Apache reverse proxy and URL Iview
Hi everybody,
I'm trying to configure apache as reverse proxy to access my portal from extranet.
The first problem I have is that I have to access a URL Iview that connect another internal application.
ProxyPass /irj http://internaPortall/irj
ProxyPassReverse /irj https://externalPortal/irj
ProxyPass /irj http://internalApp/myApp
ProxyPassReverse /irj https://externalApp/myApp
In my portal the urlIview maps externalApp/myApp
No problem to access my portal from extranet but I cannot get myApp.....
Another point:
I have configured SSL but if I try to connect
https://externalPortal:8443/irj/
apache redirects me to
http://externalPortal/irj/
Thanks a lot
Massimiliano
Hi,
We are in a similiar situation. Can you please share the solution.
Thanks...
Vinay
Similar Messages
-
Apache reverse proxy and SSL termination
Hi Guru's
Can anyone tell me, how to do SSL termination at apache reverse proxy. I am using apache reverse proxy for accesing portal from internet. Apache is configured for SSL and portal is NON SSL.
I am using header variable login module in portal. i wanted to terminate SSL at apache reverse proxy and then all traffic after that should be clear text.
should i maitain any property. is there any documentation for it.
Please help me
TomThe majority of the work here is around configuring your Web Dispatcher and Apache Reverse proxy. The work on the portal is straight forward enabling of SSL.
You can follow http://help.sap.com/saphelp_nw2004s/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm for setting this up.
what level I need to configure SSL and how do I proceed in both scenarios?
Your question itself says where you need SSL. SSL is required where ever you need HTTPS communication.
how do I proceed in both scenarios?
From a portal perspective, the configuration should remain the same.
Do I have to install SSL at portal, web dispatcher or at Apache level?
SSL needs to be configured at all the 3 levels if you are looking at end to end SSL implementation.
See the following for possible SSL implementation options:
http://help.sap.com/saphelp_nw04/helpdata/en/d8/a922d7f45f11d5996e00508b5d5211/frameset.htm
https://cw.sdn.sap.com/cw/docs/DOC-115509
Will SSL termination work for scenario 2?
Yes this should work - see http://help.sap.com/saphelp_nw2004s/helpdata/en/36/fd39eacf4cde4a8fe32d7f29b3db16/frameset.htm
However in case of SSL Termination, the request to your portal from the web dispatcher will be sent as HTTP.
I would recommend you to take a step by step (backward approach).
First, enable SSL on your portal and make sure it works - going directly to the server.
Then, you can introduce the Web Dispatcher - and test if every thing works going through the web dispatcher.
Finally - you can test the end to end flow - with your Reverse proxy involved.
- Shanti -
Apache Reverse Proxy and Branding Image
Hi,
I just installed a Apache reverse proxy on solaris. Unfortunatly, the branding image on the EP logon screen is not displayed. Anyone who knows how I can fix that?
I read some good post for the IIS reverse proxy. Is there a way to do the same on Apache?
Thanks
ElvezThanks for the replies.
However, I found the solutioin in an excellent document on the Web: http://www.apacheweek.com/features/reverseproxies. It would be worth reading for SAP. I'm especially referring to the document "Apache Configuration for J2EE Web Applications". The configuration described in the SAP document is strongly avoided by the author of apacheweek.
Best regards,
Elvez -
Apache Reverse Proxy and Adobe Connect
Hi all,
I need to expose Adobe Connect to internet. Our client uses it with SAP's Learning Solution. I achieved to expose main page but I couldnt expose Rooms. When I click Room link (http://adobe.mydomain.com/dene/?launcher=false) it opens but room not loading.
Any idea with this?Ok I gave up Apache. Now the Adobe Connect Server is in DMZ! But still no rooms open!
-
IIS Reverse Proxy with URL rewrite.
Hi all, hoping to leverage the wealth of knowledge contained here.
Any assistance would be very welcome.
I'm having an issue getting a reverse proxy and URL rewrite working in IIS 7.0.
I need to redirect all requests with a specific virtual directory suffix only.
ie; https://domain.test.com/outbound/Content/query_etc
With /Outbound/ being the trigger.
This should be redirected to http://10.10.10.10/inbound/Content/query_etc
While at the same time, requests without the /outbound/ suffix should be handled locally.
I have configured the reverse proxy as described in a few articles, and have had no luck.
Here's a snippet from my (sanitized) web.config at the site level.
<rewrite>
<outboundRules>
<rule name="ReverseProxyOutboundRule1" preCondition="ResponseIsHtml1">
<match filterByTags="A" pattern="^http(s)?://10.10.10.10/inbound/(.*)" />
<action type="Rewrite" value="https://domain.test.com/outbound/{R:2}" />
</rule>
<preConditions>
<preCondition name="ResponseIsHtml1">
<add input="{RESPONSE_CONTENT_TYPE}" pattern="^text/html" />
</preCondition>
</preConditions>
</outboundRules>
<rules>
<rule name="ReverseProxyInboundRule1" stopProcessing="true">
<match url="^outbound/(.*)" />
<action type="Rewrite" url="http://10.10.10.10/inbound/{R:1}" appendQueryString="true" logRewrittenUrl="false" />
</rule>
</rules>
</rewrite>
To me, this looks correct, yet it doesn't work.
With this, I get the normal 404 - Error Code 0x80070002, with the text indicating the local directory doesn't exist, so.... not being picked up by the filter for redirection.Hi Andrew,
Looking at your requirements it appears you need Reverse Proxy To Another Site/Server.
By using URL Rewrite Module together with
Application Request Routing module you can have IIS 7 act as a
reverse proxy.
It seems like URL Rewrite can't re-route the request somewhere else out of the server.
Even when you rewrite the url the actual connection remains with the server. Hence if your original server doesn't have /inbound/Content/query_etc it will fail with 404.
Hosting multiple domain names under a single account using URL Rewrite.
It’s a common desire to have a single IIS website that handles multiple sites with different domain names.
References:
How to create a url alias using IIS URL Rewrite:
http://blogs.technet.com/b/mspfe/archive/2013/11/27/how-to-create-a-url-alias-using-iis-url-rewrite.aspx
Reverse Proxy with URL Rewrite v2 and Application Request Routing:
http://www.iis.net/learn/extensions/url-rewrite-module/reverse-proxy-with-url-rewrite-v2-and-application-request-routing
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
Configuring a Apache Reverse Proxy for OracleAS Portal and OracleAS Single
I'm trying to implement my Oracle Portal 10g Release 2 with a reverse proxy (Apache 2.2) as described in this link: http://download.oracle.com/docs/cd/B14099_19/core.1012/b13998/variants.htm#BEIFECEH without success. I have Oracle Portal, Oracle SSO,OID in the same domain and Apache Reverse Proxy in another domain. Has anyone had success using OracleAS Portal with a reverse proxy?
First of all i'm trying to configure a reverse proxy only for Ora SSO (infra tier). Here is what i already do:
APACHE REVERSE PROXY (Apache 2.2)
http:/proxy.mycompany.com:80
ProxyRequests off
ProxyPassInterpolateEnv On
ProxyPass / http:/portal.tech.everett.it:7777/
ProxyPassReverse / http:/portal.tech.everett.it:7777/
ProxyPreserveHost On
ORACLE SSO
http:/portal.mycompany.com:7777
Here are the steps i already do:
1- CONFIG OID
create an ldif file called setdasurl.ldif and insert as follow:
dn:cn=OperationURLs,cn=DAS,cn=Products,cn=OracleContext
changetype: modify
replace: orcldasurlbase
orcldasurlbase: http:/proxy.mycompany.com/
then do ldapmodify as follow:
ldapmodify -x -h portal.mycompany.com -p 3060 -D "cn=orcladmin" -w password1 -v -f setdasurl.ldif
2- CONFIG ORA SSO (as gentjan user)
export ORACLE_HOME=/home/gentjan/product/10.1.2/OracleAS/infra/
2.1-config Apache config of ORA SSO
vi $ORACLE_HOME/Apache/Apache/conf/httpd.conf
change from:
ServerName portal.mycompany.com
Port 7777
KeepAlive On
to:
ServerName proxy.mycompany.com
Port 80
KeepAlive Off
and add at the end of httpd.conf
RewriteEngine On
RewriteOptions inherit
2.2- update DCM Repository (as root)
*$ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct HTTP_Server -v -d*
2.3- modify SSO Server Home URL to reverse proxy hostname and port (as root)
*$ORACLE_HOME/sso/bin/ssocfg.sh http proxy.mycompany.com 80*
2.4- Updating the targets.xml File
Open the ORACLE_HOME/sysman/emd/targets.xml file and locate the target type oracle_sso_server.
vi $ORACLE_HOME/sysman/emd/targets.xml
Update the HTTPMachine and HTTPPort attributes with the proxy server host and port attributes that were passed to ssocfg. For example:
Property NAME="HTTPMachine" VALUE="proxy.mycompany.com"
Property NAME="HTTPPort" VALUE="80"
Property NAME="HTTPProtocol" VALUE="http"
Save and close the file.
Reload the Application Server Control Console by issuing this command (as gentjan):
*$ORACLE_HOME/bin/emctl reload*
2.5- Re-register mod_osso on SSO Middle-tier with reverse proxy hostname and port
some needed permissions
chmod -R 775 /home/gentjan/product/10.1.2/OracleAS/infra/dcm/
Re-register mod_osso (as gentjan)
*$ORACLE_HOME/sso/bin/ssoreg.sh -oracle_home_path /home/gentjan/product/10.1.2/OracleAS/infra -site_name infra.proxy.mycompany.com -config_mod_osso TRUE -mod_osso_url http:/proxy.mycompany.com:80 -update_mode MODIFY*
2.6- update DCM Repository (as root)
*$ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct HTTP_Server -v -d*
2.7- Restart OC4J_Security and Oracle HTTP Server at Infrastructure tier
*$ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server*
*$ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY*
After this modifications my reverse proxy is ok.
I can access to http:/proxy.mycompany.com:80 and this redirect me to Oracle Application Server Welcome page.
If i try http:/proxy.mycompany.com/pls/orasso/orasso.home, i can view the SSO Server Home page.
The problem that i find is when i click to Login page for Oracle SSO.
I have the following error:
Forbidden You don't have permission to access /pls/orasso/ORASSO.wwsec_app_priv.login on this server.
So, in other words i can't do the login/logout under reverse proxy. Anyone can help?
Gentjan -
IC WebClient - Apache Reverse Proxy
Hi,
We are working on CRM 5.0. I have configured the apache reverse proxy to work with EP7.0. All the iviews from the portal are working fine except the IC webclient. When the user clicks on the IC Webclient tab, it displays a blank window as 'Loading' and doesn't do anything. At the left bottom of the screen, i do see a javascript error. Double click on the error opens a window with the error description as 'Invalid argument' and the url is
http://crq.vm.com/sap(bD1lbiZjPTAxMCZkPW1pbiZpPTEmcz1TSUQlM2FBTk9OJTNhc2FwY3JxMDBfQ1JRXzAwJTNhdlEtSDRHeFU1R0d6WGtUZ0daTjE3cmtrWTZqSjVFUEZRSWljWWc4cS1BVFQ=)/bc/bsp/sap/ic_base/default.htm?sap-tray-type=PLAIN&sap-tray-padding=X&sap_ep_version=7%2e00%2e200707191011&sap_ep_baseurl=http%3a%2f%2fepq%2evm%2ecom%3a80%2firj%2fportal
Please let me know if anyone knows how to resolve this issue.
Thanks,
VSingh!!Did you resolve this issue? There is this note.
Note 651435 - Cannot run applets on Sun JVM 1.4.x with proxy server -
Hi
I have installed Apache Reverse Proxy to access my Portal and ECC6.
In the httpd config file , i have done the following settings.
<VirtualHost ipaddress:port>
ProxyPreserveHost On
ProxyPass /irj/ http://portalserver:50000/irj/
ProxyPassReverse /irj/ http://portalserver:50000/irj/
ProxyPass /eccdev/ http://eccserver:8000/eccdev/
ProxyPassReverse /eccdev/ http://eccserver:8000/eccdev/
</VirtualHost>
eccdev is external alias for the path
/sap/bc/gui/sap/its/webgui/
With this setting when i when a request is made for eccdev/
it takes me to the ecc6 login page.
when i enter the required information , it just clears the username password fields.
i checked that the username password are correctly entered.
what is the problem ?
Regards
RajendraHi Darren ,
Thanks for the reply.
Our SSO between Portal and ECC6 works fine without Reverse Proxy.
If we access the Portal Through Reverse Proxy , when we navigate to any iViews say BSP iView , it asks for Username password. Once provided it works fine.
Second Scenario is Using Reverse Proxy to Directly access
SAP GUI . i.e without using Portal.
If i do not use Reverse Proxy , i can access my ECC6 webgui
through browser after providing the Login Details, but if i use Reverse Proxy then Even after providing the Login Details ,
the LogOn Box does not go and keeps asking for login details.
To summarize , i just want to acess the SAP GUI from Browser
using Reverse Proxy . I am able to do it without reverse Proxy .
Can you help ? -
Apache reverse proxy setting for access to Backend
Hi experts,
we have set up apache reverse proxy to make available our NW portal (and SRM functions)over the internet.
Our settings look something like this:
ProxyRequests Off
<VirtualHost *:80>
ServerName myportal.portalhosto.com
ProxyPreserveHost On
ProxyPass /irj/ http://myportal.portalhost.com:53200/irj/
ProxyPass /webdynpro/ http://myportal.postalhost.com:53200/webdynpro/
ProxyPassReverse /irj/ http://myportal.portalhost.com:53200/irj/
ProxyPassReverse /webdynpro/ http://myportal.portalhost.com:53200/webdynpro/
ErrorLog logs/myportal.portalhost.com-error.log
CustomLog logs/myportal.portalhost.com-custom.log combined
RewriteEngine On
RewriteRule ^/sap/(.*)$ http://mybackend.backendhost.com:8020/sap/$1 [P,NC]
</VirtualHost>
Problem:
when we access the portal from the internal network(either by using the internal URL or external URL) things work fine.
But we access the portal from internet, we are able to login to the portal and acess all webdynpro Java related applications.But when we try to acess the BSP/WD abap application running on a backend SRM system, we get 'host not found' message with the INTERNAL url of the SRM backend application displayed.
Do we need to expose the SRM backend to the outside world via reverse proxy as well?If yes,how?Do we need to change the system definitions in portal for that?
Any help in resolving this would be greatly appreciated.
regards,
KiranHi,
Do we need to expose the SRM backend to the outside world via reverse proxy as well?If yes,how?Do we need to change the system definitions in portal for that?
Yes , you have to expose your backend system using reverse proxy ...
When user access the portal and when he clicks on BSP/WD , the URL get re-directed to backend system.
But , as your backend system is not expose on internet , you get an error as host not found.
So, to solve your problem you have to expose your backend system on internet. It is in general pratice to expose on internet.
Thanks
Anil -
401 Unauthorized: Running portal behind an APACHE reverse proxy
Hello to all,
we've got following scenario:
www <-HTTPS-> APACHE (external SSL termination) <-HTTPS-> portal
If I call the internal URL (https://backend.xy.de:443/irj/portal) of the portal,
I'll be redirected to the logon servlet and logon to the portal application is possible.
Now we set up a APACHE reverse proxy in oder to access the portal from internet.
I've set up a virtual host:
<VirtualHost test.xy.de:443>
<Location />
ProxyPass https://backend.xy.de:443/
ProxyPassReverse /
</Location>
</VirtualHost test.xy.de:443>
But now if I call the portal application https://test.xy.de/irj/portal I get the following error:
Unauthorized
This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
Any idea how to fix this?
Regards ChristianHello Tobias,
I have adapted your idea, but without success.
I've checked the cookies. No cookies are delivered by the J2EE-Server.
HTTP-ResponseHeader contains following entries:
HTTP/1.1 401 Unauthorized
Date: Thu, 26 Jan 2012 08:31:55 GMT
WWW-Authenticate: Negotiate
Content-Length: 381
Keep-Alive: timeout=15, max=100
Connection: Keep-Alive
Content-Type: text/html; charset=iso-8859-1
But its a bit strange.
If I call url https://xy.de/index.html the start page will be displayed.
A log on to system information is possible, but if I try to open the nwa, I get the same error.
So I think this is a problem with the logon servlet. Sites with basic-authentication work.
Calling the logon servlet direct https://xy.de/logon/logonServlet I get the same error.
I don't think, there is a problem with the apache configuration.
If I change the ProxyPass directive to another J2EE server everything works fine.
There is only one difference between both system.
System 1 (error system) is a SAP Netweaver 7.01 SP10
The other system is a SAP Netweaver 7.02 SP 9
Regards Christian
Edited by: Christian Kaiser on Jan 26, 2012 9:53 AM -
Accessing Fiori from Apache reverse proxy.
Hi All,
I have installed Fiori setup in local network.
When I tried to access the URL from External world using Apache Reverse Proxy Server installed in DMZ it is not getting connected.
Is there any specific configuration that we need to do in Fiori? Can any one help me on this.
cc:Babu Ganesh V
Thanks
-Arun
Tags edited by: Michael ApplebyHi Masa,
I think we have a similar issue when opening the Fiori Launchpad.
Directly accessing the gateway server works fine in the intranet.
Going via the Apache reverse proxy shows the following in InternetExplorer F12 Developer Tools:
Request:
/sap/opu/odata/UI2/PAGE_BUILDER_PERS/PageSets('%2FUI2%2FFiori2LaunchpadHome')?$expand=Pages/PageChipInstances/Chip/ChipBags/ChipProperties,Pages/PageChipInstances/RemoteCatalog,Pages/PageChipInstances/ChipInstanceBags/ChipInstanceProperties,AssignedPages,DefaultPage
Response:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head><title>404 Not Found</title></head>
<body>
<h1>Not Found</h1>
<p>The requested URL /sap/opu/odata/UI2/PAGE_BUILDER_PERS/PageSets'/UI2/Fiori2LaunchpadHome') was
not found on this server.</p>
</body></html>
I assume the issue is with either the URLencoded part %2FUI2%2FFiori...
or with the brackets, the dollar sign or the commas used in the URL.
Could you maybe point out what's the crucial parts we need to add to our Apache Reverse Proxy config?
So far we have mainly used
ProxyPreserveHost On and
ProxyPass and ProxyPassreverse pairs.
What do we need to get the bracket (, the URLencoded part, the $ or the , through to the gateway server.
Regs Ulf -
Sun Web Server Reverse Proxy and Weblogic HTTP to HTTPS redirection
Hi,
I am currently testing reverse-proxy from SJSW 7.0 update 5 to Weblogic server but I have encountered an issue.
I have configured a context root to be forwarded to weblogic:
Web Server: www.server.com
URI: /path
Reverse Proxy URL: wlserver:9000
When I access https://www.server.com/path, I am getting the correct page. The issue is, the weblogic server is configured to redirect HTTP access to HTTPS, i.e., when I access http://www.server.com/path, it should be redirected to https://www.server.com/path. However, that is not the case. What happens is that I am being redirected instead to https://www.server.com/.
If I don't use reverse proxy, that is, if I use the libproxy.so from weblogic, I get the correct redirection.
Would appreciate it very much if someone can help me troubleshoot this issue.
Thanks in advance!
Edited by: agent_orange on Jul 29, 2010 2:30 AM
Edited by: agent_orange on Jul 29, 2010 2:31 AMI am not sure, how you have configured your reverse proxy since you didn't attach / refer your current configuration file. this is how I would do it..
- create a new configuration (using web server 7 admin gui , within configuration wizard, disable java option if you plan to use web server 7 only for reverse proxy)
- select this new configuration and go to reverse proxy and try to reverse proxy / to the origin server.
that is all it should need.
your obj.conf or <hostname>-obj.conf depending on your configuration should look like following snippet
<Object name="default">
AuthTrans..
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</object>
<Object name="reverse-proxy-/">
Route fn=....
Service ..
</Object>
this is all you should need..
However, if you wanted to add complexity to your configuration, you could do some thing like
<Object name="default">
Auth..
<If defined $security>
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</If>
</Object>
<Object name="reverse-proxy-/">
Route...
</Object> -
Problem with Apache reverse proxy after applying SP13 NW
Hello,
we have a NW04 EP Portal and a Apache reverse proxy in the DMZ. After applying SP 13 for the portal we get the following error from the reverse proxy:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /irj/.
Reason: Error reading from remote server
Apache/2.0.52 (Win32) mod_ssl/2.0.52 OpenSSL/0.9.7e Server at servername.company.de Port 443
Is is it possible, that there is a problem with sp13?
Best regards
Daniel HolsteinHi Daniel,
ok I`ll try to find a solution in parallel and keep you up to date.
In the following my settings in case I missed something:
<VirtualHost test.firma.de:443>
SSLEngine on
SSLProxyEngine on
SSLCertificateFile /apache/keys/pac_ssl_qep_dmz_server.crt
SSLCertificateKeyFile /apache/keys/pac_ssl_qep_dmz_server.key
ServerName test.firma.de:443
ServerAdmin [email protected]
LogLevel debug
ErrorLog logs/ssl_443_error
CustomLog logs/ssl_443_access_log common
ProxyVia Off
ProxyPreserveHost On
ReWriteEngine on
ReWriteLogLevel 0
ReWriteLog logs//ssl_443_rewrite_http.log
ProxyPass / https://backend.firma.de:50001/
ProxyPassReverse / https://backend.firma.de:50001/
</VirtualHost>
Regards, Jens -
Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application
Hi Expert,
I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
I would know if the NGINX must be used also for SMP 2.3.
Any suggestion/information is appreciated.
Thanks in advance
g.Please see Agentry Network Landscapes
-
Hi,
I'm trying to install Apache Reverse proxy which will support both HTTP and HTTPS request.
<b>What do I need to activate to support the HTTPS requests?</b>
I installed Apache 2.0.53 Released and trying to activate the mod_ssl.
From Where can I get the mod_ssl.so?
I saw that there are 2 projects:
Apache Interface to OpenSSL (mod_ssl)
Apache-SSL
Do I need to use them in case I want to use HTTPs?
Regards,
YaelGet the latest oppenssl compile it. before you compile apache, execute ./configure --help in the apache directory. It will give you the commands that you need to use to activate and deactivate various things in apache.
mine is as follows:
./configure --with-layout=GNU --enable-proxy --enable-ssl --with-ssl=/usr/lo
cal/src/apachessl/openssl-0.9.7f/ --enable-vhost-alias --enable-rewrite --enable
-so --enable-proxy-http --enable-proxy-connect --enable- headers
then make and make install.
hope it helps.
Jai
Maybe you are looking for
-
Change the default row maximum in an Analysis report?
I'm using OBIEE 11.1.1.3 (and testing this on 11.1.1.5) and am curious how to change this setting: On all our Analysis reports we can view Rows 1 - 25 in the Results tab for the report. I want to change this so I can see more than 25 rows as my defau
-
InDesign CS5.5 Style sheets not working properly
Hello, I'm checking out a trial version of InDesign CS5.5 and am creating some paragraph style sheets that don't seem to be working. When assigning the latest style I've created to a paragraph, it changes the color I've spec'd, but not the typeface.
-
Downgrading iTunes to version 8 - can you still access the iTunes Store ?
Well guys ? Those of you who have successfully downgraded to version 8.. Can you guys still access the iTunes Music Store ? Can you still buy tracks , preview tracks the old way , and buy songs online with the iTMS & iTunes 8 ?
-
Removing the empty line during Receiver FCC!
Hi, Guys, I used file content conversion in receive FCC. My data type is like this: <TextFromSAP_DT> <FileName> <FileName>abc.txt</FileName> </FileName> <Record> <TEXT>dasfafaf</TEXT> </Record> <Record> <TEXT>qqqqqqqq</TEXT> </Record> <Record>
-
Archiving Smart Mailbox Messages
Is there a way to archive only the messages in a Smart Mailbox (alternatively, archive only selected messages). Thank you