Apache service doesnt start after clone

Hi
we have a cloned environment and after clone finished successfully (as mentioned in logs ) , Apache service doesn't start at all while all other services are started successfully
andwhen i issued adapcctl.cmd it resulted error status 2 . i think this might help .
E:\oracle\testcomn\admin\scripts\TEST_oratestapp>adapcctl.cmd start
ECHO is off.
ECHO is off.
Tue 01/03/2012 01:54 PM
Starting Oracle Apache Server TEST_oratestapp ...
The Oracle Apache Server TEST_oratestapp service is starting.
The Oracle Apache Server TEST_oratestapp service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
adapcctl.cmd exiting with status 2
E:\oracle\testcomn\admin\scripts\TEST_oratestapp>
Apps Version : 11.5.10.2 CU2
DB : 10.2.0.4
OS : Windows server 2003 SP2
Regards
Ahmed

we have a cloned environment and after clone finished successfully (as mentioned in logs ) , Apache service doesn't start at all while all other services are started successfully
andwhen i issued adapcctl.cmd it resulted error status 2 . i think this might help .Please check Apache log files as well as startup log file for details about the error.
Did AutoConfig complete successfully?
Thanks,
Hussein

Similar Messages

Apache won't start after ColdFusion Install

Any suggestions on what to look for, as to why Apache will
not start after installing ColdFusion MX Dev Edition on a Win 2003
Server? Is there something in a log file I could look at? Any help
is appreciated. Also, when I take the JRUN mod out of the Config
file, Apache starts back up..
Thanks,
Brian

If you're using Apache 2.2+ and CFMX 7+, then you need to
apply
a
hotfix for CF.
Once you update the wsconfig.jar file, re-run the Web Server
Configuration Tool. Remove the old Apache mapping and create a new
one.

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

My Imac doesnt start after de pasword, It continuos asking for it again and again, what can I do to start it?

My Imac doesnt start after de pasword, It continuos asking for it again and again, what can I do to start it?

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination   command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
          Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
           ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Concurrent Manager not started after Clonning - Forms not showing

Hi,
I have cloned PROD system into a TEST system using Rapid Clone.
After I started TEST services, I log into application but OracleForms are not working. When I click on a function which calls a selfservice form, it works well, but when the function calls an Oracle form, the Forms Environment is opened but there is only "Window" menu (which contains "tile", "cascade", etc).
The same situation even when I open directly from http://apptest.rmis:8000/dev60cgi/ifcgi60.exe.
Also Concurrent Manager service is not started. I deleted and recreated it, ran autoconfig, but the problem still persist.
Please help me to solve the issue.
Thank you.

Hi,
I did the relinking of all executables under FND, tried to adsvcm -deinstall (-install) and ran autoconfig successfully, but still CM service is started than stopped.
Here is the CM logfile:
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 15-FEB-2008 16:33:27 -
Shutting down Internal Concurrent Manager : 15-FEB-2008 16:33:27
Reviver is not enabled, not spawning a reviver process.
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-12222: TNS:no such
protocol adapter
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
Please help to solve this issue.
Thank you.

CF Mx6 admin & service wont start after successful new install on XP with IIS

I just installed a fresh copy of Coldfusion mx 6 on my
windows XP running IIS . After installation, the CF Administrator
didnt come up(
Http://Localhost:8500/CFDIE/Adminstartor.....whatever)-
loads on the browser but doesnt load the admin page.
Further attempts to manually restart the coldfusion server
from Control Panel>Adminstrative tools>services> prooved
abortive as it refused to start.
Please can anyone help me out there?
What aint I doing right?

thanks for reply
but my firewall is not on and the coldfusion server service
aint starting whiles the other two services(ODBC etc) are running
smooth.
cant afford to mess up my internet connection settings cos
it would warrant paying a visit to my ISP office with my PC . its a
mobile CDMA wireless box.
pls help or i ll drop CFM for PHP
chow

FYI: TrendMicro antivirus prevents Transport Service from starting after installing Echange Server 2013 Service Pack 1

I installed Exchange Server 2013 SP1 in my test environment. After that mail flow between internal and external mail servers completely stopped. In the end I discovered that Transport Service on both of the mailbox servers refused to start (or, to be more
exact, stopped shortly after starting).
The following events appeared in the System event log:
Event ID 1052 (error)
Source: MSExchange Extensibility
Message: Failed to create agent factory for the agent 'ScanMail SMTP Receive Agent' with error 'Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll'
due to error 'type not found'.'. Please verify the corresponding transport agent assembly and dependencies with correct version are installed.
Event ID 16023 (error)
Source: MSExchangeTransport
Message: Microsoft Exchange couldn't start transport agents. The Microsoft Exchange Transport service will be stopped. Exception details: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'. : Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'.
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
Event ID 701 (informational)
Source: MSExchangeTransport
Message: The service will be stopped. Reason: Microsoft.Exchange.Transport.TransportComponentLoadFailedException: Loading of component 'SmtpReceiveAgents' failed. ---> Microsoft.Exchange.Transport.TransportComponentLoadFailedException: The agent component
failed to load. ---> Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to
error 'type not found'.
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
   at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.RunADOperation(ADOperation adOperation, Int32 retryCount)
   at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.TryRunADOperation(ADOperation adOperation, Int32 retryCount)
   at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
   at Microsoft.Exchange.Transport.Components.Activate()
The reason for that behavior was TrendMicro ScanMail for Exchange 11. Seems that it was unable to work with the new SP properly and prevented the entire Transport Service from starting. Uninstallation of the antivirus eliminated the issue.

Actually, you can just disable the agents until TrendMicro releases a patch and then enable them again:
http://community.trendmicro.com/...
BTW, a similar problem (high CPU utilization and services not starting) is hitting the AVG package:
http://forums.avg.com/..
Step by Step Screencasts and Video Tutorials

Cluster and ASM services doesnt start automatically

Hi,
I have configured a 2 node 10g RAC environment (rac, rac2) in RHEL 4 through vmware.
However the cluster services and ASM services do not come up automatically after server reboot. I have to manually bring it up using ./srvctl command.
[root@rac2 bin]# ./crs_stat -t
Name          Type     Target     State     Host
ora....SM1.asm     application     ONLINE     UNKNOWN     rac
ora....AC.lsnr     application     ONLINE     UNKNOWN     rac
ora.rac.gsd     application     ONLINE     UNKNOWN     rac
ora.rac.ons     application     ONLINE     UNKNOWN     rac
ora.rac.vip     application     ONLINE     ONLINE     rac
[email protected]     application     ONLINE     UNKNOWN rac2
ora....C2.lsnr     application     ONLINE     UNKNOWN     rac2
ora.rac2.gsd     application     ONLINE     UNKNOWN     rac2
ora.rac2.ons     application     ONLINE     UNKNOWN     rac2
ora.rac2.vip     application     ONLINE     ONLINE     rac2
Could someone please guide me as to how these services can be brought up automatically upon every reboot?

Normally all services will start automatically, I am not sure how you installed and configured your RAC.
Here i am giving all options.
Option1:-
Re: CRS auto-start
Option2:-
See the below links.
http://jaffardba.blogspot.com/2009/03/how-to-startup-rac-database-services.html
http://www.dannorris.com/2009/03/12/start-database-services-automatically-after-instance-startup/
Option3:-
if you simply want to start the service upon server reboot, put srvctl
command in rc.local script under /etc directory.
Hope this solves your issue.
Regards
Click here to [createdisk, deletedisk and querydisk in ASM|http://www.oracleracexpert.com/2009/09/createdisk-deletedisk-and-querydisk-in.html]
Click here to see [ RAC database Instance hang/restart due to node eviction and Solution.|http://www.oracleracexpert.com/2009/09/ora-29740-evicted-by-member-0-group.html]
Click here for [Cross platform Transportable tablespace using RMAN|http://www.oracleracexpert.com/2009/10/cross-platform-transportable-tablespace.html]
http://www.oracleracexpert.com

Oracle 8i. Service says "STARTING" after installing Windows SP 4

Hello All,
I installed windows 2000 SP 3, VS .NET, Oracle 8i.
I restarted the computer and it was ok.
After that I went to microsoft and update windows with SP 4 and current patches.
After that I restarted the computer and my
ORACLE service says "starting" and not "started"
Is there problem with Oracle 8i and SP 4 and current security patches ??
My configuration is - Windows 2000 SP 4, Oracle 8i and VS .NET on Pentinum 4
Please help.
Thank you
Nick....

Nick,
Go to Microsoft KB835732. This has worked for 2 of 3 databases.

HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked the event log which says the audio service cannot start because it can't find the path specified. How can I solve this problem?

If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Concurrent Manger not startted after clone in apps 11i

Hi All,
After clone refresh concurrent managers are not started. The value of concurrent_queue_name, node_name is not correct in table fnd_concurrent_queues table.
O/P of the queries
SQL> SELECT trigger_name , status FROM user_triggers WHERE table_name = 'FND_NODES' ;
TRIGGER_NAME STATUS
UPNAME ENABLED
FNDSM ENABLED
SQL> select concurrent_queue_name, node_name from fnd_concurrent_queues where manager_type=6;
CONCURRENT_QUEUE_NAME NODE_NAME
FNDSM_CLONEAPPL CLONEAPPL
FNDSM_PRODDB PRODDB
FNDSM_PRODAPPL PRODAPPL
FNDSM_AUTHENTICATION AUTHENTICATION
It would contain value as clonedb instead of proddb. can i manually edit this table and retest the issue?
Please any suggestions will be greatly appreciated.
Thanks in Advance.

Hi,
Can you find any errors in the CM log file?
Please follow the steps in (Note: 391406.1 - How to get a clean Autoconfig Environment) to clean FND_NODES table and run AutoConfig on the database and the application tier nodes, and check then. You may also run cmclean.sql (Note: 134007.1 )once AutoConfig is done and before starting the CM.
Regards,
Hussein

Lightroom 6 doesnt start after installation

hello,
after installing LR6 on imac 2013 os 10.9.5 doesnt start LR correct. When you start LR you can see the start picture of LR for a very short time. Than the picture disspear and nothing happens anymore. LR doesnt start. Is the any one with the same problem? Solution?
regards in hope of help
bodo

Try signing out of the desktop app per these instructions: Sign in, Sign out | Creative Cloud desktop app

Addon-Manager doesnt start after updating to Firefox 9.01

After updating to Firefox 9.01 the Addo-Manager doesnt start. The screen only shows loading...

Click on the Extensions item on the Addons Manager tab.

Macbook pro doesnt start after office installation

after installing mac office my mac book pro doesnt start anymore

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

FE service cannot start after the update was done

Hi,
We are installing lync 2013 standard Edition server on windows server 2008 R2.
Certificates are public ones and they are from Digicert.
We managed to go to step 3 (certificates part is ok).
We cannot start the FE service.
We tried everything regarding resetting fabric state, registrat etc.
We made the update with the newest patch (February 2015).
FE cannot be started:
We still got the errors:
"Failed to sync data for Routing group {19F4D868-D0A1-53D8-BE89-1BFA7BDE645E} from backup store.
Cause: This may indicate a problem with connectivity to backup database or some unknown product issue.
Resolution:"
"This process was not able to update its health status
The Audio-Video Conferencing Server failed to send health notifications to the MCU factory at.."
and so on...
as could be seen under link: http://troubleshootinglync.blogspot.com/2014/03/lync-2013-front-end-service-wont-start.html
Any idea what could be wrong?

Hi iron_folower,
You can follow the steps below to troubleshoot your problem:
1. Install the Root Certificate and the Intermediate Certificate from Digicert.
2. From:
https://social.technet.microsoft.com/Forums/lync/en-US/506821e2-d3fe-42bd-a6dc-daed6c5f0df6/the-audiovideo-conferencing-server-failed-to-send-health-notifications-to-the-mcu-factory-at?forum=ocsconferencing
Try to create the REG key:
HKLM\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL and create a dword entitled
Sendtrustedissuerlist with a hax value of 0.
3. Reinstall the base OS features:
Import-Module ServerManager
Add-WindowsFeature Web-Dyn-Compression,desktop-experience,RSAT-ADDS,Web-Server,Web-Scripting-Tools,Web-Windows-Auth,Web-Asp-Net,Web-Log-Libraries,Web-Http-Tracing,Web-Stat-Compression,Web-Default-Doc,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Http-Errors,Web-Http-Logging,Web-Net-Ext,Web-Client-Auth,
Web-Filtering,Web-Mgmt-Console,Msmq-Server,Msmq-Directory
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Apache service doesnt start after clone

Similar Messages

Maybe you are looking for