AP541n with 2504 controller how to

     is there a step by step guide on how to manage AP541n with a 2504 controller?
I have done the initial config on the 2504 but somehow the AP does not join and i can not find what would be a correct setting for the AP. How does that work anyway. In all documentation i found the AP somehow finds the controller, but in my case it does not.                  

Hello Frank,
I recently retired a number of 541's because they do not support an enterprise wireless configuration like you are attempting.  Between themselves they can form a cluster but they are not able to join a with a controller.
You will need new access points to use with your WLC.

Similar Messages

  • Cant Connect Cisco AIR-CAP 3602 with 2504 controller

    Im trying to have one of our APs join our controller. No matter what I do, i cant get it to join the controller.
    The controller has the right OS, I had to upgraded it 7.4 to support the 3600...
    Both the controller and the AP has the same time and date.
    But Im getting this from my AP:
    *Oct 30 14:49:26.043: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Oct 30 14:49:26.055: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Oct 30 14:49:26.055: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Oct 30 14:49:26.067: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 30 14:49:26.083: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Oct 30 14:49:27.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Oct 30 14:49:27.095: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Oct 30 14:49:27.103: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Oct 30 14:49:28.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Oct 30 14:49:28.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Oct 30 14:49:28.131: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Oct 30 14:49:28.139: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Oct 30 14:49:28.147: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Oct 30 14:49:29.131: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Oct 30 14:49:29.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Oct 30 14:49:29.167: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 30 14:49:30.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Oct 30 14:49:36.083: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Oct 30 14:49:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.50 peer_port: 5246
    *Oct 30 14:49:36.411: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.50 peer_port: 5246
    *Oct 30 14:49:36.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50
    *Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.50
    Anyone can help me please?
    Thanks....

    AP is connected directly to one of the ports on the 2504 controller.
    I can move it to a POE switch, if needed.
    Here is the output after I boot up the AP:
    IOS Bootloader - Starting system.
    flash is writable
    FLASH CHIP:  Macronix Mirrorbit (00C2)
    Xmodem file system is available.
    flashfs[0]: 43 files, 9 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 16767488
    flashfs[0]: Bytes available: 15230464
    flashfs[0]: flashfs fsck took 16 seconds.
    Reading cookie from SEEPROM
    Base Ethernet MAC address: 4c:00:82:77:32:7b
    Ethernet speed is 1000 Mb - FULL Duplex
    Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1"...###########################
    File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
    executing...
    Secondary Bootloader - Starting system.
    Xmodem file system is available.
    flashfs[0]: 43 files, 9 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 16767488
    flashfs[0]: Bytes available: 15230464
    flashfs[0]: flashfs fsck took 8 seconds.
    Base Ethernet MAC address: 4c:00:82:77:32:7b
    Boot CMD: 'boot  flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1;flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1'
    Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1"...###############################
    File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Tue 30-Jul-13 22:57 by prod_rel_team
    Initializing flashfs...
    flashfs[3]: 43 files, 9 directories
    flashfs[3]: 0 orphaned files, 0 orphaned directories
    flashfs[3]: Total bytes: 31739904
    flashfs[3]: Bytes used: 16767488
    flashfs[3]: Bytes available: 14972416
    flashfs[3]: flashfs fsck took 8 seconds.
    flashfs[3]: Initialization complete.
    flashfs[4]: 0 files, 1 directories
    flashfs[4]: 0 orphaned files, 0 orphaned directories
    flashfs[4]: Total bytes: 11999232
    flashfs[4]: Bytes used: 1024
    flashfs[4]: Bytes available: 11998208
    flashfs[4]: flashfs fsck took 1 seconds.
    flashfs[4]: Initialization complete.
    Copying radio files from flash: to ram:
    Copy in progress...CCCCC
    Copy in progress...CCC
    Copy in progress...CCCC
    Copy in progress...CCCC
    Copy in progress...CC
    Uncompressing radio files...
    ...done Initializing flashfs.
    Radio0  present 8764 8000 0 A8000000 A8010000 0
    Rate table has 244 entries (64 SGI/104 BF variants)
    Radio1  present 8764 8000 0 88000000 88010000 4
    Radio2 not present 0 0 0 0 0 8
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP3602I-A-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
    Processor board ID FTX1731GQYY
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.5.102.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 4C:00:82:77:32:7B
    Part Number                          : 73-14521-02
    PCA Assembly Number                  : 800-37501-02
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC17273HG4
    Top Assembly Part Number             : 800-35852-02
    Top Assembly Serial Number           : FTX1731GQYY
    Top Revision Number                  : C0
    Product/Model Number                 : AIR-CAP3602I-A-K9
    % Please define a domain-name first.
    Press RETURN to get started!
    *Mar  1 00:00:11.355: FIPS IOS test Image Checksum successful
    *Mar  1 00:00:11.355: FIPS IOS test Crypto RNG DEK Key Test successful
    *Mar  1 00:00:11.355: FIPS IOS test SHA-1 successful
    *Mar  1 00:00:11.355: FIPS IOS test HMAC-SHA1 successful
    *Mar  1 00:00:11.355: FIPS IOS test AES CBC 128-bit Encrypt successful
    *Mar  1 00:00:11.355: FIPS IOS test AES CBC 128-bit Decrypt successful
    *Mar  1 00:00:11.355: FIPS IOS test IOS AES CMAC Encrypt successful
    *Mar  1 00:00:11.355: FIPS IOS test IOS CCM Encrypt successful
    *Mar  1 00:00:11.355: FIPS IOS test IOS CCM Decrypt successful
    *Mar  1 00:00:11.387: FIPS IOS test RSA Signature Generation successful
    *Mar  1 00:00:11.391: FIPS IOS test RSA Signature Verification successful
    *Mar  1 00:00:11.391: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:11.391: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
    *Mar  1 00:00:11.847: Registering HW DTLS
    *Mar  1 00:00:14.647: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:18.327: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 0 successful
    *Mar  1 00:00:18.327: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 0 successful
    *Mar  1 00:00:18.327: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 0 successful
    *Mar  1 00:00:18.327: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 0 successful
    *Mar  1 00:00:18.327: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:24.451: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 1 successful
    *Mar  1 00:00:24.451: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 1 successful
    *Mar  1 00:00:24.451: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 1 successful
    *Mar  1 00:00:24.451: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 1 successful
    *Mar  1 00:00:24.451: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
    *Mar  1 00:00:26.811: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Tue 30-Jul-13 22:57 by prod_rel_team
    *Mar  1 00:00:26.811: %SNMP-5-COLDSTART: SNMP agent on host AP4c00.8277.327b is undergoing a cold start
    *Jul  4 23:55:50.035: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul  4 23:55:50.035: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Jul  4 23:55:50.051: %PARSER-4-BADCFG: Unexpected end of configuration file.
    lwapp_crypto_init: MIC Present and Parsed Successfully
    *Jul  4 23:55:50.191: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Jul  4 23:55:50.855: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
    *Jul  4 23:55:51.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Jul  4 23:55:51.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul  4 23:55:51.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jul  4 23:55:53.319: FIPS HW test SHA-1 successful
    *Jul  4 23:55:53.319: FIPS HW test HMAC-SHA1 successful
    *Jul  4 23:55:53.319: FIPS HW test AES CBC 128-bit Encrypt successful
    *Jul  4 23:55:53.319: FIPS HW test AES CBC 128-bit Decrypt successful
    *Jul  4 23:55:53.819: FIPS HW test SHA-1 successful
    *Jul  4 23:55:53.819: FIPS HW test HMAC-SHA1 successful
    *Jul  4 23:55:53.819: FIPS HW test AES CBC 128-bit Encrypt successful
    *Jul  4 23:55:53.819: FIPS HW test AES CBC 128-bit Decrypt successful
    *Jul  4 23:55:53.819: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed
    *Jul  4 23:55:53.819: DPAA Initialization Complete
    *Jul  4 23:55:53.819: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
    *Jul  4 23:55:54.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance
    *Jul  4 23:56:13.191: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Jul  4 23:56:14.279: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul  4 23:56:15.279: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul  4 23:56:15.371: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jul  4 23:56:16.371: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jul  4 23:56:18.895: Logging LWAPP message to 255.255.255.255.
    *Jul  4 23:56:23.627: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.1.150, mask 255.255.240.0, hostname AP4c00.8277.327b
    Translating "CISCO-CAPWAP-CONTROLLER.pti.local"...domain server (10.3.1.32)
    *Jul  4 23:56:34.559: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Jul  4 23:56:34.567: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.pti.local
    *Jul  4 23:56:44.567: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Oct 30 15:05:13.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.50 peer_port: 5246
    *Oct 30 15:05:13.411: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.50 peer_port: 5246
    *Oct 30 15:05:13.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50
    *Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.50
    *Oct 30 15:05:18.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50

  • SSID/VLANs for Guest/Staff with 3600 and 2504 Controller

    We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall.  We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID.  Any pointers to documentation on how to configure?

    in the WLAN configuration, you select what interface you want it to be linked to.
    In the Controller Tab, on the left, go to interfaces.  This is where you create teh interface name, set the VLAN,and the IP address.
    Steve

  • Config storage confusion 2504 controller with CAP702I

    HI all,
    I've been tasked with the rollout of the above mentioned hardware, and I've managed to get so far, but it seems I cannot do a 'copy running-config startup-config' on the CAP702I Aironet access points.
    ive got then registered with the controller and radios turned on but the problem is that it the power is cycled the radios turn off, I can SSH into each AP and manually turn them on and it works all fine except I shouldn't need to do that.
    If anyone could give me a clue as to how to change the ap config to either store the config with radios enabled on restart on the device itself or guide me through storing the config on the 2504 controller and pointing to it on the ap devices for their startup, it would be much appreciated.

    So simply wireless clients are not getting ip address from the DHCP scope defined for them on AD DHCP server.
    few  facts about DHCP handling on WLC:
    - With DHCP proxy enabled , the controller acts as relay agent.
    Simply you configure primary or may be secondary DHCP server under the interface config.
    When the client starts the DHCP process the controller will rekay the clients DHCP packets
    in unicast form.
    - With DHCP proxy disabled , the controller will not intervene at all, and the client traffic will be sent
    as broadcast. If the DHCP server is on different VLAN , you have to configure relay agent under the gateway
    of the client vlan so that it can reach the DHCP server.
    Please make sure to rate correct answer

  • How do I create a track with just controller MIDI data in it?

    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it. 
    Ideas?
    Thanks
    -Mike

    Soniq2 wrote:
    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    Let me qualify, I'm using Logic 9, not upgrading for various reasons.
    Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school)  Here's an example of an external instrument setup in the Environment.
    A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names).  This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

  • I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
    http://www.logitech.com/en-us/support/gamepad-f310?crid=411
    I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

  • There is a feature on the Ad on using iPad with apple tv as a dual screen such as the iPad as agame controller, how is this being set up or done?

    There is a feature on the Ad on using iPad with apple tv as a dual screen such as the iPad as agame controller, how is this being set up or done?

    This is something the app developer enables within airplay mirroring.
    There is nothing you can do to enable that.
    If you are unsure how to enable mirroring
    http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

  • New bought 2504 Controller not copatible with 1702 APs

    Hi!
    Just got a 2504 Controller with 1702 APs, which are not joining the controller by known reasons.
    (Cisco Controller) >*spamApTask1: Dec 16 22:20:10.288: f0:7f:06:c0:55:80 ApModel: AIR-CAP1702I-E-K9
    *spamApTask1: Dec 16 22:20:10.288: Unknown AP type. Using Controller Version!!!
    *spamApTask1: Dec 16 22:20:10.289: f0:7f:06:c0:55:80 ApModel: AIR-CAP1702I-E-K9
    *spamApTask1: Dec 16 22:20:10.289: Unknown AP type. Using Controller Version!!!
    *spamApTask1: Dec 16 22:20:16.135: fc:5b:39:6e:26:9c ApModel: AIR-CAP1702I-E-K9
    But now I have to buy a SmartNET Subscription to get the bug-free Software for my controller, because software problems are not covered in the warranty? Is there any other Solution?
    New controller running on 7.6.130.0
    Regards
    Alfred

    Well that is too bad.  Maybe ask the company whom you bought the WLC or if you have a Cisco SE to provide you with the code. The only other option is to return it and order the WLC with v8.0, but you will be stuck on that not so good code. The 2504 w/5 AP license, you can find a SMB smartnet for cheap that can give you access to the image download. It's really up to you, but the v8.0 that is currently out is the first version and... well, do I have to say more. I won't use that version, and my customers whom have had to go with that version because of access point support is not too happy to say the least. When the newer version comes out, they will have to upgrade. 
    -Scott

  • How Labview can interface with RC controller

    I am tasked by my supervisor to find out the different interface Labview can use with RC controller. 
    I am currently new to Labview, therefore it would be great if anyone can give me some inputs about it.
    Thanks a lot  

    Hi there
    In order for me to transfer my Labview data from my PC to a Futaba T10CAP controller (http://www.astramodel.cz/manualy/futaba/futaba_10c​p_eng.pdf), I will need a hardware to do the linkage. 
    PCTx (http://www.endurance-rc.com/pctx.php) is one of the hardware device that enables me to do such a thing but their Labview demo problems doesn't work on the PCTx. Therefore I am looking for an alternative hardware solution where my Labview can interface with the RC controller. 
    Welcome any input! Thanks and regard =) 

  • 2504 controller and RADIUS security problem

    I am trying to congure a RADIUS server and the 2504 controller, but have a problem with the types of security. On the controller I have the choice of WPA+WPA2 but on RADIUS server I have WPA-Enterprise (PEAP) or smat card. How do I get the same security on both of them? I am very frustrated with this!
    TIA,
    Eric

    In all the reading and videos and help from you here in this forum I have concluded that:
    1. There are 3 places I need to have authentication congfigured.
       a. WLC
       b. NPS
       c. Group Policy
    Here is how I have it setup ( still not working )
    What am I missing or doing wrong here? I am so @#&*^&*)()*> frustrated.
    TIA,
    Eric

  • Issue with 2504 WLC and 2602 AP. need help please.

    Somehow the AP does not associates with the 2504 controller.
    What could possibily be the issue.
    Thanks in advance.
    Anyway,  Here is the log from the AP.
    AP log
    ===========================================================
    *Mar  1 00:30:35.551: %CAPWAP-5-DHCP_OPTION_43: Controller address 192.168.120.4 obtained through DHCP
    *Mar  1 00:30:35.551: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'SNGNY-WLC1'running version 7.0.220.0 is rejected.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.120.4
    ===========================================================
    show version output from the Access Point
    =========================================================
    AP0006.f6ec.be2a#show ver
    Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Tue 11-Dec-12 00:07 by prod_rel_team
    ROM: Bootstrap program is C2600 boot loader
    BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
    AP0006.f6ec.be2a uptime is 33 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    --More--
    *Mar  1 00:33:46.071: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
    *Mar  1 00:33:46.171: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.120.98, mask 255.255.255.0, hostname AP0006.f6ec.be2a
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP2602I-A-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
    Processor board ID FGL1704ZC0Q
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.4.1.37
    1 Gigabit Ethernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:06:F6:EC:BE:2A
    Part Number                          : 73-14588-02
    PCA Assembly Number                  : 800-37899-01
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC165188Y4
    Top Assembly Part Number             : 800-38356-01
    Top Assembly Serial Number           : FGL1704ZC0Q
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-CAP2602I-A-K9  
    Configuration register is 0xF
    ========================================================

    Blake's right.  Your WLC is running 7.0.X code which does not support the AP2600.  Check the Release Notes and look under Software Release Support for Access Points to determine what suitable firmware your WLC can support your AP.

  • What's that effect with MIDI? How to make it works on Logic Pro?

    Hey guys,
    Look at this video at 6:00.
    http://www.youtube.com/watch?v=vUsq16D7-KE&feature=uploademail
    How to make something like that on Logic? Guy uses Logic for sure, I watched other videos.

    Look at the time at 6:00. He does something (I don't know how to call it) with sliders on his Akai MPD. It's not a sample it is some effect in Logic, or some option in Logic which you can do with MIDI Controller.

  • Capture Now with Non-Controllable Device and Timecode from deck

    Hi,
    Trying to replace a windows laptop using premiere during our events.
    The mentioned system will allow me to get audio/video/timecode all through firewire from the deck AND allow me to "capture now" as a non-controllable device.
    I have not been able to find out how to do this with FCP6. I am able to get the timecode I need, but only with the "controllable" device settings I have thus far tried, at which point a "capture now" gives me an error message stating that the tape has ran out (or something of the sort)
    With "Non-Controllable Device" selected, I can "capture now" but the slot where the deck's timecode had been located is completely gone and no timecode was recorded on any of the test clips I tried.
    Thanks,
    Jeff

    Hi -
    I'm confused.
    The DSR 45A only has one firewire port, if you are plugging your computer into that to source the video, where is the video and timecode source feeding the DSR-45A coming from?
    Within the DSR 45A there are internal menu selections that specify the timecode behavior of the DSR-45A, are these menu settings correct?
    If you load a pre-recorded tape into the DSR-45A can you control the deck, and successfully capture from it as a controlled device from your FCP computer?
    You said:
    we have main deck, a backup deck and a dvr deck recording the primary feed. the capture now stuff is extra bonus!
    What are the formats of these decks? Is the timecode feeding the DSR-45A coming from one of them?
    Thanks
    MtD

  • 2504 controller died

    Anyone ever had an online 2504 controller crash after upgrade to the point where even console port does not put anything out? Perfectly working 2504 running 7.0.116 ran upgrade through web GUI to 7.2. GUI showed perfect transfer, save etc... Asked for save before reboot. Select yes. Controller reboot and now it sits with following status lights:
    Power-green
    SYS - amber blinking
    ALM - amber solid
    Nothing out of console
    Thx //art
    Sent from Cisco Technical Support iPhone App

    Thanks! I've done many up and down on different platforms and I would have bet a paycheck on consistent upgrades.....until now. Even when you use the wrong software, bad transfer...these devices tell you. This one told me everything was good up until it said you need reload. Save and reload and it never came back. NOTHING on console. Never seen that before.
    Thanks again Scott. Appreciate your support in this community.
    //art
    Sent from Cisco Technical Support iPhone App

  • SoundBlaster Audigy 2 ZS With Remote Controller RM-1500

    7SoundBlaster Audigy 2 ZS With Remote Controller RM-500N Hi, i got a computer here SCALEON X (fujitsu-siemens) and it has a SoundBlaster Audigy 2 ZS in it. So with it i got this RM-500 Remote Control, i cant get this to work. Iv been downloading alot of drivers today but i cant get it work, am getting alot of errors while trying to isntall it sais the drivers aint compibale with the OS (operating system) so can anyone that are more familier with this soundcar help me get correct drivers for my soundcard?
    The information i got about this system are:
    Soundcard: Soundblaster Audigy 2 ZS
    Remote Control: CREATIVE RM-500
    Operating System: Windows XP home edition (SP2)
    If you need to know something more, please let me know.
    Thanks!
    //A soundless man.

    I
    The result of the last install: Crashed with blue screen, Two lines are in the messages, that are not part of the explanation, on how to fix the problem:
    (I took a photo, but my just missed, so all the text is washed, but readable: The unrecognised letter replaced with ?)
    I?Q?_NOT_LESS_OR_EQUAL
    (Propably IRQA or IRQE)
    Thecnical Information:
    *** STOP: 0x0000000A (0x00000000, 0x00000002, 0x0000000, 0x82C6870F)
    Source:?? Microsoft-Windows-WER-SystemErrorReporting
    D?tum:?? 2009.09.26. :54:43
    Event ID:00
    Description:
    Tells that the action was the code, that I was wrote above, and the report id is 092609-33992-0.
    Event in XML:
    <Event xmlns="<a rel="nofollow" href="http://schemas.microsoft.com/win/2004/08/events/event"]http://schemas.microsoft.com/win/2004/08/events/event[/url]">
    ? <System>
    ? rovider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-863-84FA6C525952}" EventSourceName="BugCheck" />
    ? <EventID Qualifiers="6384">00</EventID>
    ? <Version>0</Version>
    ? <Level>2</Level>
    ? <Task>0</Task>
    ? <Opcode>0</Opcode>
    ? <Keywords>0x80000000000000</Keywords>
    ? <TimeCreated SystemTime="2009-09-26T09:54:43.000000000Z" />
    ? <EventRecordID>6322</EventRecordID>
    ? <Correlation />
    ? <Execution ProcessID="0" ThreadID="0" />
    ? <Channel>System</Channel>
    ? <Computer>XXX</Computer>
    ? <Security />
    ? </System>
    ? <EventData>
    ? <Data Name="param">0x0000000a (0x00000000, 0x00000002, 0x0000000, 0x82c6870f)</Data>
    ? <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    ? <Data Name="param3">092609-33992-0</Data>
    ? </EventData>
    </Event>
    After restart, the bios test freezez in the final frazes, and force shutdown and restart, functions well again. The sound card is in while booting.
    No driver confilcts.
    I've uploaded the dmp file here: <a rel="nofollow" href="http://pantonite.extra.hu/bin/MEMORY.DMP"]http://pantonite.extra.hu/bin/MEMORY.DMP[/url]

Maybe you are looking for