Apache + 2 WebLogic = Broken
I have two weblogic servers: one is running on port 7101 the other is
on 7555. I want to configure apache to route any url starting with /URL
to the 7555 server and any url starting with /test to go to the 7101
server. Is this possible on apache? If so, can you provide an example
of the httpd.conf file?
[bryon.vcf]
Hi,
I am doing a evaluation and I have installed Apache 2.0.32 (latest beta) on Windows
2000 and am using WebLogic Server 6.1SP1. However when I tested the configuration,
I get this error saying:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.so into server:
The specified procedure could not be found.
This is how I configured the httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
TIA for any pointers to get it to work.
Cheers
Arthur
"Eric Mountain" <[email protected]> wrote:
Apache 2.0 is not yet officially supported on Windows as Apache2 has
not
been production-released. So BEA cannot certify Apache2 with WLS of
course.
You need Apache 2.0.16 (alpha) to work with the modules delivered with
WLS
6.1 SP1 and SP2.
I got it working more or less, but it seems to be a bit flakey... i.e.
my
1st request works OK, but none after that.
I have been told that SP3 will support Apache2 on Windows "for real"
- of
course, this is assuming Apache release Apache2 on schedule I suppose.
:E
Robert Patrick wrote in message <[email protected]>...
It looks like the "Platform Support" snippet has not been updated butif
you
look below, you will see that the plug-in for Apache 2.0 only is supportedon
Windows...
Michael Halmich wrote:
It seems that the setup is supported based on this url:
http://edocs.bea.com/wls/docs61/adminguide/apache.html
... no: "The Apache HTTP Server Plug-In is supported on Linux, Solaris
and
HPUX11 platforms."
http://edocs.bea.com/wls/docs61/adminguide/apache.html#112697
Similar Messages
-
How to configure apache and weblogic in windows 2000
i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support -
Nedd to configure apache-bea weblogic plugin for apache2 on solaris 10
Hi,
I have an apache server and a bea weblogic application server. For security reasons, I wold like to configure a bea plugin on the apache server to redirect the client http/https requests from the apache2 server to bea application server.
I have gone through the bea documentation and configure my apache2 httpd.conf as follows
LoadModule weblogic_module modules/mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicHost myweblogic.server.com
WebLogicPort 7001
MatchExpression *.jsp
</IfModule>
<Location /weblogic>
WebLogicHost myweblogic.server.com
WebLogicPort 7001
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
Then Restarted the apache2 and tryied to acces bea application through http://myweblogic.server.com/weblogic/
and http://myweblogic.server.com/something.jsp
It did not work
httpd is started propery.
Any help would be highly apreciated
Many Thanks
Ushas SymonThe Web server plug-ins do not natively support outbound SSL connections
yet(i.e. SSL from the plug-in to WebLogic). This is a feature for version
6.0. You can use SSL from the browser to Apache or from the browser to
WebLogic directly.
The majority of our customers use strict firewall rules to protect the
traffic between Apache and WebLogic. If they are paranoid, they use an SSL
proxy or a VPN product.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Josh Kwan" <[email protected]> wrote in message
news:39d4e8a5$[email protected]..
>
Hello,
I want to know how to connect Apache 1.3.12 with mod_ssl to BEA WebLogic5.1.0 on Solaris via HTTPS. I have heard that this can only work over t3...
is that true? If so, how can it be done securely? If that isn't the case,
how can httpd.conf/weblogic.conf be configured on the Apache server to talk
to the WebLogic server on port 7002? Both of the machines I am using are
running Solaris 7 with necessary patches. I have installed SP5 for WebLogic
and I have copied mod_wl.so and mod_wl_ssl.o to the Apache server for
inclusion as modules.
>
The two servers communicate correctly over HTTP, but I want to be able toserve some JSPs via HTTPS from the WebLogic server through the Apache web
server. I have generated all the required CA and server certificates for
each server, and they both individually answer HTTPS requests, but do not
work when an HTTPS request is sent to the Apache server for a JSP that is
served from the WebLogic server. I read somewhere in the documentation for
5.1.0 that WebLogic will communicate via HTTPS to various web and proxy
servers.
>
Any help would be greatly appreciated... thanks!
Regards,
Josh Kwan
Sr. Systems Engineer
iXL -
hi all.
i am using oracle application server 10g R2 over windows server 2003 64bit
but now i planned to go for apache and weblogic server for this i do not have idea that
should i do? plz what softwares are required to use apache and weblogic server with current version
10g R2.?The WebLogic Server (WLS) is a Java container similar to OC4J in Application Server 10g release 2. If you want to use WLS, you will have to upgrade your Application Server 10g installation to Fusion Middleware 11g. The upgrade path typically depends on the products which you are using in 10g, e.g. the upgrade path for SOA is different than the upgrade path for Forms/Reports or Oracle Portal. The [url http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/before_you_begin.htm]Upgrade Planning Guide is a good start.
Thanks,
EJ -
Proxy between Apache and Weblogic
Hi ,
I need to configure a proxy server in between Apache and Weblogic which means not all the requests should go through proxy, only one particular request should go from apache to proxy server and proxy server to Weblogic. Can any one help me how to configure this and how it is going to work.
Regards,
VamseeNot exactly sure.However can we use proxying by MIME type here
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/plugins/apache.html#wp132216
Regards -
Configuring apache and weblogic 7.1
have anyone tried connecting apache and weblogic 7.1. which service pack can be used for this purpose
have anyone tried connecting apache and weblogic 7.1. which service pack can be used for this purpose
-
SSL Connection Configuration between Apache and Weblogic 8,1
I'm currently using Apache web server as a front end server for Weblogic server 8.1 and now i' facing some configuration problem to setting up the SSL connection between this 2 server. When i open my web application page, it shows
Failure of Server Apache bridge
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
and my proxy.log shows:
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL is configured
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL configured successfully
Thu Nov 03 09:36:41 2011 <182413202842013> Using Uri /favicon.ico
Thu Nov 03 09:36:41 2011 <182413202842013> After trimming path: '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> The final request string is '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> SEARCHING id=[ebwdsk298.ebworx.com:7002] from current ID=[ebwdsk298.ebworx.com:7002]
Thu Nov 03 09:36:41 2011 <182413202842013> The two ids matched
Thu Nov 03 09:36:41 2011 <182413202842013> @@@FOUND...id=[ebwdsk298.ebworx.com:7002], server_name=[10.122.50.218], server_port=[80]
Thu Nov 03 09:36:41 2011 <182413202842013> attempt #0 out of a max of 5
Thu Nov 03 09:36:41 2011 <182413202842013> general list: trying connect to '10.122.50.48'/7002/7002 at line 2696 for '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> New SSL URL: match = 0 oid = 22
Thu Nov 03 09:36:41 2011 <182413202842013> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Nov 03 09:36:41 2011 <182413202842013> EINPROGRESS in connect() - selecting
Thu Nov 03 09:36:41 2011 <182413202842013> Setting peerID for new SSL connection
Thu Nov 03 09:36:41 2011 <182413202842013> 0a7a 3230 5a1b 0000 .z20Z...
Thu Nov 03 09:36:41 2011 <182413202842013> Local Port of the socket is 2121
Thu Nov 03 09:36:41 2011 <182413202842013> Remote Host 10.122.50.48 Remote Port 7002
Thu Nov 03 09:36:41 2011 <182413202842013> general list: created a new connection to '10.122.50.48'/7002 for '/favicon.ico', Local port:2121
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Connection]=[keep-alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> URL::sendHeaders(): meth='GET' file='/favicon.ico' protocol='HTTP/1.1'
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-Forwarded-For]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: No session match found
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: No CA was trusted, validation failed
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: DeleteSessionCallback
Thu Nov 03 09:36:41 2011 <182413202842013> ERROR: SSLWrite failed
Thu Nov 03 09:36:41 2011 <182413202842013> SEND failed (ret=-1) at 789 of file ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 790 of ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> Marking 10.122.50.48:7002 as bad
Thu Nov 03 09:36:41 2011 <182413202842013> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 790 of ../nsapi/URL.cpp]: at line 3078
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Closing SSL context
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Error after SSLClose, socket may already have been closed by peer
Thu Nov 03 09:36:41 2011 <182413202842013> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
Can anyone tell me what should i do in order to correct this error? Your help is kindly appreciate!!! Please~1) Is the managed server up?
2) from apache server are you able to bind the managed server port?
3) can you pls send the weblogic ssl configuration? -
Apache and webLogic Communication
Hi
we are deploying new application and client want to have Apache on one server and weblogic on another server.
Can you pls point to any notes/docs which tells how to configure Apache to have as fronend for applications in weblogic.
Thanks
SreeHi
Thanks for the info.
Since we are hosting team we amy not be able to allow/to code. We have existing setup where Oracle HTTP server in DMZ communicates with other report server oc4j using ajp protocol. We are also NOT allowed to use proxy pass.
For a new project we will be using Apache web server in DMZ and weblogic application server inside.
Can you Pls let me know how we can trasfer requestes thru Apache using other protocols like ajp other than proxy.
Thanks -
Apache and weblogic proxying not happening properly
Hi,
I am trying to proxy my request from my apache installation to weblogic installation.
I am able to proxy request to the default page of my application in weblogic.
But when trying to browse through that page I am getting error.
Basically, It tries to listen at 7501 port of my machine(apache machine) only
and is not trying to listen at 80 port of my machineso that it can be proxied
to the 7501 port of weblogic machine.
I am unable to figure out the issue. Maybe u can help me from ur experience.
I get an exception saying:
###<Apr 28, 2003 9:53:47 PM IST> <Warning> <Entitlements> <blrkec09630a> <portalServer>
<ExecuteThread: '10' for queue: 'default'> <kernel identity> <16:b7687ce40e05e9a9>
<402716> <Missing entitlments configuration asset.>
Exception[com.bea.p13n.rules.manager.RuleSetNotFoundException: The rule set with
URI /entitlements/GlobalEntitlements.rls could not be located by the class named
com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.]
at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.getRuleSet(RuleSetPersistenceManager.java:385)
at com.bea.p13n.rules.manager.internal.ContextPool.<init>(ContextPool.java:156)
at com.bea.p13n.rules.manager.internal.ContextPoolFactory.createContextPool(ContextPoolFactory.java:164)
at com.bea.p13n.rules.manager.internal.ContextPoolFactory.getContextPool(ContextPoolFactory.java:223)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getContext(RulesManagerImpl.java:469)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluate(RulesManagerImpl.java:350)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluateRuleSet(RulesManagerImpl.java:148)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl_mcr6qe_EOImpl.evaluateRuleSet(RulesManagerImpl_mcr6qe_EOImpl.java:448)
at com.bea.p13n.entitlements.rolemapper.RoleMapper.mapRoles(RoleMapper.java:179)
at com.bea.p13n.entitlements.accesscontroller.AccessController.isAccessAllowed(AccessController.java:143)
at com.bea.portal.entitlement.util.EntitlementHelper.isAccessAllowed(EntitlementHelper.java:285)
at com.bea.portal.entitlement.util.EntitlementHelper.checkEntitlementInternal(EntitlementHelper.java:231)
at com.bea.portal.entitlement.util.EntitlementHelper.checkEntitlement(EntitlementHelper.java:144)
at com.bea.portal.manager.internal.UserPortalStatePolicy.checkPortletEntitlement(UserPortalStatePolicy.java:636)
at com.bea.portal.manager.internal.UserPortalStatePolicy.generateUserPageState(UserPortalStatePolicy.java:567)
at com.bea.portal.manager.internal.UserPortalStatePolicy.generateUserPortalState(UserPortalStatePolicy.java:293)
at com.bea.portal.manager.internal.PortalManagerDelegateImpl.getUserPortalState(PortalManagerDelegateImpl.java:179)
at com.bea.portal.manager.ejb.internal.PortalManagerBean.getUserPortalState(PortalManagerBean.java:70)
at com.bea.portal.manager.ejb.internal.PortalManagerBean_w6xny9_EOImpl.getUserPortalState(PortalManagerBean_w6xny9_EOImpl.java:370)
at com.bea.portal.appflow.internal.PortalRequestImpl.getPortalState(PortalRequestImpl.java:148)
at com.bea.portal.render.servlets.jsp.PortalRenderHelper.getSelectedSkin(PortalRenderHelper.java:167)
at jsp_servlet._framework._security.__login._jspService(login.inc:11)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:445)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(RequestDispatcherImpl.java:345)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:252)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:178)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:235)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at com.bea.p13n.tracking.clickthrough.ClickThroughEventFilter.doFilter(ClickThroughEventFilter.java:156)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5451)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Regards,
Vinod ThapliyalThe WebLogic Server (WLS) is a Java container similar to OC4J in Application Server 10g release 2. If you want to use WLS, you will have to upgrade your Application Server 10g installation to Fusion Middleware 11g. The upgrade path typically depends on the products which you are using in 10g, e.g. the upgrade path for SOA is different than the upgrade path for Forms/Reports or Oracle Portal. The [url http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/before_you_begin.htm]Upgrade Planning Guide is a good start.
Thanks,
EJ -
Apache with weblogic serveron windows xp.
Hi,
Can you plz tell me how to connect Apache http server to weblogic in the windows
os. The documentation provided is for linux platform. Can someone help me for
windows.
Thanks,
Ankur
Please see the jdbc chapter in the PE 8.0 developer's guide for the correct configuration for MySQL
also make sure you can ping the connectionpool via the cli or the gui -
Apache and Weblogic authentication
Apache 2.0 and WL 8.1 SP6;
Apache redirects to a wl web app and the web app's front page is password protected using Apache's authentication services.
Turns out, the users configured with Apache's 'htpasswd' have to be duplicated in weblogic. Curious to know why this is. There appears to be no documentation of this necessity that I could find.
Any ideas about the configuration principles involved here?
Thanks,
KarolyHi Scott,
The only way it can work is when Apache adds another token to the request
say
MyToken : value
U can create a Custom Identity Asserter to read that token and authenticate the user.
U can find the steps to create custom identity asserter here
http://weblogic-wonders.com/weblogic/2010/03/15/custom-identity-asserter-for-weblogic-server/
HTH,
Faisal -
Using Apache with WebLogic Portal
Hi,
I had a small test WebLogic system working, and just started configuring an Apache server to frontend it, using the WebLogic Apache plugin to connect the two machines.
I did the httpd.conf configurations indicated in BEA's documentation, including the <Location /weblogic>, etc., and I was finally able to get it all working. But, to do this, I found that I had to copy the /features and /images directories from the WebLogic machine to under the /htdocs directory on my Apache machine, and I was wondering if this was "normal" (i.e., was that the correct thing to do)?
Thanks in advance,
Jimhoos,
When I read your msg, I wasn't sure 'where' you meant to try the "/app.portal*".
The Plugin documentation doesn't mention using a wildcard ("*") at all, but I figured I'd try it, and VOILA, it now works.
FYI, here's what I have in my httpd.conf:
# Re-route all /weblogic URLs to the WebLogic Portal via the Apache Plugin
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
# Re-route all /app.portal* URLs (all URLs that start with '/app.portal' or '/app.portal...') to the WebLogic Portal via the Apache Plugin
<Location /app.portal*>
SetHandler weblogic-handler
</Location>
The URL I use to get to my portal initially is:
https://jim.foo.com/weblogic
Thanks for your help! I'll be posting this in the other thread, just for completeness.
Jim -
Apache and Weblogic - Performance issue
Hi Anuj,
This question should be directed to the weblogic.developer.interest.plug-in
group.
Regarding this issue, this is normal -- the access.log for WebLogic shows
the requests from the proxy. But, instead of showing you the IP address of
the proxy server, it instead shows you the IP address of the client. You
can also verify that this is a different request because the connection to
the proxy server used HTTP/1.1, and the connection to WLS used HTTP/1.0 --
this is the protocol that the proxy plug-in uses to communicate with WLS.
So, in summary, there is only one request made by the client per image, and
the plug-in is in turn making a request to WLS for each image.
Dennis Munsie
Developer Relations Engineer
BEA Support
"Anuj Nijhawan" <[email protected]> wrote in message
news:3c20e890$[email protected]..
>
We have a setup with apache acting as web server and BEA as app server.But it
seems both of them are serving images to the web browser at the same time.This
is consuming lots of memory. Can anybody help rectifing this,
here's what each log file's say,
first Apache (access_log) shows that it served it up:
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET /img/divider.gif
HTTP/1.1"
304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/i_user_collection.gif
HTTP/1.1" 304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/sort_last_manual.gif H
Then BEA (access.log) shows it too:
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET /img/divider.gif
HTTP/1.0"
304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/i_user_collection.gif
HTTP/1.0" 304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/sort_manual.gif HTTP/1
.0" 304 0 -
Hi All,
I have installed apache well and as per the documents i could read that the apache related plugins are present under weblogic_home/server/bin
but its clear in the apache guide that the plugins are not available for weblogic 10.3 release.which we have to download externally and put it in the apache server.
can some one let me know where can i find these zip files which contain mod_jk plugins
Thanks in Advance....I find this very confusing, finding the Apache plugins for 10.3.x. After searching around, looking into the download categories that I would think are relevant, I found nothing. I don't really need support information, support site requires its own logins and everything, and I just want that little piece of software. I ended up finding the direct link on http://vikashazrati.wordpress.com/2009/10/10/apache-weblogic-ubuntu/. This is very much not encouraging...
-
Do i need apache with weblogic 8
I am developing a high traffic website. is weblogic alone is enough to cater high traffic or do i need a sep web server also.
One benefict I can say is that when the weblogic goes down or taken down for maintence I can display a message to the user.
thanks in advance.
Message was edited by SUNSHINE at Jan 25, 2005 8:15 AMHello,
Check out these presentations for some guidence (you need a flash plugin):
http://support.bea.com/askbea_soln/attachments/S-19032/Installing_Apache_Plugin_Proxy_By_Path_viewlet_swf.html
http://support.bea.com/askbea_soln/attachments/S-19033/Installing_Apache_Plugin_Proxy_By_Extension_viewlet_swf.html
The basic steps are to download the plugin and configure apache to pick it up.
apache conf config might look like:
AddModule mod_weblogic.c
<IfModule mod_weblogic.c>
WLProxySSL ON
Debug OFF
DebugConfigInfo ON
WLLogFile /var/log/wlproxy.log
FileCaching OFF
ErrorPage http://mydomain/noservice/noservice.htm
ConnectTimeoutSecs 180
WLSocketTimeoutSecs 180
ConnectRetrySecs 20
Idempotent OFF
</IfModule>
there should be lots of resources of the web for configuring pluggins, the wls one is no different.
cheers,
Hoos
Hussein Badakhchani
www.orbism.com
Maybe you are looking for
-
Reuse of MAP in Import Manager
I am trying to reuse a MAP created to load KNA1 table in Import Manager in the same server. The Source file name and file type (.xls) is the same, as well as the original worksheet name. While the Import Manager is matching records, it is abending w/
-
Placed objects not printing correctly
Not sure if this is a bug in the new update, but this just started happening on all of my Indesign documents, some of which are fairly old and have been used hundreds of times. All adobe programs are CS6 Master/Photoshop X Pro. When I go to print one
-
Native resolution changed - now missing 1440x900
Somehow my Macbook Pro 15-inch mid 2012 (not Retina) computer went from a 1440x900 resolution, which I liked, to 1680x1050! This is now the native resolution and 1440x900 is NOT one of the few resolution options I have under Scaled. I tried resetting
-
Exchange 2007 Multiple Send Connector Cost Best Practice
Hi,<o:p></o:p> I am running exchange 2007 SP2 and have 2x exchange connectors set up with an equal default cost of 1.<o:p></o:p> Connector 1 is set to * address space and should forward all emails to two email security/management servers<o:p></o:p> C
-
Extraction from generic datasource
Hello, We are planning to build a generic datasource on a custom table in ECC. I wanted to know if there will be any issues with the extraction if records are being inserted into the table while the extraction is going on? Any help would be appreciat