Apache HTTP server has stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: httpd.exe
Application Version: 2.2.21.0
Application Timestamp: 4e6b3136
Fault Module Name: OraClient10.Dll
Fault Module Version: 10.2.0.1
Fault Module Timestamp: 43465d7a
Exception Code: c0000005
Exception Offset: 0012e9e9
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
How can I rectify this? Please do the needful.

MS is not the vendor of Apache, you;re at the wrong forum. Better try:
http://www.apachelounge.com/
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Similar Messages

Sync Server has stopped working

Hi,
I upgraded my iPhone to IOS 4.0.1 today. Since the upgrade, whenever I try to sync my iPhone I get an error message stating "Sync Server has stopped working". The sync continues, then I get another error message stating "iTunes could not back up the iPhone because an unknown error occurred (-20).
I am using iTunes 9 on Vista..
Any Suggestions folks?

Hi,
I upgraded my iPhone to IOS 4.0.1 today. Since the upgrade, whenever I try to sync my iPhone I get an error message stating "Sync Server has stopped working". The sync continues, then I get another error message stating "iTunes could not back up the iPhone because an unknown error occurred (-20).
I am using iTunes 9 on Vista..
Any Suggestions folks?

Safari - server has stopped working

I have tried the advice given to get safari to work but no joy. (deleting the app and restart. Also holding both home and sleep down to restart.) When I try to search I get "safari could not open this page because the server stopped working". How do I get it to work again and search??

Hi Friend,
Can your iPad sends iMessages, Facetime calls or something through the internet?
If yes, try to reset your network settings, double check the Restrictions settings, check the Safari settings...
If not, you have some problem with iinternet connection. Look at airplane mode is off, if your iPad recognizes WiFi connection or not, check the Restrictions settings, if other device also faces the same problem with internet connection
If still not working:
1. Go to the Settings App.
2. Tap on Wi-Fi
3. Your chosen network will be ticked. Tap on its white arrow over a blue circle button to its right
4. Tap on DNS
5. Replace the current information with 8.8.8.8,8.8.4.4
6. Try visiting a website with Safari to see if this works.
Hope something here helps

HT1338 My prefered out going mail server has stopped working?

When I try to send Emails From the cloud or Mac Mail I am instructed tochoose anothr outgoing mail server but none of the servers suggested work! HELP!

OS X Mail: Troubleshooting sending and receiving email messages

My ipad says safari could not open the page because the server has stopped working. how do i fix it?

it says on ipad safari can't connect the server is not responding.

Perhaps the server that sends the site you are trying to visit is in fact down. This happens sometimes.
Can you see that we page using a different device or computer?

Mail Server suddenly stopped working

My mail server has stopped working, and I can't figure out why. This is a brand new MacMini with the latest Maverics Server (preinstalled) that I just setup last month. (We migrated from an Xserve running 10.6.) Up to this point, mail has worked flawlessly.
This afternoon I used the Server app to create a new user. I then went about setting them up for ssh access and installing a public/private keypair (this is for a git repository). Around the same time, my mail server simply stopped working. As far as I know, no other configuration changes were made.
When I go into the Mail service in the Server app the status perpetually says "Starting...". The 'postfix status' command says that postfix is not running. I've checked every log and error file, and I can only find three anomolies:
The SMTP log file reports:
Feb 11 01:31:06 mail.gloaming.com postfix/postmap[7152]: warning: /Library/Server/Mail/Data/scanner/amavis/local_domains.db: duplicate entry: "mail.gloaming.com"
This warning has been logged before, several weeks earlier, so I assume it's not a serious problem.
The other warning is:
Feb 11 00:10:49 mail.gloaming.com postfix/postfix-script[23141]: warning: not owned by _postfix: /Library/Server/Mail/Data/mta/./guid_device_maps.plist
Other threads seem to indicate that this warning is benign.
The only other problem that looks really suspicious (to me) is in the system.log:
Feb 11 01:22:52 mail.gloaming.com ocspd[4947]: ERROR: unable to get the receiver data from the DB!
I'm not sure what that means, but it doesn't sound good.
Some threads point a finger at the virus and junk mail scanners. If I disable all mail filtering, the mail server status will finally change to "Serving mail at mail.gloaming.com". But it isn't. All attempts to get mail from the server are refused.
(Oh, and I've restarted the server several times.)
The postconf command tells me that the postfix system isn't accepting outside connections:
inet_interfaces = loopback-only
So it would appear that Server is setting this. Any attempt to change it back to "= all" fails, as the server software overwrites it with "= loopback-only" at its first possible opportunity. (Editing the main.cf file and reloading postfix doesn't fix it either.)
Here's the really strange part. The server just started do this today. I recovered a backup of the main.cf file from yesterday and diffed it with the one that's not working:
mail:postfix root# diff /Library/Server/Mail/Config/postfix/main.cf /Users/admin/Desktop/main.cf
675c675
< inet_interfaces = loopback-only
> inet_interfaces = all
682c682
< smtpd_helo_restrictions = reject_non_fqdn_helo_hostname reject_invalid_helo_hostname
> smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
692c692
< mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com
> mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com, $mydomain
712d711
< postscreen_dnsbl_sites = zen.spamhaus.org*2
As you can see, the Server software has deliberatly started setting inet_interfaces to loopback-only and I can't figure out how to get it to set it back to "all".
Some of the other threads have suggested "wipe and reinstall", but I've spent three weeks setting up this sever and shipping it to a co-location facility—starting over really isn't an option.
I'd really just want to know why the Server software is suddently configuring the mail server so it won't receive any mail!

The mystery continues.
This morning, I decided to take a fresh look at what's going on by recovering a backup copy of my entire /Library/Server/Mail/Config directory from last month. Looking at the item capture list, it shows that none of the files in my Mail/Config directory have changed since late last month.
Here are the disturbing changes.
In Server/Mail/Config/dovecot/dovecot.conf, there is one different line.
working:
     protocols = imap pop3 lmtp sieve
now:
     protocols = lmtp sieve
So clearly, the server doesn't think we should be running IMAP or POP. Which is probably the root of the problem.
In Server/Mail/Config/postfix/mail.cf, there are a number of minor/cosmetic differences, but the problematic ones appear to be
working:
     inet_interfaces = all
     mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com, $mydomain
now:
     inet_interfaces = loopback-only
     mydestination = $myhostname, localhost.$mydomain, localhost, mail.gloaming.com
Again, this configuration would imply that there are no public mail services.
Some other odd change occured in the Server/Mail/Config/postfix/main.cf file
working:
     smtpd     pass -       -       n       -       -       smtpd
     pickup    fifo n       -       n       60      1       pickup
          -o content_filter=smtp-amavis:[127.0.0.1]:10024
now:
     smtpd     pass -       -       n       -       -       smtpd
          -o receive_override_options=no_address_mappings
     pickup    fifo n       -       n       60      1       pickup
          -o content_filter=
Reading through some other posts, I also found another inexplicable change reported by other users having similar problems. The /System/Library/LaunchDaemons/org.postfix.master.plist suddenly changed.
working:
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
        <string>master</string>
        <string>-c</string>
        <string>/Library/Server/Mail/Config/postfix</string>
    </array>
now:
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
        <string>master</string>
        <string>-c</string>
        <string>/Library/Server/Mail/Config/postfix</string>
        <string>-e</string>
        <string>60</string>
    </array>
The postfix service is now "OnDemand" with a new, and myserious, "-e 60" option added. (I can find no documentation for an -e option in the postfix control tool.)
Ultimately, I "fixed" the problem by restoring the backup copy of my entire /Library/Server/Mail/Config folder, the /System/Library/LaunchDaemon/org.postfix.master.plist file, and immedately restarting the server. The mail servers started and everything appears to be normal.
But this whole experience has made me very learly of the Server app. Why did these configuration changes occur? What settings or circumstances caused them to spontaniously change to an, essentually, unusable state? I'm now afriad of making any changes via Server.app for fear it will decide I shouldn't have a working mail server again.
If anyone has any insights, I'd ver very interested in hearing them.
Message was edited by: James Bucanek

AdfAuthentication has stopped working

JDeveloper 11.1.1.2
Hi
For some unknown reason (at least to me) ADF authentication with the Jdeveloper integrated server has stopped working.
We have an application that uses form base authentication and the other day the authentication part stopped working.
Instead of getting the login.html as normal the application goes directly to the main page of the application using an anonymous user.
We have removed the ADF security configuration via the wizard and re-created the ADF security configuration via the same wizard but the problem persists.
We have checked the relevant files before and after and all seems to be correct.
We have created a new application with ADF security and it works as expected.
The only way we have found to get the authorization to work again is to add <url-pattern>/</url-pattern> to the web.xml adfAuthentication security constaring so we now have
<security-constraint>
        <web-resource-collection>
            <web-resource-name>adfAuthentication</web-resource-name>
            <url-pattern>/adfAuthentication</url-pattern>
            <url-pattern>/</url-pattern>
        </web-resource-collection>
        <auth-constraint>
            <role-name>valid-users</role-name>
        </auth-constraint>
    </security-constraint>
    <login-config>
        <auth-method>FORM</auth-method>
        <form-login-config>
            <form-login-page>/login.html</form-login-page>
            <form-error-page>/error.html</form-error-page>
        </form-login-config>
    </login-config>
    <security-role>
        <role-name>valid-users</role-name>
    </security-role>Has anybody got any ideas as to what's going on ?
Best Regards
Paul

Hi,
We have removed the ADF security configuration via the wizard and re-created the ADF security configuration via the same wizard but the problem persists.
This doesn't renew the configuration. Disabling the ADF Security activation just changes two flags in teh adf-config.xml file. So its not deleteing any context. You may want to check the policies. My assumption is that you have the test-all role active, which if assigned to objects may prevent you from having to autenticate
Frank

Active Sync for 800w has stopped working OTA

To anyone that can assist, my Active synch connection to my exchange server has stopped working OTA. It works fine over an USB connection and Wi-Fi, but when it's relying on the cell network it just constantly tries to connect. I am with Sprint, and use Vista. The active synch on the desktop works just fine. I even went back to my Baseline backup and it doesn't work. Thanks in advance.
Post relates to: Treo 800w (Sprint)

Are you able to otherwise access the internet from your phone? Also, does ActiveSync give any error messages? And, of course, have you tried at least a soft reset if not a hard reset?
Post relates to: Treo 800w (Sprint)

ICloud server has stopped responding

When I select contacts to sync with iCloud, I get the iCloud server has stopped responding.

I'm getting the same problem. iCloud wasn't working (which happens every couple weeks) so I uninstalled and then reinstalled it which always worked until now. Now during setup I ge the iCloud server has stopped working message. I have tried everything...rebooting, re-installing, etc. Nothing works

HOST APP SERVICE has stopped working

I keep getting the message "HOST APP SERVER has stopped working" whenever I try to select the home button on my screen. It simply says that Windows will close the application and notify me when a solution has been found, but this has been going
on for a week and it has yet to message me a solution. The error message isn't very specific as to what is going on and I have no idea what to do!

Hi kgabriella,
Please open Event Viewer and check the related logs, if possible, post the information here.
Further, follow the advice posted by Arnav Sharma, follow the guide to boot into clean boot and check the issue again.
Besides, see if the thread below would help:
Catalyst control centre host has stopped working.
Best regards
Michael Shao
TechNet Community Support

Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability

Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
This vulnerability has been fixed in release apache 2.2.20 and further corrected
in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
legacy 2.0.65 release,
Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?

For the following PSIRT:
http://www.cisco.com/en/US/products/csa/cisco-sa-20110830-apache.html
Download the following patch "lms40-win-Oct2011-su1-0.zip" :
http://www.cisco.com/cisco/software/release.html?mdfid=283434800&flowid=19062&softwareid=280775103&os=Windows&release=4.0&relind=AVAILABLE&rellifecycle=&reltype=latest
The instructions should be in the zip file how to install the patch.
This should cover all theses bugs that you can query in the bug tool kit:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
CSCte45565
CSCto12712
CSCto23584
CSCto23622
CSCto35544
CSCto35577
CSCtq48990

Adobe qt32 server cc 2014.0 has stopped working

Hi, when I exit Premiere Pro I get this popup a couple times (3 to 4 times at random times after I closed PP)
It slows down my entire system quite heavily.

hello ,thanks for jour mail ,but my English is very very bad sorry but
many thank for your feedback. Hav a nice Day
Am 09.12.2014 17:39, schrieb Rutgerverbist:
>
adobe qt32 server cc 2014.0 has stopped working
created by Rutgerverbist
<https://forums.adobe.com/people/Rutgerverbist> in /Premiere Pro/ -
View the full discussion
<https://forums.adobe.com/message/6999161#6999161>

Managed sql server installer has stopped working sql 2008 r2

I tried to installed sql 2008 r2 on my windows 7 but unfortunately I got message "managed sql server installer has stopped working"
1. I tried to program feature on and off feature
2. I checked setup file is corrupted or not setup file is well in condition
3. I turn on firewall too.
then again I tried to installed again same problem I faced.
please any different way to overcome from this problem!
regard Bishnu Khaling!

Hi Bishnu,
As Shanky’s post, you can post the SQL Server setup log files for analysis.
According to the error message, it is usually a problem with the installation of .NET Framework on the machine. However, from your description, you try to turn on the Microsoft .NET Framework 3.5 feature and still fail to install SQL Server 2008 R2.
Do you reboot your computer after enabling .NET Framework 3.5?
To further troubleshoot this issue, I recommend you perform the following steps.
1. Run the below tool to verify the state of one or more versions of the .NET Framework on the computer .
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
2. If .Net Frameworks 3.5 cannot be verified in step1, please use the
.NET Framework Repair Tool to repair it.
3. If there’s no problem with .Net Frameworks 3.5, and you also have .NET Framework 4.0 or 4.5 installed on the computer, please uninstall .NET Framework 4.0 or 4.5 completely. Then reinstall SQL Server and check if it is successful.
4. In addition, please make sure that the Windows 7 system is not damaged.
For more details about the error, you can also review the following blog.
Fix: Managed SQL Server installer has stopped working on Windows 7 | 8:
http://www.thewindowsclub.com/managed-sql-server-installer-has-stopped-working
Thanks,
Lydia Zhang

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

Apache HTTP server has stopped working

Similar Messages

Maybe you are looking for