Apache Requires Restart Every Day

I cannot get hls-vod streaming to work for more than 24 hours at a time. After a day or so, all videos stop working. But then I restart my apache service and everything is fine again. What could possibly cause this behavior?

It is hardware, not virii or spyware. Run Apple Hardware Test CD. Rule out anything that would find. Then run Memtest as it is often caused by bad RAM or memory.
Try running your system on a newly formatted disk with a fresh install and avoid questionable or unnecessary programs . Including AV.
Look at your USB and attached devices.
Repair your boot drive with Disk Warrior.

Similar Messages

Hub 3 needs to be restarted every day to restore s...

Hi
Every day, our Hub 3 needs restarting to restore our speed. It has been constantly 37+ MBPS for months. Recently, both wired LAN and wireless connections have slowed to 3Mbps.
Speeds checked on BT Wholesale Speedchecker, Lan and Wifi
All ususal checks completd
Used BT to check the following:
Line Checked = OK
Problems in our area = 0
Used Inssider to identify wireless channel 1 as clear from interference. Speeds still drop (Both Lan and Wifi)
Reset the Hub and Hey Presto, speedy Wifi and Lan for a few hours.
Wake up in the morning, same old story, slooow infinity.
Reset the Hub and Hey Presto, speedy Wifi and Lan.
Get home from work, slow again, and around in circles we go for another week.

Make a direct connection from your PC to the modem which will eliminate the homehub. Follow this guide to do that. Use your computer as normal for a while to see what speeds you get. If the speeds do not improve you will know it is probably a faulty hub. Obviously you can not use wireless devices or other wired connections when doing this.
Step 1: Remove the homehub from the modem
Step2: Connect your pc/laptop into the modem using LAN1 port
Step3: Open network and sharing centre on windows and click set up a new connection or network
Step4: Connect to the internet then click make a new connection Broadband PPPoE
Step5: Username [email protected] and the password as BT
Step6: connect, If it doesn't,keep pressing try again until it does.

Restart every day time capsule (DHCP)

My time capsule worked pefect until a few days ago. From now on I have to restart almost every day my "time Capsule". Because it lost the connection with my provider.
After the restart it works again perfectly for about 24:00 hr.
I thought it could be due to the IP. I have a DHCP connection. But the IP of the provider changes only every 06 months and on my capsule i still have the correct IP.
Aditional information I upgraded the firmware also a few day ago.
Is there some one who have the same problem?

My time capsule worked pefect until a few days ago. From now on I have to restart almost every day my "time Capsule". Because it lost the connection with my provider.
After the restart it works again perfectly for about 24:00 hr.
I thought it could be due to the IP. I have a DHCP connection. But the IP of the provider changes only every 06 months and on my capsule i still have the correct IP.
Aditional information I upgraded the firmware also a few day ago.
Is there some one who have the same problem?

My Mac restarts every day after a black screen

Hello,
Since 2-3 weeks I have a constant and extremely irritating bug.
Every day and at any time, I suddenly have a black screen, the keyboard light and the Mac restarts after few seconds. Sometimes it crashes twice a day.
To try to solve the problem, I reinstalled Mac OS Lion since partition "Recovery HD".
I checked the permissions, the system is updated, the software used as well. I also send the error report to Apple each time you restart, but there is still no visible return.
I'm getting more than upset.

You should be fine with a JSON backup.<br />
Note that restoring a JSON backup will replace all current bookmarks, so you can consider to create an HTML backup as well.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Bumblebeed requires restart every time to work properly

Hello all,
I am having an awkward issue with bumblebee. Often it refuses to run due to the following error (systemctl status bumblebeed):
bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled)
Active: active (running) since mer 2013-11-13 07:15:15 CET; 36min ago
Main PID: 409 (bumblebeed)
CGroup: /system.slice/bumblebeed.service
└─409 /usr/bin/bumblebeed
nov 13 07:15:15 StefaX systemd[1]: Started Bumblebee C Daemon.
nov 13 07:15:25 StefaX bumblebeed[409]: [ 29.610415] [INFO]/usr/bin/bumblebeed 3.2.1 started
nov 13 07:51:46 StefaX bumblebeed[409]: [ 2211.424704] [ERROR]Module nvidia could not be loaded (timeout?)
nov 13 07:51:47 StefaX bumblebeed[409]: [ 2211.424729] [ERROR]Could not load GPU driver
The odd thing is that if I restart bumblebee, it usually works perfectly. Then I exit the game and, if I start it again, bumblebeed fails again and I have to restart it again.
In dmesg I see:
[ 2198.880234] bbswitch: enabling discrete graphics
[ 2199.285757] pci 0000:01:00.0: power state changed by ACPI to D0
So apparently it does its stuff properly by turning the discrete card on... it just cannot load the driver for some reason.
This is the output of journalctl -u bumblebeed:
nov 13 07:15:15 StefaX systemd[1]: Starting Bumblebee C Daemon...
nov 13 07:15:15 StefaX systemd[1]: Started Bumblebee C Daemon.
nov 13 07:15:25 StefaX bumblebeed[409]: [ 29.610415] [INFO]/usr/bin/bumblebeed 3.2.1 started
nov 13 07:51:46 StefaX bumblebeed[409]: [ 2211.424704] [ERROR]Module nvidia could not be loaded (timeout?)
nov 13 07:51:47 StefaX bumblebeed[409]: [ 2211.424729] [ERROR]Could not load GPU driver
This is a full journalctl -u bumblebeed for a whole fail/restart/success:
nov 13 07:15:15 StefaX systemd[1]: Starting Bumblebee C Daemon...
nov 13 07:15:15 StefaX systemd[1]: Started Bumblebee C Daemon.
nov 13 07:15:25 StefaX bumblebeed[409]: [ 29.610415] [INFO]/usr/bin/bumblebeed 3.2.1 started
nov 13 07:51:46 StefaX bumblebeed[409]: [ 2211.424704] [ERROR]Module nvidia could not be loaded (timeout?)
nov 13 07:51:47 StefaX bumblebeed[409]: [ 2211.424729] [ERROR]Could not load GPU driver
nov 13 08:05:48 StefaX systemd[1]: Stopping Bumblebee C Daemon...
nov 13 08:05:48 StefaX systemd[1]: Starting Bumblebee C Daemon...
nov 13 08:05:48 StefaX systemd[1]: Started Bumblebee C Daemon.
nov 13 08:05:48 StefaX bumblebeed[4583]: [ 3053.423483] [INFO]/usr/bin/bumblebeed 3.2.1 started
nov 13 08:06:06 StefaX bumblebeed[4583]: [ 3071.310120] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
nov 13 08:06:06 StefaX bumblebeed[4583]: [ 3071.310137] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
nov 13 08:06:19 StefaX bumblebeed[4583]: [ 3083.649794] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
I tried with nouveau but I am not that happy with the 3D quality it provides overall. This is an excerpt from journalctl _TRANSPORT=kernel:
nov 13 07:51:36 StefaX kernel: bbswitch: enabling discrete graphics
nov 13 07:51:38 StefaX kernel: pci 0000:01:00.0: power state changed by ACPI to D0
nov 13 08:05:48 StefaX kernel: bbswitch: disabling discrete graphics
nov 13 08:05:48 StefaX kernel: ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
nov 13 08:05:48 StefaX kernel: pci 0000:01:00.0: power state changed by ACPI to D3cold
nov 13 08:06:02 StefaX kernel: bbswitch: enabling discrete graphics
nov 13 08:06:03 StefaX kernel: pci 0000:01:00.0: power state changed by ACPI to D0
nov 13 08:06:03 StefaX kernel: nvidia: module license 'NVIDIA' taints kernel.
nov 13 08:06:03 StefaX kernel: Disabling lock debugging due to kernel taint
nov 13 08:06:03 StefaX kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
nov 13 08:06:03 StefaX kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
nov 13 08:06:03 StefaX kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
nov 13 08:06:04 StefaX kernel: nvidia 0000:01:00.0: irq 59 for MSI/MSI-X
It looks like that it does not even TRY to load the module when it fails, but I could be wrong I have no clue on where to look for further information.
I am using kernel 3.11.6-1-ARCH with official nvidia driver on an Asus X53S (there are two, I have the one with i7) with NVidia 610M.
Anybody has a hint?
Thanks in advance!
Stefano

OK--then you likely have a different graphics chip. But you could still have an intermittently malfunctioning graphics chip.
Have you tried running the extended version of the Apple Hardware test?
Do you get the same graphics artifact on an external display? If so, it would tend to imply a graphics chip problem. If you have good video on an external display, the problem is more likely to be with the internal display or its connections.
And if Apple's repair did not resolve the issue, you may have some recourse with them, depending on how long ago you had the repair done and how long their warranty is on it.
Even though this sounds like a hardware problem to me, it may also be worth reinstalling the OS, just to eliminate the possibility of a software cause.
Good luck!

Express Needs to be restart every day

Our Express needs to be reset at least once a day. The green light is on and we can see the SSID but when we use our mac (or any other device) to connect to it, we get connection failed errors. Any idea what can be done to fix this?

If both devices are producing a wireless network, there is an increased chance of wireless interference between them, especiallyi if they are located in the same room. If you normally only one use one wireless network, it would make sense to turn the other one off.

Restart message comes up every day

Lately, after sitting idle for a while, my desktop G4 (OS 10.4.3) has started to display a message saying that the computer needs to be restarted. Any thoughts on why this is happening every day?
Thanks.
Russ Fega
Desktop G4 Mac OS X (10.4.3)

Hi, Russ.
If you are seeing this message, that indicates a kernel panic.
If so, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

My iPhone 4 appears with no service every day, i have to restarted and a few hours later again the same problem, Any other solution please???

my iPhone 4 appears with no service every day, i have to make restart and a few hours later again the same problem, Any other solution please???

This is almost always a symptom of a phone that was jailbroken or hacked to unlock it.
Where did you get the phone?

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

Database auto restart at 2:00 AM every day

Hi,
I've installed 10.2.0.2.0 database in Windows 2000 Server.
Now it restarts automatically at 2:00 AM every day.
I've checked OS, there is no JOB run at 2:00 AM, and event viewer look normal at 2:00 AM.
When it restarts, sometimes it would restart successfully, sometimes it wouldn't(mounted, not open).
Here is the alert log.
Thu Jan 31 15:23:37 2008
Thread 1 advanced to log sequence 115
Current log# 5 seq# 115 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\REDO05.LOG
Thu Jan 31 22:00:21 2008
Thread 1 advanced to log sequence 116
Current log# 6 seq# 116 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\REDO06.LOG
Fri Feb 01 00:50:52 2008
Thread 1 advanced to log sequence 117
Current log# 3 seq# 117 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\REDO03.LOG
Fri Feb 01 02:00:16 2008
Starting background process EMN0
EMN0 started with pid=32, OS id=5848
Fri Feb 01 02:00:16 2008
Shutting down instance: further logons disabled
Fri Feb 01 02:00:17 2008
Stopping background process QMNC
Fri Feb 01 02:00:18 2008
Stopping background process CJQ0
Fri Feb 01 02:00:19 2008
Stopping background process MMNL
Fri Feb 01 02:00:20 2008
Stopping background process MMON
Fri Feb 01 02:00:21 2008
Shutting down instance (immediate)
License high water mark = 17
Fri Feb 01 02:00:21 2008
Stopping Job queue slave processes
Fri Feb 01 02:00:22 2008
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Fri Feb 01 02:00:31 2008
ALTER DATABASE CLOSE NORMAL
Fri Feb 01 02:00:31 2008
SMON: disabling tx recovery
SMON: disabling cache recovery
Fri Feb 01 02:00:32 2008
Shutting down archive processes
Archiving is disabled
Fri Feb 01 02:00:52 2008
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC0: Archiving disabled
Fri Feb 01 02:00:52 2008
ARCH shutting down
ARC0: Archival stopped
Fri Feb 01 02:00:53 2008
ARC2: Becoming the 'no FAL' ARCH
Fri Feb 01 02:00:53 2008
ARC2: Becoming the 'no SRL' ARCH
ARC2: Archiving disabled
ARCH shutting down
ARC2: Archival stopped
Fri Feb 01 02:00:54 2008
ARC3: Becoming the 'no FAL' ARCH
ARC3: Becoming the 'no SRL' ARCH
ARC3: Archiving disabled
Fri Feb 01 02:00:54 2008
ARCH shutting down
ARC3: Archival stopped
Fri Feb 01 02:00:55 2008
ARC1: Becoming the heartbeat ARCH
Fri Feb 01 02:00:55 2008
ARC1: Archiving disabled
ARCH shutting down
ARC1: Archival stopped
Fri Feb 01 02:00:57 2008
Thread 1 closed at log sequence 117
Successful close of redo thread 1
Fri Feb 01 02:00:57 2008
Completed: ALTER DATABASE CLOSE NORMAL
Fri Feb 01 02:00:57 2008
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Feb 01 02:01:00 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 197132288
shared_pool_size = 0
__large_pool_size = 4194304
large_pool_size = 0
__java_pool_size = 4194304
java_pool_size = 0
__streams_pool_size = 0
streams_pool_size = 0
spfile = C:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILEMALECARE.ORA
sga_target = 805306368
control_files = C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\CONTROL01.CTL, C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\CONTROL02.CTL, C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 591396864
db_cache_size = 0
compatible = 10.2.0.1.0
log_archive_max_processes= 4
db_file_multiblock_read_count= 16
db_recovery_file_dest = C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 21474836480
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=malecareXDB)
job_queue_processes = 10
audit_file_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\ADUMP
background_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\BDUMP
user_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\UDUMP
core_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\CDUMP
db_name = malecare
open_cursors = 300
pga_aggregate_target = 203423744
PMON started with pid=2, OS id=2112
PSP0 started with pid=3, OS id=3524
MMAN started with pid=4, OS id=3528
DBW0 started with pid=5, OS id=6008
LGWR started with pid=6, OS id=3544
CKPT started with pid=7, OS id=3516
SMON started with pid=8, OS id=3508
RECO started with pid=9, OS id=3504
CJQ0 started with pid=10, OS id=3824
MMON started with pid=11, OS id=3820
MMNL started with pid=12, OS id=676
Fri Feb 01 02:01:00 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Fri Feb 01 02:01:00 2008
ALTER DATABASE MOUNT
Fri Feb 01 02:01:04 2008
Setting recovery target incarnation to 2
Fri Feb 01 02:01:04 2008
Successful mount of redo thread 1, with mount id 3434381212
Fri Feb 01 02:01:04 2008
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Feb 01 02:16:04 2008
db_recovery_file_dest_size of 20480 MB is 15.35% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.

Hi,
We have a RMAN every 2:00 PM.
Here is the log.
Recovery Manager: Release 10.2.0.2.0 - Production on Thu Jan 31 14:00:00 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: MALECARE (DBID=3432372830)
connected to recovery catalog database
RMAN> CROSSCHECK ARCHIVELOG ALL;
2> DELETE NOPROMPT ARCHIVELOG UNTIL TIME 'SYSDATE-7';
3> exit
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=141 devtype=DISK
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_77_3SGWO1JH_.ARC recid=50 stamp=644806820
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_78_3SHKS76X_.ARC recid=51 stamp=644828457
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_79_3SJYJ0M1_.ARC recid=52 stamp=644874242
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_80_3SKK0N8R_.ARC recid=53 stamp=644893207
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_81_3SKYJGFL_.ARC recid=54 stamp=644907024
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_82_3SM2RD0G_.ARC recid=55 stamp=644944142
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_83_3SMTVZDW_.ARC recid=56 stamp=644968834
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_26\O1_MF_1_84_3SN5DXH1_.ARC recid=57 stamp=644979617
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_26\O1_MF_1_85_3SNY0W44_.ARC recid=58 stamp=645004830
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_26\O1_MF_1_86_3SPCRCFB_.ARC recid=59 stamp=645051661
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_27\O1_MF_1_87_3SPSS7JO_.ARC recid=60 stamp=645066026
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_27\O1_MF_1_88_3SQVFHY8_.ARC recid=61 stamp=645100466
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_27\O1_MF_1_89_3SRCDP11_.ARC recid=62 stamp=645116824
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_90_3SSG4YLD_.ARC recid=63 stamp=645152418
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_91_3SSZS0LF_.ARC recid=64 stamp=645170467
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_92_3SV84W2B_.ARC recid=65 stamp=645211806
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_93_3SVR09FF_.ARC recid=66 stamp=645228044
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_29\O1_MF_1_94_3SW2K0XN_.ARC recid=67 stamp=645238820
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_29\O1_MF_1_95_3SYDCGXP_.ARC recid=68 stamp=645314417
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_30\O1_MF_1_96_3SYPWVL8_.ARC recid=69 stamp=645325214
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_30\O1_MF_1_97_3T10Q554_.ARC recid=70 stamp=645400807
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_31\O1_MF_1_98_3T1C8TO9_.ARC recid=71 stamp=645411613
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_31\O1_MF_1_99_3T2D3M5V_.ARC recid=72 stamp=645445238
Crosschecked 23 objects
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=141 devtype=DISK
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_77_3SGWO1JH_.ARC recid=50 stamp=644806820
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_78_3SHKS76X_.ARC recid=51 stamp=644828457
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_79_3SJYJ0M1_.ARC recid=52 stamp=644874242
Deleted 3 objects
Recovery Manager complete.
select to_char(LAST_DATE,'yyyy-mm-dd hh24:mi:ss'),
to_char(NEXT_DATE,'yyyy-mm-dd hh24:mi:ss'),interval
from dba_jobs
TO_CHAR(LAST_DATE,'YYYY-MM-DDHH24:MI:SS') TO_CHAR(NEXT_DATE,'YYYY-MM-DDHH24:MI:SS') INTERVAL
2008-02-01 12:14:54 2008-02-01 12:19:54 SYSDATE + 5/1440
2008-02-01 12:18:54 2008-02-01 12:19:54 sysdate + 1 / (24 * 60)
2008-02-01 12:09:49 2008-02-01 13:09:49 SYSDATE + 1/24
2008-02-01 12:09:49 2008-02-01 13:09:49 SYSDATE + 1/24
2008-01-27 12:00:01 2008-02-03 12:00:00 TRUNC(NEXT_DAY(SYSDATE, 1))+12/24
2008-02-01 01:00:02 2008-02-02 01:00:00 TRUNC(SYSDATE+1)+1/24

HomeHub 5 Rebooting/Restarting Every 15 Days!!

Hi All,
Apologies if this has already been covered but I am at my whits end. I have had Inifinty 2 for over a year now and my HH5 seems to restart every 15 days as if its on a timer.. I recently had an engineer out as my line went iffy as my max speed reduced by about 20mb and the max available was showing incorrectly too. He put my line on to some new pairs up to the cabinet... The speeds are fantastic as they aleady were and my line was back up running in no time.. Sure enough though.... 15 days exactly later and the hub restarted itself albeit the speeds stayed the same... What on earth doe the HH5 do this for or is there something wrong with my line?? I would love to get to the bottom of this as surely these restarts will affect my speed.
Info from the router:
Whilst typing this i notice that my hub restarted itself again last night to apply the firmware update.. ending 204... perhaps this might mean the end of the restarts
Any advice gratefully accepted
00:39:50, 16 Jan.
(49636.050000) The system is going DOWN for reboot.
10:53:08, 15 Jan.
( 33.870000) The system is UP!
10:52:00, 15 Jan.
(1886357.070000) The system is going DOWN for reboot.
10:52:00, 15 Jan.
(1886357.070000) OpenRG is going for reboot by IPC command
10:51:55, 15 Jan.
(1886352.070000) OpenRG will go down for reboot in 5 seconds
14:52:33, 24 Dec.
( 35.030000) The system is UP!
15:34:44, 23 Dec.
( 34.400000) The system is UP!
15:01:27, 23 Dec.
( 34.310000) The system is UP!
00:00:35, 01 Jan.
( 35.690000) The system is UP!
17:48:04, 13 Dec.
( 36.600000) The system is UP!
17:46:54, 13 Dec.
(726182.170000) The system is going DOWN for reboot.
08:04:09, 05 Dec.
( 35.500000) The system is UP!
00:05:02, 24 Nov.
( 34.800000) The system is UP!
00:03:52, 24 Nov.
(1554635.200000) The system is going DOWN for reboot.
00:03:52, 24 Nov.
(1554635.200000) OpenRG is going for reboot by IPC command
00:03:47, 24 Nov.
(1554630.200000) OpenRG will go down for reboot in 5 seconds
00:13:16, 06 Nov.
( 35.380000) The system is UP!
00:12:07, 06 Nov.
(1252254.320000) The system is going DOWN for reboot.
00:12:07, 06 Nov.
(1252254.320000) OpenRG is going for reboot by IPC command
00:12:02, 06 Nov.
(1252249.320000) OpenRG will go down for reboot in 5 seconds
13:21:17, 22 Oct.
( 35.160000) The system is UP!
13:20:17, 22 Oct.
(764067.760000) The system is going DOWN for reboot.
Stats on Line
1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ34526038
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 09:38:29
6. Data rate:
20000 / 79995
7. Maximum data rate:
30944 / 83647
8. Noise margin:
12.8 / 7.8
9. Line attenuation:
13.7 / 14.9
10. Signal attenuation:
13.6 / 14.9
Solved!
Go to Solution.

Another poster {DavidCo} recommend to set the dhcp lease the max 21 day setting on the hh5 to see if that helps.
15 days is pretty good for the hh5 & shouldn't really attract the dreaded dlm's attention. {Unless its on a counter phase ?}
Good guide on how the dlm works from BTRetails sister isp pluesnet . http://community.plus.net/library/browsing/fttc-dlm-what-it-is-how-it-works/
If you don't want to loss the lines connection when the hh5 updates ( or what ever other mischief it gets upto ) You need to use it in tandem the an openreach modem as "guru ray_d" often highlights .
That way the hh5 can concentrate on just being a router , rather than an all singing 'n' dancing all-in-one.

My macbook pro says Shockwave Flash plug-in has crashed pretty much every day. I have to shut the computer down and restart it. Is there anything I can do to stop this from happening?

My macbook pro says Shockwave Flash plug-in has crashed pretty much every day. I have to shut the computer down and restart to fix it. Is there any way I can keep this from happening?

Download the latest version from here ONLY:
http://get.adobe.com/flashplayer/
also, make certain your Mac OS X software is completely up-to-date. There is a Trojan Horse that pretended to be a Flash update, and installed Flash with malware included. The latest security updates removes the malware and all older versions.

I have to restart iTunes every day to access my home sharing on my Apple tv

I have to restart iTunes every day to access my home sharing on my Apple tv, Apple had me turn off the firewall on my computer that did not help This happens on all my 4 Apple TV's only 2 are wireless but it mainly happens on my wired Apple TV's. the rest of my network works fine

Exact same problem since a long time. Started after an ITune upgrade 6 months ago if I remember correctly.
Im using Home Sharing. I have IPad,IPhone and 2 Apple TV one 2nd (Wifi) and one 3rd gen. Wifi provided by Apple Express. Home sharing work great on all device without interupting playback and/or disconnecting until I leave iTune server hosting Home Sharing idle for something like 2 hours. I have tried many time to access Home Sharing from any of my Apple device before that said 2 hours idle and it connected properly. Like you, it mostly happen overnight while iTune is idle for a long period. When it happen, all devices stop detecting ITune Home Sharing. Remote Apps and/or Music Home Sharing can't connect. Doing of one of the points down below temporarly fix problem on all devise and they connect right away until everything is idle again.
1) Turning OFF then ON Home sharing temporarely fix the problem (Until next idle).
2) Closing Itune also temporarely fix the problem.
Since long time (Before this problem started) I have ITune installed in a VMware virtual machine running Windows XP SP3 32bit on top of an VMware ESXi 5.0 host. First I though it was more of my unusual setup causing the problem. I have tried a lot of things. Scratch reinstall, removing firewall, removing all kind of power features on host and OS it self.No anti-virus, no other software installed. Running out of idea. Now glad to see some else have the exact same problem.
Will keep looking and post if I find anything.
What is your setup hosting iTune ? PC, Mac + version ?

I have to restart my computer at least once every day in order to get my podcast to update? I thought the new version would fix this but it's just getting worse. Please help.

I have to restart my computer at least once every day in order to get my podcast to update? I thought the new version would fix this but it's just getting worse. Please help

Did you check the Processes tab in the Task Manager?
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Photoshop requires sign in every day

This is my third day using PSCC 64 bit and literally every day at some point in launching PS it askes me to log in. Again and again, is this normal behaivor for CC, does it require daily log in? I have read that CC only goes online to check every month.
I also have to resign and agree to the license agreement, every time....

I'm having the same problem. It's extremely aggravating.

Apache Requires Restart Every Day

Similar Messages

Maybe you are looking for