AP1131 supported radios in vWLC version 7.3.112

Hi I was migrating AP1131 from existing to new vWLC. All APs and access are working fine. Something that confuse me about the supported radio. we have 2 type of APs. 1. AIR-LAP1131AG-A-K9 2. AIR-LAP1131AG-N-K9 During the setup and for a week after migration, we can see the 80211.a/n radio is down for AIR-LAP1131AG-A-K9. however 802.11.b/g/n is up. but today, we can see both 80211.a/n and 802.11.b/g/n without any changes made. If someone care to explain and share me the link for me to understand better between 2 version of hardwares. Thanks in advance.

AIR-LAP1131AG-A-K9 and AIR-LAP1131AG-N-K9 are Cisco Aironet 1130AG IEEE 802.11 A/B/G Access Points, the only difference lies is the Regulatory Domains!!
AIR-LAP1131AG-x-K9 , where x represents the Regulatory Domain
Here, in AIR-LAP1131AG-A-K9, A represents : FCC and in AIR-LAP1131AG-N-K9, N: North America (Excluding FCC)
Here are others
• C = China
• E = ETSI
• I = Israel
• J = TELEC (Japan)
• K = Korea
• P = Japan2
• S = Singapore
• T = Taiwan
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country please visit: http://www.cisco.com/go/aironet/compliance

Similar Messages

Attempted repair of 3.5.1 database yields message that it may "...remove data supported only in newer versions..."

After starting Aperture with Command+Option keys, and being presented Photo Library First Aid, then choosing Repair Database radio button, then clicking on Repair --- I am presented with a dailogue:
"This library has been opened with a newer version of Aperture.
Repairing the library using this version of Aperture may remove data supported only in newer versions of Aperture."
This does not add up, as I am running 3.5.1, which is the newest version.
So, I am concerned about running the repair.
Thoughts?
Richard

Richard, I am seeing the same. For some libraries Aperture seems to be confused about the version:
My Aperture version is 3.5.1, the library is version 3.5.1, but still I am getting this message when trying to repair, even after repeated repairs.
The repair does not seem to cause any harm, however, but I cannot recommend it as safe, as long as we do not know, what is causing this.
I am seeing this only for libraries, that have been opened by the latest iPhoto 9.5.1. Is that the same for your Aperture libraries?
-- Léonie
Added: Repeated "Repair" does not help, but after one "rebuild", the version number will revert to normal and stick, and the warning is gone. But don't try to "rebuild" without first updating your backup of the Aperture library.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.

Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using.

I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?

Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

Oracle Business Intelligence is not supported on this Windows version

Hi Guys,
I uninstalled OBIEE 10.1.3.4.1 and OBIA 7.9.6.1 and after that i did disk cleanup from Start->Accessories->System Tools-> Disk Cleanup.
And after that when i tried to Install OBIEE 10.1.3.4.1 i got the following error.
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But my machine is Windows XP x86 and I have installed OBIEE. I was surprised when i saw this error.
In Run-> CMD when I type Systeminfo i get the following error.
Loading Network Card Information...
ERROR: Provider Load Failure.
I would appreciate if any one of you can let me know what could be the problem.
Thanks a lot!
Edited by: user10511107 on Mar 14, 2010 9:22 PM

Hi Daan,
I belive we all shoud consider http://forums.oracle.com/forums/ann.jspa?annID=939
I get upset to see people on this forum who answer the questions like *'use google'* or *'let me google it for you'* or *'use this forum filter'*
I belive it is better to help them answer a better question or if you don't like the question ignore it.
Hi user10511107,
I belive your problem is with Windows not with BI, BI just can't get windows version,
If you are on right version of windows go to MSDN and search for your error and how to fix it
ERROR: Provider Load Failure.
Regards
Nicolae

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

JVM Loader Error: Unable to find supported JDK or JRE version

Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
Manju

Hi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.

CUPC supported on 64-bit version of Windows 7?

Hi there,
anybody knows when we can expect CUPC to be supported on 64-bit version of Windows 7 platform?
Regards,
Tenaro

CUPC 8 is already supported in 64-bit versions of Windows 7, but will not run natively in 64-bit until quarter 3 of 2011. See this table from Cisco.

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Does iOS 7 Support Apps for Older Versions of iOS?

Does iOS 7 support apps for older versions of iOS? This is my first big iOS upgrade so I wanted to be sure about this.

Which is why I said "should" rather than "will". As there are no absolutes, I'm pretty sure there will be an app somewhere that will not run or have issues until its updated to the new iOS.
With that said for the most part there "should" be no issues updating to a new iOS version related to having older unupdated apps, but its still possible that there can be.

Is 10g supported under the current version of OLE? (64bit)

Is 10g supported under the current version of OLE? (64bit) Can anyone point me to installation and repository info for doing the install?
Alternatively, what is the highest version of 64 bit OLE that does support 10g (10.2)?
Thanks
EB

Hi;
For your question quick answer is:
1. Check installation guide
2. Check certification matrix from metalink
3. Check below notes:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Master Note of Linux OS Requirements for Database Server [ID 851598.1]
The Oracle Validated RPM Package for Installation Prerequisities [ID 437743.1]
Master Note For Oracle Database Server Installation [ID 1156586.1]
Regard
Helios

AP1131 supported radios in vWLC version 7.3.112

Similar Messages

Maybe you are looking for