Apache Directory Server as data source for Portal UME?

Hi,
Has anyone tried using Apache Directory Server as a Data Source for Portal UME? We would like to try that out. If anyone has tried before I would like to get the data source configuration file. ALso would like to know more in detail about the positives and negatives.
Thanks for your help.
Regards,
Vishnupriya

try to configure as stated in the following document.
http://help.sap.com/saphelp_nw04/helpdata/en/18/5cea2296190e4cb7faf9468ad793ea/content.htm
I have seen several discussions on sdn on the same, also make a keyward search on sdn.
Also check this for pros and cons for having Apache ...
Problem while configuring the Apache Web Server as the Intermediary Server
Edited by: SJ on Aug 3, 2008 10:11 AM

Similar Messages

CUA as data source for portal UME

Hi all
We want to use the CUA system as the data source for our EP6's UME.
Obviously our end users do not login to the CUA system and therefore have no password to this system. It doesn't seem rational to provide them a password to this system, but then again which password will they use?
I'm guessing that this is the case for most of the SAP customers.
Does this mean that we can't use the CUA as the UME data source?
If any of you use the CUA as the UME, we'd be very glad to hear your solution to this situation (we can't use one of the child systems as the UME).
Thanks,
Yeti

Hi Yeti,
My remarks below will not answer your question but it will help you with some decision on your UME data source.
As far as I know, most Portal use LDAP as their main UME datasource. This is largely due to the fact that LDAP contains ALL the users that are "employee" of the company. As for CUA, it does not contain ALL your users which could pose a problem for you when you want to execute certain Portal functions (or management approval flows) which require users who does not exist in your CUA (but exist in LDAP).
3 presentations which I think its good to have a look and share with....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d5f57332-0a01-0010-12ab-dd472e87b8e6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c477de90-0201-0010-35ab-ddac4448ba9f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706065c4-3564-2a10-2382-a52fcbd7eefb
But there are also setup that uses CUA as their UME. I have linked some of the past threads who use CUA as their UME. I hope they can shine some light to your question. You can do a search here in the forum with "CUA UME portal" and you will also find posts that can help answer your question.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e
Solution Manager as a source for Portal UME
Multiple SAP Systems as UME
EP
Something to think about if you consider SSO with CUA as UME.
how to sso between portal and abap
Something more interesting to read about:
LDAP connection from ABAP to Portal
The above are base on my experience and the Portal setup which I have done for the company. But maybe there are better suggestions from other Portal guys,Experts,Gurus out here who will contribute to answer your question.
Hope that helps.
Ray

SQL server as data source for OBI EE : Urgent

hi everyone,i have been using OBI EE for the past 2 months.I have been using Oracle 10g database as a data source for OBI EE and it worked just fine and now im trying to use SQL server 2005 as my data source.
My ODBC was succesful and i can import from that database but i get following errors when i try to update row count.
There was an error while updating row count for "test"."AdventureWorks"."HumanResources"."Departme nt":
[nQSError: 16001]ODBC error state: S0002 code: 208 message :[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'Department'..
[nQSError: 16015]SQL statement execution failed.
Shahzad

With Sql Server I have always problems with security
Check this first and then continue..
1.your odbc connection
2.in the administrator--> connection pool you have assign the appropriate values for sql -server(check all the options)
and check the option -->fully qualified table name
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Solution Manager as a source for Portal UME

Is it possible to to configure in EP 7, that UME source is Solman Abap clietn? We are using Solman as central CUA client too. Can one ABAP system can be user source for several ABAP?
Thank You
Vladimit

Hi Vladimir
It is possible to use Sol Man as your User Data Source.
Also one ABAP system can act as a source for several other abap based systems.
Check this out:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/622441cd87a12be10000000a1550b0/frameset.htm
Cheers.

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Using Oracle BI Server as a Data Source for Third Party Tools

I have been researching how to use the Oracle BI Server as a data source for two days now. I have not yet found a solution to my problem.
We have a remote user who is pulling data from one of our Oracle databases using automated tools. This data base is essentially being replaced by Oracle Analytics. However, we do not want this user to get at the physical tables of Analytics, rather, we want the user to be able to connect to the Oracle BI Server itself, and issue Logical SQL to pull data.
Here are the requirements which I need to be fulfilled:
1) The ability for a remote user to connect to the BI Server as a data source.
2) The remote user must be able to do this on a Unix box.
3) The remote user must be able to automate the process of issuing SQL to the BI Server. (Command line interface is preferable)
4) The solution needs to be easily implementable, that is, this solution will be implemented many times over.
I found many articles explaining how to set up a Windows box to connect to the BI Server in this way. However, these articles outline how to use tools like Excel and Microsoft Query to pull data from the BI Server. Our current user is using SQLplus.
If possible, I would like the user to continue using SQLplus as the tool for connecting to and retriving information from our BI Server. I have tested using SQLplus many different ways to no avail. I have also tried using other tools, such as Oracle SQL Developer.
Is there a program out there that will fulfill the needs I have outlined above? Or, does someone know of a way to use SQLplus to connect to the Oracle BI Server as a data source? Or, is there a series of solutions which will fulfill the needs outlined above?
Edited by: user11177366 on Jun 11, 2009 11:46 AM

I agree it would be inefficient but only because you are using OBIEE for something it was not designed to do. You are basically asking for a "DB feed" and that should designed using PL/SQL, DB Links, Web Services or whatever is your entreprise standard to send data from one system to another. Using OBIEE for this seems a bad architecture decision to me.You are correct, the BI Server is not really intended to be queried like another Oracle Database remotely. However, the reason we are trying to do it this way is twofold:
1) We want to enforce data level security.
2) The BI Server has been fine tuned for high performance.
Forcing the end users to go through the BI Server rather than directly to the physical tables or other sorts of systems built on top solves both of these issues.
I think you are wrong. I don't see why SQLPlus should be able to query the BI Server. The BI Server can sit on top of many different DBs not just Oracle, even flat files etc. So you can't really expect the BI Server to able to translate all that into Oracle SQL output so you can query it using SQLPlus. The BI Server is not an Oracle RDBMS.You're right again. The BI Server isn't an Oracle RDBMS, and I have been wanting to treat it like one. From the data I have gathered SQLPlus can't query the BI Server.
However, my research has led me to realize that the BI Server supports the JDBC API. Therefore, (I should have went down this route in the first place) one can use the JDBC driver provided by Oracle (bijdbc14.jar) to interface with the BI Server. There are many programs and applications out there that support the JDBC API and let us connect to BI Server the way we want to. Furthermore, these programs are mostly platform independent, as they are mostly written in Java.
Lastly, from what I understand the NQCMD program can be installed on any platform as well (provided by Oracle). This is another option to connect to the BI Server as well.
Thanks for your help and your comments as I went through this process of discovery.

How to configure data source for MS SQL 2005 Server.

Good morning,
While creating a data source for MS SQL 2005 Server, what are the values I should use for:
Object Factory, DataSource Type, and CPDS Class Name values ?
Thanks
Seenu

seenuFour wrote:
Hi,
I am working on a web application, the backend of which is a MS SQL 2005 server. I am creating a data source on the application server to manage the connection pool.
Hence I need to give the following values while creating the data source:...
Hence you need to provide some actual detail about what the context is.
IIS runs "web applications" but your question would have no meaning in that context. On the other hand it might have some meaning if you were running Tomcat.

Data source for reports

hi all,
we r using 10g application server along with the reports service to deploy J2EE application
The data source for the application is specified using the JNDI lookup
Is it possible to use the same strategy for reports as well.
i.e., we are using jdbcpds. so is it ok if i give the JNDI look up name as P_JDBCPDS
If not is there any other way to make the P_JDBCPDS connection generic, so that i can change the username and database name without having to change the cgicmd.dat file
Any help is greatly appreciated.
Thanks & regards,
Ramakrishna

If it is intended to be accessible from Reports servlet then you can use "ssoconn" command line option where by the user name and password is stored in OID (Oracle Internet Directory)
Pls see publishing reports to web document --> command line options -> rwservlet
(link below)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

SAP Data Source for OmniPortlet available for download

What are we Announcing ?
The beta release of SAP Data Source for OmniPortlet.
SAP data source for OmniPortlet makes it easier than ever before to integrate SAP R/3 systems with Oracle Application Server(OracleAS) Portal. With the new SAP data source, one can easily build SAP portlets including search for BAPI Function Modules and Business Objects, configuration of appropriate input and output parameters, filteration criteria, desired views and layouts, portlet personalization, and even portlet-to-portlet communication using parameters and events.
How can I use it?
SAP Data Source is a plugin data source for OmniPortlet. You can connect to any SAP R/3 server and declaratively build SAP portlets with ease. In addition to all the basic features of OmniPortlet, SAP data source leverages OracleAS Portal External Application for secure access to the SAP R/3 instance. SAP data source comes as a zip file, with very simple steps to configure. Learn more about this data source from http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDKRELEASE2/PDKHOME902/SAMPLES/SOLUTIONS/UPLOADAREA/SAPDS/VIEWLET/SAP_DS_VIEWLET_JAN05_VIEWLET_SWF.HTML
How do I get it?
This data source is available through the Portal Integration Solutions page on Portal Studio. You would be asked to enter your OTN user details to download the data source.
Portal Integrations Page: http://portalstudio.oracle.com/servlet/page?_pageid=3191&_dad=ops&_schema=OPSTUDIO
We are keen to service any issues that you might have while using this data source. Please post your feedback/concerns/issues on the "Portal Developer Kit" forum.
Regards,
Abhinav

Hi,
please find the below data source
2LIS_03_UM - stock revaluation.
2LIS_03_BF- goods movement.
2LIS_03_BX- stock initialization.
please find the below doc, it is helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?overridelayout=t…
Thanks,
Phani.

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

OIM 9.1.0.2 - Weblogic JDBC Multi Data Sources for Oracle RAC

Does OIM OIM 9.1.0.2 BP07 support Weblogic JDBC Multi Data Sources (Services>JDBC>Multi Data Sources) for Oracle RAC instead of inserting the "Oracle RAC JDBC URL" on JDBC Data Sources for xlDS and xlXADS (Services>JDBC>Data Sources> xlDS|xlXADS > Connection Poll> URL) ?
If yes, is there are any other modifications that need to be made on OIM, or just changing the data sources?

Yes, it's supported. You install against one instance directly of the Rac Server. Then you update the config.xml file and the jdbc resource in your weblogic server with the full rac address. It is documented for installation against RAC. http://docs.oracle.com/cd/E14049_01/doc.9101/e14047/database.htm#insertedID2
-Kevin

Setting up csv files as a data source for Hyperion intelligence explorer on Windows 7

Hi. wondering anyone can point me to a resource or supply me with step son how to Set up csv files as a data source for Hyperion intelligence explorer on Windows 7?
I used to be able to do it in WXP, but it seems thing shave really changed with W7..... Absolutely desperate... All and any help welcome.....

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

Stored Procedure used as a data source for an Apex report

Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ?
Thank you.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "920338".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ? When asking a question about "reports" it's firstly essential to differentiate between standard and interactive reports. Standard reports can be based on tables, views, SQL queries, or PL/SQL function blocks that return the text of a SQL query. Interactive reports can only be based on a SQL query.
"Stored Procedures" are therefore not an option (unless you are using the term loosely to describe any PL/SQL program unit located in the database, thus including functions). What would a procedure used as the source of a report actually do? Hypothetically, by what mechanisms would the procedure (a) capture/select/generate data; and (b) make this data available for use in an APEX report? Why do you want to base a report on a procedure?

Apache Directory Server as data source for Portal UME?

Similar Messages

Maybe you are looking for