AP with Clean-air Express and 3650 controller

Hi,
Is Clean-air express supported on the 3650 wireless controller with 1602e APs? The Clean-air options on the controller are available but do not seem to be active. In the controller gui the Clean-air admin status is disabled and the Clean-air operation status is down. I did confirm the Clean Air option is enabled on the config menu for the b/g/n band. Am I missing something here or are these AP's just not supported? Thanks!

CleanAir Express is different than CleanAir. Express means that the AP does the function of detection, not the controller. 1600's & 1700's run CleanAir Express and you don't have the 100% functionality of CleanAir with these access points.
-Scott

Similar Messages

Clean Air Express

Hello)
I have the question and I didnt find good explanation about it((( So I have Cisco 1602 which supports Clean Air Express. Does it change the channel when detect interferrer? Or not? On cisco.com it just says "makes adjustments to optimize coverage"((( Please clarify what does it mean?

When I say 'is done on software", the analysis of the interference is done on software. Unlike the other models, this stage is done with a dedicated hardware, thereby leaving the APs CPU with more space to do other stuff.
With CleanAir being done on software, this process is slower in some cases as the CPU has to share resources with other processes.
Go to Wireless > 802.11a > CleanAir and see if CleanAir is enabled globally.

Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router)

Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router?
I'm using a tp link router and sometimes it takes a long time delay for my 2 mac computers to connect each other. I don't know this is because of the router compability or the computers.

Anyone knows?

Mac mini (2014) wont sync notes and ibooks with ipad air 2 and iphone, photos ok

MAc mini (2014) will not sync notes or ibooks with ipad air 2 and iphone 5s, photos are ok, any ideas please?

Syncing Notes on iPhone, iPad, and iPod touch - Apple Support
You have to use iCloud for the Notes. Books can be synced via iTunes.

Compatibility issues with Final Cut Express and Final Cut Pro

I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
If I transfer project files from one platform to the other will i run into any issues?
Thanks for all and any help.

{quote:title=cuttingedge wrote:}
If I transfer project files from one platform to the other will i run into any issues?
{quote}
Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

Unable to connect with Kuler Air app and Extension

Hi,
I am unable to connect Adobe Kuler Desktop(Air app). I can't login through the app. Only thing I can see when I launch the app is the RGB rotating, even after an hour.
I tried reinstalling the app two three time. No way. same issue persits.
I tried to connect through a proxy server enable and through a direct connection. same issue.
Not only the Kuler Desktop, but the plugin also has the same problem.
Please help.

Hello, I was getting the same RGB loading... issue, however I was able to Sign In at the bottom with my Adobe ID, and then themes started loading when I selected from the dropdown (e.g., Most Popular). It's a little slow, but seems to be working.

Still big problem with "Adobe AIR 16" and "Adobe AIR 17"

Device:Iphone 6 e Iphone 6 plus
My application xml:
    <fullScreen>true</fullScreen>
    <aspectRatio>landscape</aspectRatio>
    <renderMode>cpu</renderMode>
    <autoOrients>false</autoOrients></initialWindow
When I use "cameraRoll.browseForImage ();" and the user clicks on the "Cancel" the keyboard becomes vertical and status bar trasparent. Unable to use the app.
Adobe is not the same as a few years ago, instead of solving the problems they create.
With "Adobe AIR 15" works but I can not publish the app on Apple Store (OS64 bit).
HelpMeeeeeeeee

Device:Iphone 6 e Iphone 6 plus
My application xml:
    <fullScreen>true</fullScreen>
    <aspectRatio>landscape</aspectRatio>
    <renderMode>cpu</renderMode>
    <autoOrients>false</autoOrients></initialWindow
When I use "cameraRoll.browseForImage ();" and the user clicks on the "Cancel" the keyboard becomes vertical and status bar trasparent. Unable to use the app.
Adobe is not the same as a few years ago, instead of solving the problems they create.
With "Adobe AIR 15" works but I can not publish the app on Apple Store (OS64 bit).
HelpMeeeeeeeee

Xcode With MacBook Air 11 and 4 ram will work well ?

Hello Guys ,
I thought to buy MacBook Air 11 and 4gb ram , So i just wanted to ask , he will work good for Development ? Without problems ?

dominic23 wrote:
MacBook Air 13-inch with 8GB RAM will be a better choice.
That statement means nothing without some argumentation. How much does Xcode need RAM? How big codebase works well with 4GB? Have you actually EVER ran out of memory with 4GB usign Xcode?
8GB is better, of course. But if everything can be done with 4GB then it is better to save the money.
I have used MBA 2011/2GB and it worked flawlessly in normal desktop usage (Safari, Terminal, Email etc...). Didn't try with Xcode, though.

Garageband with Digimax Presonus Preamps and Ensoniq Controller - Good?

I guess people got tired of answering my other thread .. I just need a couple of more answers to my small studio setup questions ..
I have 2 Digimax 8 channel Presonus preamps each with their own power supply .....
And an Ensoniq 16 channel controller .... will all this work with GarageBand or Logic Express?
Is the controller a weak point?
I'm leaning towards Getting a dual core intel iMac and an external firewire drive ..
Should I record, mix and edit on the iMac and archive unto the external drive and also make dvd backups?
I'll probably be doing some other things on the iMac ... surfing net, email etc ... nothing too heavy ...
Thanks ....

That sounds like an excellent setup to me (I'm another FirePod user and love it).
As for the iControl, all it does is replace mouse and keyboard controls, so you definitely do not need it. I imagine it would be nice to have, but if it's not in the budget, it doesn't really do anything you can't do with your mouse/keyboard (it does have a MIDI port, though, so you could plug a MIDI controller into it)
--HangTime [Will Compute for Food] B-|>

Extend wireless network with multiple airport express and netgear powerline

I currently have the following network configuration:
1. Using ATT u-verse (2-wire 3800HGV-B "modem") to internet
2. Disabled the u-verse modem wireless router, and have connected an Apple Time Capsule wireless router (on a DMZ)
3. Have four Netgear XAVB5001 powerline adapters connected to the time capsule (for our iMac desktops and the Apple TV)
4. Have an Airport Express wirelessly connected to the time capsule to extend range (for our iPhones and iPad)
All this is currently working. What I would like to do is the following, keeping 1-3 above the same:
4. Connect the airport express to the time capsule via Netgear XAVB5101 powerline adapter (instead of wirelessly connecting to the time capsule as it is today) and use it to extend the wireless range of the time capsule
5. Add ANOTHER airport express to the time capsule via powerline adapter (and extend the wireless range elsewhere in the house).
Does anyone have any experience with this kind of setup and can assure that it would work? (I'm trying to decide whether to spring for a couple more powerline adapters and another airport express)
Thanks in advance!
Dave

I had a VERY similar problem: I was trying to extend my wireless network using a hardwired ethernet connection from Airport Extreme to my Time Capsule. Every time I plugged in the wire to the TC, everything disappeared. Unplugged, and boom. Came back.
Here's how I solved it:
Go into Airport Utility and select the unit you are trying to use as a wireless extender and choose to edit it. Then, on the wireless tab select CREATE a wireless network. But, give it the exact same name and password. This is completely counter-intuitive. You would think to choose EXTEND, but this would be wrong. Next choose the network tab. And, select Router mode to Bridge (off).
By choosing the same name and password, your phone, laptop, etc. will think it's on the same network and move seamlessly from one to the other.
See if this fixes your issue. Fixed mine instantly. AND, it only took 3 painstaking hours of checking ethernet connections and rewiring jacks, etc. to figure it out. LOL

Problem with Clean Access Agent and Windows Updater

I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!

Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Extending my network. Time Capsule-Air Express and Extreme.

So currently my network is a time capsule in my basement and an airport express upstairs behind a tv in my living room. I have an extreme that I'd like to use to boost my signal in the back yard where I use the remote app on my iphone to control itunes. They are all 802.11n(?). I would like to place the extreme close to a basement window that has clear sight to the lower back yard area.
What is the easiest way to go about setting this up?
THX

Welcome to the discussions!
+What is the easiest way to go about setting this up?+
Assuming that your AirPort Extreme is the 802.11n version, (it has a square shape), here is how to setup the "extend" configuration with the Time Capsule. The AirPort Extreme must be positioned where it can receive a good signal from the Time Capsule.
I was not clear on whether you already had the AirPort Express setup to extend (you must have an 802.11n version of the Express to allow this), or whether you have it configured to "join" your wireless network for use with AirTunes.
_On the Time Capsule_
Open AirPort Utility
Click Manual Setup
Click the Wireless tab below the row of icons
Make sure that you have a check mark next to "Allow this network to be extended"
Make note of the exact Security setting that you are using
Update to save any changes
The Time Capsule will restart and you should see a green light in 15-20 seconds
_On the AirPort Extreme_
Open AirPort Utility
Click Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Extend a wireless network (If you do not see this choice, hold down the option key on your computer as you click on the selection box)
Wireless Network Name = Exact name of your Time Capsule wireless network. (This should appear as a choice in the setup)
Enter a check mark next to Allow wireless clients
Wireless Security = Exact same setting as your Time Capsule wireless network
Wireless Network Password = Exact same password as your Time Capsule wireless network
Verify Password as above
Update to save changes
The AirPort Extreme will restart and you should get a green light in 15-20 seconds.

Will I be able to use my printer which is not wireless with the airport express and will it become a wireless printer ?

I have a wired printer and I need to know will the airport express work with this printer and will I be able to print wirelessly from my IPad ?

Can't print from iPad unless it's AirPrint able...
If it isn't you may want to check out Printopia.

Logic 7.2 with HD3 Accel Express and PT 7

I just upgraded my system and I'm having trouble getting everything working when using Logic with TDM. The TDM setup guide is pretty sketchey. Anybody out there who can give me some instructions?
I had audio playing out of the interfaces for a while, but not it says that core audio is being used by another program (nothing else is running) and Logic never takes control of the interfaces and the digital light keeps flashing.
I want to set it up so that I can use the native Logic instruments with DAE. That means that I have to set up two mixers so that core audio can enter the TDM mixer. I've been two days on this and I just can't seem to get it figured out. I'm not a total dummy. Pro Tools is working perfectly, as are Reason and Digital Performer. All of my RTAS instruments are working in Pro Tools as well.
Anyone?
Thanks in advance.
Steve

Hi again Steven.
Point is; The Direct TDM (DTDM) driver will function as the Core Audio driver, except for inputs. Audiotracks, instruments and busses using DTDM will run all Logic plugs and AU-plugs that the AU-manager has accepted at Logic startup. On the busses, you can put SpaceDesigner and other "shared" FX, and access them by using Sends from the DTDM audiotracks.
I do not see the reason for using Core Audio before you need additional inputs from a non-TDM interface when recording (refer to Logic Pro 7 TDM Guide on stability when using more than 2 audiodrivers). There's just a few limitations using DTDM compared to Core Audio (see manual p. 36).
I don't use Reason or DP, so I won't speak for those app's.
7thson mentioned a method of picking up the computers SPDIF output and put it into the Digi's input. I used that myself before I got ESB, and it's just fine - except you got only 1 stereo pair, and you'll ned to clean up all system sounds and other sources routed to that output. With ESB, you got 4 stereo pairs that can be treated separately.
If you don't got any sound out of the Digi-interface yet, check that you got some TDM audio tracks, and a TDM stereo output pair (Environment). Next step to get Logic's native machinery into the TDM-mixer: A DTDM-track must be outputted using the ESB in the output block. Then you need to change a pair of AUX-tracks from Core Audio to TDM - setting the ESB in the input block and the desired (preferably Output 1-2) TDM output in the output block. This is quite good described at p. 5 in the Logic Pro 7 TDM Guide. You say that ProTools is working, so the interface setup should be OK.
You can just change some excisting tracks in the native audio layer of your Environment - instead of making a separate TDMmixer-layer. It's easier to see whats going on if all audio-related are in the same layer.

Printing problem with Macbook, Airport Express and new Canon IP4600

Just set up new printer, a Canon ip4600. Adding printer in System Preferences to my flat-screen iMac, I got it working using the Airport Express. But trying the same thing with the Macbook (2.4 GHz Intel), can't get it to print. (Both worked fine with previous Epson printer.) I fear it's a network issue, not sure what to do. Any suggestions will be appreciated.

For each of the AirPort Express Base Stations (AX), did you also change the "iTunes Speaker Name" on the Music tab when using the AirPort Admin Utility? Is this the name you're referring to from iTunes?

AP with Clean-air Express and 3650 controller

Similar Messages

Maybe you are looking for