Apache Hangs after 1.0.2.1 upgrade

I've upgraded to iAS 1.0.2.1 from 1.0.2 on NT. The apache listener comes up okay on startup. When I try to access a portal configuration though the browser just hangs until it times out. There is no error message returned to me. This behavior exists when trying to connect to a portal 3.0.7 install that worked under the old 1.0.2 install as well as a fresh 3.0.8 portal install that I created with the new Portal Configuration Wizard.
The behavior is such that when I try to access the portal page the disk drive cranks and the CPU spikes for about 5 seconds and then it just sits there. If the database is not running I get an error message so the inital call is probably making some sort of DB contact, however no Portal Homepage. Any suggestions are very welcome.null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Rinebold ([email protected]):
I just upgraded from 1.0.2.0 and have the same issue. So I uninstalled the 1.0.2.0 instance and did a fresh install and it still hangs trying to get to the public home page. All of the config pages work ok.
What is up with this?
msr<HR></BLOCKQUOTE>
I logged a tar with Oracle support and it turned out my problem was with duplicate entries in the zone.properties file. Here is the fix from Oracle Support.
I see serveral duplicate entries in the zone.properties. The following are the lines that have duplicates. Check to see if I missed any and then remove the duplicates. After that bounce the http listener.
repositories=D:\Oracle\iSuites\Apache\Jserv\servlets\Parallel.jar
repositories=D:\Oracle\iSuites\Apache\Jserv\servlets\ChartServlet.jar
repositories=D:\Oracle\iSuites\Apache\Jserv\servlets\AppLoader.jar
servlet.page.code=oracle.webdb.page.ParallelServlet
servlet.chart.code=oracle.webdb.chart.ChartServlet
servlet.apploader.code=oracle.webdb.apploader.AppLoaderServlet
servlet.ojsp.code=oracle.jsp.JspServlet
null

Similar Messages

Mapping execution hangs after 10.1.0.4 upgrade

Hi,
The following has been upgraded :- OWB from 10.1.0.2 to 10.1.0.4, Workflow from 2.6.2 to 2.6.4 and DB from 9.0.2 to 10.2. After all this I had problems executing process flows, I re-registered the location for these and re-deployed the pf;pws and they execute now. I cannot execute mappings directly until I re-deploy them. I have hundreds of mappings, they seem to be okay being run by pflows but I am not sure if some get run by themselves , in which case it looks like they will fail if they are not deployed. Has anyone come across this behaviour after the 10.1..0.4 upgrade, is it normal to have to re-deploy all mappings and pflows after upgrade ??
Thanks for any assistance !
Cheers,
Brandon

Thanks Borkur, I may do the same here, problem with my repository is that some mappings fail when trying to re-deploy but the current pl/sql in the target is executing fine so I will have to fix the deployment errors before I can deploy these (db links arent being added to the remote objects). Was hoping not to have to re-deploy all the mappings but I agree may be best to be safe.
Cheers,
Brandon

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

Upgrade to Solaris 10/08 hangs after reboot

I upgraded to Solaris 10 10/08 however the system hangs after reboot.
I had never any issues with its previous versions. Any thoughts?

To be sure I upgraded to the latest BIOS.
Both kernel debugger and single user mode do not work.
This seems like a serious issue in my opinion.

Adobe apps hang after upgrade to Yosemite

Adobe apps hang after upgrade to Yosemite - requires force quit and reopen...any advice?

thanks, Kurt...we'll see...I upgraded to Yosemite so I could load the newer Adobe CC anyway - I'll upgrade the suite to the cloud and see what happens

Firefox hangs after answering yes to Firefox 4 upgrade

Today when My wife started Firefox from her account she was presented with a window asking if she wanted to update to Firefox 4. She answered yes. At that point Firefox (v3.6.16) became unresponsive with no indication that anything was happening. After some time she tried to shut down Firefox by clicking the X in the upper right corner of the window. She then got the Windows End Program box stating that the program was not responding and allowing her to shut the program down.
She then restarted Firefox and after what seemed to be a normal start up with the home page being displayed, Firefox would again hang after selecting a bookmarked site.
When my wife called my attention to this problem, I decided to try it from my Windows XP account to see if the problem only happened in her account. When I first opened Firefox, I briefly saw a progress bar indicating Firefox was being updated. Firefax then opened and loaded two tabs, my home page which is set to the google.com/firefox start page and the same Firefox 4 anouncement page that my wife got when she first started Firefox. When I then selected most bookmarked web sites or even the Firefox Support link on the home page, Firefox would hang and require ending the task to exit. Terminating Firefox in this manner, and restarting Firefox produced the same result. Rebooting the PC after terminating Firefox also produced the same result. Using IE8 to visit the same web sites was successful and resulted in no hangups. In fact, I am currently using IE8 to post this question.
After restarting and trying many web sites, I did find some sites that opened normally. One was the About Mozilla link on the home page and another was a local weather site: wunderground.com.
I also ran Firefox in safe mode from the command line and got the same hanging which I understand indicates that the problem is not being caused by any plugins or extensions.
Any suggestions as to how I can fix this problem would be greatly appreciated.

Thanks for the suggestions. As it turned out Firefox seemed to fix itself!!! First I must add that I don't believe that my wife clicking on the Firefox 4 update button had anything to do with the hangups. There was no indication that anything had been downloaded. Firefox would start normally but hang when trying to load most web sites. Usually a progress bar would be displayed at the bottom of the page that would never completely load. Clicking on the "Stop loading this page" button would only result in the Firefox symbol at the top left corner turning to a white square and Firefox would become non-responsive requiring an end task to shut down. It acted like an Internet problem but as I reported before, when I tried the same sites in IE they loaded properly. Also rebooting had no immediate effect.
As I kept trying in my account, more and more web sites started to load properly. After a couple of days, there were no more hang ups occurring at all in my account. The only changes I had made was to disable a couple of extensions: DownloadHelper and Freecorder Community Toolbar in my account. These were never installed in my wife's account and had no immediate effect after disabling them. Unfortunately, Firefox would still hang in my wife's account. She had changed the default browser to IE and when I opened Firefox in her account I got the message box asking if I wanted to change the default to Firefox. At that point clicking on anything resulted in a hang as before. I even tried setting the default browser back to Firefox in Windows "Set Program Access and Defaults" and rebooting but got the same result when I tried running Firefox again.
Now, after doing nothing to Firefox for a couple of days, Firefox is working correctly in both accounts??? I did notice a lot of hard drive activity during the time I was working this problem. Hmmm.
I use Norton 360 v4 as my security protection on this machine. They have now released v5 which I am about to upgrade to. I wonder if their LiveUpdate was doing something that affected Firefox?
I think I will wait awhile before trying to update to Firefox 4.

Check Writer Hangs after 10G database upgrade

Hi Gurus,
Can anybody let me know how i can trace check writer concurrent process.
It seems to hang after we upgraded the database to 10g version.
Thanks,
S.

The log file shows
/u31/oracle/fimsprodappl/pay/11.5.0/bin/PYUGEN
Program was terminated by signal 11
Should i do some thing with PYUGEN (rebuild/relink) after 10G database upgrade.
We are on HP-UX 11 (PA-RISC) 64 bit.
S

Safari hangs After upgrade to 10.5.6

After I upgraded to 10.5.6 last night I have been unable to use Safari. Safari just hangs after imediately opening. Firefox works just fine. Anybody having this issue after the OS upgrade? I am at a loss of what to do.
Thanks,
Matthew

I had the same issue after instilling a security update. (Running 10.5.6 already)
Safari would simply hang when trying to load websites with external resources such as CSS and SWF files - Google lagging such resources, worked perfectly - But navigating to other websites would lock up the browser. To solve the issues I tried the following;
- Running software update again, installing everything missing.
- Downloading and reinstalling Safari manually
- Downloading and reinstalling newest version of flash.
- Downloading newest build of webkit - which also locked up.
- Rebooting (Doh)
Nothing of the above worked; then I found this thread and noticed one thing I had not tried - Resetting safari!
Started safari and hit ESC immediately to stop safari loading anything.
Safari -> Reset Safari -> Check all checkboxes -> Reset.
Success; this message is written using my new working Safari!
In hindsight I should have reset each of the options separately to narrow down the bug. But I was not in a debugging mood at the time.
Chris
Message was edited by: Benjaminsen

Satellite U400-22n and Win7 - screen hangs after 5 min

Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

Forms gets hang after 15 mins in 11.5.10.2

Hi,
I have cloned an instance from production. Now my forms in production are getting hanged after 15 mins but the development instance is running fine. The EBS version is 11.5.10.2. Linux RedHat 4.0. Jserv 1.1.
Everytime this is happening at 15-20 mins interval. I have seen the log files in iAS_HOME/Apache but they are clean.
Can anyone plz help on this.
Thanks.
Neeraj.

Rapid Clone does not modify the source system. adpreclone.pl prepares the source system to be cloned by collecting information about the database and creating generic templates of files containing source specific hardcoded values.
I suggest you use Forms Runtime Diagnostics (FRD) to debug the issue, for more details on how to use it please check Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=150168.1

I have 10.8.3 installed. I use Cisco VPN but this hangs after 57 minutes and 35 seconds. I disconnect but can't reconnect straight away but have to wait about 10 minutes then have another 57 minutes

I use a mac with 10.8.3 installed. I use Cisco VPN & citrix receiver to connect to work via my home wireless which connects & works brilliantly but then hangs after 57 minutes and about 35 seconds. I disconnect but can't reconnect straight away although it goes through the motions but doesn't find a connection. I have to wait about 10 minutes (or restart the MAC) then it connects fine again and I have another 57 minutes. I previously used 10.6 for a while without any problems and then the VPN just stopped connecting? after trying to resolve without success I upgraded the OS hoping that this might fix the issue which it has but created this other problem! I can live with it but thought there may be some way to correct this surely. I'm not heavily technically minded and have read reports about the racoon service may be causing this but not sure how you do this very simply step by step
Thank you for any ideas you can give

I use a mac with 10.8.3 installed. I use Cisco VPN & citrix receiver to connect to work via my home wireless which connects & works brilliantly but then hangs after 57 minutes and about 35 seconds. I disconnect but can't reconnect straight away although it goes through the motions but doesn't find a connection. I have to wait about 10 minutes (or restart the MAC) then it connects fine again and I have another 57 minutes. I previously used 10.6 for a while without any problems and then the VPN just stopped connecting? after trying to resolve without success I upgraded the OS hoping that this might fix the issue which it has but created this other problem! I can live with it but thought there may be some way to correct this surely. I'm not heavily technically minded and have read reports about the racoon service may be causing this but not sure how you do this very simply step by step
Thank you for any ideas you can give

Safari hangs after 10.4.7 update

When I was running 10.4.6, Firefox and Safari were comparible in speed.
After I upgraded to 10.4.7, I'll enter a URL or click a link to another page, and Safari will just kinda hang after loading about half of the items on a page (according to the progress bar at the bottom). Usually if I re-request a page (clicking a link a second time, or re-entering the URL) the page will load completely. Firefox loads all pages as it did before.
I've done all the permissions repair thingys.
I've tried upgrading my flash player to flash 9 (just came out today, I think) but it didn't help, though flash 9 seems to now allow me to view spiketv.com videos that I wasn't able to see before.
I also did a "Reset Safari", and I think it helped a little, but the hanging problem persists.
Has anyone else experienced this since upgrading to 10.4.7?

I'm suffering from the same problem but it started a few days ago without me installing 10.4.7. It just hangs while downloading web pages. I don't mean the browser app hangs - I can still access menus. It just fails to download web pages. This will typically happen after, say, 30 minutes of use. I have reset Safari, switched of Java and Javascript, and it all has no effect. If I quit Safari and restart it cures the problem for a short while. If I disconnect from my wireless network and reconnect it has no effect. Meanwhile Firefox works fine so that's the browser I'll use until Apple fix Safari. The hang can happen mid-page, and then from that point no pages in any tabs will download.

ITunes "hangs" after playing first two tracks

Testing with three different CDs, I have discovered that my iTunes "hangs" after playing the first two tracks. That is, it will play the first two tracks fine, then appear to play the first two seconds of the second track again and stop. I am also unable to eject the CD or quit the program, instead getting the Spinning Beach Ball of Death, so I must force-quit the program, after which I am able to eject the CD.
I have repaired the disk permissions and verified the disk with no problem in both cases. I have also shut down and restarted a few times between tests, but to no avail. I hope this issue is not an indication of a physical problem with my drive. (I have not tried running Disk Warrior yet, but that may be my next step.) Also, this problem occurred both before and after I upgraded to 10.4.11 so it seems to be unrelated to this OS upgrade, but it may be related to my upgrading to iTunes 7.5. Any ideas or suggestions?
Thanks,
Paul

Yep, that did the trick. Many thanks! In fact, after unchecking Error Correction and successfully playing a CD all the way through, I even rechecked EC and immediately tried playing the same CD, with the same problematic "Track 2 Hanging" result.
Odd that this should be the solution, though. It begs the question as to whether or not EC should ever be checked. I realize that this feature is for importing and not for playing tracks, but it seems tedious to have to remember to check EC when importing and then uncheck it for playing. I guess I'm asking whether or not EC is effective enough to warrant the inconvenience of having to uncheck and recheck and uncheck, etc. Any thoughts on that?

Firefox 4b2 hangs after no more than 15 minutes

With no extensions enabled, FF4b2 hangs after a short while.
I don't really know how to get more information on this.
Another way to hang FF is to open the add-on manager and click "Update add-ons"
== This happened ==
Every time Firefox opened
== I upgraded to b2 from FF4b1 and tried to upgrade add-ons

Try a new Profile.
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

SAP BW 640-----SAINT HANGS AFTER CLICKING START

Hi Everybody,
We are on stack 9 on the source BW 640. I am trying to take the stack to 22 as a prerequirement for unicode conversion, and the upgrade to BI 7.0.
In this regard there is a dependency on PI_BASIS to be on 2005, and BI_CONT to be on 353. Currently we are on PI_BASIS 2004, and BI_CONT 352 on the source.
We have extracted the appropriate installation packages for the above components. When we run SAINT to install these components, and click START it just hangs. It does not take me to the next window.
At least SAINT used to take me to the next window after clicking start, but one change I did was to update the kernel to 221, saint was still hanging after clicking start, again updated the kernel to 274 which is the latest release for NW 2004. I also have the latest version of R3Trans, and tp. SAINT still hangs after clicking start button. No logs are getting generated in \usr\sap\trans\log. No files are getting generated in \usr\sap\trans\tmp.
I restored the database to what it was before we initiated the SAINT process. Still SAINT hangs after clicking start button.
In STMS-overviewu2014system-sap system-all the checks work fine(connection, transport directory, transport tool). Likewise in SAINT-utilities-check-transport tool----every thing looks good.
Why is SAINT hanging after clicking start button, can we downgrade the kernel to what it was before (level 155).
Any input is greatly appreciated.
Thank you.
Ramesh Srinivasan.

Thank you so very,very much. We are currently using a 640 gui. We tested with 710 gui and saint after clicking start does not hang.
So we are assuming that 710 gui will solve the problem.
Thanks once again. A very timely help. You bet I'll touch base with you if I run into issues.
RS

Apache Hangs after 1.0.2.1 upgrade

Similar Messages

Maybe you are looking for