Apache-Weblogic Bridge does not work?
I've gone thru' the documentation regarding setting up of apache-weblogic bridge, but still it does not work. Does anyboday have any more details regarding this...EnvironmentOS - Solars 5.7Weblogic - 5.1 SP 8Apache 1.3.12
I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!
Similar Messages
-
Laoding files into layers from bridge does not work
Using photoshop ver 14.2.1x64 and bridge on a PC.. While in Bridge, I selected 2 pictures, selected tools, photoshop and load files into layers. It does not work. any ideas of how to make it work
You get 5 gold stars, I also have cc2014 and it works, thank you.
On Wed, Oct 29, 2014 at 4:56 PM, Warunicorn <[email protected]> -
Thunderbolt-Bridge does not work after Yosemite upgrade
Hi,
recently I upgraded my MacBook pro (late 2013) to OS X 10.10.
Now the thunderbolt - gigabit ethernet bridge is not recognised anymore.
More specific the "Network Preference" pan does say that it is disconnected -> no network connection.
At the same time the "System Information" window does say it is connected.
I already tried several reboots, a reboot in save mode and deleting the networks environments to start from scratch.
But nothing helps.
Before the upgrade, the bridge worked fine (sometimes it was recognised slowly).
The bridge itself is a original apple bridge with firmware version 5.5 (PMFV 0.0.8).
Any ideas?
Cheers, freemanHmm, there is a lot of red.
EtreCheck version: 2.1.3 (106)
Report generated 16. Dezember 2014 16:28:18 MEZ
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,1
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris -
Color LCD spdisplays_2560x1600Retina
PL2409HD spdisplays_1080p
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 7 days 18:4:18
Disk Information: ℹ️
APPLE SSD SD0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (16.34 GB free)
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Logitech USB-PS/2 Optical Mouse
Apple, Inc Apple Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Transmit.app
[loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Support]
/Library/Application Support/Hotspot Shield
[loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) [Support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.Maps.pushdaemon.plist
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.nsurlsessiond.plist [Details]
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.systemstats.analysis.plist [Details]
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[invalid?] com.cisco.anyconnect.gui.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
[running] jp.co.canon.CUPSPS2.BG.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.anchorfree.ajaxserver.plist [Support]
[running] com.cisco.anyconnect.vpnagentd.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
Citations Programm (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
Bartender Programm (/Applications/Bartender.app)
iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
TransmitMenu Programm (/Applications/Transmit.app/Contents/MacOS/TransmitMenu.app)
AeroFS Programm (/Applications/AeroFS.app)
owncloud Programm (/Applications/owncloud.app)
BetterSnapTool Programm (/Applications/BetterSnapTool.app)
Internet Plug-ins: ℹ️
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.235 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Mathematica: Version: 10.0.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
AdBlock [Installed]
ClickToFlash [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
TeXDistPrefPane [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 233.43 GB
Destinations:
TMBackup [Network]
Total size: 982.05 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 982.05 GB > (Disk size 249.77 GB X 3)
LACIE SHARE [Local]
Total size: 400.08 GB
Total number of backups: 12
Oldest backup: 2014-10-20 13:12:53 +0000
Last backup: 2014-12-07 20:24:45 +0000
Size of backup disk: Too small
Backup size 400.08 GB < (Disk used 233.43 GB X 3)
Top Processes by CPU: ℹ️
49% WindowServer
3% Little Snitch Agent
1% Mathematica
1% WolframWorkbench
1% coreaudiod
Top Processes by Memory: ℹ️
352 MB Safari
301 MB Mail
232 MB WolframWorkbench
223 MB Finder
129 MB aerofsd
Virtual Memory Information: ℹ️
153 MB Free RAM
2.26 GB Active RAM
2.05 GB Inactive RAM
1.93 GB Wired RAM
99.60 GB Page-ins
3.48 GB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 11:27:06 PM ajaxserver_2014-12-14-232706_MacBook-Pro.crash
Dec 14, 2014, 11:26:14 PM ajaxserver_2014-12-14-232614_MacBook-Pro.crash
Dec 14, 2014, 11:25:43 PM ajaxserver_2014-12-14-232543_MacBook-Pro.crash
Dec 14, 2014, 11:24:40 PM ajaxserver_2014-12-14-232440_MacBook-Pro.crash
Dec 14, 2014, 11:24:09 PM ajaxserver_2014-12-14-232409_MacBook-Pro.crash
Dec 14, 2014, 11:23:58 PM ajaxserver_2014-12-14-232358_MacBook-Pro.crash
Dec 14, 2014, 01:13:42 AM ajaxserver_2014-12-14-011342_MacBook-Pro.crash
Dec 14, 2014, 01:12:08 AM ajaxserver_2014-12-14-011208_MacBook-Pro.crash
Dec 14, 2014, 01:14:24 AM ajaxserver_2014-12-14-011424_MacBook-Pro.crash
Dec 14, 2014, 11:26:46 PM ajaxserver_2014-12-14-232646_MacBook-Pro.crash
Dec 14, 2014, 11:25:01 PM ajaxserver_2014-12-14-232501_MacBook-Pro.crash
Dec 14, 2014, 11:24:30 PM ajaxserver_2014-12-14-232430_MacBook-Pro.crash
Dec 14, 2014, 01:14:45 AM ajaxserver_2014-12-14-011445_MacBook-Pro.crash
Dec 14, 2014, 01:12:29 AM ajaxserver_2014-12-14-011229_MacBook-Pro.crash
Dec 14, 2014, 01:11:58 AM ajaxserver_2014-12-14-011158_MacBook-Pro.crash
Dec 14, 2014, 11:25:22 PM ajaxserver_2014-12-14-232522_MacBook-Pro.crash
Dec 14, 2014, 11:26:04 PM ajaxserver_2014-12-14-232604_MacBook-Pro.crash
Dec 14, 2014, 11:24:51 PM ajaxserver_2014-12-14-232451_MacBook-Pro.crash
Dec 14, 2014, 01:13:01 AM ajaxserver_2014-12-14-011301_MacBook-Pro.crash
Dec 16, 2014, 02:52:02 PM Quicksilver_2014-12-16-145202_MacBook-Pro.crash
Dec 15, 2014, 02:27:36 PM SourceTree_2014-12-15-142736_MacBook-Pro.crash
Dec 14, 2014, 11:27:17 PM ajaxserver_2014-12-14-232717_MacBook-Pro.crash
Dec 14, 2014, 11:26:56 PM ajaxserver_2014-12-14-232656_MacBook-Pro.crash
Dec 14, 2014, 11:26:25 PM ajaxserver_2014-12-14-232625_MacBook-Pro.crash
Dec 14, 2014, 11:25:53 PM ajaxserver_2014-12-14-232553_MacBook-Pro.crash
Dec 14, 2014, 11:25:32 PM ajaxserver_2014-12-14-232532_MacBook-Pro.crash
Dec 14, 2014, 11:25:11 PM ajaxserver_2014-12-14-232511_MacBook-Pro.crash
Dec 14, 2014, 11:24:19 PM ajaxserver_2014-12-14-232419_MacBook-Pro.crash
Dec 14, 2014, 01:15:17 AM ajaxserver_2014-12-14-011517_MacBook-Pro.crash
Dec 14, 2014, 01:15:06 AM ajaxserver_2014-12-14-011506_MacBook-Pro.crash
Dec 14, 2014, 01:14:56 AM ajaxserver_2014-12-14-011456_MacBook-Pro.crash
Dec 14, 2014, 01:14:35 AM ajaxserver_2014-12-14-011435_MacBook-Pro.crash
Dec 14, 2014, 01:14:14 AM ajaxserver_2014-12-14-011414_MacBook-Pro.crash
Dec 14, 2014, 01:14:03 AM ajaxserver_2014-12-14-011403_MacBook-Pro.crash
Dec 14, 2014, 01:13:53 AM ajaxserver_2014-12-14-011353_MacBook-Pro.crash
Dec 14, 2014, 01:13:22 AM ajaxserver_2014-12-14-011322_MacBook-Pro.crash
Dec 14, 2014, 01:13:11 AM ajaxserver_2014-12-14-011311_MacBook-Pro.crash
Dec 14, 2014, 01:12:50 AM ajaxserver_2014-12-14-011250_MacBook-Pro.crash
Dec 14, 2014, 01:12:40 AM ajaxserver_2014-12-14-011240_MacBook-Pro.crash
Dec 14, 2014, 01:12:19 AM ajaxserver_2014-12-14-011219_MacBook-Pro.crash
Dec 14, 2014, 11:26:35 PM ajaxserver_2014-12-14-232635_MacBook-Pro.crash
Dec 14, 2014, 01:13:32 AM ajaxserver_2014-12-14-011332_MacBook-Pro.crash -
Bridge does not work for wireless clients - connecting to existing network.
Hi - I really hope somebody can help out here, after hours of trial & error, I have finally given up
I need to connect my Airport Extreme Base Station to my existing network. I have a linksys router (192.168.15.1) connected to my modem and this linksys router acts as DHCP server too.
I suppose I have to use "bridge mode" for that to work. But should the linksys be connected to the AEBS using the AEBS's WAN or LAN port?
If I use "bridge mode", then wired computers to the AEBS works fine - getting an IP from the linksys etc. BUT, the wireless clients will have a self-assigned IP and not get through to the internet. It's like the AEBS will not allow wireless clients to "get through" unless AEBS itself is handing out IP addresses.
Page 36 of this manual ( http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf ) shows the setup I want. But in the picture, it says "Ethernet WAN port" but the text says: "The Apple wireless device (in this example, a Time Capsule) uses your Ethernet network to communicate with the Internet through the Ethernet LAN port ( <--> )." I don't know which one to use, WAN or LAN - they show WAN but say LAN?
When I set it up as "share an IP address", the AEBS status tells me "double nat" and to change from "shared IP" to "bridge mode". I do that, and everything seems fine - for the wired clients. Now the wireless clients cannot connect, Airport on the MacBook Pro just say "Connection failed" and the MacBook says "Invalid password" (translated from danish), even though I set the Airport Utlity to save the password in keyring, so it should be correct... If I disable wireless encryption, the wireless clients will connect but get a self-assigned IP, and therefor not work (cannot get online)...
It seems the only way I can get wireless to work, is if I set AEBS up as DHCP, but then it won't be on the "same network" as the linksys (192.168.15.1), but rather on 10.0.x.x as I select. If I select 192.168.x.x within AEBS, I'm also getting some error messages, conflict/subnet thing.
Anyway - I really hope somebody knows how to get wireless clients to get an IP address from existing ethernet when connected to the AEBS.
Thanks!!I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?! -
ActiveX Bridge does not work in 1.4.2_04?
I tried my JavaBean with jre 1.4.2_04.
Java Plugin started up at CreateObject("XXX.Bean.1") and popped up an error statement.
Here is the stack trace:
java.lang.UnsatisfiedLinkError: getBrowserProxySettings
at sun.plugin.net.proxy.WIExplorerProxyConfig.getBrowserProxySettings(Native Method)
at sun.plugin.net.proxy.WIExplorerProxyConfig.getBrowserProxyInfo(Unknown Source)
at sun.plugin.net.proxy.PluginProxyManager.reset(Unknown Source)
at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
The JavaBean was packaged with 1.4.2_03, so I repackaged with 1.4.2_04.
But the result was the same.
Does anyone have the same problem?Hi,
we successfully use the AX bridge in jre 1.4.2_04. The stack trace points to a more common problem with the Java Plugin. Did you try to run an applet? Does it work?
java.lang.UnsatisfiedLinkError: getBrowserProxySettings You should take a look at the settings in the Java Plugin configuration panel? (Start -> Settings -> Control Panel -> Java Plugin) -
Batch rename in Adobe CC Bridge does not work. Is there any fix for this problem?
Hi,
I'm using Adobe CC Bridge to batch rename a folder of RAW files. Version 6.0.1.6. I've got the latest Mac Pro running Maverick. I set up the parameters in the Batch Rename tool, but when I hit Rename, nothing happens. Is there anything I can do to fix this problem? Is anyone else experiencing this? Adobe can you fix this bug?I am experiencing this same (or related) bug with using the batch rename inside of Bridge CC (Mac OS X 10.9.5).
First I filter out a subset of a folder of images that I want to batch-rename, then on the 12 or so thumbs I selected, I invoke the "batch-rename" dialog box... it presents its usual options, which work the first time. Subsequent attempts fail.
I close the search filter, I re-type my filter, I close the bridge window, re-open the bridge window, etc. to no avail.
It's interesting to note at this point, the program won't quit; it has to be force-quit. -
JDBC Async-Sync bridge does not work
Hi folks.
I read the how to guide How To Realize a sync-async and async-sync bridge within the Adapter Framework and I found some tips at SDN (i.e File - RFC - File without a BPM - Possible from SP 19.) . So on, I created a scenario JDBC<=>SOAP.
My scenario:
1 JDBC adapter sends an async request to SOAP
2 SOAP creates an object in its system and then sends a sync confirmation response to the sender (async JDBC adapter Receiver)
Module Tab of JDBC Sender
Processing Sequence
AF_Modules/RequestResponseBean 1
CallSapAdapter 2
AF_Modules/ResponseOnewayBean 3
Module Configuration
1 passThrough true
3 adapterNamespace http://sap.com/xi/XI/System
3 adapterType JDBC
3 receiverChannel JDBC_Object_Receiver
3 receiverService Legacy_Service
The problem is the scenario works fine until an error is detected on communication channel (Receiver). Any kind of error, as communication problem, insert/update problem or procedure types problem. When this thing happens, communication channel (Sender) posts the next message and a persist error appears, like that
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:Stack>Message ID XXXX for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
After this, all the next messages remain at "Processing started".
This persist error message becomes constant in the system. It is executed once an hour approximately.
I have already tried solving this problem deleting the adapter and recreated it again, but the behavior remains the same.
This is the SOAP Header Main
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Inbound Message
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>6F5A54B3-96DF-C744-8BF6-A4D4B9289C5D</SAP:MessageId>
<SAP:RefToMessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:RefToMessageId>
<SAP:TimeSent>2007-03-23T14:31:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service />
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>VUC</SAP:Service>
<SAP:Interface namespace="http://oesp0115/xi/webservices">Cliente_THOR_OB</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://oesp0115/xi/webservices">Cliente_THOR_OB</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:P1>F6BC6270D94A11DBB6D000188B40F2CF</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID F6BC6270D94A11DBB6D000188B40F2CF for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-03-23T14:31:30Z" wasRead="false">
<SAP:Engine type="AE">af.xid.oesp0115</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-03-23T14:31:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.oesp0115</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070323</SAP:Date>
<SAP:Time>113130</SAP:Time>
<SAP:Host>oesp0115</SAP:Host>
<SAP:SystemId>XID</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:Logging>1</SAP:Logging>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId />
<SAP:PipelineService />
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="001">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>1304</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>3744</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>1304</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterOutbound>AENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>14</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>56A2F666C66538F48BCD76B50034F91C</SAP:Sender_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="oesp0115">20070323143130.699</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.87</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!--
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!--
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!--
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XID</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-23T14:31:30Z BRAZIL</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE">
<Trace level="1" type="T">Message-GUID = F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!--
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST">
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="T">SystemError message generated. Guid: 6F5A54B396DFC7448BF6A4D4B9289C5D</Trace>
<Trace level="1" type="T">Error during execution of message : F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
-->
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into MAST</Trace>
</Trace>
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Someone can help me?
Regards
RafaelHey Rafael,
I've heard of ur problem by Carol Garcia.
I still think the problem was related to the fact that you were commiting the work at JDBC adapter, even though your DB (it was Oracle, right?) supports internal commit. I do aggree that this scenario should work for non-commiting DBs, though. Thus it is a bug, and the note is relevant.
Anyway, did you try to commit the work at DB side? I think it should have resolved your case (even though the bug would still exist, but it would not impact you).
Regards,
Henrique. -
Help, my Bridge does not works well with my AfterEffect. does not preview .ffx files
Hi,
I have some problem with my Bridge. When i browse preset from my After Effect in Bridge, it won't preview all of the After Effect preset(*.ffx), but my Bridge works well with photoshop files, it will preview all the photo files inculding .PSD. Does anyone knows what's the problem? Anyone knows how to fix it? I need help to fix this problem to get my work in AfterEffect, it is very hard to get things work it won't preview the preset. Thanks.
Best Regrads,
ChongkkmyFound this link, does it address your problem?
http://forums.adobe.com/click.jspa?searchID=769246&objectType=2&objectID=1794899 -
Custom weblogic instrumentation does not work for me :(
Hello.
First of all excuse me about my english.
I have developed a simple class, I have compile it, and I have packaged it into a war file.
The application Works ok when I do a request: http://192.168.1.5:7100/simple/hello
But when I want to instrumentalize it, it cannot works. I have enabled instrumentation, but it I don't see anything in: Request Performance.
Can you help me?.
These are the files:
simple_temp3
|
+- hello.html
|
+- WEB-INF
+- web.xml
|
+- META-INF
+- weblogic-diagnostics.xml
|
+- classes
+- edu
+- ucla
+- hello.class
[weblogic@localhost simple_temp3]$ cat hello.html
<html>
<head><title>Hello World</title></head>
<body><h1>Hello World</h1></body>
</html>
[weblogic@localhost simple_temp3]$ cat META-INF/weblogic-diagnostics.xml
<wldf-resource xmlns="http://www.bea.com/ns/weblogic/90/diagnostics"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/diagnostics.xsd">
<name>Sample WLDF resource</name>
<instrumentation>
<enabled>true</enabled>
<wldf-instrumentation-monitor>
<name>sample</name>
<enabled>true</enabled>
<action>TraceElapsedTimeAction</action>
<location-type>around</location-type>
</wldf-instrumentation-monitor>
</instrumentation>
</wldf-resource>
[weblogic@localhost simple_temp3]$ cat WEB-INF/web.xml
<web-app id="simple" version="2.4">
<welcome-file-list>
<welcome-file>hello.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>Hello</servlet-name>
<servlet-class>Hello</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Hello</servlet-name>
<url-pattern>/hello</url-pattern>
</servlet-mapping>
</web-app>
[weblogic@localhost simple_temp3]$ cat WEB-INF/classes/edu/ucla/Hello.java (this is the source Class)
import javax.servlet.Servlet;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import java.io.IOException;
import java.io.PrintWriter;
public class Hello extends HttpServlet implements Servlet {
public Hello() {}
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<HEAD><TITLE>Hello World</TITLE></HEAD>");
out.println("<BODY>");
out.println("<H1>Hello World</H1>");
out.println("Today is: " + (new java.util.Date().toString()) );
out.println("</BODY></HTML>");
out.close();Can anyone help me?
-
Bridge does not work in newly installed Photoshop CS6
Having installed a recently purchased copy of Photoshop CS6, I have not been able to use the bridge function. The earlier copy of Photoshop CS5 functioned correctly. The current operating system is Windows 8.1.
All help options, so far investigated, have referred to Creative Cloud, but I only have Photoshop CS6 and do no intend to use Creative Cloud.
Help would be much appreciated.When Bridge is active and I try to open a picture in Photoshop, there is no link to the program. The picture, if it is made visible at all, appears in a basic computer graphics system (Windows photo viewer etc.), not Photoshop.
-
Jrockit multicast bug on RHEL4, WLS cluster does not works!
OS and Kernel Version: Linux achilles1 2.6.9-34.0.1.ELsmp #1 SMP Wed May 17 16:59:36 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
We use Bea Weblogic 8.1SP5 with Jrockit JVM 1.4.2 on RHEL3. We upgraded to operating system to RHEL4, and found that the interface binding for multicast communication does not bind to the correct interface, it is always using the default interface. We tried it from a sample program, and found that the error is in the JVM.
This is a critical error for us, because our application server cluster use multicast for cluster communication.
No error msg. It seems like this BUG:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4082533 but it is solved.
List steps to reproduce the problem:
socket = new MulticastSocket(i);
if(s2 != null)
try
InetAddress inetaddress = InetAddress.getByName(s2);
System.out.println("Using interface at " + inetaddress.getHostAddress());
socket.setInterface(inetaddress);
System.out.println(socket.getInterface());
catch(SocketException socketexception)
throw socketexception;
}Helo,
You can reproduce it by this way (we have 6 RHEL4 servers, problem is the same). We tried with programs written in C (mcast,Tibco), multicast perfectly works on all interfaces on all servers. But in Java:
Server:
[wlxapp@webex3]$ uname -a
Linux webex3 2.6.9-34.0.1.ELsmp #1 SMP Wed May 17 17:05:24 EDT 2006 i686 i686 i386 GNU/Linux
Problem - with Bea mukticast tester (or any Java class), using the nondefault webex3-priv interface(eth1):
[wlxapp@webex3]$ java -cp wl9.jar utils.MulticastTest -N webex3_priv -I webex3_priv -A 224.1.1.11 Starting test. Hit any key to abort Using interface at 192.168.1.1 Using multicast address 224.1.1.11:7001 Will send messages under the name webex3_priv every 2 seconds Will print warning every 600 seconds if no messages are received
I (webex3_priv) sent message num 1
I (webex3_priv) sent message num 2
I (webex3_priv) sent message num 3
Did not receive any message.
But if we use the default webex3 interface (eth0)
[wlxapp@webex3]$ java -cp wl9.jar utils.MulticastTest -N webex3 -I webex3 -A 224.1.1.11 Starting test. Hit any key to abort Using interface at 10.4.20.4 Using multicast address 224.1.1.11:7001 Will send messages under the name webex3 every 2 seconds Will print warning every 600 seconds if no messages are received
I (webex3) sent message num 1
I (webex3) sent message num 2 Received message 2 from webex3
I (webex3) sent message num 3 Received message 3 from webex3
Works perfectly.
TCPDUMP:Messages are out from server(other srv also see it), so we have problems probably with receiving them:
[root@webex3]# tcpdump -i eth1
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
11:42:56.647362 IP webex3_priv.idmz.t-mobile.intra.afs3-callback > 224.1.1.111.afs3-callback: rx type 95 (1472)
11:42:56.648168 IP webex3_priv.idmz.t-mobile.intra > 224.1.1.111: udp
11:42:56.648245 IP webex3_priv.idmz.t-mobile.intra > 224.1.1.111: udp
We examined the lsof output, the tester bind to all interfaces, so it should receive the messages:
[wlxapp@webex3]$ /usr/sbin/lsof -p 11127
gij 11127 wlxapp 8u IPv4 150320 UDP *:afs3-callback
We tried the test with Java 1.4.2 and 1.5 (Jrockit and Sun), the results are the same.
You can easily reproduce the problem with an RHEL4 server with 2 network interface.
Our real problem that if multicast have problems, our Weblogic clusters does not works. -
DefaultFileName does not work with apache-webligic bridge in service pack 5
The DefaultFileName directive does not work with apache-webligic bridge
from service pack 5. It used to work with the apache-webligic bridge
from service pack 3. Can anybody tell me why? Thanks.
WeiI also had same issues using iPhone 5. Got chance to speak with senior engineers at NTC and they have confirmed 3G equipment they are using is not yet compatible with 3G band that iPhone 5 uses. So technically speaking, iPhone 5 has a hardware that is a generation ahead and not backward compatible to 3G system NTC currently uses.
On a bright side though, they confirmed that NTC is aware of the situation and is soon upgrading its hardware within next 1 or 2 months which will finally support 3G on iPhone 5. The other operator though already has support for this (don't want to mention their name but you know the alternative).
As for me, I'll be waiting for the (super frustrating) NTC to upgrade their hardware.
BTW - Apple has nothing to do with this issue. -
Apache bridge & Basic Auth does not work
The WebLogic newsgroups are not the appropriate place to file product defect
reports.
I suggest that you file a bug report with our support organization. Be sure
to include a complete test case. They will also need information from
you -- please review our external support procedures:
http://www.beasys.com/support/index.html
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Jaroslav Mechacek <[email protected]> wrote in message
news:[email protected]..
>
I tried mod_wl with apache 1.3.12 ( mod_ssl / openssl ) ,
but the basic auth does not work.
When apache starts it complains that mod_lw uses plain apache api
Tue May 16 17:29:54 2000] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache 1.3 API, this module might crash under EAPI! (please recompile it
with -DEAPI)
When I request protected page, apache returns both
HTTP/1.1 200 OK , HTTP/1.1 401 Unauthorized
what apache / ssl configurations are known to work ?
Escape character is '^]'.
GET /file/index.html HTTP1.0
HTTP/1.1 200 OK
Date: Tue, 16 May 2000 14:47:01 GMT
Server: Apache/1.3.12 (Unix) mod_ssl/2.6.4 OpenSSL/0.9.5a
HTTP/1.1 401 Unauthorized xxx:
www-authenticate: Basic realm="WebLogic Server"
content-length: 23
content-type: text/html
connection: Close
No credentials supplied -
Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work
Been an Iphone owner. really, really wanted to try a good android phone, and the z1 looked the best. However
I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
im annoyed now and cant play with my new phone
4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
some one please helpme before i rant in my blog!Hi Inventsc,
I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
Again, I am sorry it's not working properly for you.
Best Regards,
David -
HELP - BBM does not work on Playbook (Bridged)
Hi Folks,
Looked into other threads but all problems seem to be related to older versions.
I am new to the whole Blackberry Lifestyle.
Currently own, Playbook (wireless) and Torch 9860 for about two weeks - enjoying them independently.
ANY HELP would be appreciated.
Just tried the Bridge function but the BBM does not work.
It is funny cause my Playbook does get a notification for any BBM I receive, the remote works, the contacts can be seen on playbook but when I click on BBM notification it I get a message "Your Version of Blackberry Messenger is not compatible with Blackberry Bridge. Download the latest version of BBM to use it on your playbook.
I did what I normally do - googled it. Found out the specs and I do have all updated apps.
On my 9860 I have
7.1.0 System
Bridge 2.0.0.35
BBM 6.1.0.55
This is not linked to BES or anything - purely personal.
I have already restarted my phone and playbook with no luck.
I am new, so not sure of the difference between stuff like hard set, shutdown etc etc or other technical terms - so would appreciate if you assume that I am a complete dummy.Hi playbookfun and welcome to the BlackBerry Support Community Forums!
Have you tried updating to the latest version of BBM™? If not, I would recommend trying that by going to www.blackbery.com/bbm from your BlackBerry® Browser.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Maybe you are looking for
-
Added photos in web gallery synced back to iPhoto?
when others add photos to my web galleries, i can't find where they are synced back to on my mac. For example, if I publish an event "Beach" and my friend adds a picture taken from her camera to the web gallery, it does not sync back to the original
-
In Lion, can Notes and StickyNotes be shared via iCloud?
Looks like there will be an app "notes" in Mountain Lion that can be shared across all my computers; is there a way to use Notes (iOS5) and StickNotes (Lion) with iCloud to do that now?
-
hai, Actually i am displaying a table in ALV and i am locking key values. Now my reqment is , if i press (NEW, COPY )button then i have to add one new row and that row should be Unlocked to insert values.
-
Why does mail suddenly import thousands of messages again?
Once every few months Mail under 10.6.8 re-imports 2700 or so emails and takes half an hour, but when finished it has not added anything I see in the mail list. Specifically there are no "new" email messages. This has been going on for years. 2010 M
-
Recommend a framework for Flex & CF
Hi, Can people please give a few opinions on learning a framework, which one, why, and hopefully what kind of knowledge one needs before even delving into the recommended (or any) framework...for a Flex 2/Coldfusion MX7.0.2/MS-My-SQL environment. Goo