Apache and form server check

HI,
i have three nodes in middle tier and each node contains apache and form server , so now how to check these servers is up or not?

The Enterprise Manager Console lets you administer your servers.
See the Administrator's Guide for details. I think it really helps if you read that guide.
http://download-uk.oracle.com/docs/cd/B14099_17/idmanage.htm

Similar Messages

Apache and weblogic server

hi all.
i am using oracle application server 10g R2 over windows server 2003 64bit
but now i planned to go for apache and weblogic server for this i do not have idea that
should i do? plz what softwares are required to use apache and weblogic server with current version
10g R2.?

The WebLogic Server (WLS) is a Java container similar to OC4J in Application Server 10g release 2. If you want to use WLS, you will have to upgrade your Application Server 10g installation to Fusion Middleware 11g. The upgrade path typically depends on the products which you are using in 10g, e.g. the upgrade path for SOA is different than the upgrade path for Forms/Reports or Oracle Portal. The [url http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/before_you_begin.htm]Upgrade Planning Guide is a good start.
Thanks,
EJ

Infrastructure and forms server into same machine

Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]

Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit?

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

Checklist for apache server and form server

Hi,
When some thing wrong happen to Apache server
please tell me the checklist for apache simillarly for form server
Thanks

I would recommend the following notes:
Note: 244274.1 - Oracle Application Object Library Generic Service Management (GSM) Setup Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=244274.1
Note: 200360.1 - Oracle Application Object Library Concurrent Manager Setup Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200360.1
Note: 398624.1 - Oracle Application Object Library Concurrent Manager Test Set
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=398624.1
Note: 370317.1 - Oracle Application Object Library Concurrent Processing Data Collection Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=370317.1
Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
One more Note which helps to make sure that all necessary components of Oracle applications are up and running before releasing the instance to end-users:
Note: 283976.1 - Applications 11i Health Check After Maintenance
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=283976.1

11i : Can we run Apache and Forms on cluster for failover?

Hi... We are currently running 11.5.5 successfully on 4 servers:
URANUS (cluster made up of HADES and ATHENA) : database and reports
ARTEMIS : forms server
PEGASUS : http server
We are now attempting to reconfigure the application architecture to increase
failover because if ARTEMIS or PEGASUS fails, our system is unusable. At the
back end we are ok because we can bring up the database and reports server on
the secondary node in the URANUS cluster.
One of the options we are considering is to cluster the 2 machines ARTEMIS and
PEGASUS together, and run forms and http on the one primary node. If the
primary node in the cluster failed, then we would bring up the forms and http
server on the secondary node automatically when failover happens.
Has anyone done this?
Does Oracle support the clustering of these application tier services (http and
forms) on Compaq TRU 64 clusters?

hmm.. that's a very interesting question... if you find out please let me know too.

How do i get my apache and php server ?

Hello,
I want to be able to test my php page through my computer. How can i do that? I am very new to php and apached stuff. I have on my mac 10.4.3. How would you do it?
Thanks

Hello,
I want to be able to test my php page through my
computer. How can i do that? I am very new to php and
apached stuff. I have on my mac 10.4.3. How would you
do it?
Have you installed the PHP apache module if not you can download a prebuilt package that works with tiger.
http://www.entropy.ch/software/macosx/php/
Once installed put your PHP file inside your webserver directory and point your favourite webbrowser to it.
e.g.
http://127.0.0.1/~your_username/test.php

Canvas and Forms Server

I have an application with some different windows. Each window possesss a different function. When I go to publish my application in web, those windows with one canvas had only appeared. The ones that possessed one more than, had simply not appeared. It has some restriction how much to the this?
9iAS 1.0.2.2.1
Forms 6i

See my previous answer on Focus and somewhere for the cursor to go. If in doubt do a GO_ITEM() rather than SHOW_WINDOW()

Problems with apache and application server

Hi there,
I got apache running on the same port as the application server. Each time I want to start the application server or make it work (without displaying the 404 page or an search engine) I have to shut down my apache server!
Is there a way I can change the port of the application server so that I can run both at the same time ?
I have J2EE 1.4 version
Thanks in advance
Rik

yes, you can do this via the admin gui by modifying the http listener port.
You can also do this via the cli commandline as well http-listener-1 is the one you want to change the port for.
http://docs.sun.com/source/817-6088/httpservice.html has details

Forms 6i, Forms Server and MS Word Templates

Hi All
Thanks for taking the time to look at my question :
I have a Forms 6i application running in client/server environment that uses OLE2 to open up a MS Word 2000 template stored in c:\orant\templates.
It then populates this word document before printing it off.
My question is, if I deploy the application over the web via Oracle 9iAS and Forms Server, can I still use the functionality of OLE2 and perform the task outlined above ?
Any white papers, tutorials, examples, etc would be most welcome.
Greg

You can read this:
http://otn.oracle.com/products/forms/pdf/ClientSideOLE.pdf
Helena

FORMS SERVER help ASAP

I know this is era of 9iAS.But one of our clients has Forms 6i and Forms server and its not cost effective for them to buy high-end server for implementing 9iAS.So is it alright to implement such an architecture with Oracle 8i as back-end.Is there any issue of Oracle support expiration for Forms Server.Since I have migrated client server architecture based forms and reports to 9iAS, I am not too sure of how to do the same without 9iAS. Is web-enabling of forms in 9iAS same as with Forms server.Please help , as we have to provide solution feasibilty report to our clients.
Thanks in advance,
Ankush

I don't know anything about suport,but,I can tell you that is easy to install a forms/reports server after you have a apache,iis or some other web listener installed on your server...

Webs and Forms

Enough already!
I decided to start getting into Web Forms and blew my mind with applications and servers. How, or where can I find a decent breakdown of the differences between, and uses for, the following:
Oracle WebServer,
Oracle Web Applications Server,
Oracle Applications Server,
Oracle Forms Server,
Oracle Developer Server,
Oracle WebDB,
(see why I'm confused?)

Try Technet for documentation..
Oracle WebServer was the original name for the web server version 2.1
Oracle Web Applications Server was the name for version 3.0 of the web server
Oracle Applications Server is the name for the 4.x version of the web server
Oracle Forms Server is the new name (for Marketing and product positioning purposes)
for Oracle Developer Server. Oracle Developer no longer exists it's products are split into
Oracle Forms Server
Oracle Reports Server
Oracle Forms Builder
Oracle Reports Builder
Oracle WebDB is a totally different product that is 100% in the database and 100% in the browser (i.e. no tools required, only a browser) I suggest you donwload it and try it.
To web deploy your forms (if you use 6i - the lates version)
You need..
An Oracle database 7.3.4 and up
A webserver that supports CGI (e.g. Apache)
Oracle Forms Server 6i
Jason Pepper
Senior Product Manager
Oracle EIT

How Oracle forms server 6i run on web?(Configuration)

hi all,
I want to run oracle forms on web.
For that,
I installed forms server 6i.
I installed forms developer 6i.
which web server i have to install?
What are the configuration required for that both (Web Server and Forms Server)?
can u give me suggestion step by step.
thanx in advance
regards,
dhaval lodha

Hi,
Forms Server uses the WebDB Listener for the web access.
Since then we improved Forms Services to use the Oracle HTTP Listener in Oracle Application Server. Oracle Applicaqtion Server also is the only supported application server for Forms on the web.
Frank

Application Server & Forms Server

I'm trying to study Oracle Developer. I need someone to tell me what's the different between Application Server and Forms Server?
Is Application server software that can run any application one of them is form applications?
Is it one software? so if I use it to run my forms Ill call that machine forms server or if i use it to run my report Ill call it report server.
I would appreciate any help
With regards

Hi.
Oracle Forms Server - the correct name is Oracle Application Server Forms Services - is a component of teh Oracle Application Server.
After installing the full version of Application Server Forms is ready for you to use.
Please refer to the Forms Whitepapers on otn.oracle.com/products/forms for how to configure Forms (formsweb.cfg and default.env) to run your custom applications.
Configuration is also supported through Enterprise Manager.
Frank

Forms server architecture advice needed

Hi
We are using Forms & Reports Standalone 10.1.2.3.0. I am trying to get confirmation on two areas: how network traffic flows between client and Forms Server, and if traffic between the client and engine is encrypted.
Network Traffic
==========
Are the steps below the correct sequence of steps, particularly the last two steps?
. user enters the appropriate URL into a browser
. web server serves page containing applet tag (the applets render the forms screens on the client)
. Browser requests applet if not already on client
. Web server downloads applet to client
. Applet on client contacts Forms Listener on server (using socket specified).
. Forms listener starts a java runtime process on the server and hands off communication to it.
. All further communication (as the user interacts with the form) is directly between applet on client and runtime process on server.
Encryption
=========
Once communication between the client and the runtime applet is a direct relationship, is this traffic encrypted. I have seen a white paper from 2006 "An overview of Oracle Forms Server Architecture" which states it is, but this paper is 8 years old and I cannot find anything more upto date for 10gRel2.
Any help would be appreciated.
Regards
Andy

Oracle's reply to my questions were:
Network Traffic
=========
Your understanding for the forms network traffic process is almost correct, except for step (7), where further communication between the applet and the runtime process is done through the Forms Listener Servlet, i.e. not a direct communications as was the case with sockets.
But I believe this is not a network security issue, as both the Forms Listener Servlet and runtime process should reside on the same server machine.
Encryption
=======
If security is an issue for you, Forms Development do not promote the 40 bit encryption as a secure solution. It dates back to a time when security did not have such a high profile, and most applications were run over the intranet.
In that case, I would recommend using SSL.
Regards
Andy

Apache and form server check

Similar Messages

Maybe you are looking for