possible. In my case I have one Weblogic Server Domain with 3 Managed Server,one for deploy application and the others are the Forms & Reports 11g.
    For that you have to install Fusion Middlware 11g.
    For ADF 11g i think you have to install Oracle Fusion Application.
    Edit:
    Please read the note: Installing ADF 11.1.1.3 Runtime into WebLogic 11gR1 Patchset 2 (10.3.3) [ID 1094153.1]
    Hope this help
    Regards
    Edited by: scapy on 6/Out/2011 3:14

  • Same management network for ESXi and UCSM?

    We would like to be able to use the same management network for the UCSM management interfaces and as the management network for VMs running on our blades. For example, we'd like to have the management pool for UCSM from 1.1.1.0 and the VM ESXi management network also be on 1.1.1.0.
    From what I can tell, the mangement network on UCSM is physically separate in chassis from the traffic needed to reach the blade mezzanine cards, correct? So being able to route to the UCSM management network doesn't mean we'll be able to route to the mezzanine interfaces if they use that same network.
    Since our management network (1.1.1.0) is on physically different infrastructure than our data network (2.2.2.0), we're trying to have our 6120 uplink to switches with different views of the network, two for data and one for mgmt. However, the 6120 wants to allow all vlans created on all uplinks, and this isn't working.
    A picture of what we're trying to do would look like this.
    Is this achievable?

    From what I can tell from reading other threads, I need to be in switch mode on the 6120s for this to work. Here are the relevant posts:
    https://supportforums.cisco.com/message/3021472#3021472 and https://supportforums.cisco.com/message/3023689#3023689

  • Liner Asset Management Implementation for Railway and Road Network.

    Hi EAM Experts,
    My client currently is using SAP modules including SAP PM but now for better asset management they want to implement LAM.
    Please do guide me how to implement the LAM. Please specify with the config settings and the business cycle so that it will be helpful for me in mapping
    the business requirement.
    Your help required asap. Screen shots will be highly thankful.
    This requirement is with my mutiple clients who is into Road and Railway networks.
    Thanks
    Anil

    Didier,
    >So my question is what should we do to get the most accurate data for our
    >asset and inventory in the case were deep freeze is running and reseting
    >the system at every reboot....could you suggest a processs to make it more
    >accurate.
    Duplicate.
    This post has been answered in the Asset Inventory Forum.
    Jared Jennings - Data Technique, Inc.
    Novell Support Forums Sysop
    My Blog and Wiki with Tips, Tricks, and Tutorials
    http://jaredjennings.org

  • Library management software for Mac and iPhone

    Hi all,
    This is not a support question, but I thought someone here might have an idea for me. Googling around hasn't helped much with a question I have. I have a lot of books, and would like to have software to manage them that runs on both my Mac and my iPhone, and syncs well between the two. Has anyone had good luck with anything along those lines?

    I found a couple by searching the iTunes library for "Library management", but nothing that does exactly what you want. You may want to look into a general database app such as HanDBase, which is not specifically for books, but has a lot of available pre-defined databases, can do barcode scanning, and has a desktop version that it can sync with. I've been using it going back to my Palm Pilot days.

  • Color managed workflow for web and camera raw

    I recently calibrated my monitor and was wondering what is the preferred workflow for the web? I shoot with my camera in sRGB and my working space in Photoshop is sRGB aswell. The problem that has arised now is that the color managed colors in Photoshop are way different than the non-color managed in my web browser. Is this normal? And what I don't quite get is how a photo that has an embed sRGB profile looks the same in Firefox (that understand embed profiles) and Photoshop, but in Google Chrome (that does not recognize embed color profiles) shows the colors very differently, although the browser should understand the photo is in sRGB by default and show the same colors that are in Photoshop, right? So what happens here, because the colors are not the same? What information does Photoshop assign to the embed color profile that makes the colors so different?
    Anyway, I assume the problem here seems to be my newly calibrated monitor profile. The only way I can get the same colors to my photo in Photoshop and to a photo in web is to use soft proofing set to my Monitor RGB AND save without a color profile. Is this the way to go? But here comes another problem. I shoot in RAW and use camera raw to edit my photos. Camera Raw doesn't allow soft proofing, so I'm stuck with these color managed colors that are so different from non-color managed colors I get in my browser that any color correction in Camera Raw is simply useless. Unless everyone was using color managed browsers and I could start to use fully color managed workflow, but that's not the case I suppose. So, what's the solution here?

    First off, you need to be working in sRGB, or converting to sRGB when you save out files that are destined for the web. You can change the color space that Camera Raw (ACR) send your raw files to by clicking the blue text in the bottom center of the ACR window. This is probably that safest workflow for you until you get a handle on color management. If the color of your images is very important, you might consider embedding a color profile in them, which will help color managed browsers render your color properly.
    If your display's color gamut is different than sRGB (many are), you'll find matching colors for non-color-managed browsers to be impossible. But consider the average display and take heart. The best you can do is correct to a standard and hope for the best.
    Both the convert to sRGB and embed color profile options are in the save for web dialogue box.
    More about the ACR workflow options here:
    http://help.adobe.com/en_US/Photoshop/11.0/WS739D7239-24A7-452b-92F9-80481C544F25.html
    More about matching colors for the web:
    http://help.adobe.com/en_US/Photoshop/11.0/WSB3484C68-ECD2-4fa4-B7CC-447A5FE86680.html
    http://help.adobe.com/en_US/Photoshop/11.0/WSD3F5E059-4F51-4b44-8566-13B854D3DF5F.html
    http://help.adobe.com/en_US/Photoshop/11.0/WS0B3CD652-4675-44be-9E10-445EB83C60BA.html

  • How to manage source for mobile app build by android studio,Git or team explorer?

    Hi,We use TFS 2013 for source control ,now we want to start mobile app using "android studio",
    How could control source of that project,How we can have features of "tfs source control" on that type of project such a mobile app that uses "android studio".
    I know we can integrate git or using command in team explorer but what is the differences and how to decide each one is better?
    thanks
    Thanks. Bahar Ghadami Web Developer And Technical expert

    Hi Bahar,
    As far as I know, you cannot have your code under source contorl of TFS when work on the mobile app that uses "Android studio". You cannot use Android Studio to connect to TFS hence it's unavailable for your requirement.
    If your use Ecliplse, you might integrate with Team Explorer Everywhere and connect to your on-premise TFS.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have installed the ewoq extension for mobiles and i can see it is instaled in the add on box and yet i cant see it in my pull down menu so that i can select and use tis

    it is there and i am using an earlier version of firefox just the option to use the tools menus and select mobile/destop is not there

    they made the usb camera kit because it does support usb masstorage
    usb is just a connection and drivers are required for everything some drivers are generic like mass storage
    most are not and require the manufactor to make a device driver
    but ios devices don't support 3th party device drivers so you're stuck with the build in ones
    like mass storage
    if you look into the range of supported bluetooth profiles of ios devices you will find the same problem

  • Need a common manage bean for page and its fragments

    Hi,
    I'm using Jdev 11.1.2.3.0. I have a page and its fragments (i using <af:region> to include these fragments).
    I want to create a mutual bean used for that page and its fragments.
    Beause my page fragments are contained in other BTF, so i cannot use PageFlow Bean scope and
    I don't want to use session scope and application scope.
    Could someone have any ideas ?
    Thank you.

    Hi Frank,
    I used Shared DC, but now I got an issue
    I have <af:panelGroupLayout> in my page fragment and i want to bind it to RichPanelGroupLayout in my common bean (already create Data Control for this bean).
    I cannot do this, I just can bind attributes of RichPanelGroupLayout to my page fragment.
    Do you have any ideas? Can we bind directly RichPanelGroupLayout in DC to page fragment like this: <af:panelGroupLayout id="panelGroupLayout11" layout="scroll" *binding="#{bindings.panelGroupLayout}"* ...
    Thank you very much
    Thanh Hoang

Maybe you are looking for

  • I get an error message while setting up FaceTime and imessage

    help!! I keep getting the message "an error has occurred while verifying your email" every time I try to set up Imessgae or FaceTime on my IPad.

  • Changes to sapxmltoolkit.jar from PI7.0 to PI7.1

    Hi. This question is about "XSLT Mapping with Java Enhancement". We have build numerous interfaces that uses java functions in a XSL mapping. This works fine in PI7.0, but when porting to PI7.1 it stops to work. SAP gives examples how to make this wo

  • Music keeps playing after I unplug headphones...

    Hello, I may have just noticed this but, when I have the apple headphones plugged in, and I stop the music from playing what happens is when I unplug the headphones and ipod starts playing music again. Is this a common problem? Is there a work-around

  • Wipe PlayBook, re-register with another ID, install bought app?

    Hi, I want to make calls from my z10 to my playbook. I used one blackberry ID to register them both. Unfortunately this makes it impossible to make calls from the Z10 to the PlayBook. Therefore I need to wipe on of these. My question is: If I wipe my

  • Input range for different channels

    Hi, In one of my experiments, the data I acquire in different channels have different magnitudes (in Volts). Therefore, I am trying to set a different input range to these various channels. Here's a picture (input_range.png) of a part of my VI where