AP350 IOS and vxworks compatibility

We are thinking of upgrading a couple of AP350s to IOS in an attempt to fix a specific problem. If successful, we will probably go ahead and convert all remaining AP350s. However, for a period, we may have both vxworks and IOS access points on the network. If a 350 running IOS fails, I would like to know if I can then replace this with an access point running vxworks. In short, is it possible to run vxworks at one side of the radio link and IOS at the other?
Thanks in advance for your help,
Tracey

No need to reply to this. I have just realised that it is not possible to convert a 350 bridge to IOS.

Similar Messages

OS, iOS and iTunes Compatibility

I have some iOS and iTunes updates available, but since all my gear is older, I'm getting hesitant about performing the updates due to compatibility concerns and "end-of-life" issues. I've tried searching out to see what is compatible with what, but for the life of me, I can't seem to find a straight answer anywhere, and I'm generally quite successful in my internetting.
I currently have a 2GHz Intel Core 2 Duo 17" iMac with OS X 10.7.5, running iTunes 11.1.5 (which wants to update to 12.0.1), which is cross-synced with both an iPhone 4 (with it's final OS of 7.1.2) and an iPad 2 running iOS 7.1.1 (which wants to be 8.1).
I can't seem to find any reference as to which versions of what are compatible with everything else. If I update iTunes to 12.0.1, will it still work properly with my poor old iPhone? If I update my iPad to 8.1, will it still be compatible with iTunes 11.1.5? If I update my iPad to 8.1, will it cause syncing issues with the older iOS on my iPhone? Any insight would be greatly appreciated.

I currently have a 2GHz Intel Core 2 Duo 17" iMac with OS X 10.7.5, running iTunes 11.1.5 (which wants to update to 12.0.1), which is cross-synced with both an iPhone 4 (with it's final OS of 7.1.2) and an iPad 2 running iOS 7.1.1 (which wants to be 8.1).
Nothing is “cross-sync’d”.
advices are simply sync’d with iTunes.
If I update iTunes to 12.0.1, will it still work properly with my poor old iPhone?
Yes.
If I update my iPad to 8.1, will it still be compatible with iTunes 11.1.5?
You would now be running iTunes 12.
If I update my iPad to 8.1, will it cause syncing issues with the older iOS on my iPhone?
No. iDevices don’t sync with each other.

HT5887 Why doesn't AirDrop work between iOS and OSX?

Apple has almost always never fail to seamlessly integrate its devices, until now? I understand that there is iCloud for content sharing between devices. However, AirDrop was introduced as a simpler way for users to not only share contents between their own devices but as well as other users. I understand that the logic behind AirDrop was practiced by windows users since the creation of modem, though it requires many complex steps and compatibility checks to achieve a simple logic. (and Windows never really bothered with perfecting it over all these years, its improved, still buggy)
My question is, why can't we share contents between iOS and OSX? Everytime I need to transfer some files/content, the quickest way I could think of is to send an email to myself. Just the other day I tried to have my colleague AirDrop a file from his 5S to my MBP. I told him with great confidence that this tech existed long ago, and finally Apple decide to kick some DOS *** and launch a super simple version. And that it should by right work with any device with BT and/or WiFi, but knowing Apple, it would only be for their own products. Not in my wildest dreams it didn't work cross OS.
Forget the embarassment, I want to be pampered by this seamless technology. I want the type of exclusiveness with my fellow family and friends of which majority are Apple lovers. I want to regain the confidence that whenever I step out of my room, whichever device I carry/left out, I can do/resume/engage everything as long as I carry an Apple device.
Music, Videos, E-mails, Docs, Images, iMessages, are all checked. So why not Content Sharing?

We would like to know the answer as much as you would. All you can to direct your questions to the only people who can really answer: http://www.apple.com/feedback/

HT4972 my ipod touch wont let me update IOS and becuase of that i cant download any apps

my ipod touch wont let me update IOS and becuase of that i cant download anything of the app world is there anyway of helping me

Do you have a 2G iPod. Those can only go to iOS 4.2.1.
A 1G can only go to 3.1.3
A 3G only to 5.1.1
Identifying iPod models
What version of iTunes is on the computer? The latest is 11
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it

updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.

Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried?

I updated to new ios and now it is not syncing properly. How can i revert back to the previous installed version?

I updated to new ios and now it is not syncing properly. New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs. It previously synced perfectly before the IOS update. How can i revert back to the previous installed version?

Downgrading the iOS is not supported by Apple.
Try:
Re: What does the gray dotted circle in iTunes mean?
https://discussions.apple.com/thread/4676111?tstart=0\\
Dotted circles next to songs, won't sync, red circle with square?

Having a problem with my ipad... I tried to install ios and the ipad has frozen

I am having a problem with my Ipad air. tried to install ios and my ipad has frozen

Click here and follow the instructions.
(124611)

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Report for IOs and PR

HI Gurus
Please tell me the T code for report which will list the IOs and corresponding PR s
Thanks
Avadhut

Hi,
Use ME5A.
Reg,
Ashok

I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty

I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?

Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

Is it possible to synchronize mail between all iOS and OS devices?

I am running an iPhone 5 and iPads 3 & 4 with iOS 8.1 plus 2 MacBook Pros, and 3 (4th ordered) Mac minis with OS Yosemite 10.10. I also use an iPhone 4 and iPad 1 with older iOS software but mail is not important on them. I am the only user of these devices (reason = personal convenience).
I have mail accounts with Hotmail, Live, iCloud, Yahoo and Centurylink.
My problem is that because the mail is not synchronized (deleting an email on one device does not delete it from other devices or from the server) I now have up to and over 10,000 accumulated emails on various devices. I don't mind keeping all my old emails IF I could eliminate all the emails I choose to delete from any of the devices.
The result is that email has become unmanageable for me.
I had very high hopes that Apple would fix this with Yosemite and iOS 8.1 but that does not appear to be the case.
I suppose I could work around it by always going to Hotmail, Live, Yahoo, Centurylink etc. on the internet and not using iOS and OS mail but that seems a dumb way to have to do it.
Every time I buy a new iOS or OS device (like the new mini) it compounds the problem with yet another disorganized mail mess.
There is so much spam, phishing, data mining etc. going on that I use the multiple email accounts to pre-filter anticipated email responses. As an example I need a Yahoo account to use Yahoo but I know almost all Yahoo mail is spam so I can ignore it most of the time.
Any suggestions?
Thanks

Thank you for your reply.
I am somewhat new to iOS and OS having grown up with DOS and Windows. I am not familiar with IMAP and iCloud and I am not even sure which types of servers my various emails use.
The problem I would anticipate with iCloud is that (I assume) it would limit my access to data (including mail) on the iCloud to when I happen to be logged onto the internet. I also assume(?) that large files (photos etc.) would require some time to download whenever I wish to access them from whichever device I happen to be using (I hope I am wrong about this).
I have kept my devices to 500gb - 1TB for OS and 32gb - 128gb for iOS but since I have pretty slow WiFi (shared with DirecTV Whole Home and Netflix streaming) it is my impression that iCloud might be quite limited due to data transfer times.
Perhaps a factor would be that I have 2 DSL lines and my main DSL line is connected to two wireless routers (to also provide WiFi in a metal building that blocks WiFi and Cellular signals)
I may be totally wrong in my assumptions regarding iCloud. My mail is not so urgent that I need access to it instantly and I could wait until I had internet access or I can get it on my iPhone. My main concern with iCloud would be my data files (Word, Pages, Excel, Numbers etc.).
On the other hand, if I wanted to keep my 10,000 emails that would take up a lot of iCloud memory and I don't know how to measure how much storage it would take or how to move Hotmail or even iCloud mail to iCloud.
It may take me some time to figure this out.

Is there a way to open the settings app from an air app on both iOS and android?

Since you can't change the notifications settings within the app, is there a way to simply open the settings app from an air app? like a link or something like that?

Even on iOS this has only recently been added by Apple for iOS 8 only using the line:
[[UIApplication sharedApplication] openURL:[NSURL URLWithString:UIApplicationOpenSettingsURLString]];
So you would have to wrap this in an ANE and then again, only for iOS and only call it in iOS 8+

HT4962 I have an Ipod Touch 2nd generation with version 4.2.1 IOS and it no longer seems to be recognized as a device when I plug into my computer. I want to update my sync settings but can't do this without being able to select the device. Any suggestion

I have an Ipod touch 2nd generation with version 4.2.1 IOs and it is no longer recognized as a device when I plug into my computer. This means I can not change synch settings - any ideas on what I need to do ?

See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

AP350 IOS and vxworks compatibility

Similar Messages

Maybe you are looking for