AP1231G upgrade to thin-ap & cannot find the "lwapp" or "capwap" command !!!

Dears,
I upgarde the AP1231G to thin-ap!
I want to set static lwapp ip information.
But, The AP not the command "lwapp" or "capwap"?!
Does anyone know where I can find documentation on how to fix this?

I just ran into the same issue with 1230's but only when the AP was on a different vlan than the WLC. What I did was put an ip-helper address on the vlan the ap was on and pointed that to the managment interface of the wlc.
interface vlan
ip helper-address
Then on your L3 device, globally configure the following:
ip forward-protocol udp 12222
ip forward-protocol udp 12222
ip forward-protocol udp 5246
ip forward-protocol udp 5247
I don't know what version you are running and if you are running secure or not. After the AP's join and download the firmware, you can remove these.

Similar Messages

After upgrading to version 6.02, I cannot find the "Download this video"command on right-hand top corner on the RealPlayer screen when viewing a video from You-tube.

Cannot download video from You-tube.

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
a fresh win 8.1 enterprise install on a Hyper-V VM.
I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
event log says:
Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
"C:\RSAT Windows8.1-KB2693643-x64.msu" ")
CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
You can also re-try downloading the files to see if your original download was just corrupt.
Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
It was a permissions issue! Thanks so much Bruce!
I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
1) double clicked the installer.
2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
3) Installation was successful.
Not really sure why this happened as it doesn't make sense but it's working now :-)

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

Error "The system cannot find the path specified" after upgrading to R2

Hi guys,
I upgrade from SP1 CU3 to R2 and since then I can not display images, I get the error:
Failed to run the action: Instalar Windows y Configuration Manager.
The system cannot find the path specified. (Error: 80070003; Source: Windows)
just finished restart after applying the operating system. I installed all the updates, I delete and add the pxe point and nothing. The fact is that I have other tasks to capture using the same step and works fine. The hardware is a Virtual Machine
de vmware.
If anyone has ever happened or can help would be grateful. Sorry for my English.
Thxxx!!!!
Executing command line: OSDSetupWindows.exe TSManager 02/03/2014 19:08:39 932 (0x03A4)
==============================[ OSDSetupWindows.exe ]=========================== OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
Command line: "OSDSetupWindows.exe" OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
Releasing: PS100084 OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
Unsuccessful in releasing PS100084. 80070490. OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
!shFile.null(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,823) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
Failed to open file: C:\Windows\panther\unattend\unattend.xml (0x80070003) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
this->resolveConfigFileVariables(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,423) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
setup.run(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,1650) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
Exiting with code 0x80070003 OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
Process completed with exit code 2147942403 TSManager 02/03/2014 19:08:39 932 (0x03A4)
!--------------------------------------------------------------------------------------------! TSManager 02/03/2014 19:08:39 932 (0x03A4)
Failed to run the action: Instalar Windows y Configuration Manager.
The system cannot find the path specified. (Error: 80070003; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
MP server http://SCCM.domain.com. Ports 80,443. CRL=false. TSManager 02/03/2014 19:08:39 932 (0x03A4)
Setting authenticator TSManager 02/03/2014 19:08:39 932 (0x03A4)
Set authenticator in transport TSManager 02/03/2014 19:08:39 932 (0x03A4)
Sending StatusMessage TSManager 02/03/2014 19:08:39 932 (0x03A4)
Setting message signatures. TSManager 02/03/2014 19:08:39 932 (0x03A4)
Setting the authenticator. TSManager 02/03/2014 19:08:39 932 (0x03A4)
CLibSMSMessageWinHttpTransport::Send: URL: SCCM.domain.com:80 CCM_POST /ccm_system/request TSManager 02/03/2014 19:08:39 932 (0x03A4)
Request was successful. TSManager 02/03/2014 19:08:39 932 (0x03A4)
Set a global environment variable _SMSTSLastActionRetCode=-2147024893 TSManager 02/03/2014 19:08:39 932 (0x03A4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 02/03/2014 19:08:39 932 (0x03A4)
Clear local default environment TSManager 02/03/2014 19:08:39 932 (0x03A4)
Let the parent group (Instalar sistema operativo) decides whether to continue execution TSManager 02/03/2014 19:08:39 932 (0x03A4)
The execution of the group (Instalar sistema operativo) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
Failed to run the last action: Instalar Windows y Configuration Manager. Execution of task sequence failed.
The system cannot find the path specified. (Error: 80070003; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
MP server http://SCCM.domain.com. Ports 80,443. CRL=false. TSManager 02/03/2014 19:08:39 932 (0x03A4)
Setting authenticator TSManager 02/03/2014 19:08:39 932 (0x03A4)
Set authenticator in transport TSManager 02/03/2014 19:08:39 932 (0x03A4)
Sending StatusMessage TSManager 02/03/2014 19:08:39 932 (0x03A4)
Setting message signatures. TSManager 02/03/2014 19:08:39 932 (0x03A4)
Setting the authenticator. TSManager 02/03/2014 19:08:39 932 (0x03A4)
CLibSMSMessageWinHttpTransport::Send: URL: SCCM.domain.com:80 CCM_POST /ccm_system/request TSManager 02/03/2014 19:08:39 932 (0x03A4)
Request was successful. TSManager 02/03/2014 19:08:39 932 (0x03A4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,923) TSManager 02/03/2014 19:08:56 932 (0x03A4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 02/03/2014 19:08:56 932 (0x03A4)
**************************************************************************** TSManager 02/03/2014 19:08:56 932 (0x03A4)
Task sequence execution failed with error code 80004005 TSManager 02/03/2014 19:08:56 932 (0x03A4)

Hi,
There is a workaround:
Wait until you get to the point where you select the task sequence
Hit “F8” to open the command prompt
Type “diskpart” and hit return
Type “select disk 0” and hit return
Type “list volume” and see if the CD/DVD drive has a drive letter of C:\ or D:\. If it does move to step 6, otherwise close the command prompt and begin the staging otherwise.
Type “select volume X” (where X is the volume number of the CD/DVD drive) and hit return
Type “assign letter=e” and hit return (if the E:\ is already taken up use the next available letter)
Type “list volume” and hit return to ensure the new drive letter is active
Close down the command prompt and begin staging
Reference:
Failed to open unattend.xml (0×80070003) error
http://nikifoster.wordpress.com/2012/09/07/failed-to-open-unattend-xml-0x80070003-error/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I bought PhotoShop 12.0 for Windows 8. I cannot find the Curves function in the program. Is Curves excluded from this version? If so, how can I upgrade to get Curves? Thank you!

I bought PhotoShop 12.0 for Windows 8. I cannot find the Curves function in the program. Is Curves excluded from this version? If so, how can I upgrade to get Curves? Thank you!

teddy27 a écrit:
Thank you, Michel, for your helpful answer. I have downloaded SmartCurve and saved the files in C:\program files\adobe\Photoshop elements\plug-ins. I re-started PhotoShop. Do I access SmartCurve to adjust curves from within PhotoShop?
You can acces it from the menu 'Filters', there is a line called 'Easy.Filter', click it and it shows 'Smartcurve'.
Separately, can I upgrade my PhotoShop Elements to Photoshop without signing up to the CC 'rental' system of monthly payments? Sincere thanks, Ted
I know that you don't need the CC 'rental' subscription to have Photoshop, but as far as I know, there is no upgrade path from Elements except periodical special offers.

HT1338 I cannot find the OS X Lion 10.7 upgrade package

For the life of me, I cannot find the OS X Lion 10.7 upgrade package. My mac mini is too old to go any higher, and I need iCloud on it. I need to get from OS X 10.6.8 to 10.7.

You have to call Apple store to buy 10.7 Lion.
They will send you a code via e-mail. That can be used to download Lion.
1-800-692-7753
Best.

Upgraded to Premiere Elements 12 and unlimited storage .. Elements program cannot find the catalog.

Upgraded to Premiere Elements 12 and unlimited storage per Adobe staff, only problems since. Once I got catalog to properly start loading to Revel the new software wrongly messaged was that it was completely up to date. Now when i tried to start Elements program cannot find the catalog. I am the type person that am willing to pay to get this resolved so who do I call? I am doing this as a hobby and this is not fun etc... many useless unpleasant hours.

I appreciate what you are both saying -- but it is not the music that is the problem. The video itself is NOT blocked - you can view it on a computer -- but when you try to view it on ipad/iphone the message says, "not available on this platform". Here is a link to a video I did in Elements 9 on Tuesday:
http://youtu.be/06TaM22SkdE
Here is the link to the video done last night in 11:
http://youtu.be/h353KBGkodU
The "raw files" are both adobe flash.flv -- it's just not making sense...
Thank you!!!

I need to upgrade to OSX version 10.6.8 or later but cannot find the download anywhere?

Please help! - I need to upgrade to OSX version 10.6.8 or later but cannot find the download anywhere?

10.6.8 requires 10.6 some version to be installed in the first place. Stedman's link will give you 10.6.3 retail which should work with the machine in your signature. If you need the 10.6.8 update, see: http://support.apple.com/kb/dl1399
If you need 10.7 or above, read this tip first:
https://discussions.apple.com/docs/DOC-6271

Using ios 6 beta 4 but i cannot find the option to upgrade to the official release!

IM using ios 6 beta 4. But i cannot find the option to get the oficial release verision on itunes or via OTA! Any solutions!? THank you!

There might be a better solution found for that at the developer support site

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

AP1231G upgrade to thin-ap & cannot find the "lwapp" or "capwap" command !!!

Similar Messages

Maybe you are looking for