AP Templates Misinformation?

I took the old wireless class just before the new wireless certifications came out. The instructor told me that when using AP templates, that the template values overwrite those on the AP. Therefore, he said that if I applied a template to an AP that had, for example, a blank SSID, that such blank values would override what was configured on the AP. In other words, pushing AP templates was a one way process, and that there was no check on the AP side to identify which values are 'new' and need to be changed. I'm asking this because I'd like to create an AP template that changes ONLY the AP VLAN Group from the 'default-group' and then apply it to a subset of APs. The problem is that I'm in a production environment, and I don't want to apply this change without a full understanding of what it's going to do. For the record, I think the instructor is mis-informed. Can someone please confirm?
Thanks,
Scott

Hello Scott
I certainly use the AP templates to change only one or two areas in the configuration our our AP.
For example, we have a fully configured working network that required AP's primary and secondary controllers changing. In order to do this I set up some AP templates and added in the controller details.
I wanted the AP's to only take on these new details.
This worked by ticking the tick box next to each field that I wanted to be applied to the AP.
So yes, I think you are right in thinking your instructor was mis-informed, at least on the code I am running. (WCS: 5.2.130.0 WLC:5.2.178.0)
In my experience, if the section of the template is not ticked, it does not get applied.
thanks
Bryn

Similar Messages

Send different different email templates to the approver for each level

Hi,
I have implemented 4 level sequential BPEL approval flow,
And I have 4 email templates corresponsding to each approval level.
Now, how to send these different email template upon reaching to different approval level.

Good afternoon tedkord,
Welcome to the forum! I’m sure you were very excited to get your hands on the Samsung Galaxy Note 4 after its release. It is disheartening to hear that your experience with the $200 gift card trade-in promotion may have gone so awry due to some misinformation.
It is true that a 2-year agreement or installment billing agreement is required to qualify for this promotion. Our associates and agents should have all of the necessary information available to provide our customers with accurate and transparent information. It certainly seems like this may not have occurred during your interactions. I apologize if this is not what you were advised when you inquired on multiple occasions in regards to your desire to purchase the phone at full retail price.
I am sorry if this was not the news you were hoping for when you reached out to us on the forum. I hope that in the future you will give us the opportunity to provide you with a better experience, and that this particular experience has not influenced your future shopping destination.
If you should have any questions, please let me know.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

And/or if statement in rtf templates.

Hi all,
I'm using XML Publisher 4.5.
I have created a word template file (rtf) for my reports. I need to be able to show some content in the template file by using and and/or if statement.
fx. <?if:doc_type='STANDARD'?> OR <?if:doc_type='DEFAULT'?>
How can I do this?
In advance thank you.
Best regards
Kenneth

Hi D,
Thank you for your answer.
I have seriously thought about that solution; but I don't think it's a smart way to do it.
If i do it like that, i need to copy the whole table and paste it inside the if statements.
I have two xml elements that I need to make the decisions on. POH_PO_TYPE & CP_RELEASE_NUM.
POH_PO_TYPE can be: STANDARD, RELEASE or BLANKET.
CP_RELEASE_NUM can be: '' or N
If POH_PO_TYPE is RELEASE AND CP_RELEASE_NUM is not ''
OR POH_PO_TYPE is STANDARD
OR POH_PO_TYPE is BLANKET AND CP_RELEASE_NUM is ''
THEN show table (which contains the whole PO).
It shall show the content of the PO in any of these cases.
BR Kenneth

How to round numbers in RTF templates?

Hello!
I'm using BI Publisher for Word (Oracle BI Publisher Builder for Word 10.1.3.4.1) to build a template to my BI Publisher report and I want to calculate this:
avg(X)/(avg(Y)-avg(Z)/0.9)
The result should be rounded to 3 places.
I tried:
<?(sum(X) div count(X)) div ((sum(Y) div count(Y)) - (sum(Z) div count(Z)) div 0.9)?>
and I obtained the expected result.
But, when I try to round in this way:
<?xdofx:round((sum(X) div count(X)) div ((sum(Y) div count(Y))-(sum(Z) div count(Z)) div 0.9),3)?>
I obtain 0 when is expected other value.
Can someone help me?

Hi ,
You can select the number format in RTF template .Double click the Form Field select
Type :Number
Number Format :#,##0.000
Thanks.

Relative path for images in RTF templates

Hi everybody!
When I insert an image in a RTF template, I put its path into the web dialog, in order to see correctly the picture when I open the report from the xmlp server, in this way: url:{"http://servername/analytics/res/Images/image.bmp"}
How can I make this path relative, in order to see the images even if the server name changes?
Thanks so!
Francesco

Hi Tim,
I am using BIP 10.1.3.3.2. I am able to access system variable CURRENT_SERVER URL.
Steps:
<?param@begin:CURRENT_SERVER_URL?>
<xsl:value-of select="$ CURRENT_SERVER_URL"/>
CURRENT_SERVER_URL is getting printed in BI Publisher. Value displayed is http://xx4697.xxx.co.in:9704/xmlpserver.
Now we are importing xsl into RTF template. File aaa.xsl is stored at [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app]
We have hardcoded the path for XSL in RTF. The path is <?import: http://xx4697.xxx.co.in:9704/aaa.xsl?>
As we want to set dynamic path we changed hardcoded xsl path to <?import: {$CURRENT_SERVER_URL}/../aaa.xsl?> but it is not working. Sometimes BIP is taking local path of MyDocuments folder and sometimes Desktop path. If I put that XSL file in MyDocuments folder or Desktop, it is working fine. But ideally it should refer [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app] path...
Thanks,
Amit D

Help with math / calculations in RTF templates

Greetings,
I know that there are math capabilities in the templates... I've seen the code samples in the Core Components guide.
What this doesn't tell you is WHERE these things would go in a template. And... that... is my question.
We are just starting to use BIP in conjunction with JDE EnterpriseOne (8.12, tool set 8.97.12). For our first attempt we're creating our template over a new report.
I have a template where I sum two different repeating values (through the normal BI Properties) and place these values in two separate cells in a table. I want to sum the two of these together for a "grand" total.
I've seen the "examples" but they really aren't very helpful. The xsfo, etc. for doing addition is fine, but WHAT are the values to add and WHERE does the code go?
If anyone has done something like this or has experience using the embedded code I would appreciate hearing from you.
Thanks in advance

I see what you are saying about the spaces... but it made no difference... still got the error.
The XML file is too large and convoluted to be pasted here.
With reqards to the following snippet:
COLA = <?sum(current-group()/COLA)?>
COLB = <?sum(current-group()/COLB)?>
Summ== <?sum(current-group()/COLA) + sum(current-group()/COLB)?>
Where does THIS code go?
Here is the error detail:
ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
Template: C:\Documents and Settings\jdenison\My Documents\BIP Templates\R5642001\R5642001_TEMPLsave.rtf
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\jdenison\My Documents\BIP Templates\R5642001\R5642001_RICE0001_D081029_T144059683.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:629)
     at RTF2PDF.runXDO(RTF2PDF.java:439)
     at RTF2PDF.main(RTF2PDF.java:289)
Caused by: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 15 more

Grouping and Decimal characters in rtf templates.

Hi guys and girls,
I’m really struggling with a problem here regarding the decimal characters for the prices in my output.
I'm using XML Publisher 5.6.3.
My goal is to control the grouping and decimal character from my template.
The numbers in the XML data file can either be 10.000,00 or 10,000.00. The format is handled by the users nls_numeric_characters profile option.
The output of the template shall be based on the locale and not the data generated by Oracle Reports. For example: Reports to US customers shall show the numbers in the following format 10,000.00. Reports to our European customers shall show the numbers in this format 10.000,00.
How can I achieve this in my templates? Can it be achieved at all?
Thank you in advance.
Kenneth Kristoffersen
Edited by: Kenneth_ on May 19, 2009 1:30 AM

Hi,
Thank you for your reply.
The problem is that the report is generating the output based on the users profile option nls_numeric_characters.
I have tried to override the users profile option in the before report trigger without any luck. I can alter selects so the query gets the numbers in the right format but then I would have to go through all queryes and reports which seem a bit wrong? Especially for the standard Oracle reports.
BR Kenneth

Resetting Header and Footer in RTF templates

Hi,
I developed an RTF template (template 1). This template contains start:body and end body for printing the header and footer in all pages. After printing this template then i have to call another template(template 2) from this. I called the template (template 2) using call statement. But the probelm is that the header and footer of template1 is printed in the output of template2 .
I dont want to print this header and footer for template 2. Can anyone please suggest me in doing this. I placed start:body and end body in the second template with the assumption that 1st template's header and footer will be overwritten. But if i preview then am getting the error
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\kpoda\Desktop\Invoice Printing Efficiencies\Sample XML Data\Sample Output4.xml
FOProcessor setLocale: en-us
each
Please sugget.
Thanks

Hi,
Do you have two templates (template1 & template2) that you want to display in the same document where the pages for template1 has one set of header and footers; and template2 has another set of header and footer?
If that is the case you can simply create a new section in your rtf template so you have section1 and section2.
In the body of section1 you call template1 and template2 in the body of section2.
You can then have different header and footers for the two templates in the same document.
BR Kenneth

Can we use IF statement in PDF templates

Hi,
I developed a PDF template. I need to underline ang bold the records based on a specific condition. Can we use IF conditon in PDF templates. Please suggest.
Thanks...

Billy Verreynne wrote:
The case syntax is a bit funny though as there's not a single condition evaluation (like a DECODE or case structs from some other languages).
This is what I would expect a typical case struct to look like - evaluating a single condition:
case <condition>
when <value-1> then return <result-1>
when <value-n> then return <result-n>
else
return <return-z>
end
?:| You mean like this...?
SQL> ed
Wrote file afiedt.buf
1 select empno, ename, deptno
2        ,case deptno
3           when 10 then 'This is Department 10'
4           when 20 then 'And department 20'
5           when 30 then 'And of course department 30'
6         else
7           'Blimey it is something else!'
8         end as dept_desc
9* from emp
SQL> /
     EMPNO ENAME          DEPTNO DEPT_DESC
      7369 SMITH              20 And department 20
      7499 ALLEN              30 And of course department 30
      7521 WARD               30 And of course department 30
      7566 JONES              20 And department 20
      7654 MARTIN             30 And of course department 30
      7698 BLAKE              30 And of course department 30
      7782 CLARK              10 This is Department 10
      7788 SCOTT              20 And department 20
      7839 KING               10 This is Department 10
      7844 TURNER             30 And of course department 30
      7876 ADAMS              20 And department 20
      7900 JAMES              30 And of course department 30
      7902 FORD               20 And department 20
      7934 MILLER             10 This is Department 10
14 rows selected.

Error: If statement in RTF template in BI Buplisher

All,
Can some help me to solve the below issue. Please find the code below one which is extracted from the water mark block in RTF template.
<?if:(sum(//g_data[fiscal_period=/asset/p_fiscal_period]/q2_op_plan_ytd))>0?><?( sum(//g_data[fiscal_period=/asset/p_fiscal_period and q1_task_top="Opex"]/q1_cost_plan_ytd) ) div
*(sum(//g_data[fiscal_period=/asset/p_fiscal_period]/q2_op_plan_ytd) ) ?><?end if?>*
I wanted to apply if condition to the code after the " div " as if I get any value for q2_op_plan_ytd as zero the it should replace with 1.
Please help me on this

Solution found.

Complex if statement in rtf template?

Hello,
I want to build an if statement in rtf template, the idea is like:
<?if:address!='' and phone!=''?>
<?end if?>
what's the correct way to do it if it is possible? Thanks in advance!
Shichao

stevencallan wrote:
Conditional statements, in the user guide or the report developer guide, depending on the version you use.
Page 7-62 in the 10.1.3.2 user guide:
Use an if statement to define a simple condition; for example, if a data field is a specific value.
1. Insert the following syntax to designate the beginning of the conditional area.
<?if:condition?>
2. Insert the following syntax at the end of the conditional area: <?end if?>.
For example, to set up the Payables Invoice Register to display invoices only when the Supplier name is "Company A", insert the syntax <?if:VENDOR_NAME='COMPANYA'?> before the Supplier field on the template.
Enter the <?end if?> tag after the invoices table.Thanks for the reply. But what about two conditions in one if statement? That was my question. :)
Shichao

SharePoint Foundation 2013 - Wiki Page Template

Hi there,
is there a way to have templates for Wiki pages with SharePoint 2013 Foundation? We have a specific layout and want to have it on every new wiki page.
Thank you!

Hi
pls check this
http://mosshowto.blogspot.in/2011/11/custom-template-wiki-foundation_01.html
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ae453550-8503-4531-b4cf-50a4d157e36c/is-it-possible-to-create-wiki-page-templates-with-sharepoint-2010-foundation?forum=sharepointcustomizationprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

Template Builder (XML Publisher Report) for Open Office

Hi,
Do any body has any idea, if can have template builder for Open Office also, My company has un installed MS Office from my machine, and they dont have license now.
Thanks and Regards,
Nidhi Gupta

Hi All,
I think Oracle can provide a BI Publisher Software for the Open Office, since the licencing cost for MS Office is very high.
"OpenOffice Writer" is a open source alternative to MS Word and can be used on Linux. If I am using Linux OS and have to work on BI Publisher templates then certainly I will have to install Windows or use WINE ( I donno how it works but heard of it)
Other Oracle tools such as SQL Developer, etc are platform independent.. then why only BI Publisher is limited for windows/MS Office.
Tim,
Can you please answer..
I think it should integrate with OpenOffice too!!
Regards,
- Ejaz
[email protected]

How to call a rtf template from another rtf template by passing a value

Hi Gurus,
Its about calling a rtf template from another rtf template by passing a value.
My requirement is like:
I got a quote report from Siebel, based on the product PartNumber I need to pull product description or literature from another database database.
My approach is something like; get a partnumber from quote report pass it to another rtf template which uses the partnumber and get the data from table using DataSource. When user pull a quote report from siebel this new rtf template should attach to the quote at the end.
I've gone through all available blogs about sub-reports and white papers from Oracle they are not much helpful since I need step-by-step.
http://www.adivaconsulting.com/adiva-blog/item/36-working-with-rtf-sub-templates.html
bip-subtemplate-1-132933.pdf
I'm using 10g obiee integrated with Siebel.
Just started learning BIP.
Thanks in advance.
Edited by: 911927 on Apr 2, 2013 8:56 AM
Edited by: 911927 on Apr 2, 2013 8:57 AM

How to call a rtf template from another rtf template by passing a value try in main template create hyperlink of url with parameters for another template
http://bipconsulting.blogspot.ru/2010/02/drill-down-to-detail-or-another-report.html
When user pull a quote report from siebel this new rtf template should attach to the quote at the end.it'll be only another report
IMHO you can not attach it to main. it'll be second independent report
you can try subtemplate but it's not about rtf from rtf by click
it's about call automatically rtf subtemplate from main rtf based on some conditions
for example, main template contain some data and if some condition is true then call subtemplate and place it instead of its condition

Using a SQL data source and XML data source in the same template

I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
Rhonda

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

AP Templates Misinformation?

Similar Messages

Maybe you are looking for