AP's keep on downloading new image after upgrading wlc

Hello, I am trying to upgrade my 2504 wlc to 7-3-112-0 software version. This succeeds, however the AP's keep in a loop to download the new software from the controller. These messages appear on the console of the AP:
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
., 1)27 13:46:19.901: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST
*Jun 27 13:46:19.901: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.5:5246
*Jun 27 13:46:19.904: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jun 27 13:46:20.095: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Jun 27 13:46:20.215: capwap_image_proc: problem extracting tar file
*Jun 27 13:46:36.211: %CAPWAP-3-ERRORLOG: Go join a capwap controller
examining image...
*Jun 27 13:46:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.5 peer_port: 5246
*Jun 27 13:46:38.897: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.5 peer_port: 5246
*Jun 27 13:46:38.899: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.5perform archive download capwap:/c1140 tar file
*Jun 27 13:46:38.903: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
Actually I don't know what to do now. Maybe strange is that when I upgrade 7.0.220 software to 7.3.112.0 the wlc hangs after a while and I have to unplug power. Then after reconnecting the power, the unit has the new release.
Reason for the upgrade is.... Windows 8 clients cannot establish a wireless connection! It seems that this issue is resolved at least in the version I try to put on it.
Thanks for any help
Ralph

Hi Ralph
Did you by chance push the Russian LDPE code to your wlc ?
What is the full file name of the code you upgraded to ?
Sent from Cisco Technical Support iPhone App

Similar Messages

My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

Basics from the manual are restart, reset, restore.
Try those

CS5 can't preview the fonts image after upgrade the OS X 10.10.1

My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

Ipad keeps saying passcode is incorrect after upgrade to ios6

Just purchased new iPad, after upgrading to ios6 it will not accept my passcode? Any tips?

Have you tried rebooting your iPad and hopefully a system reset would clear this issue up?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
However, if you can't get the iPad to accept the Passcode, you will have to restore it.

Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

I can't add new contacts after upgrading from Snow Leopard to Mountain last week. I do not use iCloud. Any suggestions?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Firefox 15 keeps on downloading YouTube videos after I close the video page

Since I have the last Firefox 15 update, I noticed Firefox keeps on downloading the video on YouTube after I close the video page or when I go back to previous page and this until the video is over. This did not used to happen with Firefox 14, so I installed Firefox 14 until this problem is fixed.

The Shockwave and Java applications may need 'PLUGIN UPDATE' for newer versions. Suggest a check for any outdated PLUGIN UPDATE found from the Mozilla Firefox Toolbar 'Help' Menu > 'Firefox Help' > [lower right margin displays link to more info to review and 'UPDATE PLUGIN's!

MDT Capturing an new image after deployment

Hi
I have captured a reference image and deployed it. I edited the custom.ini file and bootstrap to have practically zero touch deployment. I did find that I had to connect to the mdt server and run litetouch.vbs to capture the image from the reference
machine. My question is once the deployment was done I wanted to capture a new image from a new reference machine and wasn't able to do it when running litetouch.vbs. It would through out an error of cant find ini. I uninstalled mdt and reinstalled it with
adk and can now capture again. Is there another way? I don't want to have to uninstall mdt each time. Is this because I edited the custom.ini file ?
Thanks

Hi Bronty12,
Base on my experience, your issue may caused by need to clean MDT, please refer the following thread solution first and there have a specific form to support the MDT issue,
you can ask in that forum there will more MDT expert to support you.
Dirty Environment found
https://social.technet.microsoft.com/Forums/en-US/36ed037b-51b1-4053-a248-46bd3ac9ecda/dirty-environment-found
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Unable to Download Podcast" error after upgrade to iOS7 - iPhone 4S

Hey all,
Since upgrading to iOS7 on my iPhone 4S, the Podcasts app is no longer able to download new Podcasts directly from the app. I keep getting the error "Unable to Download Podcast" with the option to Retry, which always fails. This happens on both 3G and WiFi This error applies to any of my Podcast subscriptions. It was working fine on iOS 6.1.3. I have tried deleting it and re-installing it. I've toggled the Podcast app Settings. I have an iPad 3 WiFi and I haven't had the issue.
Anyone else experiencing this? Anyone know how to fix it?
Thanks,
John

Hi neocec!
I have a couple of suggestions for you that will help you troubleshoot this issue. First, you should try to reset the iOS device by following these instructions:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If you are still experiencing issues after attempting that troubleshooting step, you will want to restore your iOS device according to these instructions:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks for using the Apple Support Communities. Have a good one!
-Braden

My iPod Touch can no longer download Podcast Videos after upgrading to iOS4

After upgrading OS 3.1.3 to iOS4, My iPod Touch (2nd Generation) can no longer download such video podcasts as NBC News, CBS News, ABC News and Cranky Geeks from iTunes store. The moment the download starts, there is always an annoying prompt "this video cannot be played on this iPod".
It's really frustrating!!!

Same thing happening to mine also, still cant find a reason.
Message was edited by: glynn1019

Creation of new listener after upgrade

Hello!
Is it obligatory measure to create new listener in enviroment of 11.2 after upgrade 10.2 database?
I keep Oracle Database Software 10.2 in former location and change Oracle_home in listener.ora file
Thanks and regards,
Pavel

It would be always better to have the listener running of the upper version to support the database of the same release and of lower release. Can't say its obligatory, preferred may be.
Aman....

No images after upgrading to MX7

After upgrading to ColdFusion MX7 I noticed my exisitng .cfm
pages are no longer displaying images on the local testing server.
I did see that I had the old CFusionMX and a newer CFusionMX7
folder. I moved all my files from the CFusionMX folder to
CFusionMX7 folder using the same file structure for images. Nothing
else changed however when I launch the web pages I get red x marks.
I did update my site data to match the new folder locations. And
even duoble checked my image paths. Any Ideas ?

I did see that I had the old CFusionMX and a newer CFusionMX7
folder.
That could mean that you didn't completely uninstall the old
version of Coldfusion before installing MX7. You might have copied
old system settings that affect images or path. Alternatively,
there may still be places where you have to change
CFusionMX into
CFusionMX7.

Logic keeps asking for serial number after upgrade to 9.1.3

I know this has been asked before, but I'm wondering if there is a solution other than erasing my hard drive etc. I had to do a re-install of my system 10.5.8 and I upgraded to 9.1.3 and now Logic keeps asking for serial number after every shut down (not if I only quit). any ideas?
Thanks!

Thanks for your response. I had already re-installed my OS because computer wouldn't boot up. I had downloaded Onyx and run it which I think was the start of my problems including the missing serial number - so it was looking for serial number even before my upgrade to 9.1.3. I could not find anything called a reg keyfile in either my user or startup disk /Library/Preferences/. When I put in my serial number, I can boot and quit as many times as I want until I shut down.
Here are the 3 console messages that appear when I try to boot up and they are the same that come up after shutting down or on a launch which does NOT ask for serial number:
1/4/11 11:31:35 AM Console[149] Can't open input server /Library/InputManagers/LCC Scroll Enhancer Loader
1/4/11 11:31:52 AM Logic Pro[150] Can't open input server /Library/InputManagers/LCC Scroll Enhancer Loader
1/4/11 11:31:52 AM [0x0-0x1b01b].com.apple.logic.pro[150] ECMemReserve: allocating in MainStage mode
Any help is greatly appreciated!!!

Blurred low res images after upgrade, no export, READ DON'T UPGRADE

Hello, I am Pro photographer, I mainly have used iPhoto for family stuff. After upgrading from 09 to 11 ALL my images seem to be blured as if they were only the reference thumbnail. Trying to export the images to my Desktop to see what is going on iPhoto just hang and then crashes.
I've just lost nearly 10 years of family pictures? come on Apple this is like a early Alpha.

I have now upgraded three different machine with different iPhoto databases and have not had any issue with the clarity of the photos. I suspect that something happened to your photos during the conversion process.
I suggest you go back to your original iPhoto library and do a new conversion with iPhoto '11 to see if you get a better result as no one else has reported this issue.

Safari reopen after new start after upgrade to 10.8.5

After upgrading to 10.8.5 we got a few strange problems.
First strange thing is we bought 10.8.5 but still we get no support because the macbook pro is too old?
Ok, then I ask my questions here.
One of them for example is the reopening from the safari after booting up the computer.
We removed in the preferences everything about autostart programs.
Yet it still happens.
Also a problem is the popup windows "reopen windows when logging back in".
I found a lot on information from 2011 how you can turn this off in the preferences in general but in our 2013 10.8.5 Version there is no possibility anymore to remove a tick in preferences/general to turn this off.
What happens?
We do nothing and have to confirm this popup window (annoying) or have to wait 60 secs.
Or, we remove the tick and then we get error message after error message because every program in the Dock must be closed separately.
The next problem for example is the missing scroll bar.
It's almost not anymore possible to use the computer.
Never you know anymore if there is a 2nd page (for example in the applications where the half is now missing because they are on a 2nd page) and you can never navigate on a bigger document or webpage because you have to click first with the mouse in the page to move up and down with the arrow buttons from the keyboard and where is really a webpage with so much free space (without adds) to click "somewhere" without to activate "something"?
After a long time with hardware problems (new macbook pro had a damaged USB port from the beginning and we got in 2011 an old stock model from 2010 which makes problems with having to organise extensions later like RAM or so) and a few nasty problems with software (the 1 year old macbook pro was "tooold" to visit with per safari every webpage and the new safari was only to use for a newer OS. Solution was a Firefox Browser. First with 10.8.5 we got a functional Safari back) we thought we are now with 10.8.5 on the secure side and now we get such annoying problems.
The motivation to be a happy apple user starts to get smaller and smaller .......

After upgrading to 10.8.5 we got a few strange problems.
First strange thing is we bought 10.8.5 but still we get no support because the macbook pro is too old?
Ok, then I ask my questions here.
One of them for example is the reopening from the safari after booting up the computer.
We removed in the preferences everything about autostart programs.
Yet it still happens.
Also a problem is the popup windows "reopen windows when logging back in".
I found a lot on information from 2011 how you can turn this off in the preferences in general but in our 2013 10.8.5 Version there is no possibility anymore to remove a tick in preferences/general to turn this off.
What happens?
We do nothing and have to confirm this popup window (annoying) or have to wait 60 secs.
Or, we remove the tick and then we get error message after error message because every program in the Dock must be closed separately.
The next problem for example is the missing scroll bar.
It's almost not anymore possible to use the computer.
Never you know anymore if there is a 2nd page (for example in the applications where the half is now missing because they are on a 2nd page) and you can never navigate on a bigger document or webpage because you have to click first with the mouse in the page to move up and down with the arrow buttons from the keyboard and where is really a webpage with so much free space (without adds) to click "somewhere" without to activate "something"?
After a long time with hardware problems (new macbook pro had a damaged USB port from the beginning and we got in 2011 an old stock model from 2010 which makes problems with having to organise extensions later like RAM or so) and a few nasty problems with software (the 1 year old macbook pro was "tooold" to visit with per safari every webpage and the new safari was only to use for a newer OS. Solution was a Firefox Browser. First with 10.8.5 we got a functional Safari back) we thought we are now with 10.8.5 on the secure side and now we get such annoying problems.
The motivation to be a happy apple user starts to get smaller and smaller .......

Cannot create Site Collection in new Webapplication after upgrade to SP1

Hello,
after upgrading my SharePoint Server 2013 (small Farm with one SP and one SQL) I am not able to create new site collections in new web application. Furthermore I am facing trouble when creating a new web application which I suspect is a connected problem.
Environment:
SharePoint 2013 ENU with german language pack upgraded to SharePoint 2013 SP1. Both parts are upgraded (SharePoint and Language pack). Afterwards I have done a psconfigui to upgrade the DB which works fine. Only one DB (BDC is still running in compatibility
mode).
Everything is running on a single server on Windows Server 2012.
Problem(s)
When I create a new web application it tooks a very long time (3 + minutes) and ends with an error message (Sorry something went wrong !). If I close this message I can see the new web application and also its content DB. If I then try to add a new site
collection into this new web application it fails (Sorry something went wrong).
I suspect this is a connected error, but I have now idea what is going on. Everythings else seems to work...
Any idea or support would be great.
Thanks in advance
Martin

You can get issues if you hit a time out message during the creation process. How does it work if you create a site collection using PowerShell?
You can extend the timeout duration this is for web application creation but might be of use here too: http://blog.babunski.me/2013/07/17/sharepoint-404-error-while-creating-a-new-web-application/
Do you get any error messages when you create the site collection?

AP's keep on downloading new image after upgrading wlc

Similar Messages

Maybe you are looking for