Apache Cordova Tool - Unable To Attach

Unable to attach debugger "File not Found" using template for Apache Cordova in vs 2013. Happening on both Win 8.1 machine and win 7 64 machine.
Project loads correctly in both emulator and ripple but generates error "Unable To Attach. The system can not find the file specified." No further information is given - as in what file is not being found, which would have been nice.
Unlike the other solutions I have seen on web, installs on both machines ARE on a system drive. Latest updates are installed for node, git and android sdk. Environment variables and path variables are correct on both machines. Tried all api's
19 and above, uninstalling and reinstalling the tool multiple times, updating from command line.
Issue occured after switching from visual studio 2013 Pro update 3 to community edition update 4 on both machines.
Any suggestions? Kind of makes the tool completely useless without debugging capabilities. Thank you for any help in advance.

Hi Ogmacor,
Thank you for your post.
Your issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
From the bottom of this document about Apache Corodva tool:http://blogs.msdn.com/b/visualstudio/archive/2014/11/13/tools-for-apache-cordova-update-ios-debugging-amp-windows-8-1-support.aspx,
Microsoft announced the following statement:
If you’ve already installed the tools and are actively using it, thank you! The improvements we prioritize are based largely on your feedback, so please don’t feel shy in contacting us via
UserVoice, Twitter,
StackOverflow, and email.
So for your issue, I suggest consulting here:
http://stackoverflow.com/questions/tagged/multi-device-hybrid-apps which discusses Multi-Device Hybrid applications and Apache Cordova issues.
Thank you for your understanding,
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Setup blocked when installing VS Apache Cordova Extension, vs2013mda_0.3.1.exe

Hi, I have VS 2013 Ultimate with update 4, version 12.0.31101.00 and my pc is Windows 7, which means I can't install the Windows' Phone8 SDK (which req Windows 8 on my PC). I just need to support ios and android and so I was fine with that.
From this link, https://msdn.microsoft.com/en-us/library/dn757054.aspx, I was sent to this link, https://www.microsoft.com/en-us/download/details.aspx?id=42675 to download VS Tools for Apache Cordova CPT3.1. (vs2013mda_0.3.1.exe).
When I try to run this file, vs2013mda_0.3.1.exe, I then got setup block requesting me to install Windows Management Framework 3.0.
Well, the update for Windows Management Framework 3.0. seems like a pretty old file and I wonder if I should run it. Got it from https://www.microsoft.com/en-us/download/confirmation.aspx?id=34595
Then from Cordova download link, https://www.microsoft.com/en-us/download/details.aspx?id=42675, I found in the system requirement requiring me to first install the Windows Phone8 SDK from update 4! Well, I can't! The Windows Phone 8 options
are not available to me on Windows 7. I already try installing them from Control Panel's Program and Feature and the Windows phone 8 sdk and tools are not displayed as options that I can select to install.
So, how can I setup my VS2013 for using VS Apache Cordova extension? Thank you.
Thank you

Hello laJasmine,
I'm also a little confused about the tool you showed:
http://www.microsoft.com/en-hk/download/details.aspx?id=42675
Other Requirements:
Visual Studio 2013 Update 4, with the following features installed: "Tools for Maintaining Store apps for Windows 8" and "Windows Phone 8.0 SDK".
Note: Before installing Visual Studio 2013 Update 4, you must uninstall Multi-Device Hybrid Apps for Visual Studio 2013 CTP2.0 or Visual Studio Tools for Apache Cordova CTP3.0, if you have that installed.
The above requirement shows the Windows Phone 8.0 SDK is required but it is not supported on Win 7.
But the following blog
http://blogs.msdn.com/b/visualstudio/archive/2014/08/05/apache-cordova-tooling-update-with-support-for-windows-7.aspx clarified that from CTP2 the tool is not supported on Win7.
Have you ever tested to install VS Apache Cordova and what is the result the installer says? Based on the above blog the toll will ask you to install some components if it detect you missed them.
Anyway, I will try to install it on my Win 7 machine to have a test, you may need to wait for my result because my test machine have some problem and I'm trying to fix it.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do we use Script (batch file with msbuild/msbuild project) to build Cordova Project created with Visual Studio Tools for Apache Cordova?

I use Visual Studio to create Cordova projects. I need to build Cordova projects using msbuild and buildbot via script for my project but I can find only information about how VS combine with Cordova CLI to build multi device hybrid application.

Hi Samseth,
Yes, correct, the only thing we can find on the MSDN is:
Deploy and Run Your App
And that's the reason why Visual Studio Tools for Apache Cordova existing.
I think you may get more detail compile information from here:
http://cordova.apache.org/docs/en/4.0.0/guide_cli_index.md.html
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Not able to properly install "Tools for Apache Cordova for Visual Studio 2013"

Hi,
I am using visual studio 2013 ultimate running on a 64-bit windows 7 home premium.
When I tried to install the "Tools for Apache Cordova for Visual Studio 2013", the installation completed but showed the following error in the end. This is what the error says:
" Joyent Node.js
Invalid command line argument. Consult the Windows Installer SDK for detailed command line help. "
I thought maybe windows phone SDK 8 is not installed on my pc.( as mentioned in the requirements here: https://msdn.microsoft.com/en-in/library/dn757054.aspx). I tried to install the SDK, by choosing modify from the control panel (as
mentioned in the same link above), but it didn't show "Windows Phone SDK" on the list. And Microsoft says that you cannot install the SDK v8.0 on windows 7. Please help me with this.

OK...
1) So, how do I write JavaScript code? There is only one option when I select JavaScript form the "New Project" window and that says "Blank App (Apache Cordova)". when I try to create one it shows all these errors:
" We've detected issues with your system's environment configuration
Apple iTunes - software is missing from your computer.
WebSocket4Net - software is missing from you computer. You may also have to configure it after installation."
2) I don't have iTunes on my computer. So, Is there a way to do it without installing iTunes?
3) And I've already installed the "WebSocket4Net", using both the "vs2013_mda0.3" setup and manually. But nothing worked. So what to do about it.?

Org.apache.jasper.JasperException: Unable to compile class...

Dear all,
I've used java.util.List in my jsp, but when I import the package into the jsp, the following error occurs, please help:
Type: Exception Report
Message: Internal Server Error
Exception
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
C:\Sun\AppServer7\domains\domain1\server1\generated\jsp\j2ee-modules\EmailTracker2\_jasper\_index_jsp.java:14: class jasper.index_jsp must be declared abstract. It does not define java.util.List getIncludes() from class org.apache.jasper.runtime.HttpJspBase.
public class indexjsp extends HttpJspBase {
^
1 error, 1 warning
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:312)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:641)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.access$000(JspServlet.java:501)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:322)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:287)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

Hi,
I am using J2EE SDK 1.4 Server and deployed a Stateless Session Bean and used a JSP page as Web Deployment component. When I deploy the application no error is given but when I access application using the given web context name the following error is displayed on the browser.
type Exception report
message
description The server encountered an internal error () that prevented
it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
No Java compiler was found to compile the generated source for the JSP.
This can usually be solved by copying manually
$JAVA_HOME/lib/tools.jar from the JDK
to the common/lib directory of the Tomcat server, followed by a Tomcat restart.
If using an alternate Java compiler, please check its installation and
access path.
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:132)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:356)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:420)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:463)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:444)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:557)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:305)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
Can anyone tell me why this error could be generated? I've given the JAVA_HOME environment variable value as C:\Sun\AppServer\jdk and J2EE_HOME variable value as C:\Sun\AppServer.

I download dmg files but cannot be open (not recognised). If I try try to use disk utility, it says the disk image unable to attach. Could someone pls help? Thnx

Hi, I am trying to install some programs (on mac book pro mac osx 10.6.8) that are downloaded in "dmg" file format. These are antivirus and security related programs. Unfortunately when I try to open the downloaded file, this does not open and I get message it is not recognised. I have also tried using Disk Utility but I get an error "unable to attach"l. This just started recently. I have downloaded the file several times but same problem recurs. Thanks for your help
PS: Other files directly downloaded from apple work fine.

umjustme wrote:
curious to know your reservations about Kapersky!
They screwed up the first Flashback removal tool very badly, locking several users out of their accounts permanently. It took a day or so for them to react and post a revised tool, but the damage had been done.
They are one of several formerly PC only vendors who rushed to the Mac front back in the spring after the Flashback scare. I would advise giving all of those folks time to prove they really understand OS X before installing it on any of my Macs. There are several others who have proven themselves.
Since you are running what I assume to be a fully up-to-date OS X 10.6.8 you are not vulnerable to any currently known malware capable of impacting OS X or other Mac software. That's no guarantee there won't be something new show up tomorrow, but the chances of any commercial anti-malware software catching it before Apple can react is pretty slim, IMHO.
Now if you are concerned about Windows malware, that's a different story.

How to solve this problem in Visual Studio 2013 Community with Apache Cordova

I'm trying to run an application in VisualStudio2013
community with Apache Cordova
and I'm getting a lot of error messages.
Any ideia about this?
Regards,
Samambaia Jr.

What version of the VS Cordova Extension are you using? CTP3.0? It looks like your node packages didn't get installed properly. Try clearing the Cordova Cache (Tools/Options/Tools for Apache Cordova/Cordova Tools). After
that, reload your project and rebuild.
-Ellen

I've been unable to attach documents to my e-mails for the past week, yet I can with IE.

I use Firefox 20.0.1 and Yahoo Mail through AT&T. For the past month, I've been unable to attach documents to my e-mails whether I use the the "Attach" button at the bottom of my mail, or the button at the top. But, here's the rub: when I use IE version 9 with Yahoo, I am able to attach. It would seem to me to be a browser problem. What do you think?
-Dick Carr

Does that uploader use a plugin like Silverlight or Flash?
*https://support.mozilla.org/kb/Troubleshooting+plugins
Note that Firefox Safe Mode doesn't affect plugins.
*preferences are not affected
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Kernel 2.6.25 upgrade = MadWifi: unable to attach hardware [SOLVED]

Hello,
After I upgraded my kernel to 2.6.25 on my laptop with an Atheros AR242x, which I use normally use MadWifi with, stopped working. I am unable to get any wifi0 or ath0 device to show up in ifconfig. The most descriptive error I could pull up was "MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)" out of dmesg, which you can see below. It was suggested in the IRC channel I compile MadWifi from testing out of abs which I did but it didn't seem to change anything.
Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Apr 19 15:39:26 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
BIOS-e820: 0000000037e80000 - 0000000037e92000 (ACPI data)
BIOS-e820: 0000000037e92000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000038000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
894MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f7c60] 000f7c60
Entering add_active_range(0, 0, 228992) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 228992
HighMem 228992 -> 228992
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 228992
On node 0 totalpages: 228992
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1757 pages used for memmap
Normal zone: 223139 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7BB0, 0014 (r0 TOSINV)
ACPI: RSDT 37E8AD9E, 0040 (r1 TOSINV TOSINV00 6040000 LTP 0)
ACPI: FACP 37E91D8A, 0074 (r1 TOSINV Bonefish 6040000 ATI F4240)
ACPI: DSDT 37E8BAC8, 62C2 (r1 TOSINV SB450 6040000 MSFT 100000E)
ACPI: FACS 37E92FC0, 0040
ACPI: APIC 37E91DFE, 0050 (r1 TOSINV APIC 6040000 LTP 0)
ACPI: SLIC 37E91E4E, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
ACPI: MCFG 37E91FC4, 003C (r1 TOSINV MCFG 6040000 LTP 0)
ACPI: SSDT 37E8B5B0, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
ACPI: SSDT 37E8B351, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
ACPI: SSDT 37E8ADDE, 0573 (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: DMI detected: Toshiba
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 38000000:a8000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227203
Kernel command line: root=/dev/sda1 ro vga=773
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1729.253 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902908k/915968k available (2075k kernel code, 12516k reserved, 712k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7e80000 ( 894 MB)
.init : 0xc03bf000 - 0xc0402000 ( 268 kB)
.data : 0xc0306cf8 - 0xc03b8e80 ( 712 kB)
.text : 0xc0100000 - 0xc0306cf8 (2075 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3462.16 BogoMIPS (lpj=5768270)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c
Total of 1 processors activated (3462.16 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x220-0x22f has been reserved
system 00:08: ioport range 0x400-0x401 has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: ioport range 0x8210-0x821f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:09: iomem range 0x0-0xfff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: 0xc0000000-0xc00fffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: 0xc0100000-0xc01fffff
PREFETCH window: disabled.
PCI: Bus 6, cardbus bridge: 0000:05:06.0
IO window: 0x0000a800-0x0000a8ff
IO window: 0x0000ac00-0x0000acff
PREFETCH window: 0x40000000-0x43ffffff
MEM window: 0x44000000-0x47ffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: 0xc0200000-0xc02fffff
PREFETCH window: 0x0000000040000000-0x0000000043ffffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Enabling device 0000:05:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 23
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 541k freed
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=169
vesafb: protected mode interface info at c000:52fd
vesafb: pmi: set display start = c00c536b, set palette = c00c53a5
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:14.1 to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
Switched to high resolution mode on CPU 0
ata2.00: ATAPI: PIONEER DVD-RW DVR-K17A, 1.50, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17A 1.50 PQ: 0 ANSI: 5
sata_sil 0000:00:12.0: version 2.3
PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc0507080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc05070c0 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 < sda5 > sda3
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ACPI: AC Adapter [ADP0] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FAN0] to D3
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN0] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (59 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [f78183d8] 'on'
ACPI: Thermal Zone [TZ01] (56 C)
Marking TSC unstable due to: TSC halts in idle.
sr 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: found ejectable bay
ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D0] Added
ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: found ejectable bay
ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D1] Added
Linux agpgart interface v0.103
ACPI: device:1f is registered as cooling_device2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Video Bus as /class/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0504000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
8139too Fast Ethernet driver 0.9.28
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0506000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
eth0: RealTek RTL8139 at 0xf8b24800, 00:a0:d1:6d:dc:08, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0505000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Symbol init_mm is marked as UNUSED, however this module is using it.
This symbol will go away in the future.
Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[fglrx] Maximum main memory to use for locked dma buffers: 802 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:06.0, mfunc 0x01111002, devctl 0x44
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input7
Yenta: ISA IRQ mask 0x0ef8, PCI irq 23
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
ath5k_pci 0000:02:00.0: registered as 'phy0'
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ath5k phy0: failed to resume the MAC Chip
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ath5k_pci: probe of 0000:02:00.0 failed with error -5
ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0200000-c02007ff] Max Packet=[2048] IR/IT contexts=[4/8]
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
wlan: trunk
ath_pci: trunk
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)
ACPI: PCI interrupt for device 0000:02:00.0 disabled
EXT3 FS on sda1, internal journal
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device sda5): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d16ddc08]
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Last edited by JesseC (2008-04-25 17:25:52)

tomk wrote:
Thanks, I'll add it to my collection.
I expect you blacklisted ath5k, right? Better the devil you know and all that, but I would give ath5k a try sometime. It's in mainline, and will eventually replace madwifi altogether.
Yes I did, I eventually will have to go to ath5k but currently madwifi works without a problem so I see no real reason to move over at the moment. In other words, I'll let someone else be the beta tester on that project

I am unable to attach PDFs to Hotmail/Outlook email using my FF browser today. Never had issue before today.

1. I am unable to attach pdfs today in Outlook/Hotmail email using my Firefox browser (27.0.1). I keep getting an error message that says, "The file is not a picture and can't be inserted inline." I do not understand why I keep getting this error message. I am not attempting to insert an image. I am selecting to Insert Files as Attachments from the drop down menu.
No matter how many times I attempt to attach various pdfs to my emails today using Firefox as my browser, I keep getting this same error message. I have cleared the cache, cleared all cookies, cleared all history, signed out of my Hotmail/Outlook account, signed back in, restarted computer, etc., to no avail. Same problem.
2. I switched to my Safari browser, and have no problem attaching pdfs in my Hotmail/Outlook email account. The pdfs are attaching perfectly as usual. My emails are being sent normally with the attachments. The attached pdfs are being received and are opening perfectly as intended.
3. Why am I unable to attach files with Firefox today? Firefox is my browser of choice and I have used it with my Hotmail/Outlook email account without any problems, till today. Please help me! Thank you!

Thank you jscher2000. Yes my PDFs do contain the .pdf extension. I tried your excellent idea to utilize the drag and drop method, but I still get the same error message with PDFs. I have no problem attaching photos or Word documents with either method; just PDFs.
For further diagnostics, I started composing my email in Safari, attached all my pdfs and saved my email as a Draft. I then went to Firefox, opened the draft to continue working on it, and voila! There are all the pdfs I attached previously while in Safari. I was able to send the email with attachments through Firefox with no issues. The attachments went through and were able to be opened.
I am mystified, as Firefox has been trouble-free with my email account, and I have never had this particular issue till today. I made no changes to anything else on my computer, but I did notice very late last night that Outlook had one of those typical messages at the top of my Inbox to refresh my browser since Outlook had been updated. I refreshed and shut down for the night, and when I rebooted this morning that is when I discovered this brand new glitch with attachments. I'm assuming this has something to do their last update.

Boot camp no longer on startup disk bless tool unable to set boot disk

iOS 10.6.8 boot camp no longer on startup disk msg says 'bless tool unable to set boot disk'

solved my own problem. a simple restart did the trick.

Unable to attach HP LaserJet 1018 printer

Unable to attach HP LaserJet 1018 printer

Download the latest Driver and install it could solve the problem.
http://support.apple.com/kb/DL907

ORA-27123 unable to attach shared memory segment

Running oracle 8.1.5.0.0 on Redhat 6.0 with kernel 2.2.12, I keep getting the error ORA-27123 unable to attach shared memory segment when trying to startup and instance with an SGA > 150 MB or so. I have modified the shmmax and shmall kernel parameters via the /proc/sys interface. The relevant output of ipcs -l is below:
------ Shared Memory Limits --------
max number of segments = 128
max seg size (kbytes) = 976562
max total shared memory (kbytes) = 16777216
min seg size (bytes) = 1
This system has 2gb of physical memory and is doing nothing except oracle.
I changed the shmmax and shmall parameters after the instance was created, was their something I needed to do to inform Oracle of the changes?

High JW,
i had the same problem on my installation.
The solution is written in the Oracle8i Administrator Refernece on page 1-26 "Relocating the SGA"
a) determine the valid adress range for Shared Memory with:
$ tstshm
in the output Lowest & Highest SHM indicate the valid adress range
b) run genksms to generate the file ksms.s
$ cd $ORACLE_HOME/rdbms/lib
$ $ORACLE_HOME/bin/genksms -b "sga_beginn_adress" > ksms.s
c) shut down any instance
d) rebuilt the oracle exe in $ORACLE_HOME/rdbms/lib
$ make -f ins_rdbms.mk ksms.o
$ make -f ins_rdbms.mk ioracle
the result is a new oracle kernel that loads the SGA at the adress specified in "sga_beginn_adress".
regards
Gerhard

I am unable to attach documents to a yahoo email from my macbook pro can anyone advice me what i need to do to address this please?

Hi there;
For some reason I am unable to attach documents to a yahoo email from my macbook pro. I do not experience this problem on a nomal PC and i can even open attachments on the mac. However on trying to attach a document to an email it keeps coming up wth an error stating ''invalid file selected'' each time i tr. Can anyone advice me what i need to do to address this please?
many thanks

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

Unable to attach documents in Edit mode of Reply to a Discussion

Hi SCN,
I am unable to attach documents in Edit mode of Reply to a Discussion (No Choose file button). Is it a bug or a specific case due to some circumstances?
Referring to thread How to maintain total asset price where I was trying to replace an attached file (It was being removed but no way to attach)
Jogeswara Rao K

I am able to see the Choose File option.
I'll first post this reply.
Then open it in edit mode to try attaching a file image.
Image can be attached as well as embedded.

Apache Cordova Tool - Unable To Attach

Similar Messages

Maybe you are looking for