AP1252 in dual radio mode with in-line power.

Hi,
Has anyone actually managed to deploy the AP1252s in dual radio mode and been able to power via a POE device?
The information regarding max power supplied is misleading.
For example, the 6500 802.3af POE line cards appear to only provide a max of 16.8W (from the 12.2.33SXH2 release notes).
The 4500E with the new enhanced POE line cards can apparently provide 20W with 12.2.44SG release.
The 3560E/3750E documentation is contradictory - early bulletins state support for Enh POE and then the more recent notes state that it is not supported.
Any real world experience of this issue would be greatly received.
Thanks

What you have here is correct. 6500 with a sup720 and 12.2.33shx2 will only provide max of 16.8W. The E-Series can provide the 20W max as long as you have the correct code.
Ethernet switch power options
â¢ Cisco PoE switches enhanced to support higher power requirement of 1250
â¢ Catalyst 3750-E / 3560-E
â¢24 port: 20 AP1250s
â¢48 port: 40 AP1250s
Cat3K 3750E: 12.2(44)SE ï§Supports 2 radio 11n mode
WS-C3750E-24PD-S
WS-C3750E-24PD-E
WS-C3750E-48PD-S
WS-C3750E-48PD-E
WS-C3750E-48PD-SF
WS-C3750E-48PD-EF
Jan 2008 ï§Switch power supply must be correctly sized for PoE load
WS C3750E 48PD 3560E:
WS-C3560E-24PD-S
WS-C3560E-24PD-E
WS-C3560E-48PD-S
WS-C3560E-48PD-E
WS-C3560E-48PD-SF
WS-C3560E-48PD-EF
Cat4K
4500E Linecards:
WS-X4648-RJ45V-E
WS-X4648-RJ45V+E
12.2(44)SG
Apr 08
ï§Supports 2 radio 11n mode
ï§No limitations on the number of AP1250s that can be used
with a card or chassis
ï§Chassis power supply must be correctly sized for PoE load
Cat6k
Linecards:
WS-X6148A-GE-45AF
WS-X6148-GE-45AF
WS-X6548-GE-45AF
12.2(33)SX
H2
March 31
ï§Supports 2 radio 11n mode
ï§Recommend 1:1 replacement of 802.11a/b/g to 802.11n
ï§No limitations on the number of AP1250s that can be used
ith d h i
Presentation_ID Â© 2006 Cisco Systems, Inc. All rights reserved. 11
WS X6548 GE PoE daughter cards:
WS-F6K-48-AF=
WS-F6K-GE48-AF=
with a card or chassis
ï§Chassis power supply must be correctly sized for PoE load

Similar Messages

How can I get to DFU mode with a broken power button?

How can I get to DFU mode with a broken power button?

aarons84 wrote:
This is bad, but i tried jailbraking my iphone
You may as well stop there. We can't help you.

Best Airport Extreme Wireless Radio Mode with Old and New Macs and PC

I'm running Airport Utility 5.3.2 and am running / connecting to the Internet with a new Airport Extreme 802.11n Gigabit Ethernet (the new squared off one) with "Version 7.3.2".
In addition to my new MacBook Black (which has 802.11n, I have two other older Maxs that run 802.11b/g (and also a PC that has 802.11.b/g/n).
Currently, the Airport Extreme's "Wireless" "Radio Mode" is set to
802.11n (802.11b/g compatible)
But, reviewing the Radio Mode menu, I see there are a number of choices that seem "faster" - 802.11n only (2.4 GHz), 802.11n (802.11a compatible) and 802.11n only (5 GHz).
Can I set the Radio Mode to any of these other settings and still have my older Macs (and the PC) connect to the internet using this Airport Extreme? Or, do I have to leave my Airport Extreme Radio Mode set to what appears to be a slower speed 802.11n (802.11b/g compatible) setting to allow others to use this Airport Extreme Base Station?
FWIW, I do have an older Airport 802.11g version 5.7 still connected and set up and the older computers can / could connect through that. However, I was hoping to give that one to a friend for their use elesewhere and wanted to have only one Airport Extreme set up at my house.

"you'll use N+B/G at 2.4 GHZ."
I guess you means that I should continue with my current setting on the Airport Extreme - which is "802.11n (802.11b/g compatible)" - if I want all my computers to access the web via the Extreme. Correct?
I'm too much of a novice to try a "bridge" mode setup.
However, your suggestion (I think) "It would be more reliable and faster speed if you could connect both routers to using ethernet" does give me hope.
My Verizon Fios modem is actually a router. Indeed, I have my TiVo box connected to the Fios modem/router.
If I connect BOTH of my Airport Base Stations to the Fios modem/router and then do the following:
(1) set the newer "Extreme" Base Station to "802.11n only (5 GHz)" and
(2) keep the older Base Station (running 802.11g) as is
then my (and others') newer computer(s) with 802.11n can connect at high speed via the Extreme and older computers can still connect using the older Base Station.
Correct?
Message was edited by: JoeS

Table in edit Mode with infinite lines ?

Hi,
We are designing an application, where as one of the requirement is to have a table with infinite open lines for user input.
By Default table should be in EDIT mode and user should be able to enter values without the need to click on a line to insert a new row every time he/she wants to input a value.
How can we acheive this requirement in WDA. In classical dynpro it is very easy to do this.. but I am struggling to find a way around for this..
Thanks in advance.
Regards
Rohit Chowdhary

Hi Rohit,
>My experience with tables that are over 1000 lines, showed performance and
>even stability issues for IE.
I can only emphasize what Phil said. Especially, in your case with an editable table, displaying more than 50 rows at a time (depending on the number of columns) can cause a bad user experience, because the browser needs to handle all the html and javascript we throw at it.
Imho there are two solutions:
(a) Try to use the ALV
(b) In case you would like to use the table ui element, you could add enough empty context elements to the context node where the table binds to, so that a user has always plenty of empty rows available. A toolbar button could provide the user with more initial lines.
Best regards,
Thomas

Gui_download --- DAT mode with header line

Hi all,
I hav to replace ws_download by gui_download.
CALL FUNCTION 'WS_DOWNLOAD'
       EXPORTING
            FILENAME            = P_FNAME
            FILETYPE            = 'DAT'
       TABLES
            DATA_TAB            = OUTPUT_TAB
            FIELDNAMES          = INT_FLDNAMES
please tell me how to pass these two tables(output_tab and int_fldnames) in gui_download.
plz explain with example.
Thank you.

You can still use the FMs "download"
see below
CALL FUNCTION 'DOWNLOAD'
         EXPORTING
              FILENAME                = P_FLPTH
              FILETYPE                = C_DAT
              ITEM                    = 'GP Bridge Report'
              MODE                    = ' '
              FILEMASK_MASK           = '*.xls'
              FILETYPE_NO_SHOW        = ' '
              SILENT                  = ' '
         TABLES
              DATA_TAB                = VIT_TGT
              FIELDNAMES              = LIT_FIELDNAME
         EXCEPTIONS
              INVALID_FILESIZE        = 1
              INVALID_TABLE_WIDTH     = 2
              INVALID_TYPE            = 3
              NO_BATCH                = 4
              UNKNOWN_ERROR           = 5
              GUI_REFUSE_FILETRANSFER = 6
              CUSTOMER_ERROR          = 7
              OTHERS                  = 8.
    IF SY-SUBRC <> 0.
      message E000 with 'Problem in File Download'.
    ENDIF.
If you wanna to use only GUI_Download the pass the target table and the field catalog table which you used.
Thanks,
Ponraj.s.

N80 Radio interference with screen saver/power sav...

Hi all,
When listening to the Radio, (with Nokia's supllied ear phones), I can here distortion/interference. Has anyone heard this? When i press a key on the phone the noise goes away. I am convinced it's the screen saveer or power save functions thar cause it.
Anyone else had this?
Cheers!
Dave

09-Jul-2006
11:00 PM
mr_rolfi wrote:
Hi all, When listening to the Radio, (with Nokia's supllied ear phones), I can here distortion/interference. Has anyone heard this? When i press a key on the phone the noise goes away. I am convinced it's the screen saveer or power save functions thar cause it. Anyone else had this? Cheers! Dave
Yes, I have the same problem. Very annoying as the radio is otherwise very good. (As is mp3 playback.)Has anyone updated the firmware and noticed an improvement?

Airport Extreme Radio Mode

I have an Airport Extreme (older one that I believe doesnt broadcast dual radio mode). I have multiple Apple devices (2 iPhones and 1 iPod Touch) that I would like to connect via WiFi. When I have the wireless network broadcasting in b/g radio mode I can see and connect to my network but in that mode my Macbook connection is very slow (< 2mpbs per speedtest.net). If I set Airport to n 5GZ or a compatible I get great speeds on Macbook (20 mpbs +) but cant access via iPhones/iPod Touch.
Is there anything I can do to have both access with mobile devices and still have decent Macbook connection?
Any help greatly appreciated.
Thanks,
c-

Bob,
Thanks for the reply. I have tried the 802.11n (802.11b/g compatible) mode. When I use that mode I can indeed connect my iDevices however my Macbook experiences download speeds of < 2mbps (according to speedtest.net). I use a real world test of trying to download Apple keynote from iTunes store under different radio modes. Under N 5gh, N 2.ghz, or N (a compatible) the latest keynote which is 1.22gb will download in about 35 to 50 min. When I use b/g compatible mode iTunes tells me it will be 7 hours.
Every once in a while I will set to b/g and test speeds and if I get lucky and see speeds of > 15 mbps and then leave it alone everything is perfect. But it seems completely random. I need to just keep trying, hope to get lucky and then hope it doesnt go away.
I was hoping that there was something in a deeper setting while under b/g compatible mode that would allow me to have acceptable speeds on Macbook.
Thanks,
c-

[Other 865 Series] MSI 865PE Neo2-V and Dual Channel Mode Question

Hello, I have a quick question regarding dual channel mode with my current motherboard. I have an MSI 865PE Neo2-V and am wondering if it is possible to enable dual channel mode while having three RAM modules inserted in the motherboard.
For example, I currently have one 512MB PC3200 module in my computer. If I purchase another 512MB module and run them in dual channel mode, will it be possible to buy a 1GB module or another size module, and still have all three slots run in dual channel mode? Or is dual channel only operational on this motherboard if only two of the three slots are occupied?
Thanks.

Dual channel requires an even number of sticks.

My Imac is showing gray screen with red line when booting and restarts again

My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help

The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode

Dual Radio WGB and LWAPP Controller

Hallo everyone,
I have a wireless network managed by a 4402 controller with this sw version : 5.2.178.0
The client wants to add a stand alone wgb (cisco 1242 with an ios 12.4(21) ). The standalone ap associate to an LWAPP AP using the 5Ghz interface and propagate the same ssid at 2.4Ghz (I've also tried using a different ssid ). Actually the WGB is the only AP using that SSID at 2.4Ghz. As for the wired clients of the WGB I have no problems but if the client associate to the 2.4 Ghz SSID, I see it associated on the controller but no traffic from or to the client is allowed.
If for any case, the 5Ghz interface is resetted and the association betweeen the WGB and the controller is reformed, the 2.4Ghz client starts receiving and receiving traffic.
Any idea how to set things up from the the first association?
The wgb ssid is not set as infrastructure-client and the controller correclty identify it as a WGB client. In the same way the controller correclty see the 2.Ghz client like a wired client of the WGB but unless the association b.t.w the WGB and the controller is reset, no traffic reach the client.
I think that may be a problem related to how the IAPP protocol notify the presence of a client to WGB but I don't know how to work things out.. any idea?
Thank you in advance!

The 3600 series Access Points can have either internal or external antennae. You can tell by looking at the top of the AP. If there are 4 antenna connections (one in each corner) then they are external antennae.
If you cannot get to the AP to check them physically, the antenna type is also denoted by the part number.
AIR-CAP3602I-x-K9 has internal antennae
AIR-CAP3602E-x-K9 has external antennae
The 3600 does have dual radios built in, operating in the 2.4GHz and 5GHz frequency ranges. However, for them to show up as such, you have to enable both radios on the AP. You can do this either through the WebUI or the CLI.
The 802.11ac option is an external module that is attached to the underside of the 3600 AP. Please find the datasheet for the module here:
http://www.cisco.com/en/US/prod/collateral/modules/ps12859/ps13128/data_sheet_c78-727794.html
The 1552c Series access points are also dual-radio systems and should also have both radios turned on through the WebUI or CLI. Note the quote " The Cisco Aironet 1552C/1552CU Outdoor Mesh Access Points are dual-radio systems with DOCSIS 3.0/EuroDOCSIS 3.0 (8x4 HFC) compliant cable modem for power and backhaul." taken from the datasheet for these APs found here:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html
Cisco ships the APs with one Radio enabled and if you want the dual-radio functionality, you have to turn that on. Once that is done, you should see the APs show up correctly in the WLC 5508.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Extend an AE dual-band router with a 2nd AE dbr: will automatic mode work?

I have a new Apple Extreme dual-band router, and it works just great. My N devices all get the maximum bandwidth, and the G devices connect easily as well. I have a section of my house that gets weak reception, and want to extend the network with a second router.
If I bought a second Apple Extreme dual-band router, and configured it to Extend Wireless Network and Allow Wireless Clients, could I then leave it on the default radio mode of Automatic? It seems like either router would then be able to tell if the wireless clients were N or G, but communication between the routers would be N. I want to keep the maximum bandwidth for my N devices.
Thanks in advance

I have a new Apple Extreme dual-band router, and it works just great. My N devices all get the maximum bandwidth, and the G devices connect easily as well. I have a section of my house that gets weak reception, and want to extend the network with a second router.
If I bought a second Apple Extreme dual-band router, and configured it to Extend Wireless Network and Allow Wireless Clients, could I then leave it on the default radio mode of Automatic? It seems like either router would then be able to tell if the wireless clients were N or G, but communication between the routers would be N. I want to keep the maximum bandwidth for my N devices.
Thanks in advance

MacBook Air and problems with Time Capsule in 5GHz Radio Mode

We have our Time Capsule configured to 802.11n only (5 GHz). We've done this to work more efficiently in a particularly noisy wireless area. The problem is that the MacBook Air can't maintain a connection to it and when it loses the connection, the wireless interface seems to disappear from the Mac altogether - the wireless status indicator just shows an empty cone. The only solution is a restart. Sometimes it loses the connection after a couple of hours, sometimes within minutes, though it always goes eventually. All other machines on the network are fine, and switching the Time Capsule to 802.11n only (2.4 GHz) solves the problem, though there's a lot of noise at that frequency and our network performance as a whole suffers.
I know there's similar threads around dealing with the MBA and wireless issues (I've tried all the solutions vaguely related, e.g. deleting and recreating the wireless interface), though none that deal with this specific problem, which I'm convinced is caused by the radio mode of the Time Capsule.
All software / firmware is the latest:
MacBook Air 10.5.2 Wireless Card Firmware Veriosn Broadcom BCM43xx 1.0 (4.170.46.5)
Time Capsule Version 7.3.1
I was hoping the recent firmware updates would sort this... any one else running a Time Capsule in 5GHz mode with a MacBook Air?

I'm running my TC in 5ghz mode with my MBA. My original problem was the lack of signal strength coming from my AEBS caused the MBA to have a slow connection. There are a number of pipes in the wall that separates the two rooms where my MBA lives and the AEBS is.
So, I hard wired the TC to the AEBS and placed the TC in the room where my MBA lives most of the time. Now that the signal strength is really good I'm not having any issues.

MBP with external LCD TV in dual display mode

I’ve got MacBook Pro 15" 2.O 2GBRAM with Mac OS X (10.4.10) .
I know there is a way to hook up my MBP to my LCD TV (Sony 32” that support PC input). I’d like to use it in dual mode with “Apple Logic Pro” so that mixer setting will be on LCD TV and arrangement window will be on MBP.
I know this is possible with desktop units that have dual monitors but I wasn’t sure if I could do it with MBP(???)
Any thoughts or suggestions?
Thanks

It'll work exactly the same way as it does on a desktop.

Not pleased with PreEl 11 dual monitor mode

finally got PreEl 11 working on my PC and do not like the dual monitor mode. in previous PreEl programs i could detact the monitor and out it in to another screen and still have all the tools on the other screen. now the monitor and most of the tools move with the monitor so i have a split work space. not very handy at all. i am HOPING that someone can figure out a way to move just the monitor and not everything else with it...

If you've got a feature request, you should contact Adobe on their web site. (They're likely developing the next version now, so it's a good time to do so!)
This is a user-to-user help forum. We can't do anything about the interface itself. (And, yes, breaking it into a timeline and everything else is really the only option for version 11.)

Hello- I use a radio app with my iPod touch 5, when I plug it in to my JBL dock speaker, it shuts down after about 10 minutes. Can I defeat this auto shut off mode ? thanks -

Hello- I use a radio app with my iPod touch 5, when I plug it in to my JBL dock speaker, it shuts down after about 10 minutes. Can I defeat this auto shut off mode ? thanks -

Al that is left are the standard fixes:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

AP1252 in dual radio mode with in-line power.

Similar Messages

Maybe you are looking for