Apache can't start with " error resolving localhost ..."

Hi,
I have Oracle 9.2.0.4 installed on a White Box Linux. This installation for some reason shows an Apache problem:
When I try to start Apache then I have an error message stating the following
"date and time [error] OPM: PRIV: error resolving host name localhost"
then a message saying that httpd could not be started.
This error is not added to the log file but displayed instead on the screen. Morever, files with names mm.*.sem and mm.*.mem are created in $ORACLE_HOME/Apache/Apache/logs.
When I try "ping localhost" on this machine I have no problem and the name is correctly resolved!
Can any one please tell me what could it be?

Michel -
Any time. That's quite odd. And has your /etc/hosts
file changed at all? Is the first line setup
correctly to only include localhost and
localhost.localdomain?Yes it is.
Are you calling apachctl from
$ORACLE_HOME/Apache/Apache/bin? Well, I copy the file to /etc/init.d and launch Apache from there at startup. The reason is that I have changed the ports on which Apaceh will listen to 80.
You said you could
ping localhost successfully, but have you been able
to ping the localhost by name?Yes. I did. Note please that the name of the machine is lx_26_100.
ping localhost
ping 127.0.0.1
ping lx_26_100
ping 10.26.1.100
All of that works fine!
Have you tried
changing the value of the ServerName parameter from
the localhost's name to its IP address?
Well I didn't try this. I'll try it. However, the error message doesn't speak about lx_26-100 but instead it speaks about localhost not beeing resolved.
By the way, what are the files mm.*.mem and mm.*.sem in the logs of Appache?
-shawnThanks Shawn.

Similar Messages

Flash Builder 4.5 can't start with Error 3

Flash Builder 4.5 can't start with error 3 occurred "Please uninstall and reinstall the product".
It is fine after those are done, but this problem occurred again and again after some days.
It is very annoying, please help!

For god's sake will anybody from Adobe say something about this?
I'm having the same issue and it's f***ing annoying.
"Please uninstall and reinstall the product" is not an acceptable error message.
Please provide a workaround.

My CS can't start with error code 16

How can I find the CS5.5 serial number under MAC OS X if I want to reinstall it? My CS can't start with error code 16, it says configuration error.

Please refer the KB Doc : http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error- cs5.html

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

adobeamatuer
Thanks for the reply.
Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
Please update us on your progress when you get a chance.
Best wishes
Thanks.
ATR
Add On...spelling correct 12 03 2014.

Can you start with a jpeg?

My brother likes the functions on the camera raw panel and bridge.
He believes it will save him time over just photoshop.
Can he start with a jpeg image? If so, how does he activate the camera raw panel?
We have Bridge CS3 and Photoshop CS2. We have the Camera Raw 3.7 plugin.

If you REALLY are using Bridge CS3 with Photoshop CS2, I too would like to know how you are doing that. The capability to work with JPEG and TIFF images in Camera Raw was not introduced until Camera Raw 4.x, which is only compatible with Photoshop CS3.

TS3694 can anyone helpme with error 1015

can anyone help with error message 1015?

Google "Error 1015" and you will get help with your problem.
It is either because you tried to roll back the OS on your iPhone, someone has used the program TinyUmbrella on your computer, our your iPhone is jailbroken.

I would like to know what can i do with error code 1009

I would like to know what can i do with error code 1009

What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668

TS4006 My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the

My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the old? Any help would be greatly appreciated. It's been a week without a phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Hyper-V VM can't start with VHD attached, error 0x80070422

Hi,
i'm in a big trouble with Hyper-V on a Windows 2008 R2 server. Hardware is a HP Proliant DL360 G7. Role are DC, Hyper-V (yes, i know it's not recommended), AV client is Kaspersky Endpoint Security 10.2, and everything was working fine for more than a year.
Here is the full story, with the first part of problem i resolved.
First part:
I had problems with HP NIC (nc382i) when trying to update drivers to last version, and with HP Network Config Utility. I updated NIC drivers, then reboot, and i had the BSOD on boot, even in safe mode. So i had a look to minidump with debbugger, to find
reasons, and it seems the ksecdd.sys driver was the culprit (cryptographic kernel driver), but didn't get why, unless Kasperksy had to to something with it...anyway, i was able to boot by using the last good know configuration, and then I
removed the virtual switch on Hyper-V, dissolve HP network team (4 NICS), update drivers, then HP NCU, then tried to add a new Hyper-V virtual switch, all of these of course with VM stopped, and with autostart disabled on host reboot. I had BSOD only in normal
mode, no more on safe mode, so i used again last good known configuration, removed Kaspersky Endpoint Security, HP team, and virtual swith, used all drivers which were old working versions, made again HP team, virtual switch, and everything went fine, at last!
Boot with no errors, network was up and usable, all services were fine. Maybe it isn't important, but the only thing i realised is that network takes long to be up on reboot...
Now, second part with actual problems: i tried to start VM in Hyper-V...and i had the famous errors:
Microsoft Emulated IDE Controller (Instance ID {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}): Failed to Power on with Error 'The service cannot be started, either because it is disabled
or because it has no enabled devices associated with it.' (0x80070422).
And events ID 12140, 12010 and 12030
No matter what VM i tried to boot, it won't. Even if i try to create a new one, same issue.
I had a look everywhere to find solutions, so i tried with no luck :
- Change registry key to let correct a timing issue with FSDepends.sys and with
VHDMP.sys ("Start" REG_DWORD at "0" instead of "3" in "HKLM\SYSTEM\CurrentControlSet\Services\FsDepends")
then reboot
- Verify all access to registry, files, etc. with procmon utility to find a security problem
- Uninstall ARCServer BrightStor Backup, clean in safe mode any trace of Kaspersky with
kavremover utility
- Reverse to old HP BIOS which i know is working on others servers with same configuration
- Verify again access to file and registry while trying to boot VM with
procmon utility
- Removed Hyper-v role, then after reboot, install all same HP drivers for NICs, HP NCU, which are working on others servers, then reinstall Hyper-V role, create new VM...
- Verified many times files integrity with sfc (online and offline...)
Finally, i was able to boot a VM, only if i remove attached VHD, and i use only a DVD on IDE Controller, for booting for example on a Windows Server ISO. If i use an SCSI Controller, even without a VHD attached to it, i have other error:
Microsoft Synthetic SCSI Controller (Instance ID {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}): Failed to Power on with Error 'Insufficient Memory' (0x8007000E).
So i think the problem is with kernel driver, vhdmp.sys, or something like
vdvroot.sys, but i don't know how to correct this, and i'm in a dead end...is someone know for example what means the
0x80070422 error ? How can i verify kernel driver integrity?...
Any suggestion will be greatly apreciated, thanks!

Hi,
That error occur often is the Unknown Device installed which was related to vhdparser, maybe the AV soft change the vhdparser.
Please try to changed the startup value for FsDependes from 3 to 0 and also uninstalled the Unknown Device which was related to vhdparser from device manager.
If you are using the pass-through disk please install the following hotfix:
"0x0000000A" Stop error on a Windows Server 2008 R2-based or Windows Server 2012-based Hyper-V server that has many pass-through disks
http://support.microsoft.com/kb/2776366/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Migrate an application from x86 to x64. Compiling succeed, but can not run. Always start with error 0xc0000142.

platform: windows server 2008 r2; ide: visual studio 2005 (installed the x64 development kit)
Hi, everyone.
I want to migrate my application to x64 platform from x86/win32 platform. I added x64 platform in visual c++ 2005 option, and compiled successfully. But the application can not start. When start it always pop up an alert dialog saying "The application
was unable to start correctly (0xc0000142). Click OK to close the application." Meanwhile, it's worked well when I use win32 option to compile.
Someone says online, the dependency walker can detect some root cause. I used it, and found that IEFRAME.dll may be had some problem because when I double click it, pop up a dialogue saying "Errors were detected when processing "c:\windows\system32\IEFRAME.DLL".
See the log window for details.". But I can not resolve this issue.
Please help me.

If I had to try to solve this:
I'd start by verifying that I can compile, and run a skeleton x64 Windows app. Just create one from scratch using the Windows Application project template, add the x64 platform, build it and run. Hopefully all goes well.
If that works, then I'd try trimming down your app to just its essentials. If you're not using revision control software, back up your projects now, because once you find the problem by hacking and slashing, you'll want to revert so you can make a
clean fix.
The first thing to do here is just put a return 0; in the beginning of WinMain to see if it's code at runtime that's causing the problem or something about the linking and dependent library loading.
I'm guessing that, even with return 0, you will still have a problem, which would suggest that you are perhaps still linking against a 32-bit version of a library or something like that. Start removing dependencies or references or libraries until
you can build and run your stripped-down application. Eventually you'll find the one reference/library that causes it to fail to load.
You can also check the debug window to see if some modules loaded correctly and others not.
You can also run
Process Monitor (sysinternals) to see which dll it was accessing when it failed to load.
Make sure you revert any changes you made while hacking and slashing, then make your platform fixes, and have another go.
I suspect that eventually you'll find that you've added a link library that is a 32-bit .lib or a component that references a 32-bit library. You'll have to make sure you specify the x64 .libs for whatever libraries you are using. Sometimes this
means that you have to change you additional linker directories to point to the x64 libs instead of the x86/win32 libs. Be very careful about your platform when specifying linker libraries, directories, etc.
It could also be that the x64 version of a dll has been copied to your output folder rather than the x86 version, assuming they have the same name. You'll have to sort out your SDKs and get the right .libs and .dlls.
Make sure that your settings and property pages are set correctly for Release and Debug, and for x86 and x64.

After upgrade System Apache can't start

Hi i work with php5, apache (default) and mysql on my MacBook Pro...
This weekend i have installed the last upgrade of system, but now my server apache don't start..
If i try to start/stop/restart apache from terminal i get this error:
cbmac:~ cbmac$ apachectl start
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
org.apache.httpd: Already loaded
cbmac:~ cbmac$ apachectl restart
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
cbmac:~ cbmac$ apachectl stop
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
the content of the file org.apache.httpd.plist is :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>org.apache.httpd</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/httpd</string>
<string>-D</string>
<string>FOREGROUND</string>
</array>
<key>SHAuthorizationRight</key>
<string>system.preferences</string>
</dict>
</plist>
I have already repaired the files permissions with Disk Utility, but without resolving the problem.
I don't know what to do, someone have idea?
Thanks in advance
Manza

I also have the same error:
http://discussions.apple.com/thread.jspa?messageID=9125362&#9125362
But may have found a solution here in this thread ( Comment by 'parndt' ):
http://discussions.apple.com/thread.jspa?messageID=8689266&#8689266
I havnt tried it yet, As I spent half of yesterday, formatting, then trying to compile Apache, php, mysql, openssl on on a seperate partition, but changing the Apache LAYOUT config, yet the mac wouldn't listen to my changes and kept trying to use the original broken version.
I am formatting now, and going to try on a clean install, so will let you know.
This is a good reference site:
http://diymacserver.com/

SAPINST won't start with error message

Hello Gurus!
I'm having problems installing NW2004s on Win2003 SP1/Oracle 10.2g.
I'm installing ABAP and JAVA instance setup.
Action taken:
1. Retry Sapinst with sapinst_skip_errorstep=true (no good)
2. Both 00 and 01 instances are ok (all green in MMC)
3. Listener in the services is running
4. Developer trace - the last activity was started (J2EE connected)
I check the keydb.xml, I'm not sure where exactly is the problem.
Here is the error in sapinst log:
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1.TES/LOCALS1/Temp/sapinst_exe.2912.1220828093\jar\instgui.jar;C:/DOCUME1/ADMINI1.TES/LOCALS1/Temp/sapinst_exe.2912.1220828093\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool C:\Good\Master\NW_2004s_SR1_SAP_Installation_Master\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host eizo, port 21200 to continue with the installation
guiengine: login in process.
IRunModeReceiver CChoiceDialogModifier::continuePreviousRun()
ERROR 2008-09-07 15:55:22 [kdxxctaco.cpp:872]
CKdbTableContainerImpl::buildUpKeydbFromXmlFile(iastring,PKdbNameSpaceManager,iXMLDocument&)
FKD-00049 XML - Parser error: error: unexpected symbol; expected '<', '</', entity reference, character data, CDATA section, processing instruction or comment in line 1, 1
in file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\keydb.xml
Exit status of child: 1
If you guys need to see the keydb.xml, let me know your email so that I can send it to you separately. Its quite big.
Any information will be really appreciated. thanks!
Art>

Hi,
Get keydb.xml valid for your installation type from Installation disks (I am assuming it should be on Installation Master). Alternatively, if you want to continue interrupted installation, you can create a backup of your files located in sapinst_instdir (e.g. rename a root folder) and try to do a fresh install (just to see if you pass over the step when keydb.xml is parsed with error)
Regards,
Mike
null

Opmnctl fails to start with error: "Main: Nls Initialization Failed!!"

Hi. Just thought I would add this here since someone else will probably hit this error when attempting to start opmnctl: "Main: Nls Initialization Failed!!" when using 10g App Server on Windows.
There is a known workaround, which is to avoid libociei.so, but I don't have that object on windows, so I found that I have some conflict with other installed programs on this server. I removed them from the path, even the end of the path, opened a new command window, then, opmn started with no problem.
Probably not a long term solution, but if you are working on a dev server, like I am, you probably have a bunch of stuff installed that is no longer used ;)
Hope this helps someone,
Robin

Actually, I would first check on metalink to see if there is anything that can help with this error message. I resolved it by cleaning up the environment, but you probably need to keep your existing environment the way it is, since you have already installed.
Sorry--I didn't read through your question very well the first time.
--robin

How can I deal with error 200621 and 200279?

Hi, I am new to Labview. I was asked to use Labview to do some basic frequency-domain analysis for my homework. The hardware I use is myDAQ student instrumentation device. Basically, I am asked to transfer audio signal from MP3 to Labview by using the audio in jack on myDAQ, and transfer the editted signal to a speaker by using the audio out jack. Also, I was asked to have a toggle to let users alter from music to white noise.
Here's the problem. If I do not switch between white noise and music, it works well. But as long as I click the toggle, either error 200621 or error 200279 will appear. And I referred to the help file (http://digital.ni.com/public.nsf/allkb/AB7D4CA85967804586257380006F0E62), but I still have no idea how to solve the problem. Could anybody give me a detailed instruction, thanks.
vi file mentioned above is attached
Attachments:
HW1.vi ‏197 KB
Vm495+HW_1.pdf ‏153 KB

Take a look at:
Getting Started with NI-DAQmx: Getting Started with NI-DAQmx Programming in LabVIEW
Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
You can also find a lot of DAQmx examples with Find Examples under the Help menu.
Also, if you right click on a DAQ assistant and choose Open Front Panel, it turns it into a subVI where you can look under the hood and see how the DAQ assistant is doing its job with the basic DAQmx functions.
For queues, look for examples for that as well. And also look for the design templates under File / New... for Producer/Consumer architecture. Also do more searching on the forums for questions and answers about queues and producer/consumer.

Apache will not start with fastcgi

We use an acgi called LiveIQue for our website. This plugin requires FastCGI to render the pages. Works fine with 10.3. We've just purchased and installed a new Intel Xserve with 10.4.8, and every I install the FastCGI module, apache will not start. If I comment out the FastCGI, apache starts.
Anyone else having this problem.?

I just configured and tested mod_fastcgi and can say it works with apache 1.3.33
I understand it can also built for apache 2 however I haven't done this yet and I may eventually get to it.
As well, looking into fastcgi I decided to try and build php as a fastcgi application and install it with lighttpd (with all the bells and whistles) and this also works rather well, speedy for what it does.

Apache can't start with " error resolving localhost ..."

Similar Messages

Maybe you are looking for