AP Payment Reprot
Dear All,
i need to include the check printing report at payment time, when user click the
option print now this report will be printed , how to connect this report to this
option in R12.
Thanks
Thank you very much for your help.
I did find the reports which run from the payment batch form.
And i also gathered a custom program which transfers the file from the standard out directory to the customized one.
But there has been some change in the requirements and instead of inserting the file into the database i am picking the data from ap_selected_invoice_checks_all and ap_selected_invoices_all and inserting into a staging table from where web-methods is going to pick data and send it across to other vendor for more processing.
I know that web-methods can spool the data from the staging table every few minutes but i was searching for some way to start the web-methods procedure from oracle. I know the communicating from web-methods to oracle is possible but i am not sure how to do it other way round that is from oracle to web-methods.
TIA,
Neelam
Similar Messages
-
Payment budget is getting updated at the time of Invoice
Hi,
I have a peculiar problem in Funds Management. As per the client requirement payment has to made in split i.e. 90% and 10% against the invoice amount raised. But, payment budget is getting updated at the time of invoice itself when i use the profile of 00350.
It is observed that at the time of payment, the payment budget is not getting updated and updating at the time of invoice creation itself. So, when we developed customised report, we had given payment budget filed to know the current month expenditure. But the problem is as per cleint requiremnt, the payment budget has to update at the time of payment but not at the time of invoice creation.
Please advice me is there any way to solve this problem.
Thanks & Regards
VijaybhaskarThis is standard; payment budget is updated during the invoice issue. What is done with the payments is 'payment transfer'; it could be either manual (via FMF0) or automatic - depending on your settings in FM. In your reprots you can define to see only 'cleared' invoices in FM, i.e. those, for which the payment transfer has been completed. However, the availability control will be still performed already on invoice phase.
Hi,
As suggested by you i have done automatci payment ransfer in OF29 and made value type 54 as stastical and 57 value type for payments.
As you suggested "In your reprots you can define to see only 'cleared' invoices in FM, i.e. those, for which the payment transfer has been completed.".
Please expalin where can i look clered invoices in FM, .e. those, for which the payment transfer has been completed."
Regards,
vijay -
Draft printpout for cash payment
Hi All,
When I use Payments draft Reprot option under Banking / Outgoing Payment /Payments draft Report,
When i try to view the printprrview of Cash payment,the print is blank
Can anybody Help me in resolving this problem.
I am using SAP 2005 B in India.
Thanking in advance,hi santhosh,
Have u customized PLD template with any formulas as conditons ?
Jeyakanthan -
Hi expert,
Now i have issue in my project about incoming payment. In detail:
When you sell good to distributor and issue invoice. After that you get money from distributor. But they never pay you base on invoice and full invoice. In SAP we have 2 ways to do this:
1/ Partial payment: they can't clear because it never full invoice and in a long time they will confuse when apply money which invoice.
2/ Residual items: they can clear and know how much distributor own them. But when they do balance confirmation, distributor don't understand and don't see how much they already pay to you.
Pls help me
Thanks,Hi
Use Partial Payment method only. But, introduce a new functionality, like - Clear the main invoice using the FI document using the main invoice as reference. You can do this if the main invoice amount reaches outstanding amount upto - 20% (that means, main invoice amount 10000$, receipts upto 8000$ keep the invoice open). For this seperate process use seperate GL to post this and also use the Reference field, Header text field, etc. as reference to the main invoice. Also, create a seperate Custom Z reprot to track the things.In that report you can give the input selection with all customer details, invoice details to get the details of the customer, invoice and amount details with % pending, so far paid, outstanding, etc..
VVR -
Payment Method as Cash - Quick Pays
Hi,
I have a requirement. Payroll people want to pay all the Quickpays as Cash mode to employees.
Can any one tell how to make the cash payments & how entreis will effect.
Regards
SaiHi Avaneesh,
Thanks for the reply. If i override the payment method as cash at quick pay screen. But how the casher will give cash to the employee. Is it the manual process.
Manual Process Means: take quick pay SOE reprot and attach to the Payment Voucher & take emplolyee signature and give cash to employee & then casher pass one manual GV. Is this the process.
or Any automation is there in cash payment. Daily they want to run some 40 to 50 quick pays as Cash Payment.
Regards
Sai -
Custom purchase requsitionto vendor open and cleared payment report
dear all i develop report but i cant ableto show in that open amount and cleared amount of vender in that report so please see this report and feedback me for logic to show open and clear amount of vendor purchase orderwise or vendorwise
report zpo_purchase_history no standard page heading message-id 00.
TABLES : bsik, bsak, lfa1, lfb1, skb1, t001, bapifvdexp_vzzbepp.
type-pools:slis,ICON.
types :begin of ty_po,
banfn type eban-banfn,
"Purchase Requisition Number
bnfpo type eban-bnfpo,
"Item Number of Purchase Requisition
ekgrp type eban-ekgrp, "Purchasing Group
badat type eban-badat,
"Requisition (Request) Date
menge type eban-menge,
KNTTP TYPE EBAN-KNTTP,
PSTYP type eban-PSTYP,
"Purchase Requisition Quantity
meins type eban-meins,
"Purchase Requisition Unit of Measure
lifnr type ekko-lifnr, "Vendor Account Number
bedat type ekko-bedat, "Purchasing Document Date
ebeln type ekpo-ebeln,
"Purchasing Document Number
ebelp type ekpo-ebelp,
"Item Number of Purchasing Document
matkl type ekpo-matkl, "Material Group
mtart type ekpo-mtart, "Material Type
matnr type ekpo-matnr, "Material Number
txz01 type ekpo-txz01, "Short Text
menge1 type ekpo-menge, "Purchase Order Quantity
meins1 type ekpo-meins,
"Purchase Order Unit of Measure
balqty type ekpo-menge, "Balance Quantity
netpr type ekpo-netpr,
"Net Price in Purchasing Document
peinh type ekpo-peinh, "Price Unit
mblnr type mseg-mblnr,
"Number of Material Document
zeile type mseg-zeile, "Item in Material Document
menge2 type mseg-menge, "GR Quantity
meins2 type mseg-meins, "GR Unit of Measure
werks type mseg-werks, "Plant
charg type mseg-charg, "Batch
belnr type rbkp-belnr,
"Document Number of an Invoice Document
bldat type ekbe-bldat, "Document Date in Document
belnr_b type rbkp-belnr,
SHKZG type ekbe-SHKZG , "Debit/Credit Indicator
DMBTR type bsik-dmbtr, "Amount in Local Currency
DMBTR_C type bsAk-dmbtr, "Amount in Local Currency
thick(10) type c, "Thickness
width(10) type c, "Width
length(10) type c, "Length
grade(10) type c, "Grade
BELNR_d type bseg-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_po.
types :begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-lifnr,
bedat type ekko-bedat,
end of ty_ekko.
types:begin of ty_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
matnr type ekpo-matnr,
txz01 type ekpo-txz01,
menge type ekpo-menge,
meins type ekpo-meins,
netpr type ekpo-netpr,
peinh type ekpo-peinh,
banfn type ekpo-banfn,
bnfpo type ekpo-bnfpo,
mtart type ekpo-mtart,
end of ty_ekpo.
types :begin of ty_eban,
banfn type eban-banfn,
bnfpo type eban-bnfpo,
matnr type eban-matnr,
menge type eban-menge,
meins type eban-meins,
end of ty_eban.
types : begin of ty_ekbe,
ebeln type ekbe-ebeln,
ebelp type ekbe-ebelp,
belnr type ekbe-belnr,
bldat type ekbe-bldat,
gjahr type ekbe-gjahr,
buzei type ekbe-buzei,
matnr type ekbe-matnr,
DMBTR type ekbe-dmbtr,
shkzg type ekbe-shkzg,
end of ty_ekbe.
types : begin of ty_mseg,
mblnr type mseg-mblnr,
mjahr type mseg-mjahr,
zeile type mseg-zeile,
menge type mseg-menge,
meins type mseg-meins,
ebeln type mseg-ebeln,
ebelp type mseg-ebelp,
matnr type mseg-matnr,
werks type mseg-werks,
charg type mseg-charg,
end of ty_mseg.
types : begin of ty_rbkp,
belnr type rbkp-belnr,
gjahr type rbkp-gjahr,
bldat type rbkp-bldat,
lifnr type rbkp-lifnr,
ZUONR type rbkp-ZUONR,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_rbkp.
types : begin of ty_bseg,
bukrs type bseg-bukrs,
belnr type bseg-belnr,
gjahr type bseg-gjahr,
buzei type bseg-buzei,
valut type bseg-valut,
wrbtr type bseg-wrbtr ,
augbl type bseg-augbl,
matnr type bseg-matnr,
lifnr type bseg-lifnr,
ebeln type bseg-ebeln,
end of ty_bseg.
types : begin of ty_rseg,
belnr type rseg-belnr,
gjahr type rseg-gjahr,
ebeln type rseg-ebeln,
ebelp type rseg-ebelp,
matnr type rseg-matnr,
bukrs type rseg-bukrs,
end of ty_rseg.
types : begin of ty_bsik,
belnr type bsik-belnr,
buzei type bsik-buzei,
DMBTR type bsik-DMBTR,
budat type bsik-budat,
shkzg type bsik-shkzg,
ebeln type bsik-ebeln,
lifnr type bsik-lifnr,
end of ty_bsik.
types : begin of ty_bsak,
belnr type bsak-belnr,
lifnr type bsak-lifnr,
ebeln type bsak-ebeln,
DMBTR_C type bsak-DMBTR,
ZUONR type bsak-ZUONR,
end of ty_bsak.
types: begin of ty_bkpf,
BELNR type bkpf-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
end of ty_bkpf.
data: it_po type standard table of ty_po,
it_ekko type standard table of ty_ekko,
it_ekpo type standard table of ty_ekpo,
it_eban type standard table of ty_eban,
it_ekbe type standard table of ty_ekbe,
it_mseg type standard table of ty_mseg,
it_rbkp type standard table of ty_rbkp,
it_rseg type standard table of ty_rseg,
it_bseg type standard table of ty_bseg,
it_bsik type STANDARD TABLE OF ty_bsik with header line,
it_bsak type STANDARD TABLE OF ty_bsak,
it_bkpf type standard table of ty_bkpf,
wa_po type ty_po,
wa_ekko type ty_ekko,
wa_ekpo type ty_ekpo,
wa_eban type ty_eban,
wa_mseg type ty_mseg,
wa_rbkp type ty_rbkp,
wa_rseg type ty_rseg,
wa_bseg type ty_bseg,
wa_ekbe type ty_ekbe,
wa_bsik type ty_bsik,
wa_bsak type ty_bsak,
wa_bkpf type ty_bkpf.
data: it_fcat type slis_t_fieldcat_alv,
it_lshead type slis_t_listheader,
it_sort type slis_t_sortinfo_alv,
wa_fcat type slis_fieldcat_alv,
wa_lshead type slis_listheader,
wa_layout type slis_layout_alv,
wa_sort type slis_sortinfo_alv.
data :it_cl_data like table of clobjdat,
wa_cl_data like clobjdat.
data: values(10) type n.
data: value1(4) type N.
data: c_matkl type ekpo-matkl,
c_matnr type ekpo-matnr,
c_ekgrp type eban-ekgrp,
c_badat type eban-badat,
c_index type sy-tabix,
c_grmenge type mseg-erfmg,
c_low(10) type c,
c_high(10) type c,
c_date type string,
c_bukrs type ekko-bukrs,
c_WERKS type eban-WERKS.
data: gd_date(10).
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
*********Selection screen variables*********
selection-screen:begin of block b1 with frame title text-001.
select-options: s_bukrs for c_bukrs DEFAULT 'bmp1',
s_WERKS for c_WERKS,
s_matnr for c_matnr DEFAULT 'rm-01',
s_matkl for c_matkl ,
s_badat for c_badat ,"obligatory,
s_ekgrp for c_ekgrp.
parameters: ch_bal as checkbox.
selection-screen:end of block b1.
*initialization.
* PERFORM EVENT_CALL.
* PERFORM POPULATE_EVENT.
start-of-selection.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
perform getdata.
perform setdata.
perform fieldcat.
perform display.
*& Form GETDATA
form getdata .
select a~BANFN
a~bnfpo
a~ekgrp
a~badat
a~KNTTP
a~PSTYP
b~ebeln
b~ebelp
b~matkl
b~matnr
b~bukrs
into corresponding fields of table it_po
from eban as a inner join ekpo as b
on a~banfn = b~banfn and
a~bnfpo = b~bnfpo AND
A~KNTTP = B~KNTTP and
a~PSTYP = b~PSTYP
where a~badat in s_badat and
a~ekgrp in s_ekgrp and
a~WERKS in s_WERKS and
b~matnr in s_matnr and
b~matkl in s_matkl and
b~bukrs in s_bukrs and
b~loekz <> 'L' and
a~loekz <> 'X'.
if it_po[] is not initial.
select ebeln
ebelp
matnr
txz01
menge
meins
netpr
peinh
banfn
bnfpo
mtart
from ekpo into table it_ekpo
for all entries in it_po
where ebeln = it_po-ebeln and
ebelp = it_po-ebelp and
loekz <> 'L'.
select banfn
bnfpo
matnr
menge
meins
from eban into table it_eban
for all entries in it_po
where banfn = it_po-banfn and
bnfpo = it_po-bnfpo and
loekz <> 'X'.
if it_ekpo[] is not initial.
select ebeln
lifnr
bedat
from ekko into table it_ekko
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln.
select ebeln
ebelp
belnr
bldat
gjahr
buzei
matnr
DMBTR
shkzg
from ekbe into table it_ekbe
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp .
*if it_ekbe-shkzg = 'H'.
**ekbe-dmbtr = ekbe-dmbtr * -1.
**ekbe-menge = ekbe-menge * -1.
*endif.
* select belnr
* gjahr
* ebeln
* ebelp
* from bseg into table it_bseg
* for all entries in it_ekpo
* where ebeln = it_ekpo-ebeln and
* ebelp = it_ekpo-ebelp.
select belnr
gjahr
ebeln
ebelp
matnr
bukrs
from rseg into table it_rseg
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp.
endif.
if it_ekbe[] is not initial.
select mblnr
mjahr
zeile
menge
meins
ebeln
ebelp
matnr
werks
charg
from mseg into table it_mseg
for all entries in it_ekbe
where mblnr = it_ekbe-belnr and
mjahr = it_ekbe-gjahr and
zeile = it_ekbe-buzei and
bwart = '101'.
endif.
if it_rseg[] is not initial.
select belnr
gjahr
bldat
lifnr
ZUONR
RMWWR
WMWST1
from rbkp into table it_rbkp
for all entries in it_rseg
where belnr = it_rseg-belnr.
endif.
*if it_rseg[] is not initial.
* SELECT bukrs
* belnr
* gjahr
* buzei
* valut
* wrbtr
* augbl
* matnr
* lifnr
* ebeln
* INTO TABLE it_bseg
* FROM bseg
* FOR ALL ENTRIES IN it_rseg
* WHERE bukrs = it_rseg-bukrs and ebeln = it_rseg-ebeln and mwskz = ''.
*endif.
*loop at it_BKPF into wa_BKPF.
* values = wa_rbkp-belnr.
* value1 = wa_rbkp-gjahr.
data: aekey_1 type string .
*CONCATENATE values value1 into aekey_1.
* if it_BSEG[] is not initial.
*MESSAGE aekey_1 type 'I'.
SELECT single belnr xblnr awkey into wa_bkpf
from bkpf
where awkey = aekey_1.
SELECT SINGLe belnr
buzei
dmbtr
budat
shkzg
ebeln
lifnr
FROM bsik
INTO CORRESPONDING FIELDS OF wa_bsik
*FOR ALL ENTRIES IN it_bseg
WHERE
bukrs in s_bukrs and
lifnr = wa_rbkp-lifnr
and
*AND gjahr = it_bseg-gjahr
* AND
belnr = wa_bkpf-belnr.
insert wa_bsik into table it_bsik.
CLEAR wa_bsik.
CLEAR it_bsik.
*endloop.
* and ebeln = it_bseg-ebeln .
* select BELNR
** SHKZG
** DMBTR
* from bkpf into table it_bkpf
* for ALL ENTRIES IN it_rbkp
* where belnr = it_rbkp-belnr.
* ENDif.
IF IT_bseg[] IS NOT INITIAL.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsik into table it_bsik
for all entries in it_bseg
where belnr = it_bseg-belnr.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsak into table it_bsak
for all entries in it_bseg
where belnr = it_bseg-belnr.
ENDIF.
else.
message s002.
leave list-processing.
endif.
endform. " GETDATA
*& Form SETDATA
form setdata .
clear wa_po.
loop at it_po into wa_po.
c_index = sy-tabix.
********Calculate PR Quantity**********
clear wa_eban.
read table it_eban into wa_eban
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo.
if sy-subrc eq 0.
move:wa_eban-menge to wa_po-menge,
wa_eban-meins to wa_po-meins.
endif.
********Calculate PO Quantity**********
clear wa_ekpo.
read table it_ekpo into wa_ekpo
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo .
if sy-subrc eq 0.
move:wa_ekpo-txz01 to wa_po-txz01,
wa_ekpo-netpr to wa_po-netpr,
wa_ekpo-peinh to wa_po-peinh,
wa_ekpo-mtart to wa_po-mtart,
wa_ekpo-menge to wa_po-menge1,
wa_ekpo-meins to wa_po-meins1.
endif.
********Calculate Balance Quantity******
clear wa_mseg.
loop at it_mseg into wa_mseg
where ebeln = wa_po-ebeln and
ebelp = wa_po-ebelp.
c_grmenge = c_grmenge + wa_mseg-menge.
endloop.
move:wa_mseg-mblnr to wa_po-mblnr,
c_grmenge to wa_po-menge2,
wa_mseg-meins to wa_po-meins2,
wa_mseg-werks to wa_po-werks,
wa_mseg-charg to wa_po-charg.
wa_po-balqty = wa_eban-menge - c_grmenge.
clear : wa_rseg,wa_rbkp.
read table it_rseg into wa_rseg with key
ebeln = wa_mseg-ebeln
ebelp = wa_mseg-ebelp.
read table it_rbkp into wa_rbkp
with key belnr = wa_rseg-belnr
gjahr = wa_rseg-gjahr.
if sy-subrc eq 0.
move : wa_rbkp-belnr to wa_po-belnr,
wa_rbkp-bldat to wa_po-bldat,
wa_rbkp-RMWWR to wa_po-RMWWR,
WA_RBKP-WMWST1 TO WA_PO-WMWST1.
endif.
read table it_bseg into wa_bseg with key
ebeln = wa_rseg-ebeln
bukrs = wa_rseg-bukrs.
if sy-subrc eq 0.
move wa_bseg-belnr to wa_po-belnr_d.
endif.
* read table it_bkpf into wa_bkpf
* with key belnr = wa_ekbe-belnr.
* read table it_bseg into wa_bseg
* with key belnr = wa_bkpf-belnr.
CLEAR wa_bsik.
clear it_bsik.
read table it_bsik into wa_bsik
with key belnr = wa_bkpf-belnr.
* if wa_bsik-shkzg = 'H'.
* wa_bsik-DMBTR = wa_bsik-DMBTR * 1.
* endif.
if sy-subrc eq 0.
move : wa_bsik-belnr to wa_po-belnr,
wa_bsik-DMBTR to wa_po-DMBTR.
endif.
* clear wa_bsik.
* read table it_bsik into wa_bsik
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*clear wa_bsak.
* read table it_bsak into wa_bsak
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsak-DMBTR_C to wa_po-DMBTR_C.
* endif.
*clear : wa_rbkp.
*loop at it_bsik into wa_bsik.
*read table it_bsik into wa_bsik with key belnr = wa_rbkp-belnr.
*if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*endloop.
*********Assign Vendor,PO Date*********
clear wa_ekko.
read table it_ekko into wa_ekko
with key ebeln = wa_po-ebeln.
if sy-subrc eq 0.
move:wa_ekko-lifnr to wa_po-lifnr,
wa_ekko-bedat to wa_po-bedat.
endif.
*clear wa_ekko.
*read table it_ekko into wa_ekko
*with key lifnr = wa_po-lifnr.
*if sy-subrc eq 0.
* move: wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
* call function 'ZSD_BATCH_CLASSIFICATION_DATA'
* exporting
** ch_charg = wa_po-charg
* ch_matnr = wa_po-matnr
* ch_werks = wa_po-werks
* tables
* cl_data = it_cl_data
** I_SEL_CHARACTERISTIC =
loop at it_cl_data into wa_cl_data.
if wa_cl_data-ausp1 ne '?'.
if wa_cl_data-atnam eq 'THICKNESS'.
move wa_cl_data-ausp1 to wa_po-thick.
elseif wa_cl_data-atnam eq 'LENGTH'.
move wa_cl_data-ausp1 to wa_po-length.
elseif wa_cl_data-atnam eq 'WIDTH'.
move wa_cl_data-ausp1 to wa_po-width.
elseif wa_cl_data-atnam eq 'GRADE'.
move wa_cl_data-ausp1 to wa_po-grade.
endif.
endif.
endloop.
modify it_po from wa_po index c_index.
clear :c_grmenge,wa_po,wa_ekpo,wa_mseg,c_index.
endloop.
endform. " SETDATA
*& Form FIELDCAT
* text
* --> p1 text
* <-- p2 text
form fieldcat .
perform buildfields using '1' 'BANFN' 'IT_PO' 'PR Number' '' ''.
* perform buildfields using '2' 'BNFPO' 'IT_PO' 'PR Item Number' '' ''.
perform buildfields using '2' 'KNTTP' 'IT_PO' 'A/c Assignment Cat' '' ''.
perform buildfields using '2' 'PSTYP' 'IT_PO' 'Item Cat' '' ''.
perform buildfields using '3' 'EKGRP' 'IT_PO' 'Purchase Group' '' ''.
perform buildfields using '4' 'BADAT' 'IT_PO' 'Request Date' '' ''.
perform buildfields using '5' 'MENGE' 'IT_PO' 'PR Quantity' 'X' ''.
perform buildfields using '6' 'MEINS' 'IT_PO' 'PR Unit' '' ''.
perform buildfields using '7' 'LIFNR' 'IT_PO' 'Vendor Number' '' ''.
perform buildfields using '8' 'EBELN' 'IT_PO' 'Purchasing Doc No' '' '' .
perform buildfields using '9' 'BEDAT' 'IT_PO' 'PO Date' '' ''.
perform buildfields using '10' 'MTART' 'IT_PO' 'Material Type' '' ''.
perform buildfields using '11' 'MATKL' 'IT_PO' 'Material Group' '' ''.
perform buildfields using '12' 'MATNR' 'IT_PO' 'Material Number' '' ''.
perform buildfields using '13' 'TXZ01' 'IT_PO' 'Material Desc' '' ''.
perform buildfields using '18' 'MENGE1' 'IT_PO' 'PO Quantity' 'X' ''.
perform buildfields using '19' 'MEINS' 'IT_PO' 'PO Unit' '' ''.
perform buildfields using '20' 'NETPR' 'IT_PO' 'Net Price' '' ''.
perform buildfields using '21' 'PEINH' 'IT_PO' 'Price Unit' '' ''.
perform buildfields using '22' 'MBLNR' 'IT_PO' 'GR Number' '' ''.
perform buildfields using '23' 'MENGE2' 'IT_PO' 'GR Quantity' 'X' ''.
perform buildfields using '24' 'MEINS2' 'IT_PO' 'GR Unit' '' ''.
perform buildfields using '25' 'BELNR' 'IT_PO' 'Invoice doc. number' '' ''.
perform buildfields using '26' 'BLDAT' 'IT_PO' 'Invoice Date' '' ''.
* perform buildfields using '26' 'BELNR_D' 'IT_POP' 'A/C Doc. No.' '' ''.
* perform buildfields using '26' 'AUGBL' 'IT_PO' 'Clearing Doc No.' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'OPEN AMOUNT' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'clear AMOUNT' '' ''.
* perform buildfields using '26' 'DMBTR_C' 'IT_PO' 'Clear balance' '' ''.
if ch_bal = 'X'.
perform buildfields using '27' 'BALQTY' 'IT_PO' 'Balance Quantity'
'X' ''.
endif.
perform buildfields using '26' 'WMWST1' 'IT_PO' 'TOTAL TAX ADDED' 'X' ''.
perform buildfields using '26' 'RMWWR' 'IT_PO' 'TOTAL AMOUNT IN INVOICE' 'X' ''.
endform. " FIELDCAT
*& Form BUILDFIELDS
* text
* -->P_0449 text
* -->P_0450 text
* -->P_0451 text
* -->P_0452 text
form buildfields using value(p_col_pos) like sy-cucol
value(p_fldname) type slis_fieldname
value(p_tabname) type slis_tabname
value(p_reptext) like dd03p-reptext
value(p_do_sum) type char1
value(hotspot) type char1.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fldname.
wa_fcat-tabname = p_tabname.
wa_fcat-reptext_ddic = p_reptext.
wa_fcat-do_sum = p_do_sum.
wa_fcat-hotspot = hotspot.
append wa_fcat to it_fcat.
clear wa_fcat.
endform. " BUILDFIELDS
*& Form DISPLAY
form display .
clear wa_layout.
wa_layout-zebra = 'X'.
wa_layout-colwidth_optimize = 'X'.
* wa_layout-box_fieldname = 'SEL'.
* wa_layout-edit = 'X'.
perform build_sort using 'BANFN' '1' 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-cprog
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
i_callback_top_of_page = 'TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
i_background_id = 'ALV_BACKGROUND'
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
I_SAVE = 'A'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_po[]
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " DISPLAY
*& Form top_of_page
* text
form top_of_page. "#EC *
**********Create report header*********
refresh it_lshead.
clear wa_lshead.
**********To display date in header*********
* write: s_badat-low to c_low dd/mm/yyyy,s_badat-high to c_high
* dd/mm/yyyy.
* if s_badat-high is initial.
* concatenate 'Dated on' c_low into c_date separated by space.
* else.
* concatenate 'Dated between' c_low 'and' c_high into c_date separated
* by space.
* endif.
wa_lshead-typ = 'H'.
wa_lshead-info = 'PR To Payment History'.
* 'Pending Indents History -We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw -
Pension payment period record issue in Retiree Payroll
Dear Experts,
We are implementing Retiree payroll with new set of wagetypes and payroll area. Now requirement is that there needs to be a provision of recording the balance period of pension payment and further it should be displayed in the form of report. That means say employee has the eligibility of receiving pension from 01.12.1998 to 14.11.2015 and he has received it till Oct, 2010, remaining balance period needs to be projected in month and days like 60.14/98.12 etc.
Now please suggest how to achieve it, should we create a custom infotype for storing it or any other way is there.
Thanks and regards
TanIt is Indian payroll.
Requirement is to store the balance period of pension payment, like if one employee is eligible to get pension ( as per our pension benefit scheme) for 10 years 3months 15 days since his retirement date and has already received for 36 months i.e. 3years, we need to store and display that he is eligible to get pension for another 7years 3months 15 days in 87.15 format (i.e. 7*12+3= 87months and 15days) on monthly basis.
This will be also captured in a report later on.
Please suggest
Regards
Tan -
im trying too download apps but it saying my payment is declined when i got money in my bank
im trying too download apps but it saying my payment is declined when i got money in my bank
-
Dear Friends,
I have 2 queries -
1. Can we configured the Payment Terms which will enable while invoicing to create the multiple line item while Invoice Posting ( accounting entry ) say, while doing MIRO / FB60 transaction. And one of those would go to Special GL. e.g. we have to deduct the Retention Money @ 5% from Invoice Amount and we are using one of Special GL for Retention money so can i configure the Payment Term as -
1. 95% -
60 Days
2. 5% -
365 Days
So here 2 ( 5% ) will be posted as Special GL item while Invoice Entry.
( Currently we are transferring those entries to special gl manually using T code - F-02 from Vendor Open items )
2. We have configured the number of Payment Terms but sometimes negotiated Terms does fall into the category of existing Payment Terms and it is not possible to create the Payment Terms for such requirement. So can we configure one Payment Term which will be editable while Purchase ORder Creation or Invoicing ( like payment term with "OTHERS" would be created and initially it would be configured for 0 Days and those would be edited while making Purchase Order as per requirement.
Since this is affecting our Ageing Analysis and Payment Due Report as both are based on Payment Terms in PO.
If anyone has solution pls suggest the way to do it . will assign full marks if gets solution.
Thanks in advance.
PSHi
I think we can't maintain cash discounts more than two %.
Goto OBB8, choose account type customer/vendor.
goto payment terms segment. 1) 3% days 0 2) 2% days 15.
3) we can enter %, only days. it means no cash discount.
Regards,
Chandra -
Payment by letter of Credit against Purchase order
When we are purchasing from Foreign Vendors , we need to open a Letter
of credit (LC) .
Depending on the terms of Purchase order , Vendor will discount it /get
payment from Bank on submitting LC and other necessary documents.
Vendor's Bank, at appropriate Time will send the same to Customer's Bank
How to mapped this scenario in SAP-MM and FI .
Activities required to be updated against Purchase order :
(1) Payment Terms : 100 % against LC on delivery
(2) History should reflect LC opened - Date and Bank Name which
Vendor has suggested, our company's Bank Name
(3) LC discounted details
(4) LC payment due date to our company Bank - as Procurement needs
to inform to Finance for this.
Any help will be highly appreciated.
Thanks and Best Regards,When we are purchasing from Foreign Vendors , we need to open a Letter
of credit (LC) .
Depending on the terms of Purchase order , Vendor will discount it /get
payment from Bank on submitting LC and other necessary documents.
Vendor's Bank, at appropriate Time will send the same to Customer's Bank
How to mapped this scenario in SAP-MM and FI .
Activities required to be updated against Purchase order :
(1) Payment Terms : 100 % against LC on delivery
(2) History should reflect LC opened - Date and Bank Name which
Vendor has suggested, our company's Bank Name
(3) LC discounted details
(4) LC payment due date to our company Bank - as Procurement needs
to inform to Finance for this.
Any help will be highly appreciated.
Thanks and Best Regards, -
Payment Program Document not automatically Cleared
Hi,
We created payments through F110 payment program and the vendor invoices were paid on 14th October.
We then ran the program again on 31st October and the same invoices were paid again.
We use the payment list to manually pay the telegraph transfer.
On investigation I can see the the payment document for the one on the 14th didnt automatically create a clearing document and is still open.
Can anyone tell me how this would not clear down and how to check for such errors if they seem to go through the payment program ok.
ThanksHi,
I could look into Tolerance Groups are proper set for the Company Codees. If the Tolerance Groups are not set properly, it would stop from clearing the documents.
I also hope you have set the config. steps proper in FBZP.
Regards,
Ravi -
my client requirement is status of the po till payment i want to generate a sap query any body pls guide me purchase order ->down payment ->goods reciept-> invoice verification -> vendor payment
i want to generate this report vendor wise as well as the material and po
pls give me indetails tables and fields
advance thanks for kind replyhi,
Seelct EKBE u2013 EBELN, LIFNR
Where EKEB- BUKRS Eq (Company Code entered in the selection screen)
EKBE u2013 BEDAT Eq (Purchasing Document Date entered in the selection screen)
Select all EKBE u2013 EBELN in to EKBE
Invoice and GRN Document Number: -
Select EKEB-BELNR, BUDAT, DMBTR, WRBTR, WAERS
Where EKBE u2013 EBELN Eq EBELN Entered in the selection screen
EKBE u2013 GJAHR Eq GJAHR Entered in the selection screen
EKBE u2013 BUDAT Eq BUDAT Entered in the selection screen
EKBE u2013 VGABE Eq 1 (Goods Receipt) (in case of Invoice GRN)
EKBE u2013 VGABE Eq 2 (Invoice Receipt) (in case of Invoice MIRO)
Eenter all EKBE u2013 BELNR into BKPF and select BKPF- BELENR, WAERS
BKPF - BUKRS Eq BUKRS Entered in the selection screen
BKPF u2013 GJAHR Eq EKBE - GJAHR
BKPF u2013 BUDAT Eq EKBE - BUDAT
BKPF u2013 AWKEY Eq EKBE u2013 BELNR + GJAHR
Eenter all BKPF u2013 BELNR into BSEG and select BSEG u2013 BELENR, DMBTR
BSEG - BUKRS Eq BKPF - BUKRS
BSEG u2013 GJAHR Eq BKPF - GJAHR
BSEG u2013 BUDAT Eq EKBE - BUDAT
BSEG- BELNR Eq BKPF u2013 BELNR
For Payment Document Select BSEG u2013 AUGBL
Where BSEG- BELNR Eq BKPF u2013 BELNR
BSEG - BUKRS Eq BKPF - BUKRS
BSEG u2013 GJAHR Eq BKPF - GJAHR
BSEG u2013 BUDAT Eq EKBE - BUDAT
Eenter all BSEG u2013 AUGBL into BSEG and select BSEG u2013 BELENR, DMBTR ,
Where BSEG u2013 BELNR Eq BSEG - BSEG u2013 AUGBL
For Advance Payment Document Select BKPF u2013 BELNR, WAERS and KURSF
Where BKPF - BUKRS Eq BUKRS Entered in the selection screen
BKPF u2013 GJAHR Eq EKBE - GJAHR
BKPF u2013 BUDAT Eq EKBE - BUDAT
BKPF u2013 TCODE Eq FBA7 and FBA6
Enter all BKPF u2013 BELNR into BSEG and select BSEG u2013 BELENR, DMBTR ,
Where BSEG- BELNR Eq BKPF u2013 BELNR
BSEG - BUKRS Eq BKPF - BUKRS
BSEG u2013 GJAHR Eq BKPF - GJAHR
Reagrds,
Rama Mohan -
Vendor Downpayment Request Payment Order
Dear All
We are processing most of our vendor payments through Automatic Payment Program which initially create the payment order and later once we upload the EBS system clears the vendor open item. All the vendor open items which are having payment order are locked and cannot be cleared without payment order. This is a control so that no duplicate payment can be made. But we recently found a flaw in SAP where although normal open items are blocked but in case if there is any payment order for downpayment request, we can still process the payment through F-48 meaning we can create the down payment for the DPR for which payment order exist so there is a chance of duplicate payment to vendor. Please advise if someone face the same issue and is there any solution to control it.
Best Regards
Farhan QaiserHi,
F-47: Down Payment against PO
regards,
Sanju M S -
Custom clearing agent payment issue
Dear experts
Purchase order was created and the material was received on port (imports).
custom clearing agent has cleared the goods.
now custom clearing agent needs his charges.
the inv from vendor with reference to PO is not received.
any solution to settle the custom clearing agent payments.
till the inv. from vendor not received custom agent payment is is pending.
what should be done to resolve this issue.Hi,
Copy one of your freight condition types and create a new condition type as custom clearing charges, please ensure that condition category is Delivery charges (B). In calculation schema enter this condition type at the appropriate position. Now when creating the PO, enter this condition type put the value, then select this condition type and go to details, here you will have a field to enter the vendor code, there key in the vendor code of custom clearing agent.
Now in MIRO enter PO no. and choose layout for Planned delivery cost, you can now enter the value for your agent and pay him.
Note: Please use this to pay only for service charge for the agent, for payment of custom duty you should use the condition type for custom duty and key in the vendor code for the customs clearing office there so that its easy to differentiate between custom duty and the service charges charged by clearing agent.
Regards
Chandra Shekhar -
Vendor Down Payment Clearing: F-54 or F-44
Hi
I have made a down payment (with Spl. GL indicator) to a vendor, using F-48. Then I book an invoice using FB60. I kept the two amounts same and ignored WT to keep things simple.
Now i want to clear the down payment against the invoice. I use F-54. The clearing transaction is getting posted. However, the Invoice is lying open (credit entry) along with the Clearing document (debit entry). On the other hand the down payment document (debit) is getting cleared with the Clearing document (credit entry). This means I have two open line items and two cleared line items. I can clear the two open items again using F-44.
I have two questions:
1. What is the use of F-54 here since I have to use F-44 eventually?
2. While doing F-54, Posting Key for the debit line item is 26 : Payment Difference. This is could not understand.
Can anyone please help me out on this?
Thanks in advance
AnindaDear Aninda ,
I will explain you with following example.
Recon account(Vendor)---3000000
Advance to Vendor----
4005000
Exp a/c----
7575100
Bank a/c----
5000100
1. Advance to Vendor (spl gl -A)(F-48)
Vendor a/c (SPL-A)( GL- 4005000) DR 1000
T0 Bank a/c (GL-5000100) 1000
2. Invoice posting
Expenditure a/c ( GL-7575100) Dr 1000
To Vendor Account(GL-3000000) 1000
3. Clear Vendor Down Payment (F-54)
Vendor a/c (GL-3000000) DR 1000 (Posting key-26)
To Vendor a/c (SPL-A)( GL- 4005000) 1000
It means Credited spl GL-A has converted from advance to Normal open item. Amount has been transferred from Advance to Vendor GL to Normal Recon account.By this way Advance account shows Nil Balance with debit(F-48) and Credit (F-54)
The remaining 2 line items i.e., Credit (F-43) and Debit (F-54) shows as open items. In the next step we need to knock off those line items by manual clearing or automatic clearing.
4. Normal Clearing (F-44)
It will be posted without line items.
I hope i am able to help you out to understand process
Maybe you are looking for
-
I want to change some security settings in my Apple ID and it asks to answer some security questions that I have no clue why I am answering them wrong. So then I check off send a reset email to change them and the email address comes up with an old e
-
Item catogory TAK was delete from standar system.
Good days. I have a little question, i try find the item catogory TAK in the sistem in SAP ECC 6.0 Enhancement Package 4, someone know why this item category was delete from the standar system, i search for it in several systems, but i can´t find it,
-
Urgent!! Process Chain Failure!!
Hi Guru's: One of our PC's failed today with the below error message: @5C@ Process Local Process Chain, variant SF 45 Account Recievable Tran. Data. has status Canceled (instance 2L9PVZWCAX8DTIDK5TFKL1T @35@ Help needed! Rgds, BH
-
hello, i have lost my ipod (5th generation) and i have tried to use ' find my iphone' but it says my ipod is offline so i think its dead....what should i do?
-
[SOLVED] gnome :: suspend item in user menu
I did find out that there is new gnome after update last night . They put power off item instead. http://library.gnome.org/misc/release-n - nu.html.en They also saying that pressing ALT you should be able to suspend. so opening user menu and pressing