AP1200 dual SSID's with 128 bit encryption

I trying to setup a AP1200 radio with two different SSID's with encryption.
Each SSID must use a different 128 bit WEP encryption.
Both SSID's must have simultaneous access to the wireless radio.
I get the client & radio associated but can not pass
data. And the Clients Link Speed is listed at 1Mbps.
Any help on the would be greatly appreciated.

I too have tried this (multiple SSIDs with multiple wep keys). After re-reading the document pointed to in the previous reply I still do not know how to set multiple WEP keys and assign them to the SSIDs. The document doesn't mention WEP keys at all.
Anone have a sample config using more than 1 WEP key and multiple SSIDs?
michael

Similar Messages

  • Where can I get Messaging Server 3.5 with 128-bit encryption?

    Where can I get Messaging Server 3.5 with 128-bit encryption?
    <P>
    Messaging Server 3.5 is available for export (40-bit encryption)
    and domestic (128-bit encryption). The domestic version includes
    support for Fortezza.

    It can be updated from any computer with an Internet connection but is best done from the computer which it normally syncs with. The update itself is free; if you have someone do it for you, you may be charged.
    Click here for installation instructions.
    (88299)

  • I am currently using a desk top imac with firefox as the browser. I need to access a website that requires 128 bit encryption. How do I increase bit encryption?

    when I log into view my accounts, a pop up asks me to use either explorer or netscape with 128 bit encryption. since i use a mac, i do not have either. can i up the encryption using firefox?

    https://support.mozilla.com/en-US/questions/903234
    see also SSL Encryption Report( fortify net) in '''cor-el''' reply, in support.mozilla link inside the above link.
    thank you

  • How do I get 128-bit encryption in Firefox 4.0 for a financial website?

    I need 128-bit encryption capability on my web browser in order to use a specific financial website for bill paying, The site's encryption test shows that Firefox 4.0 (newly installed) does not provide that level of security. Help?

    I think the www.opm.gov site may be looking for the '''U''' that was in the Firefox 3.6 and earlier useragents as it was one of the things removed in Firefox 4.0 and newer useagents. The site says it recognizes the browser but does not detect that your web browser supports 128-bit high encryption which contradicts.
    The "U" stands for "USA" (for the version with 128-bit encryption) (since 1996).

  • SSL, 128-bit encryption problem

    Hi
    I need to establish a connection over SSL with 128-bit encryption from my
    client application to Active Directory. But when a connection is established
    I look at the System log and see the cipher strength is only 56.
    Does anybody have an idea how can I raise the cipher strength?
    Thanks

    Sorry,
    It was my fault. I used 56-bit SDK. After upgrade all is perfect.
    "Gennady" <[email protected]> wrote in message
    news:9mgd4d$[email protected]..
    Hi
    I need to establish a connection over SSL with 128-bit encryption from my
    client application to Active Directory. But when a connection isestablished
    I look at the System log and see the cipher strength is only 56.
    Does anybody have an idea how can I raise the cipher strength?
    Thanks

  • 128 bit encryption for e-qip????? Is it possiable to open this site with version 33.0

    As ive seen in other posts Im having a problem with the e-qip website. It states that I dont have 128 bit encryption. Im running firefox 33.0 It has a walk through on how to configure firefox to work with the site but the directions are obviously old and I dont have any of the controls they are adjusting!

    The Mozilla browsers which include Firefox has supported 256-bit even encryption for a long time now.
    The issue could perhaps be the e-qip site is still looking for the old obsolete '''U''' in the useragent which was used to specify the encryption strength of 128-bit though 256-bit has been supported for a long while already at time by Mozilla applications. This "U" was removed in Firefox useragent as of 4.0 which was released March 22nd, 2011. The old 3.6.x was the last to have it.
    http://en.wikipedia.org/wiki/User_agent#Encryption_strength_notations
    https://hacks.mozilla.org/2010/09/final-user-agent-string-for-firefox-4/

  • Problems with IE and 128-bit encryption -- correction

    Repost with corrected e-mail address -- sorry!
    Hello. I'm having a problem with 128-bit SSL and Internet Explorer.
    I'm using WebLogic 5.1 (128-bit build) and a Verisign certificate.
    We're seeing some strange behavior with Internet Explorer. It seems to
    work fine from some machines, but doesn't work from others. On the ones
    that it doesn't work, it gives the "The page cannot be displayed"
    message. I've tried this with IE 4.0.1 (with 128-bit patch) and IE 5.5
    (128-bit by default) and have the same problems with both. We're seeing
    this problem across various Windows operating systems, but aren't seeing
    any pattern there. Any ideas as to what might be the problem?
    Thanks in advance,
    Steve

    The Mozilla browsers which include Firefox has supported 256-bit even encryption for a long time now.
    The issue could perhaps be the e-qip site is still looking for the old obsolete '''U''' in the useragent which was used to specify the encryption strength of 128-bit though 256-bit has been supported for a long while already at time by Mozilla applications. This "U" was removed in Firefox useragent as of 4.0 which was released March 22nd, 2011. The old 3.6.x was the last to have it.
    http://en.wikipedia.org/wiki/User_agent#Encryption_strength_notations
    https://hacks.mozilla.org/2010/09/final-user-agent-string-for-firefox-4/

  • Preview.app DOES in fact encrypt PDF's with 128 bit! Yay

    Hello good people on Apple Discussions,
    I just wanted to share my recent discovery that Preview.app actually does use 128 bit encryption.
    The program GuaPDF can display additional information about PDF's and this is what I found:
    https://docs.google.com/leaf?id=0B19T3w95-UkWMTQ0YTZlMTgtMGE5Zi00YjU1LTlhMTgtYmM 1NTI3NjNkZGRi&hl=en
    Good luck!
    Luuc.

    Just wanted to add to the knowledge base

  • Problems with IE and 128-bit encryption

    Hello. I'm having a problem with 128-bit SSL and Internet Explorer.
    I'm using WebLogic 5.1 (128-bit build) and a Verisign certificate.
    We're seeing some strange behavior with Internet Explorer. It seems to
    work fine from some machines, but doesn't work from others. On the ones
    that it doesn't work, it gives the "The page cannot be displayed"
    message. I've tried this with IE 4.0.1 (with 128-bit patch) and IE 5.5
    (128-bit by default) and have the same problems with both. We're seeing
    this problem across various Windows operating systems, but aren't seeing
    any pattern there. Any ideas as to what might be the problem?
    Thanks in advance,
    Steve

    This forum is for Microsoft Exchange.  Consider posting your question in the most appropriate Windows 8.1 forum here:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • 128 bit encryption requirement not working

    Using S1 6.0 sp5 on solaris 8, connecting to WAS 4.5 application servers.
    The require 128 bit encryption setting is in obj.conf with an error page to serve if lower than 128 bit encryption is used.
    This works fine for all plain text html requests, however, when a request goes to the websphere application the encryption requirement is ignored.
    Has anyone seen anything of this nature before?

    I'm not using SiteMinder or weblogic, my suggestion was based on your problem description. If you can show us your obj.conf file, we can check and try to find out a solution. You are right, AuthTrans will come before PathCheck but this should still allow PathCheck stage functions to be processed when the request processing goes through the pathcheck stage....I don't know how SiteMinder implements the SAF though.
    Thanks
    Manish

  • WRT54GS V7 128 BIT ENCRYPTION

    I just this morning bought a new wireless router, ran home and hooked it up.  I have had 3 other Lynksys (wired) routers in the past, do all my own work from mechanical to software and LAN.
    The initial setup went fine with the first desktop PC, running Windows XP Pro.  A second desktop set up fine, also running XP Pro.  I figured all would go fine with the laptop running the same thing.  However, after numerous times trying to setup a laptop with no joy, I had to call tech support. 
    The tech and went through all the settings and verified my work, just to find all was right (I knew it was, I had checked it so many times).  The encryption setting was to 128 bit.  She had me reset that to 64 bit and all is now functioning perfectly.  I have not had much experience with encryption problems before.
    So my questions are: 
    1. Is there a problem with the 128 bit encryption protocol in the router or in my laptop?
    2. Is this something to worry about?

    Answers to your question:
    1. there is no problem with your 128 bit protocol with the laptop nor the router. its just that 128 bit is a very long number and letters and it is case sensitive user might find a hard time trying to but it in next time. that is why 64 bit is oftenly used its for your own benefit. hehe
    2. and this is not something to worry about.
    PATIENCE IS A VIRTUE ;p

  • 128 bit encryption

    I am currently developing a web site.
    And one of the requirements is to enforce 128 bit encryption.
    We are currently using weblogic 6.0 sp1.
    If I try to connection our web site without 128 bit encryption on my IE 5,
    IE 5 just tells me that
    it could not find url.
    How could I check in http:// to see if user's browser is 128 bit encryption
    compatible?
    So that I can send them over to https:// with 128 bit encrytion or if they
    are not compatible,
    I can give a link to them to download patch.
    Please help.
    Thank you in advance.

    Safari does have 128 bit encryption; it's the web site that's been coded to sniff for certain browsers, like IE or Firefox. Complain to your bank and tell them to fix it so it works on all standards-compliant browsers, regardless of platform.

  • New iPad asks for WiFi password. There is none. My WiFi uses WEP 128 bit encryption, but there is no "password" to enter.

    Brand new to the iPad. It's asking for a password to the WiFi network in my home. There is no "password" as such associated with this WiFi network. It uses WEP 128 bit encryption where each byte is a hexadecimal number and is called a "key" Typing this lengthy thing in gives me no results. The iPad keeps on asking for a password. I have three computers and a DVD hooked to the network which has been working for a decade, so that's not the issue.
    Basically I'm stuck not being able to get onto the WiFi system.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Download to support 128 bit encryption

    since trying to download 4.0 version I cannot open firefox at all and need 128 bit encryption that was available prior to 4.0

    Current Firefox releases can't even go below 128 bit, SSL2 that supported this have been removed quite a few releases now (Firefox 8 dropped support for SSL2).
    *https://developer.mozilla.org/en-US/docs/Mozilla/Firefox/Releases/8
    128 bit is the minimum that you can use with Firefox and you can only go higher (e.g. 168 or 256).<br />
    128 bit shouldn't be used these days and servers that only support 128 bit should update their software.
    Firefox supports AES-256 since 2002, so that is already more than 10 years.
    * https://www.fortify.net/sslcheck.html

  • XI - 128 Bit encryption

    Whether XI (3.0, SP 16) is capable of doing 128 bit SSL Encryption? We are in the process of making a bridge with our external partners (B2B).
    We want to install Certificates, and want to do the Encryption?
    Who will install the Certificates? From where we can buy these certificates?
    Who will do this process?
    What are all the other points that we need to remember when we do this 128 bit Encryption?
    Thanks

    Hi,
    SSL is supported by WebAS, and XI is just an application on top of it.  The certificates are entered using the Visual Administrator, and also in the ABAP environment, depending on whether you also plan to use it with the SOAP adapter.  The configuration is normally done by the basis person.
    128-bit is supported.  You can get certificates from various providers, e.g. Verisign.  To work with a partner who has an user certificate, that user will have to provide you with his public certificate.
    The XI Configuration Guide that comes with the installation CD have the instructions.  Also, you can access that following weblogs for additional info:
    /people/gregor.wolf3/blog/2005/10/11/setup-https-ssl-for-the-sneak-preview-sap-netweaver-04-abap-edition-on-windows
    /people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
    Regards,
    Bill

Maybe you are looking for

  • Installing Adobe CS6 on Windows 8 (2012) Consumer Preview

    Hello, First off, yes I know it isn't supported by Adobe (yet), however, I want to present to you my case for future users. I have been investigating an issue I have ever since I got an Error 101 with Adobe Download Assistant where after extracting,

  • Problems with Acrobat 9 or LiveCycle 8 Distributing Forms

    Myself and a coworker create all the forms in our office. However, all the forms have submit buttons to a general address that everyone can check. Though we have that general address on the submit to email button mailto: [email protected] it still se

  • How do I get my iphone 4 out of restore mode w/o erasing my photos?

    The Genius bar was no help. I've tried the hard reset option, and the plug it in holding the home button thing, and iRecover w libenv gave me "no such command" responses. Please help. I MUST recover my photos! thanks in advance. I need a REAL genius!

  • Unplanned costs cannot be posted through MM

    Hello MM Gurus Scenario : Create PO for vendor A , buying an item  , Do GR , then pay the invoice to Vendor A . Unplanned costs were incurred for the delivery of the item and the delivery wa shandled by Vendor B How can we pay Vendor B and still refe

  • Convert xml into SAP using dataset

    Hi All, How to convert XML into itab using dataset, in this conversion have any function module available? please give me a sample program (having any). and material also. Thanks, Suresh maniarasu