AP Problem - 1130AG/1131AG Red-Orange-Green Cycle

Hi
I've got a Cisco Aironet 1131AG AP and I am getting the Red-Orange-Green cycle of lights on the front. I have a feeling this might be to do with bad flash of some sort.
I have a DB9 -> RJ45 cable and I'm able to connect to the AP using PuTTY. The AP gets an IP by DHCP but the web interface isn't accessible. It is on a basic home network without any forms of servers.
Is there any way I can fix this problem?
Regards
Anthony

Does the product number on the access point start with AIR-AP or AIR-LAP? I believe that you have an AIR-LAP that is a lightweight access point meant to be used together with a wireless controller. If this is the case and you want to use it as an autonomous access point without any wireless controller, then you must change software on this access point.
The URL leolahoo provided to you have the procedure on how to change software on your access point. Before you start you need a TFTP server and software for your access point which must be renamed to c1130-k9w7-tar.default
Using a TFTP Server to Return to a Previous Release:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Similar Messages

Red/Orange/Green indicators for ios 6 maps?

I just updated to ios 6. Every morning I check my maps app to see how the traffic looks for a couple of routes I can take to work. This morning, with ios 6, there was no information. It seems it only shows when its red. This is completely frusting because I know that both these routes can have slow "orange" patches every morning. Will they be adding red/orange/green indicators to ios 6 maps?!

We are not Apple employees and you may know that already. This is a forum for users with technical questions and problems. You are entitled to your opinions and you are entitled to be disappointed. Let Apple know how you feel.
http://www.apple.com/feedback/ipad.html

Photoshop CS6 main screen mac red orange green buttons disappeared

Help - I would love to reinstate these - no idea where they have gone. Can I get them back?
THanks in advance
Louise

The screenshot shows Ps in mode "Full Screen with Menus" which is what I was talking about at the beginning. If F key isn't cycling the modes then the lowest button on the Toolbar has a flyout for the three modes. Menu View > Screen Mode contains the three modes, too. Switch mode to Standard.
Edit > Keyboard Shortcuts will let you assign F or some other key to the modes if your setup somehow doesn't have these default shortcuts.

When I go on-line using Yahoo, the words in any article start to blurr, and turn different colors, red, orange, green. Can't read

Even while typing this it does it. I have to reload to clear. But it doesn't stay cleared. It's only on Yahoo, Not on Google. This problem started after Yahoo's New Home Page. coincidence? I have tried changing the fonts and colors but doesn't correct it. I also have IE but with Yahoo, and it does it.

Are you using any theme in firefox?
Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.

Playbook displaying my photos:- washed-out, reds and greens look faded,

Hello x Im new here just got my Playbook
Can anyone help with this.
Two weeks ago I bought a Blackberry Playbook from Simply Electronics over the internet simplyelectronics.net. The website was in english money, union jack icons plus english phone number. I phoned customer services about an issue just to check the firm out, then went ahead with my purchase and received it in four working days.
I have since found out, like many other people who ordered from them, that Simply Electronics is in some other country - I do not know if it's China or U.S.A. I would never have known if I had not looked them up on the net for reviews. They seem to have changed their website now to American dollars.
That is not the essential problem though, this is:-
The Blackberry Playbook, though superb, slick and working fine in all ways, has a problem with displayment of colour photographs. The colour is washed out, particularly reds and greens. Photos which look vibrant on my Sony Xperia phone and on my computer, look very jaded on this tablet, although the resolution and clarity is superb. It's not just the saturation that is poor. There is a colour bias.
I am a photographer and I primarily got this tablet specifically for showing photos to people (taken with my Canon SLR camera and my Sony cameraphone). It is now gutting for me to see the vibrant reds coming up as a burnt orange or browney red. Grass looks washed out and not lush as it was in the photo.
I do believe there is a fault with this Playbook.
Do you know if this is a known problem or issue with the Blackberry Playbook or with Tablets in general. Do you know what I could do about it? Do you know how I could get in touch with Blackberry to tell them about it.
Returning it to SimplyElectronics if they are in another country would be expensive and I may just get another Playbook with the same or a different fault - too much hassle.
I do not know what my best course of action would be. Can you help.
The fact I got the Blackberry Playbook for £204 postage free, is some consolation as it's a good item with no other flaws, but when I see my photos on the screen, the colour problem seems too big a deviation from normal to be satisfied with it.
What can you advise. Is this colour wash-out a common thing. How do I contact Blackberry?
Carolyn

I don't know have this issue with pictures and images. The color rendition is superb. It is not a general fault of the Playbook.. there could be some issue with the one you have.
First, try a reset of the Playbook. Press and hold the Power key, up and down volume (-/+) all three buttons simultaneously, for about 10-12 seconds. You should the red LED blink and that should allow a reset of the PlayBook and to power up. Afterwards, do the images appear any better?
You have 90 days of free technical support for your Playbook. http://us.blackberry.com/support/playbook-support/contact.jsp
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP ePrint red or green status on Android

I have an HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g and have been printing quite happily to it from my Android phone using the HP ePrint app. Recently it has stopped working and I have a red dot as the status on the left instead of the usual green one. I have checked that I am running the latest version of the app and that the firmware on the printer is also at the latest version. I have the same problem from my other two Android devices (another phone and a tablet). I have tried rebooting the printer and resetting and removing and installing the app, but there is no change. I can print to the printer from my desktop and laptop without problems though.
What does the red dot indicate? I haven't managed to find any information or help on the app so that I can diagnose the problem.

@aptanet
If you are using the updated app then you are observing correct behavior.
To answer your question regarding the red and green lights. Red = busy and green = ready.
If your printer has a printer being sent to it or is being prepared for a print job from either the PC or a mobile device. The mobile device will observe the printer as "busy" thus the red light.
If the printer you are sendin your print job to is in the ready state and able to send a print job to it, then a green light will be beside the printer icon.
If it is bouncing back and forth, please make sure that other devices are not sending print jobs to the printer a the same time the app is trying to send a job to the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Iphone 6 while plugged in during night lit up, screen turned red then green then black. Apple icon comes on and won't work for 15 minutes

IiPhone 6 plugged in to recharge, lit up, screen turned red, ro green to black and could not get it to work. Pushing buttons cause Apple icon to appear, then did the color thing again. After unplugging for 15 minutes, it seemed to reboot and work fine all day. This occured 2 at hotels on 2 different days. Anybody have this occur and know what the deal Is. Working fine now.

See what happens tomorrow New software update iOS 8.1 out tomorrow If the problem comes back try and take photos of screen and return IPhone to store for replacement. Bsydd uk

How can I remove red and green lines from a footage?

I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

@Ann Benns
I will try to do that. Thank you!
@Bill Hunt
Well, the raw footage is an avi filmed with a handycam. This error occurred
the next day after I finished the editing in Adobe Premiere cs5. It might
be something wrong with the title graphics that I use, but still if there's
a solution I would like to find it out as this error occurred before.
Cristina

My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
Red for message or applicaiton notifications.
if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red orange flash on startup then black screen

My macbook was working well one second, and thewn the screen went black. I tried rebooting, but i get a quick red/ orange flash on startup and then a solid black screen. The computer still works, I'm listening to music from it as I write this...
Based on what I've read so far, it seems the only solution is connecting an external monitor or paying out about £200.00 to have a motherboard reinstalled?
Has any one got any thing else on how to tackle this problem?
Thans for any advice!

You need a new screen or new GPU depending on what has gone bad. If the motherboard/GPU is bad then you will not be able to use an external monitor. So if you can use an external monitor then it's more likely that the screen is bad.

Whats the real name of the orange, green and black 3.5mm jac

So what is the real name of the three orange, green and black 3.5mm jacks?
Only i cant really search for orange, green and black anywhere other than here

yourdogsmom wrote:
Yeah but is there not a name for all three cables?
EXAMPLE - red/white/yellow are scart cables.
scart cable doesn't have any color....http://en.wikipedia.org/wiki/Scart?red/white/yellow are A/V cableyellow for video, red and white for audio. Those 3.5mm cable Creative uses are simply stereo cable. What Creative do is join 3 pieces of stereo cable together only. Nothing special about them.

Attempt to play video in timeline causes red and green lines in Canvas

Hi!
When I hit the spacebar in FCP's timeline to play, sometimes I get red and green lines in the Canvas (looks like some wierd color digital interference). If I then hit the spacebar again, the audio will play, but with the same red & green lines. If I then hit it a third time, my video will play fine.
What the heck? Any ideas? This only happens every once in a while.
Thanks for the input!
My specs:
G5 Dual 1.8 GHz processor
Version 10.3.9 OS
4GB Memory
QT version 7.0.2
not connected to the internet

To be sure you'll need to include some more details, what version of FCP, and your current sequence settings, but I think I could make an honest assessment, right now. Make a note of your sequence settings, then trash your preferences, but make sure that you close final cut, also once preferences are trashed you'll lose sequence settings, and window configurations if you haven't saved them. So be sure to back them up, before trashing preferences.
You can find preference by following these commands:
1.type shift command h - this opens up your home directory
2.open the Library folder //----SPECIAL NOTE Be very careful in this folder do not move or delete any folders in here.----\\
3.open the Preference folder //----SPECIAL NOTE Be very careful in this folder do not move or delete any folders in here.----\\
Now find and delete these 4 files:
1.com.apple.FinalCutPro.plist
Navigate to the Final Cut Pro User Data inside the Preference folder and delete the three remaining Final Cut Prefs Files They are as follows:
2.Final Cut Pro 5.0 Prefs //*This may be 3, or 6 depending on your FCP version.
3.Final Cut Pro Obj Cache
4.Final Cut Pro Prof Cache
Remember do not trash any folders period, nor move anything, delete on those 4 files, and remember once you delete them make sure you trash them from the drive, go to trash empty trash. You'll have to reconfigure any unsaved layout workspaces and system sequence settings.
This Clean system should be done once a year, but only if you notice FCP having problems.
Hope it helps.
J.

1 color solid color to red/blue/green constants

Hi,
Does anyone know how to convert 1 color.
lets say ORANGE.
its red value = 16448250
its green value = 29535
its blue value = 16711680
is there a way to know what ORANGE and its red/blue/green value?
i guess to do something like this?
thanks in advance
Message Edited by krispiekream on 03-16-2010 11:52 AM
Best regards,
Krispiekream
Solved!
Go to Solution.

Try the Color to RGB VI:
Misha

Green, Orange, Green...

I have a question... My battery is on its 85 cycle, and well, when my battery is charging, every once in while the Light flashes Green, Orange, Green, Orange... and doesn't stop. What does this mean? Do I need a new battery? I have no idea... thanks for your time and help....
Sincerely,
Cubo

I was noticing increasing "time until charged" times on my macbook; it also had the symptom of shutting down with no warning when I was sure that there was at least 33% left on the battery, if not more.
Today, I brought it into the Genius Bar and the Tech reset the SMC and it appeared to work there - but he failed to check to see if it would accept a charge from an A/C power supply. I got home and plugged it in and now the light flashes from green to orange and back to green. Additionally, the time until charged has increased from 55 mins when I first plugged it in to 3hr15mins as I write this. It's still holding steady at an 85% charge the whole time.
Other symptoms:
* If I unplug the A/C adaptor, the fan calms down.
* If I use the small adaptor plug (instead of the long cord), it started to charge normally, but now appears to be counting up again in charge time and the flashing is back. Darn.
* I have two batteries (I bought an extra for long bus rides just a month ago and the other is the replacement I got from the original silent recall). For both batteries, the "time until charged" increases after being connected to A/C power. It looks like it flashes from orange to green for one of them (the elder) and not the other.
My guess is that the A/C adaptor is kaput. I'll take it in tomorrow and update the thread with any progress.

BUG: Vertical Red/blue/green on right during video transitions (SOLVED)

I was getting this phantom vertical bar on the right side of the video, and it took me 2 hours to figure out what was causing it. The video size of the sequence was 595x222 (it's for a flash element on a website); This glitch occured across all media types at this resolution: jpegs, mov, whatever. During the cross-dissolve (or any transition) a red vertical var would appear and would cycle colors to red and green during the transition. It showed up in the final exported render as well.
THE SOLUTION: I changed the width by 1px. That's it. I have no idea why that worked, but it fixed it– no more random color bar. It may have something to do with the width being an even vs odd number or not, or the aspect ratio of the height and width. Anyway, I hope this helps someone, and Adobe- put this on your to-do list.

Thank you for posting your fix.
Appreciated,
Hunt

AP Problem - 1130AG/1131AG Red-Orange-Green Cycle

Similar Messages

Maybe you are looking for