Apache Web Services Listener not starting after bouncing application

Can some one please help? I am runnng 11.5.10.2 on Solaris.
==========
Problem:
==========
I can not start my Apache Web Services Listener via ADSTRTAL.SH (log filed saved with 0 (zero) bytes – so no results to look at).
I also tried to start it using the adapcctl.sh start as the applmgr user and I get the same error as adstrtal.sh.
I ran apachectl configtest and got “Bus Error”
==========
Question:
==========
How do I fix this problem (bus error and get Apache listener to run)?
-OR-
Where do I go to edit this file and is it the http.conf file?

Problem solved, disk drive was full.

Similar Messages

Web Service will not start

I tried installing ColdFusion 9 and linking apache to the install. Because the Apache binary was 64bit I had to convert it to 32bit to for the ColdFusion install to work. I backed up the 64bit version and made the new 32bit version my httpd file.
After installing coldfusion finished I went to update some sites in Server Admin. When I tried to save changes in sites (removing a site) the list of sites went blank, clicked on settings, then back to sites, and the changes were not saved.
I restarted the entire server. When I came back to Server Admin and tried to "Start Web" i received the following error:
Try to refresh the view (waterengine.local/Web). (Could not start web service - details in error log.) 100002
I've already replaced the httpd file back to the original 64bit version and will now uninstall coldfusion. Is there a way to reinstall the web services? Seems like the most likely resolution.

Had to reinstall the server OS because I couldn't find anywhere to do a reinstall of only the Web Service/Apache. I've downloaded the ColdFusion 9 64bit version. hopefully this works or I'll reinstall the OS one more time and give up on running ColdFusion 9 on this system until I can find someone who has done a successful install. This time I'll backup so I don't have to do a 45 minute remote re-install, although I thought that was pretty fast over wifi.

Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please advice

The Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Error message:This IPHONE cannot be used because the Apple Mobile Device service is not started, after trying to upgrade to IOS5

Error message:This IPHONE cannot be used because the Apple Mobile Device service is not started. It is a 3GS version 4.3.5 (8L1). I had upgraded my ITUNES and after two attempts to update to IOS 5 (it timed out each time), I am now getting the message above. everything seems to be working. I have rebooted both computer and IPHONE. I am have had for couple of years. Anyone have other tips or ideas?

There are instructions on this page for how to start it and how to set it to start automatically : http://support.apple.com/kb/TS1567

FNDFS Listener not starting after patching

12.1.3
redhat 4.8
DB 11.2.0.1
We recently did patching on our R12 system. The system is online, however the concurrent managers are not working due to the APPS_NPCP listener not starting. When attempting to start FNDFS this is the error we get. This was a working system prior to applying the patches. I can provide a list of patches if needed. There were just under 30 of them I believe. The majority of them were in doc # 437878.1
[applnpcp@ahdsedstws16 apps_backup]$ adalnctl.sh start
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_NPCP.
adalnctl.sh: exiting with status 1
<============From adalnctl.txt logfile =================>
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=ebusr12)(Port=1636))
TNS-12533: TNS:illegal ADDRESS parameters
TNS-12560: TNS:protocol adapter error
TNS-00503: Illegal ADDRESS parameters
Listener failed to start. See the error message(s) above...
09/10/13-13:52:41 :: adalnctl.sh: exiting with status 1
<======================end=======================>
Nothing really should have changed in the context file or in how the tnsnames.ora is generated, looking at the file it appears correct. What else can I check as to why this won't start anymore?

Where the patches applied to the correct ORACLE_HOME?
Have you verified the contents of listener.ora and tnsnames.ora file under $TNS_ADMIN directory? Running AutoConfig should usually fix those files (assuming it completes successfully and you have proper entry in the /etc/hosts file and your FND_NODES table entries are correct).
How to get a clean Autoconfig Environment ? (Doc ID 391406.1)
Thanks,
Hussein

Apache failover service does not start - must zone name be the same?

Hello,
When I brought online apache data service, it starts successfully, then immediately fails. So the service starts up on the other node, then fails. No clear error message.
I'm thinking of potential causes:
- Could this be b/c the local zone names are different on both nodes? However, the zone paths are the same.
- The ftp-temp hostname is defined only on the 2 nodes /etc/hosts, not in DNS. In nsswitch.conf, I have "hosts: cluster files dns".
- I have the Bin_dir property set to /opt/xampp/bin. I can start up /opt/xampp/bin/apachectl start fine. Since I'm using xampp's apache, should I NOT be using SUNW.apache, but a generic data service?
- Does the Apache service must be under SMF control? Does sun cluster stop/start date services using SMF?
I'm running Solaris 10, SC 3.2
I want to fail over the Apache service betwn the local zones (not fail over the whole zone).
Here's what I did in setting up the resource from the global zone:
jupiter # clresource create -g ftp4-acme-com-rg -t SUNW.apache -p Bin_dir=/opt/xampp/bin -p
Network_resources_used=ftptemp -p Port_list=80/tcp,443/tcp,20/tcp,21/tcp xampp-apache
The ftp4-acme-com-rg was in unmanaged state.
jupiter # clresourcegroup online -emM ftp4-acme-com-rg
In /var/adm/messages:
Nov 24 13:25:47 jupiter Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ftptemp state on node jupiter:ftp-acme-zone2 change to R_ONLINE
Nov 24 13:25:49 jupiter Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource xampp-apache status on node jupiter:ftp-acme-zone2 change to R_FM_ONLINE
Nov 24 13:25:49 jupiter Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource xampp-apache status msg on node jupiter:ftp-acme-zone2 change to <Completed successfully.>
At this point, I saw the virtual ip plumbed up. Also, noticed 'online' states.
Resource Groups
Group Name Node Name State Suspended
Group: ftp4-acme-com-rg
jupiter:ftp-acme-zone2 Pending online No
Group: ftp4-acme-com-rg
pluto:ftp_zone Offline No
Resources --
Resource Name Node Name State Status Message
Resource: ftptemp jupiter:ftp-acme-zone2 Online Online - LogicalHostname online.
Resource: ftptemp pluto:ftp_zone Offline Offline
Resource: xampp-apache jupiter:ftp-acme-zone2 Starting Online - Completed successfully.
Resource: xampp-apache pluto:ftp_zone Offline Offline
The next message occurs 5 minutes later:
Nov 24 13:30:52 jupiter Cluster.RGM.rgmd: [ID 764140 daemon.error] Method <apache_svc_start> on resource <xampp-apache>, resource group <ftp4-acme-com-rg>, node <jupiter:ftp-acme-zone2>: Timeout.
Nov 24 13:30:52 jupiter Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource xampp-apache state on node jupiter:ftp-acme-zone2 change to R_START_FAILED
Nov 24 13:30:52 jupiter Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group ftp4-acme-com-rg state on node jupiter:ftp-acme-zone2 change to RG_PENDING_OFF_START_FAILED
Same messages on the 2nd node.
This is the final status:
-- Resources --
Resource Name Node Name State Status Message
Resource: ftptemp jupiter:*ftp-acme-zone2* Offline Offline - LogicalHostname offline.
Resource: ftptemp pluto:*ftp_zone* Offline Offline - LogicalHostname offline.
Resource: xampp-apache jupiter:*ftp-acme-zone2* Offline Offline - Successfully stopped Apache Web Server.
Resource: xampp-apache pluto:*ftp_zone* Offline Offline - Successfully stopped Apache Web Server.
Any input would be appreciated.
Edited by: onetree on Nov 24, 2008 9:38 PM
Edited by: onetree on Nov 24, 2008 10:23 PM

Hi,
Did you eventually find the root cause/solution to this problem? I got into the same thing on my setup where I created 2 zones on a solaris 10 node. The apache on any of the 2 zones just dont seem to start up. In the end clrg failed after a few attempts on both zones. The time out is about 5 min after apache_svc_start was launched. I grepped httpd and no such process was launched. It does not like it is monitor issue. Logicalhost resource is started ok. so I am not sure if there is any security or access issue involed for apache_svc_start.
Mar 6 16:03:05 miwok.nms.fnc.fujitsu.com Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method
<apache_svc_start> for resource <apache-res>, resource group <apache-rg>, node <miwok.nms.fnc.fujitsu.com:ho
st1>, timeout <300> seconds
Mar 6 16:03:05 miwok.nms.fnc.fujitsu.com Cluster.RGM.global.rgmd: [ID 784560 daemon.notice] resource apache-
res status on node miwok.nms.fnc.fujitsu.com:host1 change to R_FM_UNKNOWN
Mar 6 16:03:05 miwok.nms.fnc.fujitsu.com Cluster.RGM.global.rgmd: [ID 922363 daemon.notice] resource apache-
res status msg on node miwok.nms.fnc.fujitsu.com:host1 change to <Starting>
Mar 6 16:08:07 miwok.nms.fnc.fujitsu.com Cluster.RGM.global.rgmd: [ID 764140 daemon.error] Method <apache_sv
c_start> on resource <apache-res>, resource group <apache-rg>, node <miwok.nms.fnc.fujitsu.com:host1>: Timeou
t.
One qestion is: do I have to install 3 separate copies of apache on global/zone1/zone2? I just had the default copy under /usr/apache.
Any info would be appreciated.
Mike

11.1.2 opmn_EPM_epmsystem1 service will not start after server move

Moved our 11.1.2 Windows 2008 SP2 (not R2) 64 bit machines from one domain to the other (test to prod) and reconfigured the repositories to the prod SQL server (2005). Configuration is all green yet the EPM_epmsystem1 will not go to started. It sticks at Starting and after some type of time out stops.
We run as administrator thinking that would be the problem but to no avail. We tried the delivered script but to no avail either.
In the E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\OPMN\opmn directory the opmn.log shows only this:
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: E:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\states
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready. Request handling enabled.
[2011-01-19T14:48:44][opmn][ERROR:1][17][OPMN][code:ons-listener]172.16.10.31,6712: BIND (Unknown error)
Looking for avenues on how to resolve this ...
JTS

Hi John,
I still get the same error message when i start the opmn from the command prompt.
[2011-01-20T08:17:28][opmn][NOTIFICATION:1][675][OPMN]OPMN server ready. Request handling enabled.
[2011-01-20T08:17:28][opmn][ERROR:1][17][OPMN][code:ons-listener]10.177.63.163,6712: BIND (Unknown error)
Its a VM Image and i havent sent any ipaddress in the host file too.
however i am unable to start the OPMN (epmsystem1) service too from services.msc and it throw below error
Could not start the Oracle Process Manager (EPM_epmsystem1) service on a Local Computer.
Error 1053: The server did not respond to the start or controle request in a timely fashion.
Please help i am unable to start essbase from any of them

Oracle Service does not start after installation of Domain role

Hi all,
here is my setting:
Windows Server 2008 R2 64bit
ORACLE ONE 11g
I installed the database and it was working fine until I installed the domain controller role on this server.
Finally I needed to uninstall this role again and restarted the server several times during this process.
Now I can not access the database anymore. Listener starts, then stops.
database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
Thanks in advance...
Meden
Edited by: user10859969 on 13.01.2012 14:29

And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
So the best solution is CTRL-ALT-DEL and start all over again.
If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
Sybrand Bakker
Senior Oracle DBA

Dbconsole service does not start after renaming Hostname

Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
Thanks

Hi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj

Help Required...Web Service does not start automatically...

I have a web service created with a EJB, everything is fine now.
After restarting the Server, web service doesn't get start automatically.
I have done the changes for the EJB - .ear project - application-j2ee-engine.xml file with the below.
<start-up mode="always"/>
But it still doesnt start. any help is appreciated.
This is the document i have referred.
http://help.sap.com/saphelp_nw04s/helpdata/en/25/0c08f3981343609d4045f8acaa0a76/frameset.htm
Thanks,
Sridhar
Edited by: Sridhar k on Jan 5, 2009 9:11 AM

Hai,
Just a tought...:-|
Check the value in your file, is it typing mistake or you have entered the same in your file.
<start-up mode="always"/> it should be <start-up mode="always">.
Regards,
Yoganand.V

Web Service do not work after save in Designer ES2 SP1

Dear all,
I am trying to migrate 8.2.1 process to ES2.
Although it have some bugs, but the process are working fine when using ES2 without any SP.
One day we installed SP1 for ES2 and hopeing for some bugs we found fixed, but find none of them fixed... oh well, so we continue the migration.
And the problem happen when we try to modify the form for some testing, we find that even we *did not* modify anything in the form, if we pressed the save button and deploy the form, all the web service related code in the form will stop working.
Anyone have any idea about this?
Thanks in advance.
Regards
Bill

Hi Paul,
Thanks for the suggestion.
Already tried to update the dataconnection by right click at data view, and choice "Refresh Data View", but that doesn't help, would like to know are there any others way to do so?
I already open a case with the support, but it seem that the engineer in APAC region have a very slow response time...
Just wonder if I can send the case to others support center with better response time.
I tried to compare the form before and after save and find that some information may missing in the post-SP1 form.
In the pre-SP1 from, I can find a <dd:dataDescription> section for every web service used in the form, but in the post-SP1 form they are missing.
I tried to add that section back and it will make the web service usable again, but the problem is I need to do that every times I modify anything, and I also need to create this section for a every new web service added to the form...
Regards
Bill

Listener not starting after restart

Hello,
After rebooting my Windows PC yesterday, I can't get the Listener to start. I've read every post I could find on this and nothing has helped so far.
When I try to start the listener on the command line, I get this error:
C:\Documents and Settings\rws5997.IPCO>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-SEP-2009 09:24
+:26+
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to start service, error 0.
TNS-12560: TNS:protocol adapter error
When I check the listener status I get this:
C:\Documents and Settings\rws5997.IPCO>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-SEP-2009 09:19
+:14+
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=C0104454)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
+32-bit Windows Error: 61: Unknown error+
Here is my listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = C0104454)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And here is my hosts file:
127.0.0.1 localhost
192.168.1.1 C0104454
Any ideas would be appreciated!
Richard

Hi Richard,
why would you set the ORACLE_HOME variable in your OS environment anyway?
If you want to switch between different Oracle Homes you might want to look at the "Oracle Locator Express" from DbMotiveTools:
http://daust.blogspot.com/2006/03/xe-oracle-home-selector.html
Really helpful, especially if you have multiple Oracle environments on your box.
Regards,
~Dietmar.

Engine Service will not start - New Install

Trying to install NSM on a Windows 2008 r2 server and the Engine service will not start after the files are installed.
File Resource Manager is installed along with fully patched .NET 4.
Windows Logs give the below error before the service not starting failure.
Activation context generation failed for "C:\Program Files\Novell\Storage Manager\Engine\sqlite3.dll". Dependent Assembly Microsoft.VC90.CRT,processorArchitecture="amd64",p ublicKeyToken="1fc8b3b9a1e18e3b",type="win32",vers ion="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.

Fixed. I missed the .NET 3.5 requirement.

RAC service can't start after upgrading to 10.2.0.4

Hi All,
After upgrading to 10.2.0.4 from 10.2.01 (linux32 with 2 nodes), I am experiencing the following:
1. The rac service (created after the database was created, not the default service) can not start after the database started with "prkp-1030" error.
2.The service somehow is online and available from the "lsnrctl status" command. Further verified that the users could connect to the rac via that service.
3. The "crs_stat -t" command and the "srvctl status service..." also show the service is not running.
Have anyone seen this problem before? what is need to be done to make it consistent.
Thanks,
TN

I found something that might cause this problem.
When I shut down everything (service, db, asm, nodeapps), and start them back on one by one in the opposite order (nodeapps, asm, database). I found out that the service is somehow get restarted when I start the database (when I have yet started the service itself). the lsnrctl status shows that the service is up. but the crs_stat shows the service is down.
My question is that why the service is tied up with the database startup (using srvctl start database -d database_name)?

Apache Web Services Listener not starting after bouncing application

Similar Messages

Maybe you are looking for