AP-to-LWAPP-Upgrade-Tool won't install

I have downloaded 3 versions, 3.0, 3.2 and 3.4.... all of them hang after extracting the files and launching setup.exe....
I have tried on several different Win XP machines... same result
Don't know if it matters at this point, but the intended WAP is an AIR-AP1252G-A-K9...
any ideas?

You can't use the tool for that:
Here is direction from a member on this forum:
It took me a while to get this information, so thought I'd share. Here it is:
You cannot use the upgrade tool to do the IOS to LWAPP for the 1250 APs.
Here is a method to do the conversion.
*Method 1 : ( Mode Button )*
1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.3) to the tftp server (your laptop or pc).
3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com or
http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4(10b)JA3&fileId=271159&treeMdfId=278875243&treeName=Wireless
4. Rename c1250-rcvk9w8-tar.124-10b.JA3 to c1250-rcvk9w8-tar.default
5. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
6. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
7. Hold the mode button and power off the AP.
8. Power back the AP while continually holding the mode button for 20-30
seconds.
*Method 2 : ( Archive Command )*
1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.3) to the tftp server (your laptop or pc).
3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com or
http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4(10b)JA3&fileId=271159&treeMdfId=278875243&treeName=Wireless
4. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
5. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
6. On AP, type archive download-sw /overwrite /force-reload tftp:///c1250-rcvk9w8-tar.124-10b.JA3
Going the other way (lwapp to autonomous)
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
If you need to manually "prime" the LWAPP:
AP#lwapp ap ip address
AP#lwapp ap ip default-gateway
AP#lwapp ap controller ip address
AP#lwapp ap hostname
(optional)
Hope someone finds this useful!

Similar Messages

LWAPP upgrade tool and Windows 7 (64 bit)

I know this tool does not have a version for windows 7 but the company foisted the OS off on me to "Test" It works fine with windows 7 32 bit but I have windows 7 64 bit.
So, I was attempting to install and use the autonomous to LWAPP tool to upgrade an 1131 AP to LWAPP. I DL'ed version 3.4 which is the most current I could find. unfortunately, it gives me an error installing saying it could not read from the IPUT file and after installation it is convinced I already have a TFTP server running, which I do not. In addition to all that, when attempting to Uninstall the tool it says _SETUP.DLL is missing.
With that information in hand I found the _SETUP.DLL on another machine I use and copied it over which resulted in no improvements of note. I did register the dll as well. Any ideas?

I assume you are using the RTM (Release To Manufacturing) version. I would suggest, if possible, you might want to use the new XP Virtual PC feature (run XP on Windows 7), if the version of Windows 7 you are running supports it. I think the VM runs XP SP3 32-bit.
http://www.microsoft.com/windows/virtual-pc/download.aspx
You could also try changing the advance properties of the executable and indicate that it should be run in "compatability mode" of Windows XP 32-bit (I think that's an option, but my Windows 7 computer is at home)
Whatever route you take, you will receive no support from Cisco in this configuration. If you can avoid it, it might be better to not do LWAPP upgrades with Windows 7 until something official comes out.
petenugent - please be aware that Windows 7 was released to many people on August 6th. The general public release (of the exact same media) is due on October 22.
http://windowsteamblog.com/blogs/windows7/archive/2009/07/21/when-will-you-get-windows-7-rtm.aspx

RSAT Tools won't install (the update is not applicable to your computer) in build 9926

Trying to install Remote Server Administration Tools in Windows 10 Technical Preview build 9926
Downloaded WindowsTH-KB2693643-x64.msu
Gives error "the update is not applicable to your computer"

Hi SeanSauve,
The below is the information I quoted from the system requirements part on the download page:
Supported Operating System
Windows 10 , Windows 10 Tech Preview , Windows 8.1
**Remote Server Administration Tools for Windows 10 Technical Preview can be installed ONLY on computers that are running the second release of Windows 10 Technical Preview.** Remote Server Administration Tools cannot be installed on Windows
RT, computers with an Advanced RISC Machine (ARM) architecture, or other system-on-chip devices.
Remote Server Administration Tools for Windows 10 Technical Preview runs on both x86- and x64-based editions of builds 9926 and later releases of Windows 10 Technical Preview, including all updates. This release does not run on Windows 10 Technical
Preview builds that are older than 9926. Download and install the version that matches the architecture of the computer on which you plan to install the administration tools. If you are not sure whether your computer is x86- or x64-based, see
How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Remote Server Administration Tools for Windows 10 Technical Preview is available only in United States English (en-US) for this release.
IMPORTANT: Remove all older versions of Administration Tools Pack or Remote Server Administration Tools—including older prerelease versions, and releases of the tools for different languages or locales—from the computer before you install Remote
Server Administration Tools for Windows 10 Technical Preview. Only one copy at a time of Remote Server Administration Tools can be installed on a computer. If you have upgraded to Windows 10 Technical Preview from an older release of Windows, you will need
to install Remote Server Administration Tools for Windows 10 Technical Preview on the computer; no earlier releases of Remote Server Administration Tools are still installed on a computer that you have upgraded to Windows 10 Technical Preview.
Remote Server Administration Tools for Windows 10 Technical Preview includes support for remote management of computers that are running the Server Core installation option or the Minimal Server Graphical Interface configuration of Windows Server Technical
Preview. However, Remote Server Administration Tools for Windows 10 Technical Preview cannot be installed on any releases or installation options of the Windows Server operating system.
Earlier releases of Remote Server Administration Tools (such as those for Windows 8.1) are not available--nor do they run--on Windows 10 Technical Preview.
Server Manager is included with Remote Server Administration Tools for Windows 10 Technical Preview; GUI-based tools that are part of this release of Remote Server Administration Tools can be opened by using commands on the Tools menu of the Server Manager
console. To use Server Manager to access and manage remote servers that are running Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2, you must install several updates on the older operating systems. For more information
about requirements for using Server Manager to manage remote servers, see
Manage multiple, remote servers with Server Manager.
More information, see:
Remote Server Administration Tools for Windows 10 Technical Preview (January 2015)
Please check and see if your current build is Windows 10 build 9926, and the system language, RSAT should not be able to install on the other language versions of Windows 10 other than EN-US.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

Autonomous - LWAPP Upgrade Tool & Vista

I tried to install the v. 3.4 upgrade tool on Vista Business 64 bit. The installation fails with a pop-up titled "Severe" with error "Error in opening iput file."
The real problem I'm having is that I can't uninstall the failed installation. It shows up in the installed programs list, but upon uninstalling pops up with "Setup Initialization Error" "Setup is unable to find _SETUP.DLL, which is needed to complete the installation. Error 103."
Any advice on how I can excise this thing out of my system?

Unfortunately that didn't do the trick. I did look at the uninstall.bat file and tried running the isuninst command manually with the same options and compatibility mode, but it just immediately exists without doing anything.

CS3 Design Premium upgrade. Won't install DW... ???

I had CS2 installed on my MacBook... I purchased CS3 Design Premium upgrade, and tried to install. I had DLd the Dreamweaver CS3 demo awhile ago, and deleted it after the trial was over. Now, when installing CS3, the installer says Dreamweaver is already installed? And won't let me install! DW is not installed, and I've tried deleting every file I could find that mentions DW but no luck. Anyone have any ideas??? Thanks!

Activation is a process that Adobe has created to allow its programs to
continue to operate after installation. It is supposed to protect them
from piracy. You can install most Adobe programs on multiple computers,
but have them activated on at most two at a time. It is recommended to
deactivate the programs before messing with the clean script so that you
do no use up your activations unnecessarily.
You can find the Clean script here:
Mike

Designjet 70 maintenance tool won't install on Windows 7 64 bit machine

I recently got a new computer running Windows 7 Pro. It seems that the Designjet 70 maintenance tool will not install to allow me to do any diagnostic testing. Appears that the printheads need aligning.
Installation seems to go fine until it hangs up with this message. Printer is connected and on is printing (streaked) images.
on top of

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - Designjet & Large Format. Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OS X 10.4.7 Admin Tool Won't Installing

I recently bought an Intel iMac and tried downloading and installing 10.4.7 Server Admin Tools on it but evertime I go through the process it keeps coming back saying it could not be installed for 'some unknown reason'. I'm running Leopard on the iMac but need to run Admin Tools communicating with my server running Tiger. Is there a conflict here that Leopard won't run any app designed for Tiger? I wouldn't think so as how can I install Leopard Admin Tools when my server is running OS X Server 10.4.10?

Here is the exact thread if any one still has problems:
'Download the Server Admin Tools 10.4.7 and open the disk image file. Go to the folder Administration Tools/Installers/Packages and select ServerAdminTools.pkg. Control click on the .pkg and select "Show Package Contents." You will see inside Contents folder "Archive.pax.gz." Drag the file to your desktop and double click to decompress it (Mac will do it automatically). Once it's been open you will see an Archive folder and inside you will see an Applications folder where all the 10.4.7 Admin Tools are. Just drag the tools to your Applications folder and your done.'
I cam confirm that OS X 10.4.7 Amin Tools are now working perfectly on my Leopard OS.

Pro Tools won't install. Startup disk full-not true.

I'm trying to install Pro Tools 10.2 on a Mac Book Pro OS X 10.7.4. I'm doing a clean install, but the installation won't complete. It bogs down half way through. I finally have to force quit the installer because it says my startup disk is full. This is not true because I have 500 gig of memory left on my drive. My trash is empty. I don't know what to do.

You seem to know that an Intel Mac requires a drive formatted with a GUID partition table to boot from it, so that much of your scheme should work, even if you are formatting the drive from 10.4.4 via Target Disk Mode with a PPC Mac, as long as you are using a version of Disk Utility that offers the GUID partition table formatting option (in the Partition tab, in the "Options..." drop down sheet.)
However, it isn't clear if you are then trying to install the OS onto the Intel iMac while still in Target Disk Mode, or which installer you are using. As already explained, you can't install an Intel version of the OS from a PPC Mac while in TDM -- as far as the installer knows, the target is just a drive attached to the PPC Mac, so it will inform you that the Intel OS version can't be used with that Mac.
So, the solution is to make sure the drive is formatted with the GUID table & then install the OS onto the Intel iMac while booting it from the iMac's own installer disk. If necessary, you can access the installer's version of Disk Utility before you begin the installation by selecting it from the "Utilities" menu & checking or reformatting the drive before the install.
This should work fine, unless for some reason you cannot boot the iMac from its original installer disk. If that is the case, please let us know.

Access Connections and Tools won't install properly

I have followed advice uninstalled the wireless driver, access connections, hotkey, power manager. . Reinstalled all ( latest versions) except access connection. Wireless connections work correctly and all hot keys function appropriately ( including Fn +F5 ). Then I let TVSU download Access connections. An icon is placed in the task tray. Clicking on it nothing happens. Also none of the hot keys work including the blue ThinkVantage key. Once I uninstall Access connection I am back in business with the wireless connection and the hot keys working. ( for all these installs I turned off the Microsoft virus scanner and the firewall).
Have similar problem with ThinkVantage tools in that I get the Icon in the task tray and then the program freezes. No problem in reinstalling PC doctor5
T60 series2007 Windows XP professional pack3.

Hi dulverton,
I find lenovo drivers and software rather eccentric; since they need to be installed in a particular order to work properly.
First uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
Further this is the order in which the following drivers must be installed for each of them to function desirably:-
1) Lenovo PM driver
2) Lenovo System Interface Driver
3) Hotkey driver
4) Wireless driver software [reboot]
5) Access Connections [reboot]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Designjet 70 maintenance tool won't install and Windows 7 64 bit machine

Downloaded maintenance software from HP and it seems to have installed.
Sorry for the previous message.

Hello @RicoBall,
Welcome to the HP Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the HP Designjet 70 is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

After installed iPhoto upgrader tool, photos software is still asking for IPhoto needs to be update, why?

MAC OSX :- 10.10.3
IPHOTO :- 9.6
I have recently updated my os x 10.10.2 to 10.10.3 and found iPhoto software dose'nt work. there is some other application appears called photos like iPhone,when i am trying to open it, asking to marge iPhoto library. so tried to marge but it is asking to upgrade iPhoto through a iPhoto Library Upgrader tool. i have installed that but problem is still there - needs to upgrade your iPhoto library. why?

You need to upgrade the application not the Library. 10.10.3 requires v9.6.1
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
 Cheers, Tom

Have photoshop 6 on a dead pc laptop with windows XP. Have a pc laptop that has been upgraded from Vista 64 bit (where photshop wouldn't install) to windows 7 professional 32 bit (clean install). Photoshop still won't install. Also having reinstallation

I have photoshop 6 on a dead pc laptop with windows XP. Have a pc laptop that has been upgraded from Vista 64 bit (where phootshop 6 wouldn't install) to windows 7 professional 32 bit (clean install). Photoshop still won't install. Also having reinstallation issues with pse6 on this same pc. Pse6 was installed and working on vista 64bit version of the OS, now won't install on rebuilt windows professional 7 32bit (keeps giving me serial number not valid errors). I'm not trying to pirate these programs. Just want to reinstall them.

you need,
Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

Google tool bar won't install on Mac OS 10.4.11

Mac OS 10.4.11. Was using earlier Firefox then installed 3.6.8 and now many add-ons won't work but mostly I need Google tool bar which won't install. Also no autofill.

Jeff, there was nothing under logs/Adobe/installers. Instead, I had to scroll through "All reports" and find the log there. Under Adobe, I only found Reader updater and the CC Cleaner protocoll:
The protocoll for the installation attempt looks like this:
28.10.14 08:15:11,503 DiskImages UI Agent[2354]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
28.10.14 08:15:11,000 kernel[0]: hfs: summary table not allowed on FS with block size of 2048
28.10.14 08:15:11,000 kernel[0]: hfs: could not initialize summary table for CS6 MstrColl
28.10.14 08:15:11,000 kernel[0]: hfs: mounted CS6 MstrColl on device disk1s2
28.10.14 08:15:11,571 mds[81]: (Normal) Volume: volume:0x7ff9a7027000 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/CS6 MstrColl
28.10.14 08:15:12,781 DiskImages UI Agent[2354]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
28.10.14 08:15:21,000 kernel[0]: hfs: mounted DWA on device disk2s2
28.10.14 08:15:24,000 kernel[0]: hfs: unmount initiated on DWA on device disk2s2
28.10.14 08:15:24,000 kernel[0]: hfs: mounted LWA on device disk2s2
28.10.14 08:15:28,000 kernel[0]: hfs: unmount initiated on LWA on device disk2s2
28.10.14 08:18:45,940 com.apple.appkit.xpc.openAndSavePanelService[2420]: Bogus event received by listener connection:
<error: 0x7fff7b11fb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7b11fe60> { length = 18, contents = "Connection invalid" }
28.10.14 08:18:53,796 com.apple.appkit.xpc.openAndSavePanelService[2420]: CGSGetWindowTransformAtPlacement
28.10.14 08:18:53,796 com.apple.appkit.xpc.openAndSavePanelService[2420]: CGSTranslatePointForWindow
So I'm still at a loss. Is there another element I need to open the application in 10.9?

HT5037 The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.

The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.

Your Library is damaged.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
As for goign back: do you have an undamaged library?
Regards
TD

AP-to-LWAPP-Upgrade-Tool won't install

Similar Messages

Maybe you are looking for