Apache and Firefox2 on Netware65 SP6

Hi
someone must know the answer to this, i have just built a very basic
site with sharepoint designer and have copied it to the
sys:apache2\htdocs folder and in IE it works fine, when i try to access
the site with firefox i just get
at the top left hand corner of the page, if i copy the contents of the
htdocs folder to an IIS server it works fine on both IE and firefox 2,
so its something to do with apache and firefox.
Anyone got any ideas ?
Cheers in advance
GarethWilson
http://www.systems.swan.ac.uk/gareth/homer.gif
Fighting with managment to keep Novell over Reboot-o-soft :(

GarethWilson,
> you should be able to now get at it :
>
> 'Welcome To LIS Systems Website' (http://137.44.41.45)
>
Well. Tell your users to use Opera :) Works perfecty there, but. If I
go to your site it asks for a lis_systems_header.htm and that page
contains garbage. See below. Before the doctype tag, you have
\357\273\277. Ie the page is not valid HTML.
0000 00 17 a4 d1 0c 66 00 18 f3 5a c4 0a 08 00 45 00
.....f...Z....E.
0010 03 fe 29 7a 40 00 2d 06 ac 7c 89 2c 29 2d c0 a8
..)[email protected]..|.,)-..
0020 01 02 00 50 05 60 c1 6a db 1e 48 dc 3b df 50 18
...P.`.j..H.;.P.
0030 1d 50 3e d7 00 00 48 54 54 50 2f 31 2e 31 20 32 .P>...HTTP/1.1
2
0040 30 30 20 4f 4b 0d 0a 44 61 74 65 3a 20 4d 6f 6e 00 OK..Date:
Mon
0050 2c 20 32 30 20 41 75 67 20 32 30 30 37 20 31 35 , 20 Aug 2007
15
0060 3a 30 30 3a 34 33 20 47 4d 54 0d 0a 53 65 72 76 :00:43
GMT..Serv
0070 65 72 3a 20 41 70 61 63 68 65 2f 32 2e 30 2e 35 er:
Apache/2.0.5
0080 39 20 28 4e 45 54 57 41 52 45 29 20 6d 6f 64 5f 9 (NETWARE)
mod_
0090 6a 6b 2f 31 2e 32 2e 31 35 0d 0a 4c 61 73 74 2d
jk/1.2.15..Last-
00a0 4d 6f 64 69 66 69 65 64 3a 20 57 65 64 2c 20 31 Modified: Wed,
1
00b0 35 20 41 75 67 20 32 30 30 37 20 31 31 3a 30 32 5 Aug 2007
11:02
00c0 3a 31 30 20 47 4d 54 0d 0a 45 54 61 67 3a 20 22 :10 GMT..ETag:
00d0 31 61 66 36 65 66 2d 32 39 34 2d 65 33 61 63 33
1af6ef-294-e3ac3
00e0 30 38 30 22 0d 0a 41 63 63 65 70 74 2d 52 61 6e
080"..Accept-Ran
00f0 67 65 73 3a 20 62 79 74 65 73 0d 0a 43 6f 6e 74 ges:
bytes..Cont
0100 65 6e 74 2d 4c 65 6e 67 74 68 3a 20 36 36 30 0d ent-Length:
660.
0110 0a 4b 65 65 70 2d 41 6c 69 76 65 3a 20 74 69 6d .Keep-Alive:
tim
0120 65 6f 75 74 3d 31 35 2c 20 6d 61 78 3d 39 39 0d eout=15,
max=99.
0130 0a 43 6f 6e 6e 65 63 74 69 6f 6e 3a 20 4b 65 65 .Connection:
Kee
0140 70 2d 41 6c 69 76 65 0d 0a 43 6f 6e 74 65 6e 74
p-Alive..Content
0150 2d 54 79 70 65 3a 20 74 65 78 74 2f 68 74 6d 6c -Type:
text/html
0160 3b 20 63 68 61 72 73 65 74 3d 49 53 4f 2d 38 38 ;
charset=ISO-88
0170 35 39 2d 31 0d 0a 0d 0a ef bb bf 3c 21 44 4f 43
59-1.......<!DOC
0180 54 59 50 45 20 68 74 6d 6c 20 50 55 42 4c 49 43 TYPE html
PUBLIC
0190 20 22 2d 2f 2f 57 33 43 2f 2f 44 54 44 20 58 48 "-//W3C//DTD
XH
01a0 54 4d 4c 20 31 2e 30 20 54 72 61 6e 73 69 74 69 TML 1.0
Transiti
01b0 6f 6e 61 6c 2f 2f 45 4e 22 20 22 68 74 74 70 3a onal//EN"
"http:
01c0 2f 2f 77 77 77 2e 77 33 2e 6f 72 67 2f 54 52 2f
//www.w3.org/TR/
01d0 78 68 74 6d 6c 31 2f 44 54 44 2f 78 68 74 6d 6c
xhtml1/DTD/xhtml
01e0 31 2d 74 72 61 6e 73 69 74 69 6f 6e 61 6c 2e 64
1-transitional.d
01f0 74 64 22 3e 0d 0a 3c 68 74 6d 6c 20 78 6d 6c 6e td">..<html
xmln
0200 73 3d 22 68 74 74 70 3a 2f 2f 77 77 77 2e 77 33
s="http://www.w3
0210 2e 6f 72 67 2f 31 39 39 39 2f 78 68 74 6d 6c 22
.org/1999/xhtml"
0220 3e 0d 0a 0d 0a 3c 68 65 61 64 3e 0d 0a 3c 6d 65
>....<head>..<me
0230 74 61 20 68 74 74 70 2d 65 71 75 69 76 3d 22 43 ta
http-equiv="C
0240 6f 6e 74 65 6e 74 2d 54 79 70 65 22 20 63 6f 6e ontent-Type"
con
0250 74 65 6e 74 3d 22 74 65 78 74 2f 68 74 6d 6c 3b
tent="text/html;
0260 20 63 68 61 72 73 65 74 3d 75 74 66 2d 38 22 20 charset=utf-8"
0270 2f 3e 0d 0a 3c 74 69 74 6c 65 3e 4c 49 53 20 53 />..<title>LIS
S
0280 79 73 74 65 6d 73 20 48 65 61 64 65 72 3c 2f 74 ystems
Header</t
0290 69 74 6c 65 3e 0d 0a 3c 62 61 73 65 20 74 61 72 itle>..<base
tar
02a0 67 65 74 3d 22 63 6f 6e 74 65 6e 74 73 22 20 2f get="contents"
02b0 3e 0d 0a 3c 73 74 79 6c 65 20 74 79 70 65 3d 22 >..<style
type="
02c0 74 65 78 74 2f 63 73 73 22 3e 0d 0a 2e 73 74 79
text/css">...sty
02d0 6c 65 31 20 7b 0d 0a 09 62 6f 72 64 65 72 2d 77 le1
{...border-w
02e0 69 64 74 68 3a 20 30 70 78 3b 0d 0a 7d 0d 0a 3c idth:
0px;..}..<
02f0 2f 73 74 79 6c 65 3e 0d 0a 3c 2f 68 65 61 64 3e
/style>..</head>
0300 0d 0a 0d 0a 3c 62 6f 64 79 20 73 74 79 6c 65 3d ....<body
style=
0310 22 6d 61 72 67 69 6e 2d 6c 65 66 74 3a 20 30 3b "margin-left:
0;
0320 20 6d 61 72 67 69 6e 2d 74 6f 70 3a 20 30 3b 20 margin-top: 0;
0330 62 61 63 6b 67 72 6f 75 6e 64 2d 69 6d 61 67 65
background-image
0340 3a 20 75 72 6c 28 27 68 65 61 64 65 72 62 61 63 :
url('headerbac
0350 6b 2e 70 6e 67 27 29 22 3e 0d 0a 0d 0a 3c 70 20 k.png')">....<p
0360 73 74 79 6c 65 3d 22 77 69 64 74 68 3a 20 37 37 style="width:
77
0370 36 70 78 22 3e 3c 61 20 68 72 65 66 3d 22 6c 69 6px"><a
href="li
0380 73 5f 73 79 73 74 65 6d 73 5f 68 65 61 64 65 72
s_systems_header
0390 2e 68 74 6d 22 20 74 61 72 67 65 74 3d 22 5f 73 .htm"
target="_s
03a0 65 6c 66 22 3e 0d 0a 3c 69 6d 67 20 73 72 63 3d elf">..<img
src=
03b0 22 43 65 6e 74 65 72 50 69 65 63 65 2e 6a 70 67
"CenterPiece.jpg
03c0 22 20 77 69 64 74 68 3d 22 37 38 30 22 20 68 65 " width="780"
he
03d0 69 67 68 74 3d 22 31 35 30 22 20 63 6c 61 73 73 ight="150"
class
03e0 3d 22 73 74 79 6c 65 31 22 20 2f 3e 3c 2f 61 3e ="style1"
/></a>
03f0 3c 2f 70 3e 0d 0a 0d 0a 3c 2f 62 6f 64 79 3e 0d
</p>....</body>.
0400 0a 0d 0a 3c 2f 68 74 6d 6c 3e 0d 0a ...</html>..
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2600

Similar Messages

Apache 1.3.12 and Weblogic 5.1 SP6 Performance downgrade

Hi,
We are developing a transaction site currently using Weblogic 5.1 SP6 as app server
and Apache server 1.3.12 as the web server.
When we hit directly to the weblogic server, bypassing the apache server, the
JSP pages are displayed instantly (max 1-2 sec) but when we route our requests
through Apache server, the response time increases several times (above 15 seconds).
We are testing our application on
* UltraSPARC-IIi 440 MHZ dual processor machine
* 1G RAM
* running Solaris 2.6 and
our database server is
* UltraSPARC-II 400 MHz * 4 box
* with 2G RAM
* running solaris 2.6
* running Oracle 8i
Please help us in identifying the bottleneck, specially for the response from
the weblogic server to the user. The request almost instantaneously reaches the
weblogic server from apache server.
We have installed the apache-weblogic plug-in as specifed in the documentation
at http://www.weblogic.com/docs51/admindocs/apache_bridge.html
regds,
- ashish

When you reverted back to SP6, did you also revert back the mod_wl??.so
files in apache's /libexec directory?
What did you specify as your WebLogicHost in apache's conf file? If you
are using hostname or a FQDN, try changing that to an IP address or even
127.0.0.1 since I presume what WebLogic is listening on 127.0.0.1 anyway.
My thoughts are, if you are using a non-localhost hostname, it might be
latency with DNS.
Turn DEBUG on so that you can see what the plug-in is getting. Also try
sniffing at what your server is doing in between when apache received
the request up to that Weblogic receives it.
John
Ashish Bhatia wrote:
Yes, I have applied the mod_wl???.so files from lib/solaris to apache's libexec
directory.
Tried sp8 also but posix performance pack is not activated in sp8 and there are
some other issues like Socket Exceptions whenever the browser window is closed
etc. So, had to revert back to SP6.
Can this be an issue of Apache on Solaris with WLS 5.1 (running in the same box)?
- Ashish
"Jesus M. Salvo Jr." <[email protected]> wrote:
When you applied SP6, did you also copy the the mod_wl???.so files from
lib/solaris to apache's libexec/ directory?
Otherwise, you can try turning on debugging for the plug-in, as stated
on the doc ... or try SP8.
I am running a development / test server of WLS 5.1 SP6 on Linux, with
Apache and the plug-in, and it seems to be just as fast as accessing
WLS
directly.
John
Ashish Bhatia wrote:
Hi,
We are developing a transaction site currently using Weblogic 5.1 SP6as app server
and Apache server 1.3.12 as the web server.
When we hit directly to the weblogic server, bypassing the apache server,the
JSP pages are displayed instantly (max 1-2 sec) but when we route ourrequests
through Apache server, the response time increases several times (above15 seconds).
We are testing our application on
* UltraSPARC-IIi 440 MHZ dual processor machine
* 1G RAM
* running Solaris 2.6 and
our database server is
* UltraSPARC-II 400 MHz * 4 box
* with 2G RAM
* running solaris 2.6
* running Oracle 8i
Please help us in identifying the bottleneck, specially for the responsefrom
the weblogic server to the user. The request almost instantaneouslyreaches the
weblogic server from apache server.
We have installed the apache-weblogic plug-in as specifed in the documentation
at http://www.weblogic.com/docs51/admindocs/apache_bridge.html
regds,
- ashish

Apache and Weblogic authentication

Apache 2.0 and WL 8.1 SP6;
Apache redirects to a wl web app and the web app's front page is password protected using Apache's authentication services.
Turns out, the users configured with Apache's 'htpasswd' have to be duplicated in weblogic. Curious to know why this is. There appears to be no documentation of this necessity that I could find.
Any ideas about the configuration principles involved here?
Thanks,
Karoly

Hi Scott,
The only way it can work is when Apache adds another token to the request
say
MyToken : value
U can create a Custom Identity Asserter to read that token and authenticate the user.
U can find the steps to create custom identity asserter here
http://weblogic-wonders.com/weblogic/2010/03/15/custom-identity-asserter-for-weblogic-server/
HTH,
Faisal

Right problem with apache and tomcat

Bonjour;
I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
But I have the following problem with apache (file error.log) :
[Tue May 6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
[Tue May 6 17:26:22 2003] [error] Cannot open connection "warpConnection"
[Tue May 6 17:27:01 2003] [error] Re-Trying to deploy connections
As root the error msg does'nt exists (lost)
Best regards;
A+;

Run it from the shell to see whats wrong:
# httpd

Error while starting Tomcat Apache and Jaguar services in AW webview server

hi,
I am facing a problem with AW webview server. I am not able to restart the Tomcat Apache and Jaguar Service after a planned server reboot activity.I am getting the below error.
"Could not start Apache Tomcat service on Local Computer. Error 1069. The service could not start due to log on failure"
The below account has been verified in the Domain controller and confirmed that the account is not Locked out or disabled.
I have AW , HDS and Webview running on the same server.
Can someone advice ...

What OS version? This might be a windows problem and not a Apache/Jaguar problem.
david

How to configure apache and weblogic in windows 2000

i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

Need Urgent Help with Apache and PHP

I have been struggling with apache and php for a week now and I finally broke down to post a message.
I have apache 1.3 running on my mac mini g4 with 10.4.9 and I installed sql. I went to the entropy website and downloaded php5 to install without knowing I already had php4 on the machine. I installed 5 but could not get it to work. I then went back to httpd.conf and tried to install php4 by uncommenting out the loadmodule and addmodule lines. I restarted apache but php still did not work. I tested the phpinfo.php script but all I got was the script in Safari and not the actual page. At the moment, I have php4 and php5 on my machine but can't get either one to work. I am sure there is an easy fix but I don't know it. Please help.

The problem is not terribly complicated, but Apache will not start with the entropy file in the folder
/etc/httpd/users/
Let me experiment on you. Rename the entropy file and then try to start Apache. To do this, open Terminal and paste this command:
<pre>sudo mv /etc/httpd/users/+entropy.conf /etc/httpd/users/+entropy<pre>
Now check the Apache configuration:
<pre>apachectl configtest<pre>
If it says "Syntax OK", start Apache:
<pre>sudo apachectl start<pre>
Since we only disabled the entropy file, you should be able to enable PHP5 with some more advanced configuring.

Enterprise portal access using reverse proxy using Apache and webdispatcher

Hi Guys,
As requirement, we need to give solution to customer about Reverse proxy scenario. I am new to this part.
What we have think of to use Apache and Web dispatcher.
I tried to search documents and found some sdn links also but still i am not comfortable to go about.
Need suggestion and document if anyone has used so far.reverse proxy.
As basis person, we need to do all ( Apache installation, Apache configuration, Web dispatcher installation and configuration, integration with EP.)
It will helpful to me if i can get Apache installation, Apache configuration part and integration with EP, or web dispatcher, configuration etc.
Thanks,
Deepak

We used Netscaler for Reverse Proxy implementation and can assure you that network team performed most of the set ups. This was on EP 7.01.
From BASIS stand point it would be primarily Web Dispatcher Configuration.
Also refer the links I specified in another thread. There are several scenarios discussed there -
Re: Post values for userid and passowrd fields in logon page
http://wiki.sdn.sap.com/wiki/display/BSP/Using+Proxies
~ Dhanz

Apache and Jserv issues - AppsLogin and AppsLocalLogin not working

Hi,
I am trying to understand the Apache and Jserv issues
Home page - http://11i-tst-02.cisco.com:38901 - working fine
This confirms that Apache core module is working fine. Does this confirm about the pls module also ?
Apps local login - http://11i-tst-02.cisco.com:38901/OA_HTML/AppsLocalLogin.jsp - throwing Java Exception
Request URI:/OA_HTML/AppsLocalLogin.jsp
Exception:
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.SSOManager.getAppsServletAgent(SSOManager.java:1727)
at oracle.apps.fnd.sso.SSOManager.getLoginUrl(SSOManager.java:316)
at oa_html._AppsLocalLogin._jspService(_AppsLocalLogin.java:410)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:479)
Is it related to SSO ? Because error mentions about SSOManager
But why does AppsLocalLogin need to go thru SSO ?
Doesn it mean Jserv issues ? I am able to see same message logged in jvm logs ?
Restarting Apache doesnt help
Servlet login - http://11i-tst-02.cisco.com:38901/oa_servlets/AppsLogin - throws Internal Server Erorr
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Apache log doesnt show any error
Servlet test works - http://11i-tst-02.cisco.com:38901/servlets/Hello
Example Apache JServ Servlet
Congratulations, ApacheJServ 1.1 is working!
OAM works - http://11i-tst-02.cisco.com:38901/servlets/weboam/oam/oamLogin - Navigating to SSO page for authentication
AOL test works - http://11i-tst-02.cisco.com:38901/OA_HTML/jsp/fnd/aoljtest.jsp
FND_WEB.PING works - http://11i-tst-02.cisco.com:38901/pls/QTCSTG/FND_WEB.PING
Connection test works - http://11i-tst-02.cisco.com:38901/servlets/oracle.apps.icx.common.ConnectionTest
So, my question is why AppsLogin and AppsLocalLogin are not working - if servlets / AOL / FND / OAM links are working
Is there issue with Jserv ?
Can someone please explain the significance of the above tests
And which tests need to pass for AppsLogin and AppsLocalLogin to work
Thanks

Since all the tests work fine as you stated above, I suggest you do the following:
- Rerun Autoconfig on all tiers
- rm -rf $OA_HTML/_pages
- Bounce Apache

Apache and PHP not working together

Hey all,
Ok, I reinstalled my server yesterday and followed the LAMP wiki to set up Apache, MySQL, and PHP. Now, I got Apache and MySql working great, but when I go to directory that has a .php file to open, my brower is asking me what application I want to open with the file.
I have set up this to handle the docuemtns:
DirectoryIndex index.php index.phtml index.html
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
and still no go.
Anyone got this to work?
Thanks!!!
Joe

cactus wrote:
http://bbs.archlinux.org/viewtopic.php?t=15596
Check and see if what I said in my last post is happening to you as well...
Yeah, I checked and the path is correct...
Maybe I should just reinstall it?
Thanks!!!

Problems with Apache and custom JSPs

Hi
We've made an application on top of IFS, using JWS in our test envirnment. Just before making some stress tests, I'd like to try it using Apache. We're currently having two problems:
1) I switch to the apache configuration running ifsconfig and not selecting JWS. When I try to access the ifs using http://host/ifs/files, everything goes well except that the "logout" icon doesn't appear. I did a little research and found out that the link goes to /ifs/webui/images/logout.gif. This gives an error in mod_jserv.log, like this one:
[07/06/2001 22:54:20:315] (ERROR) ajp12: Servlet Error: ClassNotFoundException: webui
It seems it's trying to find a "webui" class, since in ifs.properties every url that begins with /ifs goes to jserv.
I don't know if this is a know problem or what should I've check...
2) This one is more important. We're using some custom JSPs, which we use to edit the properties of some types of documents. Basically, when the user clicks over a file one of our JSP appears. These JSPs call a bean to do some processing, passing the HttpRequest as a parameter. The problem is that when using JWS we get the "path" request variable like in path=/%3A29464
However, when using Apache we get path=/ifs/files/%3A29464 ( and afterwards we get an exception because the ifsSession.getPublicObject method doesn't work).
Any hints on this? One way could be to check if the path begins with /ifs/files, but that's not really nice.. and besides I could have the same problem in some other parts.
It's kind of urgent....
Thanks
Ramiro
null

Hi,
The answer to your path problem is that you can make use of API to find out the current path so that it works both with Apache and with JWS. Follow the steps
1. import the oracle.ifs.adk.http package in your custom jsps
<%@ page import = "oracle.ifs.adk.http.*" %>
2. Then within your jsp use the method
getIfsPathFromJSPRedirect
<%= oracle.ifs.adk.http.HttpUtils.getIfsPathFromJSPRedirect(request) %>
This will give you the current path of the object on which you clicked on and which initiates the custom jsp.
You can look at the CMS application which has made use of this API. URL is
http://otn.oracle.com/sample_code/products/ifs/sample_code_index.htm
Choose, sample applicatin -> Content Management system.
Hope this helps
Rajesh
null

Client variables not working in Apache and CF8

I have Apache and CF8 set up with multiple virtual hosts
locally for development(win xp pro, apache 2.2.4)
Client variables are not working. I can log into CF
administrator fine(not sure if authentication uses client variables
or not). Any site that I work on that uses client variables behaves
as if the variable is not defined after setting it then going to
another page that checks for its existence. I have verified that
client variables are set up in cf administrator.
Thanks for any help

Thanks a lot. I understood the mistake. Pls do not spend time on this.
Thanks,
Swarna

Why do we need the combination of Apache and Tomcatt?

Both Apache and Tomcatt are web servers. It is possible to get the ob done with any of them. Then, why do we go for the combination of Apache and Tomcatt in most of the Applictions? What is the significance of doing it?

The Apache Web Server is a high-performance HTTP server, which is very good in serving static content (i.e., HTML pages, JPG files, etc.).
Apache Tomcat is a servlet container written in Java. It includes an HTTP server, but it isn't optimized as much as the Apache Web Server and probably doesn't have as many configuration options as the Apache Web Server.
Often people use Apache Web Server as the primary HTTP server, and run Tomcat on top of that. You can configure Apache so that it redirects requests for servlets and JSPs to Tomcat. Apache Web Server cannot run servlets and JSPs by itself.
Jesper

Apache and weblogic server

hi all.
i am using oracle application server 10g R2 over windows server 2003 64bit
but now i planned to go for apache and weblogic server for this i do not have idea that
should i do? plz what softwares are required to use apache and weblogic server with current version
10g R2.?

The WebLogic Server (WLS) is a Java container similar to OC4J in Application Server 10g release 2. If you want to use WLS, you will have to upgrade your Application Server 10g installation to Fusion Middleware 11g. The upgrade path typically depends on the products which you are using in 10g, e.g. the upgrade path for SOA is different than the upgrade path for Forms/Reports or Oracle Portal. The [url http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/before_you_begin.htm]Upgrade Planning Guide is a good start.
Thanks,
EJ

Howto - Using apache and mod_php4

This is a quick tutorial on how to use the apache web server with the php module. I am by no means an expert, so if you have any questions/suggestion, please feel free. That being said, let's get started:
1. Install apache and php:
[root@limbo root]# pacman -Sy apache
[root@limbo root]# pacman -Sy php
2. First, ensure that you have the apache web server running properly, and can serve up simple HTML documents:
[root@limbo phpbb]# /etc/rc.d/httpd start
[ Starting HTTP Daemon DONE ]
Now, point your browser to http://localhost/ and you should see a default Arch web server page. If not, you must get this working before continuing.
3. Now, if the apache web server is working, let's shut it down and work on adding PHP functionality:
[root@limbo root]# /etc/rc.d/httpd stop
[ Stopping HTTP Daemon DONE ]
4. We must now make changes to the apache config file:
[root@limbo root]# nano /etc/httpd/conf/httpd.conf
5. We must load the PHP module. Find the LoadModule portion of httpd.conf and add:
LoadModule php4_module lib/apache/libphp4.so
and then find the AddModule section and add:
AddModule mod_php4.c
6. To let apache know that files ending in .php are in fact PHP files, we add the following. It doesn't matter where you put it, but you can search for AddType and pick a plac e you think fits.
# Added by root for mod_php
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
7. And to ensure that .php files are looked at first by apache when looking at directory contents, find the section that looks like what you see below, but notice that I have added index.php for php index files:
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.php index.html
</IfModule>
8. Now, change the root apache directory by finding the line containing DocumentRoot and change it to the following (we will create the directory shortly, and place an index.php in there also):
DocumentRoot "/home/httpd/html/phptest"
9. For the final config step, we must tell the Arch init script to load the php module when it starts apache. All we have to do is edit /etc/conf.d/httpd and add the APACHE_OPTS line:
HTTPD_USE_SSL="no"
APACHE_OPTS="-D PHP4"
10. Now, create the directory /home/httpd/html/phptest
11. Create a plain text file using your favorite text editor. The file is /home/httpd/html/phptest/index.php
The contents of this file should be the following:
<html>
<head>
<title>PHP Test</title>
</head>
<body>
<? phpinfo(); ?>
</body>
</html>
12. Once running the apache web server, you will notice that Arch sets it up to run as user "nobody". Therefore, we want "nobody" to own all the files that we are going to use:
[root@limbo root]# chown -R nobody.nobody /home/httpd/html/*
[root@limbo root]# chmod -R 744 /home/httpd/html/*
13. Finally, start the apache web server again, and point your browser to your http://localhost/ You should now see alot of info, provided dynamically by the PHP module.
I hope this quick tutorial is useful. It you see anything wrong with it, or have suggestions, please let me know and I will edit this post.

seba wrote:
hi, i cant start apache
[root@zlk daemons]# /etc/rc.d/httpd start
[ Starting HTTP Daemon FAILED ]
check you /var/log/httpd/error_log
:^)

Apache and Firefox2 on Netware65 SP6

Similar Messages

Maybe you are looking for