AP REPORT AGE WISE, VENDOR WISE REQUIRED

Hi,
Please give me if there is any T-code to get the AGE wise VENDOR wise AP report at on go as we know the report code ( S_ALR_87012078 ) only for the same, in which, unless otherwise, we go for drill down this report further, the report is being displayed for one vendor only and next we have to scroll to get the another vendor. This will not be helped to analysis in one paper.
In view of the above, we need all your help to get the AP report with my above requirement in SAP Standard T-Code - if any, ( or ) please confirm whether we need to go for development thro ABAP for the same.
Please guide us immediately - if possible.
Thanks
G. Janarthanan

Hi,
Check this below reports for aging purpose for vendors
S_ALR_87012084 Open Items - Vendor Due Date Forecast
S_ALR_87012085 Vendor Payment History with OI Sorted List
S_ALR_87012104 List of Cleared Vendor Items for Printing
S_ALR_87012105 List of Down Payments Open On Key Date - Vendors
Hope this helps. Do not forget to assign points if helpful
regards,
radhika
Message was edited by:
kolipara radhika

Similar Messages

B.area wise,vendor wise,reconciliation account wise balances

Dear seniors,
My client has 5 b.areas, 6 Vendor groups, 6 recon accounts.
some vendors are common to all business areas, that's why from all business areas postings happen to some vendors.
that's y my client wants to see business area wise ,vendor wise,and recon account wise balances.
as i checked there is no standard report for the above requirement.
please guide me how can i guide Abaper.
with regards,
Bhuvan

You can change the layout in standard report FBL1N for vendor line item display and subtotal by business area,GL account,account (vendor). Also you can collapse each of the above subtotal criteria so that you dont have a huge list of all items.
Thanks and regards
Kedar

Raw material stock report with vendor wise

Dear all ,
Can any one tell me , How do I get stock report only on " VENDOR " wise .
The purpose is , I've multiple souces for one Material , I need analyse the available inventory with vendor wise.
Pl.s help
Thanks in Advance
Sekhar

Hi,
1. Once you receive the mateiral inside the plant the identity of vendor is lost.
2. All the stock will get as Plant / Sloc Stock only.
3. Incase if you need vendor wise stock then you need to activate batch management, with Classification view and one characteristics as vendor.
4. And during each GR you need to enter the vendor value
Else you will not be able to seggregate the available stock vendor wise.
reg
dsk

Standard report on vendor wise QC rejection

Dear All,
Can any body suggest me a Standard report to find vendor wise quality rejections for a period.
Regards
Kantha

Hi
ME64 , ME6D ,ME6C ,ME65 - Vendor Rating - These report is useful to extract information of supplier performance on various parameters such as delivery, quality, cost etc.
Regards
Anand

B.area wise and vendor wise report

Dear seniors,
My client has 5 b.areas,
some vendors are common to all business areas, that's why from all business areas postings happen to some vendors.
that's y my client wants to see business area wise ,vendor wise balances.
please guide me how can i guide Abaper.
with regards,
Bhuvan

Statement: some vendors are common to all business areas
Question: Where do you create vendors per business area??
You can change the field status of the posting keys relating to vendor such as 31, keep business are as mandatory.
Some of the standard reports must suffice your reporting reaquirements.
otherwise need to create a form and report (FKI4 and FKI1)
Regards,
Ravi

Vendor wise payment term or po wise payment term with details

Dear All,,
Please provide us detail of payment terms from PO Sr. No. 5500000839 to 5500001284 . any sap standard report of any sap standard tcode
or
vendor wise payment term or po wise payment term with details
with warm regards
pritpal

PO wise payment term u can get in ME2n report..
Vendor wise from LFM1 or LFA1 table
Check MKVZ report

Ageing wise vendor and customer report

hi....
Where i can get ageing wise vendor and customer report?
Thanks & Regards
Rekha shrama

Hello
First configure credit management & customise.
A/R Summary
Degree of ageing
You can set the allowed degree of ageing in Customizing for Sales, under Basic Functions ® Credit Management/Risk Management ® Credit Management ® Define Automatic Credit Control.
Under Checks in financial accounting/ old A/R summary, you can enter the permitted degree of ageing for the A/R summary, in the fíelds Permitted days and Permitted hours. Here, you can define how old the A/R summary can be, in order to be called up for a check. If the permitted degree of ageing for the A/R summary is exceeded in the credit check, then the document is blocked.
Fields allowed days and allowed hours are only available for entry if you have entered an X in field Read A/R Summary in Customizing. The path is: Accounts Receivable and Accounts ® Credit Management ® Credit Control Account ® Make basic settings for credit management.
Updating
The A/R summary is either sent periodically (with the help of the report RFCMCRCV) from central Financial Accounting to the decentralized Sales and Distribution units according to ALE distribution model or, if an obsolete A/R summary is presented, updated for the credit check by the system per remote function.
In order that the system is burdened as little as possible, SAP recommends you stick to the following order:
Program run: Incoming payments in central FI
Program run: Distribution A/R summary from central FI to decentralized Sales and Distribution units
Program run: Renewed credit check for blocked sales documents in decentralized Sales and Distribution units
Status Management for Obsolete A/R Summary
If the A/R summary is obsolete, the credit status Credit data obsolete is set. This means that the document is blocked, and appears in the credit representativeu2019s worklist. In Customizing for Sales, in the section Automatic Credit Control, for the single, aforementioned checks, for which FI data is necessary, you can define whether a warning appears in the obsolete data, or whether a status is set.
If you are working with the A/R summary, and would like to re-process obsolete data, it is recommended that you set a status.
Reg
suresh

Vendor wise sales report

Hi Expert,
Client requirement is like this
Client procure "Article-ABC"from different vendors like Vendor 1, vendor 2, Vendor 3
and client do the sale to his customers
now client want to know how much "Article-ABC" sold from with respect to vendor1, and vendor 2 , vendor 3
Note:-
1) client raise @ 50 PO everyday to different different vendor
2) and each PO contain minimum 300 to 500 different- different Articles
if we generate the batch for each Articlel w.r.t vendor then @ 25000 batches will be generate everyday
please suggest
Edited by: Hanumant Nimbalkar on Jun 23, 2009 2:16 PM

Dear Hanumant,
You have to use Consulting Skills here; Vendor identify looses as soon as GRN done.
Option No. 1 : Since you are using SAP IS Retail, you can use Vendor Consignment to track Vendor wise sales
Option No. 2: You can develop customized report using following (suggested) logic;
(a) Vendor A - Article A - EAN Code 1
(b) Vendor B - Article A - EAN Code 2
(c) Vendor C - Article A - EAN Code 3
Since, Sales are happening through POS using EAN Code, you can extract all relevant information including EAN Code from POS System.
I hope this will suffice.
Regards - Muralidhara

Project Wise -- Vendor Liabilities Aging

Hello Experts,
How to see project wise "Vendor Liabilities Aging" report. If it's available through query Please share the query. Please help me in this issue.
Regards,
Umamahesh.

HI
When you click the "Vendor Liabilities Aging",you will get a selection criteria window..
After selecting the criteria and clicking 'OK' will get you a report right..
When you get the report,click "Form Settings" window and in 'Table format',you will find 'Project Code' which made invisible by default,so you make it visible by clicking the 'Visible' check box..and click ok...
Then the project code also appear in that report...
Got it?..revert me for any clarifications...

Project Wise Vendor Outstanding Report

Hi PS Experts ,
We have implemented PS ,MM, FICO Module .
My requirement is to show the Project Wise Vendor Outstanding Balances .
The Item posted in BSIK and BSAK tables are not populated with neither Network nor WBS Element .
Could you please suggest me is there any additional functionality we have to implement to make the Network/WBS element populate into BSIK and BSAK Line Items ..
Sorry though the question might be related to FI and PS , I decided to post in Project system area .
Thanks in Advance ..
Regards,
Kishore.S

Hi Shrikant,
Thanks for your Reply .
I checked 2 reports and no where the combination of Vendor and Project was seen .
My requirement is to display Vendor and Project wise reports .
Example Let me say like
Project , Vendor , Amount Balance
XX,Test,1000
SubTota 1000
XX,Tet1,1100
Subtot 1100
YY,Test,1000
Subtot,1000
Can you explain me some logic like where to start(Tables Like BSIK,BSAK) and how to process data ,like which table to start and end with .
Regards,
Kishore.S

Vendor wise payment report

Dear Experts,
I need to have a report that shows all the details of vendor wise payment reports is there any specific transaction codes to resolve this issue
Regards,
Ramakrishnan. S

Hi
The simplest I Could think of is FBL1N itself with cleared Items. You can always subtotal on Vendor No and Payment Document type. There are other std reports like S_ALR_87012085, S_P99_41000099. It also depends on what kind of information you want from the payment report
Regards
Sanil Bhandari

Vendor wise drill down in Trial Balance or Balance sheet report

Dear Experts,
Is there any report for Trial Balance or P&L/ Balance Sheet report where vendor wise drill down of amounts is possible?
Please suggest.
Regards
Komal

Hi Dear ,
You can use F.08 for Trail Balance and Vendor details - S_ALR_87012082 - Vendor Balances in Local Currency
You can get cumulative balance for the vendor.
Regards
Radha

Report to see the g/l balance vendor wise

hi experts,
i need to check the balance of one g/l "tds on contractor" vendor wise.
but i am unable to get the information vendor wise.can anyone give me some idea by which t code i can see the report?
Thanks
Regards
Konishko

Try this...
Using FBL1N (Vendor Line item Display) you can click on "dynamic selections" at the top and add the GL account to the search criteria. That way you can display only the open item information for any vendor for one particular GL account.

Create a Vendor wise cancelled PO's report.

hi,
I am Beginner, PLEASE HELP ME
Create a Vendor wise cancelled PO's report.

I am Beginner, PLEASE HELP MERead a book about Oracle Reports or go to OTN:
http://download.oracle.com/docs/cd/E12839_01/bi.1111/b32123/toc.htm

Business Area wise Vendor & Customer Line item report

Hi
We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
Regards
Debojyoti

Hi,
In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
Check once it may help you
Regards,
Sankar

AP REPORT AGE WISE, VENDOR WISE REQUIRED

Similar Messages

Maybe you are looking for