AP801 admin status is disable automatically after router reload

We've got cisco 887VGW with wireless AP801GN and registering to the controller 7510,
ap801 admin status is disable automatically after router reload.
Is there any opportunity to fix it?
AIR-CT7510-K9 os version: 7.6.100

(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.100.0
RTOS Version..................................... 7.6.100.0
Bootloader Version............................... 7.3.101.0
Emergency Image Version.......................... 7.3.101.0
Build Type....................................... DATA + WPS
System Name...................................... CNDGIDCWLC01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
Redundancy Mode.................................. SSO (Both AP and Client SSO)
IP Address....................................... 10.15.131.46
System Up Time................................... 3 days 3 hrs 40 mins 22 secs
System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... Multiple Countries:CN,HK,TH,US
--More-- or (q)uit
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... 10 to 38 C
Internal Temperature............................. +22 C
Fan Status....................................... OK
RAID Volume Status............................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 6
Burned-in MAC Address............................ 64:9E:F3:65:2A:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 300
(Cisco Controller) >
Cisco IOS Software, AP801 Software (AP801-K9W8-M), Version 15.2(4)JB3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 18-Dec-13 21:56 by prod_rel_team
ROM: Bootstrap program is AP801 boot loader
BOOTLDR: AP801 Boot Loader (AP801-BOOT-M) Version 12.4(23c)JX, RELEASE SOFTWARE (fc1)
NST6839 uptime is 4 hours, 32 minutes
System returned to ROM by power-on
System image file is "flash:/ap801-k9w8-mx.152-4.JB3/ap801-k9w8-mx.152-4.JB3"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AP801GN-A-K9 (PowerPC 8343) processor (revision B0) with 49142K/16384K bytes of memory.
Processor board ID FGL164624AL
PowerPC 8343 CPU at 400Mhz, revision number 0x0031
Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface
1 802.11 Radio
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 70:CA:9B:2F:49:30
Part Number                          : 73-11027-11
PCA Assembly Number                  : 800-28807-11
PCA Revision Number                  : B0
PCB Serial Number                    : FOC1634C1G6
Top Assembly Part Number             : 800-33059-04
Top Assembly Serial Number           : FGL164624AL
Top Revision Number                  : B0
Product/Model Number                 : AP801GN-A-K9
Configuration register is 0xF

Similar Messages

AP Admin Status Getting Disabled Automatically After Upgrade to 7.4

Hi,
We were using wlan controller 5508 firmware 7.0.235 and decided to upgrade our firmware because we wanted to use some new AP models. We upgraded the controller to the 7.4.110.0 and after that a problem started. Some of the AP are becoming ADMIN DISABLED and they are getting down, this is happening all day and random times. I need to manually getting them admin enabled so we can use them. What can cause this problem?
This happens in APs in Flexconnect mode.
Regards.
Wlan Cont
AIR-CT5508-K9

Problem happens with these AP : AIR-LAP1041N-E-K9
We have many AP it is very difficult which AP to debug, everytime different AP is getting disabled. I've also configured syslog but also I do not receive any syslog message to my syslog server. Should I upgrade to 7.5?
Log from AP after disabled...
    Console logging: level debugging, 39 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
                     filtering disabled
    Buffer logging: level debugging, 39 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled
    Trap logging: level emergencies, 12 message lines logged
        Logging to 10.0.2.47 (udp port 514, audit disabled,
              link down),
              0 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
        Logging Source-Interface:       VRF Name:
Log Buffer (1048576 bytes):
*Mar 1 00:00:10.770: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.773: *** CRASH_LOG = YES
*Mar 1 00:00:11.073: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: D8:67:D9:FC:00:D6
*Mar 1 00:00:12.424: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:13.507: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:14.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:16.503: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 15.2(2)JB2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 29-Jul-13 12:06 by prod_rel_team
*Mar 1 00:00:16.503: %SNMP-5-COLDSTART: SNMP agent on host Antalya is undergoing a cold start
*Mar 1 00:00:16.570: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:17.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:28.630: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:28.632: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:28.633: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:28.657: %CAPWAP-3-ERRORLOG: Binding Config Initialization failed for binding 1
*Mar 1 00:00:29.190: Starting Ethernet promiscuous mode
*Mar 1 00:00:29.396: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:44.681: Logging LWAPP message to 10.0.2.47.
*Mar 1 00:01:03.711: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:01:13.713: %CAPWAP-3-ERRORLOG: Selected MWAR 'COLINS-WLC'(index 0).
*Mar 1 00:01:13.713: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 21 08:32:29.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.10.10 peer_port: 5246
*Aug 21 08:32:30.063: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.10 peer_port: 5246
*Aug 21 08:32:30.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
*Aug 21 08:32:35.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
*Aug 21 08:32:35.154: Starting Ethernet promiscuous mode
*Aug 21 08:32:37.005: %LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
*Aug 21 08:32:37.025: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Aug 21 08:32:37.224: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller COLINS-WLC
*Aug 21 08:32:37.273: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.276: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.279: ac_first_hop_mac - IP:192.168.31.1 Hop IP:192.168.31.1 IDB:BVI1
*Aug 21 08:32:37.279: Setting AC first hop MAC: 0024.14d9.f118
*Aug 21 08:32:37.965: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Aug 21 08:32:47.905: %CDP_PD-4-POWER_OK: Full power - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED inline power source

IIS Admin Service Disabled on all SCCM 2012 Distribution Points Automatically After few Hours

Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points after few Hours.
Please help and share configuration steps.
Thank you.
Regards,
Faisal Alvi
Regards, Faisal Alvi PPL

That's not something ConfigMgr does. Examine eventlog and see if there are GPOs or whatever is disabling it.
Torsten Meringer | http://www.mssccmfaq.de

My admin status has been changed to standard after the yosemite software update,now i have no admin and can't tso anything as before doing anything it asks for admin username and password,which i don't know as there is no admin!

admin status changed to standard,currently no admin,what to do!?

Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no administrator account exists on the system.
If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always possible.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
          Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
          Select the user account
and select
          System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
Select
           ▹ Restart...
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
           ▹ Log Out...
from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
          Allow user to administer this computer
You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
Credit for this idea to ASC member wessongroup.

SCE 2010 Subscriptions getting disabled automatically

Hi Experts,
we are using SCE 2010 server from last 4 years. Of late i have been noticing that the subscriptions are getting disabled automatically. i manually enabled it after which it sends alerts but after couple of minutes the subscriptions get disabled again.
The database and hard drive spacing is fine. Let me know what could be the possible issue as in the event log i haven't noticed any alerts with regards to this issue.
regards
abubakar
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.

Hi,
When a subscription is created the user who created the subscriptions SID is associated with that subscription. There is a workflow that checks every half hour for SIDs no longer valid. They could be invalid because their accounts access that had been removed,
or possibly because the account has been disabled or deleted. I suggest you re-create the subscription with the current Admin.
Juke Chou
TechNet Community Support

Facing issue while trying to disable automatic discovery of devices through Apple Bonjour

Hi All,
I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour.
Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's auto discovery technology( mdnsresponder ).
We are registering a particular service type by using DNS API "DNSServiceRegister". Service type is getting registered properly and we are able to discovered that particular type of device.
Platform: Windows 7.0 / MAC 10.8
Issue:
But we are facing issue while trying to disable auto discovery of a device programmatically. i.e, unregistered a service reference programmatically from our windows application.
To unregistered a service we are using "DNSServiceRefDeallocate" DNS API. But looks like it is not working properly.
Is this DNS API “DNSServiceRefDeallocate” is correct one to unregistered the service?
Here is the step by step procedure that we are following to de-allocate a service reference:
1.Browsing / Query a service by using service type to get service reference (DNSServiceRef).
2.Get reference socket FD by using DNS API "DNSServiceRefSockFD".
3.Select a socket by using "select" API.
4.Close the socket that we got from step 2 by closesocket().
5.Delete the service reference by using DNS API "DNSServiceRefDeallocate" and service reference from step 1.
Are we missing any step to unregistered a service?
Regards,
Goutam

Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.

How to disable automatic login and to see other accounts?

I bought MacBook Pro Retina with Mac OS X 10.8.2 in a shop, where there already was account "kiosk".
I created new account, gave him Administrator priviliges.
In the Preferences / Users & Groups I see kiosk account as "Managed", and my new account as "Admin".
I set:
System Preferences / Security & Privacy / General / Disable automatic login = Checked.
System Preferences / Users & Groups / Login Options / Automatic login = Off.
But still I have two issues:
1) After start the laptop automatically logins into kiosk account, while I explicitly switched off this option
2) Apart from kiosk account, the OS doesn't see any other accounts, for example my new account.
For example, when I changed login shell for kiosk account into /usr/bin/false, I couldn't login at all. The OS said something like, there are no active accounts. So I had to set login shell back to /bin/bash using single-user mode.
The questions are:
How to disable automatic login into kiosk account?
How to see a choice between kiosk account and my new account in the login dialog?
How to delete kiosk account? Currently the delete option is disabled for kiosk in System Preferences / Users & Groups.
So far after laptop start I automatically login into kiosk, then switch into my new account with entering a password, which is weird.
Thanks in advance.

It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
Anton Mironenko wrote:
Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
I hope, it is possible to solve this issue in another way.

Server0 node restarts automatically after 10 minutes...

Hello Portal ppl..
I have encountered a troublesome porblem at My portal server.
Server0 node restarts automatically after 10 minutes...showing yellow status..
Following is developer trace of server0 node:
[Thr 373752] Tue Dec 30 12:52:01 2008
[Thr 373752] JLaunchISetClusterId: set cluster id 12403050
[Thr 373752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 373752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 377684] Tue Dec 30 12:53:00 2008
[Thr 377684] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Following is developer trace of jcontrol.exe node:
[Thr 379212] Tue Dec 30 12:51:37 2008
[Thr 379212] JControlICheckProcessList: process SDM started (PID:379984)
[Thr 379212] Tue Dec 30 12:51:57 2008
[Thr 379212] JControlICheckProcessList: process server0 (pid:380868) died (RUN-FLAG)
[Thr 379212] JControlIResetProcess: reset process server0
[Thr 379212] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID12403050 1230620106 -bz D:\usr\sap\E70\SYS\global
JControlStartJLaunch: program = D:\usr\sap\E70\JC01\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\E70\JC01\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
-> arg[02] = -DSAPINFO=E70_01_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\E70\JC01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_359972
-> arg[06] = -nodeName=ID12403050
-> arg[07] = -jvmOutFile=D:\usr\sap\E70\JC01\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\E70\JC01\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\E70\JC01\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\E70\JC01\j2ee\os_libs;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
[Thr 379212] JControlICheckProcessList: process server0 started (PID:358680)
Please Help.....

Hi,
To see the log files,
You can create an iView based on the below par file
com.sap.portal.runtime.admin.logviewer.
Use the component default in the PAR File.
Preview this iview to see the console for logs.
And regarding your error,Please check if the there is free space in the Hard Drive of USR folder
Also recheck the JVM settings according to Note 723909 - Java VM settings for J2EE 6.40/7.0.
Based on the 32 bit or 64 bit OS,the parameter values differ
Following are the Parameters for 64 bit OS.
-XX:MaxPermSize=512M
-XX:PermSize=512M
-Xmx2048M
-Xms2048M
-XX:NewSize=320M
-XX:MaxNewSize=320M
Hope it helps.
Cheers,
Santhosh

Cannot disable automatic attachment preview in Mavericks Mail?

Hello All,
I noticed after upgrading to Mavericks that Apple Mail started automatically previewing attachments again... I had disabled this in previous versions of OS X. I tried to disable this again in the terminal using:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
But after re-starting Mail, attachments are being automatically previewed again.
I consider this a security issue so I would like to disable automatic attachment previewing as soon as possible. Has anyone been able to do this with the Mail included with Mavericks yet?

Just a basic examplo: getting an email with an open image, that the 2 people around me can immediately see, can pose a serious security for anything I'm doing with my Mac!
So, you see, SECURITY is much more than a mere technical problem!
Cheers
That's a privacy problem, not a security problem.
If you are receiving images in emails that the others arround you are not qualified to see, your office setup is the security problem, not Mail.
Use a different email client that gives you the option. I have no idea what those are, though.

How do I restore my Admin status for a program in Applications using 10.6.8

How do I restore my Admin status for a program in Applications using 10.6.8?

Is this the file that does not have the desired priveleges? I think that's correct. If so, then open Terminal in the Utilitie folder. At the prompt enter:
sudo chown -Rf root:admin [dragged file goes here]
Leave a space after "root:admin" and drag the file you need to change into the Terminal window. Press RETURN. You will be asked to enter your admin password. It will not be echoed to the screen so type carefully. Press RETURN again.
This will change the priveleges of the file to the default for the Applications folder.

Satellite Pro M70 can't refresh IP address after router reboot

My Laptop isn't able to repair it's wireless connection if I reset the router. I have to power cycle the laptop to get it to connect again as it always gets stuck on getting network address... Any known issues about this with software patch or anything...?
Thanks
Huw D.

Hello Huw
As far as I know there are no known issues with WLAN connection and I dont know exactly what happen with your WLAN connection. After router reboot try to disable WLAN card for a short time, enable it again and try to establish connection again.
The settings are the same and nothing must be changed.
Bye

When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

just an update on the situation....
the problem is solved. after trying everythng, at last i did a reset on my linksys e3200 router - and BANG!!!
airplay works.
hope this helps someone else.

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

How to create Oppertunity doc automatically after lead in CRM SALES

Hi,
how to create oppertunity doc automatically after creating lead in crm sales
Thanks7regards
kishor kumar

Hi Kishore,
Create SAP Business Workflow for Opportunity from Lead
Use
A lead is a business transaction that describes, stores, updates, and manages the potential business interests of a business partner, and the interactions based on this over a period of time. The goal is to provide the "sales" area with the information gained in the lead, in order that it can be used as a basis for deciding whether to create an opportunity.
The information gathered in the lead is transferred to the "sales" area via the workflow "create opportunity from lead".
In the workflow, you decide whether the opportunity is generated manually or automatically.
If the lead-specific attributes Priority and Lead group fulfill specific criteria, the workflow automatically generates an opportunity. Otherwise, the workflow sends a work item to the sales employee responsible, for manual creation. Once he has checked the data in the lead, the sales employee can either reject this lead or create an opportunity from it.
The workflow is automatically started when the lead is saved.
The sales representative entered in the lead is first taken as the sales employee whose task it is to create the opportunity based on the information in the lead. This person can be determined using partner determination in CRM, depending on the prospect in the lead, and can, for example, be a manager of a sales area. If no sales representative is entered, the workflow takes an organizational unit assigned in the workflow template, and sends the work item to all users assigned to the organizational unit.
Prerequisites
u2022     The type linkage for the start events AttributeChanged and SetErrorFree for the workflow WS10001011 are deactivated as a standard procedure, and, if you wish to start the workflow template, they have to be activated again in Customizing. The workflow task processors must also be maintained. In Customizing, choose Customer Relationship Management  Basic Functions SAP Business Workflow  Perform Task-Specific Customizing.
u2022     The workflow template uses the user statuses SAAC (accepted by sales) and SARE (rejected by sales) of the status profile CRMLEAD. If you have defined several user statuses, the data flow for task TS10008154 (set status) must be adapted accordingly.
u2022     When the opportunity is created, the workflow template uses the opportunity transaction type OPPT. If you have defined several transaction types for the opportunity, the data flow for task TS10008151 (create opportunity) must be adapted accordingly.
u2022     If the sales employee rejects the lead, the workflow resets the qualification level to value 02 (warm). If you have specified your own qualification levels in Customizing, you need to adapt the data flow for task TS10007918 (change qualification level) accordingly.
Process of Workflow WS10001011 (create opportunity from lead)
The workflow "create opportunity from lead" is started when a lead is saved with qualification level Hot and status Error-free. The system uses the lead-specific attributes Priority and Lead group to check whether an opportunity can be automatically created, or a sales employee first needs to decide. If the sales employee decides that an opportunity can be created, the lead status is set to "accepted by sales", and an opportunity is created in the background. If necessary, this is forwarded to the sales employee to check. If the sales employee rejects the lead, the lead status is set to "rejected by sales", and the initiator is informed by mail.
The workflow is ended if no opportunity is created and
o     the lead is deleted or
o     the qualification level of the lead is changed to a value other than Hot or
o     the status of the lead is changed to a value other than Error-free.
Path for the workflow:
==> SPRO
==> Customer Relationship Management
==> Basic Functions
==> SAP Business Workflow
==> Perform Task-Specific Customizing
Select the Application Componenet Abbrevation as CRM and expand
Select CRM-BTX and expand
Select CRM-BTX-LEA and click on Activate event linking and acivate workflow WS 10001011
It may helps you
Regards
Narayana

IE, Disable 'Automatically Detect Settings' Via GPO

Hi guys,
We have recently been having a small problem with IE, whereby the 'automatically detect settings' check box will get ticked - resulting in our users not being able to traverse our proxy server.
I use the User Configuration > Policies > Windows Settings > IE Maintenance > Connection to set up our proxy settings, however I can't see an option to explicitly disable the 'automatically detect settings' check box.
Is this located somewhere else in an admin template, or am I simply missing an option that is right in front of me?
Thanks.
Glen

here is a script that does the trick: source
http://www.craig-tolley.co.uk/2011/08/30/disable-automatically-detect-settings-in-internet-explorer/
Option Explicit
On Error Resume Next
'Create a constant for the HKEY_CURRENT_USER object
Const HKCU = &H80000001
'Define variables
Dim strComputer
Dim strRegistryKey
Dim objRegistry
Dim strRegistryValue
DIm binValue
strComputer = "."
strRegistryKey = "Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections"
strRegistryValue = "DefaultConnectionSettings"
'Connect to the Registry
Set objRegistry = GetObject("winmgmts:\\" & strComputer & "\root\default:StdRegProv")
'Retrieve the current settings.
objRegistry.GetBinaryValue HKCU, strRegistryKey, strRegistryValue, binValue
'Change the 'Automatically detect settings' box to unticked
binValue(8) = 05
'binValue(8) = 13 - Enable this line to check the box instead of uncheck
'Save the changes
objRegistry.SetBinaryValue HKCU, strRegistryKey, strRegistryValue, binValue

AP801 admin status is disable automatically after router reload

Similar Messages

Maybe you are looking for