Apache will not start

Hi All,
Just upgrade to 10.4 Server...
Server Admin will not start Apache. I receive an error to check the error log. I tried starting apache in the terminal, and it looked like it was loading the sites that we host - but no error, just a message. The last two lines are:
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
/usr/sbin/apachectl start: httpd could not be started
When I check Server Admin and look at the error log I receive this:
[Sat Apr 8 01:18:27 2006] [error] mod_ssl: Init: Pass phrase incorrect (OpenSSL library error follows)
[Sat Apr 8 01:18:27 2006] [error] OpenSSL: error:0D094068:asn1 encoding routines:d2iASN1SET:bad tag
[Sat Apr 8 01:18:27 2006] [error] OpenSSL: error:0D0680A8:asn1 encoding routines:ASN1CHECKTLEN:wrong tag
[Sat Apr 8 01:18:27 2006] [error] OpenSSL: error:0D07803A:asn1 encoding routines:ASN1ITEM_EXD2I:nested asn1 error
[Sat Apr 8 01:18:27 2006] [error] OpenSSL: error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
Everything worked fine before the upgrade. Anyone have any insight?
TIA - Vijay

Have you tried resetting the certificate(s) password(s) in Server Admin, if any require them? All your errors are SSL-related. Is it possible that in the upgrade the passphrase for your certificate got garbled?
Also, try reading this article and see if it doesn't help:
http://forums.macosxhints.com/archive/index.php/t-23083.html
If still no luck, although this might yield nothing new, what do you get when you enter "apachectl configtest" and/or "httpd -S" on the command line?

Similar Messages

  • Apache will not start with fastcgi

    We use an acgi called LiveIQue for our website. This plugin requires FastCGI to render the pages. Works fine with 10.3. We've just purchased and installed a new Intel Xserve with 10.4.8, and every I install the FastCGI module, apache will not start. If I comment out the FastCGI, apache starts.
    Anyone else having this problem.?

    I just configured and tested mod_fastcgi and can say it works with apache 1.3.33
    I understand it can also built for apache 2 however I haven't done this yet and I may eventually get to it.
    As well, looking into fastcgi I decided to try and build php as a fastcgi application and install it with lighttpd (with all the bells and whistles) and this also works rather well, speedy for what it does.

  • Apache will not start if ssl is enabled

    Hello,
    I recently upgraded from LMS 3.1 to LMS 3.2.  One of our end users pointed out that I forgot to enable https in the Common Services -> Server -> Security area.
    I re-enabled https and now the 'Ciscoworks Web Server' will not start up.
    If I disable https using ConfigSSL.pl from <NMS root>/MDC/Apache/bin then Ciscoworks comes up fine again.
    The log file in <NMS root>/MDC/Apache/logs/error.log shows the message:
    Failed to configure CA certificate chain!
    I have deleted and regenerated the self-signed certificate several times and this pattern repeats.
    I am running LMS on Windows Server 2003 R2.
    Any suggestions would be appreciated.
    Thanks.

    Joe,
    As requested, here are the files.
    I was able to force Apache to start using the Service control panel.
    However, when I spawned a browser the error message is:
    Forbidden
    You don't have permission to access /cwhp/LiaisonServlet on this server.
    Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
    Don't know what this means either.  Again, if I turn https off, everything comes up fine.
    Thanks.
    Bob

  • WebSharing will not start

    Please help. I am trying to learn server side scripting and managed to load duplicate upon duplicate of MySQL so I have re installed my system 10.4.10 and now the web sharing will not start. Could someone please tell me how to check that Apache is in place. I can't seem to locate any folder at all. I am running a Mac Pro quad. Thanks

    First, you are posting in the Mac OS X Server area whereas I believe your query refers to Mac OS X. If this is the case then you will get a better response by posting to the correct group (you may even find the answer by searching that Discussion group).
    I would first check that permissions are correct and that the Sites folder exists within your home folder. Also check for the existence of \Library\WebServer and two folders within 'CGI-Executables' and 'Documents' - this is also true of the Server version of OS X.
    If you're using Mac OS X Server (you would be using Server Admin to start the Web service), check the log files. On both flavours of the system, you will find them in /var/log/httpd/ and will be names access_log and error_log. If you're not using Mac OS X Server, try using Console within your Utilities folder and browse to the sub folder from the log file list.

  • Personal web sharing will not start up

    my personal web sharing will not start up.
    i tried to start it up at work on my laptop and i got a message that said anther computer on the network was using the same name. since then the personal web sharing can be clicked on but, never starts up.
    anyone have any ideas how i can fix this? i am trying to learn PHP and i need to have it working so i can sync up with apache.

    Try changing your computer's name. To do so go to the Sharing preference pane and change the computer's name to something else. Try restarting web sharing after this...

  • Personal web sharing will not start

    my personal web sharing will not start up.
    i tried to start it up at work on my laptop and i got a message that said anther computer on the network was using the same name. since then the personal web sharing can be clicked on but, never starts up.
    anyone have any ideas how i can fix this? i am trying to learn PHP and i need to have it working so i can sync up with apache.

    my personal web sharing will not start up.
    i tried to start it up at work on my laptop and i got
    a message that said anther computer on the network
    was using the same name. since then the personal web
    sharing can be clicked on but, never starts up.
    anyone have any ideas how i can fix this? i am trying
    to learn PHP and i need to have it working so i can
    sync up with apache.
    The solution to your problem is most likely contained within your question.
    You'll need to locate the machine on your network that has the same name as yours and change its name... or you'll need to rename your computer to something else.

  • Bi_server will not start

    I'm trying to figure out why my bi_server will not start.  It was running fine, but after restarting the server, I can no longer start it and I get the error below:
    b_server1
    FAILED_NOT_RESTARTABLE
    When I try to start the server, I get this long error:
    C:\MW_HOME\user_projects\domains\bifoundation_domain\bin>startManagedWebLogic.cmd bi_server1
    SVR_GRP =
    JAVA Memory arguments: -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics
    WLS Start Mode=Production
    CLASSPATH=C:\MW_HOME\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\MW_HOME\Oracle_BI1\bifoundation\jdbc\jdk16\bijdbc.jar;;C:\MW_HOME\patch_wls1035\profiles\default\sys_manifest_classpath\weblog
    ic_patch.jar;C:\MW_HOME\ORACLE~2\jdk\lib\tools.jar;C:\MW_HOME\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\MW_HOME\WLSERV~1.3\server\lib\weblogic.jar;C:\MW_HOME\modules\features\weblogic.server.modules_10
    .3.5.0.jar;C:\MW_HOME\WLSERV~1.3\server\lib\webservices.jar;C:\MW_HOME\modules\ORGAPA~1.1/lib/ant-all.jar;C:\MW_HOME\modules\NETSFA~1.0_1/lib/ant-contrib.jar;c:\MW_HOME\wlserver_10.3\server\lib\weblog
    ic.jar;c:\MW_HOME\oracle_common\modules\oracle.dms_11.1.1\dms.jar;c:\MW_HOME\oracle_common\modules\oracle.jmx_11.1.1\jmxframework.jar;c:\MW_HOME\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar;c:\M
    W_HOME\oracle_common\modules\oracle.odl_11.1.1\ojdl.jar;C:\MW_HOME\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\MW_HOME\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\MW_HOME\ORACLE~
    1\modules\oracle.jrf_11.1.1\jrf.jar;C:\MW_HOME\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\MW_HOME\WLSERV~1.3\server\lib\xqrl.jar
    PATH=C:\MW_HOME\patch_wls1035\profiles\default\native;C:\MW_HOME\WLSERV~1.3\server\native\win\x64;C:\MW_HOME\WLSERV~1.3\server\bin;C:\MW_HOME\modules\ORGAPA~1.1\bin;C:\MW_HOME\ORACLE~2\jdk\jre\bin;C:\
    MW_HOME\ORACLE~2\jdk\bin;C:\Python33\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\MW_HOME\Oracle_BI1\products\Essbase\EssbaseServer\bin;c:\MW
    _HOME\Oracle_BI1\bin;c:\MW_HOME\Oracle_BI1\opmn\bin;c:\MW_HOME\Oracle_BI1\opmn\lib;c:\MW_HOME\Oracle_BI1\perl\bin;C:\MW_HOME\WLSERV~1.3\server\native\win\x64\oci920_8
    *  To start WebLogic Server, use a username and   *
    *  password assigned to an admin-level user.  For *
    *  server administration, use the WebLogic Server *
    *  console at http:\\hostname:port\console        *
    starting weblogic with Java version:
    java version "1.6.0_29"
    Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
    Java HotSpot(TM) 64-Bit Server VM (build 20.4-b02, mixed mode)
    Starting WLS with line:
    C:\MW_HOME\ORACLE~2\jdk\bin\java -server   -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics -Dweblogic.Name=bi_server1 -Djava.security.policy=C:\MW_HOME\WLSERV~1.3\server\lib\weblogic.p
    olicy  -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore="c:\MW_HOME\wlserver_10.3\server\lib\cacerts"   -da -Dplatform.home=C:\MW_HOME\WLSERV~1.3 -Dwls.home=C:\MW_HOME\W
    LSERV~1.3\server -Dweblogic.home=C:\MW_HOME\WLSERV~1.3\server  -Dcommon.components.home=C:\MW_HOME\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14L
    ogger -Ddomain.home=c:\MW_HOME\USER_P~1\domains\BIFOUN~1 -Djrockit.optfile=C:\MW_HOME\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=c:\MW_HOME\USER_P~1\domains\BIFO
    UN~1\config\FMWCON~1\servers\bi_server1 -Doracle.domain.config.dir=c:\MW_HOME\USER_P~1\domains\BIFOUN~1\config\FMWCON~1  -Digf.arisidbeans.carmlloc=c:\MW_HOME\USER_P~1\domains\BIFOUN~1\config\FMWCON~1
    \carml  -Digf.arisidstack.home=c:\MW_HOME\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=c:\MW_HOME\USER_P~1\domains\BIFOUN~1\config\fmwconfig\jps-config.xml -Do
    racle.deployed.app.dir=c:\MW_HOME\USER_P~1\domains\BIFOUN~1\servers\bi_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\MW_HOME\ORACLE~1\modules\oracle.ossoiap_1
    1.1.1,C:\MW_HOME\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol  -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=C:\MW_HOME\Oracle_BI1 -DEPM_ORACL
    E_HOME=C:\MW_HOME\Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=C:\MW_HOME\Oracle_BI1 -DHYPERION_HOME=C:\MW_HOME\Oracle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=C:\MW_HOME\O
    racle_BI1 -DEPM_REG_PROPERTIES_PATH=c:\MW_HOME\USER_P~1\domains\BIFOUN~1\config\fmwconfig -Depm.useApplicationContextId=false -Doracle.biee.search.bisearchproperties=C:\MW_HOME\Oracle_BI1\bifoundation
    \jee\BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dwe
    blogic.security.SSL.enableJSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.servic
    es.BISearchServiceConfiguration -Dxdo.server.config.dir=c:\MW_HOME\user_projects\domains\bifoundation_domain\config\bipublisher -DXDO_FONT_DIR=C:\MW_HOME\Oracle_BI1\common\fonts  -Drtd.instanceName=RT
    D_bi_server1 -Dem.oracle.home=C:\MW_HOME\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://LET-SP-FRONTEND:7001  -Dwlw.iterativeDev=false
    -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\MW_HOME\patch_wls1035\profiles\default\sysext_manifest_classpath  weblogic.Server
    <Nov 21, 2013 3:21:17 PM EST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allo
    wCryptoJDefaultJCEVerification=true>
    <Nov 21, 2013 3:21:17 PM EST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.securit
    y.allowCryptoJDefaultPRNG=true>
    <Nov 21, 2013 3:21:18 PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.4-b02 from Sun Microsystems Inc.>
    java.io.IOException: java.io.IOException: java.io.FileNotFoundException: C:\MW_HOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bootstrap\cwallet.sso (Access is denied)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(FileInputStream.java:120)
            at weblogic.utils.FileUtils.copy(FileUtils.java:261)
            at weblogic.utils.FileUtils.copy(FileUtils.java:240)
            at weblogic.utils.FileUtils.copy(FileUtils.java:181)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.copyFileToConfigBakDir(ConfigBackupRecoveryManager.java:134)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:103)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.copyFileToConfigBakDir(ConfigBackupRecoveryManager.java:142)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:103)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:106)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
    <Nov 21, 2013 3:21:35 PM EST> <Error> <Management> <BEA-141196> <The managed server could not update the configuration files during the registration with the deployment service. The update failed due
    to an exception:
    weblogic.management.DeploymentException: Exception occured while downloading files
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:83)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
    Caused By: java.io.IOException: java.io.IOException: java.io.FileNotFoundException: C:\MW_HOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bootstrap\cwallet.sso (Access is denied)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(FileInputStream.java:120)
            at weblogic.utils.FileUtils.copy(FileUtils.java:261)
            at weblogic.utils.FileUtils.copy(FileUtils.java:240)
            at weblogic.utils.FileUtils.copy(FileUtils.java:181)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.copyFileToConfigBakDir(ConfigBackupRecoveryManager.java:134)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:103)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.copyFileToConfigBakDir(ConfigBackupRecoveryManager.java:142)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:103)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:106)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
    >
    <Nov 21, 2013 3:21:35 PM EST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.management.DeploymentException: Exception occured while downloading files
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:83)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
    Caused by: java.io.IOException: java.io.IOException: java.io.FileNotFoundException: C:\MW_HOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bootstrap\cwallet.sso (Access is denied)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(FileInputStream.java:120)
            at weblogic.utils.FileUtils.copy(FileUtils.java:261)
            at weblogic.utils.FileUtils.copy(FileUtils.java:240)
            at weblogic.utils.FileUtils.copy(FileUtils.java:181)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.copyFileToConfigBakDir(ConfigBackupRecoveryManager.java:134)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:103)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.copyFileToConfigBakDir(ConfigBackupRecoveryManager.java:142)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:103)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
            at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.downloadFiles(RuntimeAccessDeploymentReceiverService.java:920)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateFiles(RuntimeAccessDeploymentReceiverService.java:879)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.handleRegistrationResponse(RuntimeAccessDeploymentReceiverService.java:728)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.registerHandler(RuntimeAccessDeploymentReceiverService.java:699)
            at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.start(RuntimeAccessDeploymentReceiverService.java:169)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.saveFileToConfigBakDir(ConfigBackupRecoveryManager.java:106)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigBackupRecoveryManager.handleBackup(ConfigBackupRecoveryManager.java:48)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.handleBackup(ConfigDataUpdate.java:443)
            at weblogic.deploy.internal.targetserver.datamanagement.ConfigDataUpdate.doDownload(ConfigDataUpdate.java:79)
            ... 13 more
    >
    <Nov 21, 2013 3:21:35 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Nov 21, 2013 3:21:35 PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Nov 21, 2013 3:21:35 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    C:\MW_HOME\user_projects\domains\bifoundation_domain\bin>

    Ok, now the bi_server1 is starting, but now other services fail:
    Message
    OPMN.queryProcessStatus failed with the following exception
    Supplemental Detail
    oracle.as.management.opmn.optic.OpticBadConnectException: Could not get secure socket for host SERVER-FRONTEND.sys.com and port 9501

  • Win2000 Oracle8.1.7 HTTPService will not start

    hi,
    i have a clean win2000 professional Oracle8.1.7 install, yet the ApacheHTTPServer will not start, it fails with a
    "Error 1067 - process terminated unexpectedly"
    i've gone thru Meta-Link for ideas, no avail.
    **********steps taken thus far:
    oracle_apache.conf - commented out "include" for mod_ose
    trace files, c:\oracle\ora8i\apache\apache\logs\error.log
    file does not exist: c:\oracle\ora8i\apache\apache\htdocs\portal30
    1. does listener need to be configured for mod_ose -
    2. how is win2000 Oracle8iHTTP Server configured to start!
    3. IIS is not running
    thanks,
    Eric

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Eric Schmidt ([email protected]):
    hi,
    i have a clean win2000 professional Oracle8.1.7 install, yet the ApacheHTTPServer will not start, it fails with a
    "Error 1067 - process terminated unexpectedly"
    i've gone thru Meta-Link for ideas, no avail.
    **********steps taken thus far:
    oracle_apache.conf - commented out "include" for mod_ose
    trace files, c:\oracle\ora8i\apache\apache\logs\error.log
    file does not exist: c:\oracle\ora8i\apache\apache\htdocs\portal30
    1. does listener need to be configured for mod_ose -
    2. how is win2000 Oracle8iHTTP Server configured to start!
    3. IIS is not running
    thanks,
    Eric<HR></BLOCKQUOTE>
    **** thanks for commenting
    it's working now, i commented out the mod_plsql.conf include statement in the oracle_apache.conf file to start the OracleHTTPServer

  • System PI 7.11 will not start because of R3INLPGM error

    Dear experts,
    our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
    On the source node the PI system starts without any problems. If we switch over to the target node,
    the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
    ran under QUSRWRK.
    In the pool files from SAPSTART we found the following errors:
    QPRINT:
    R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
    QPJOBLOG:
    *NONE      Information                 XXXXXXX  SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                         From module . . . . . . . . :   O4TMKLIBIX                                                                               
    From procedure  . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    To module . . . . . . . . . :   O4TMKLIBIX                                                                               
    To procedure  . . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether              
                                         R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority         
    But the authority from all libs and objects are same as on the source machine.
    Any idea?
    Best regards,
    Matthias

    Hello Matthias,
    Please log on as QSECOFR (or a user with SECOFR authority),
    ADDLIBLE SAPXIP71
    and run command
    FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
    Best regards,
    B. Wolf

  • My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Settings (and other Apps) Will Not Start (Metro)

    This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
    http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
    This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
    It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
    Here's the details from the System event log:
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          19-Jun-2014 09:21:53
    Event ID:      10001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          SARSYS9\Michael Sargent
    Computer:      SarSys9
    Description:
    Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
    "15612"
    Happened while starting this command:
    "C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
        <EventRecordID>546613</EventRecordID>
        <Correlation />
        <Execution ProcessID="972" ThreadID="4068" />
        <Channel>System</Channel>
        <Computer>SarSys9</Computer>
        <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
      </System>
      <EventData>
        <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param2">15612</Data>
        <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param4">Unavailable</Data>
        <Data Name="param5">Unavailable</Data>
      </EventData>
    </Event>
    That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
    I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
    Thanks,
        Mike

    Please post questions and problems about using Windows in the Windows forums on
    http://answers.microsoft.com
    The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
    --Rob

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • HP TouchSmart application will not start

    We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
    HP TouchSmart Calendar has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
    Reminder clock elapsed event is successfully fired.
    CheckReminder() is executed successfully.
    ShowReminder() is executed successfully.
    After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
    Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
    I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
    If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
    On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
    Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
    Cheers,
    G

    Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

  • Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

    Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

    Create a new profile as a test to check if your current profile is causing the problems.
    See Basic Troubleshooting: Make a new profile:
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Oracle 10G Non-Network install - OEM will not start when on the LAN.

    Greetings,
    Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
    Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
    In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
    The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
    ===========================================================
    IP_address hostname.domainname hostname
    where:
    IP_address is the non-routable IP address you entered for the loopback adapter.
    hostname is the name of the computer.
    domainname is the name of the domain.
    For example:
    10.10.10.10 mycomputer.mydomain.com mycomputer
    ==========================================================
    In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    192.168.110.250 IBM-6AB1330E158
    ==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
    IP_address hostname.domainname
    - not -
    IP_address hostname.domainname hostname
    Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
    Thanks in Advance for any help,
    ADG13

    I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
    And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
    fwiw,
    ADG13
    C:\Documents and Settings\Administrator>ipconfig/all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : IBM-6AB1330E158
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : ibm.com
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Loopback Adapter
    Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.110.250
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
    Physical Address. . . . . . . . . : 00-11-25-13-96-AF
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.102
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 65.24.7.3
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
    Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
    Ethernet adapter AGN Virtual Network Adapter:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . : AGN Virtual Network Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-01
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 9.49.217.159
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . :
    DHCP Server . . . . . . . . . . . : 9.49.217.159
    DNS Servers . . . . . . . . . . . : 9.0.2.1
    9.0.3.1
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
    Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Maybe you are looking for

  • Reagrding SAP GUI in Linux

    HI friends please help me on the below issue. when i logon to my SAP XI GUI and when i click on the transaction code sxmb_ifr, then my default browser is not opening automatically. My O/S is linux.and i already installed java web start also.please se

  • Issue with setting float point in Textfield

    hi i have an issue with float input in a textfield. what i want to do is. when the user start typing numerics it should accept from right hand side and keep appending value from right hand side. for ex if i want to enter 123.45 user starts entering 1

  • IDVD opened and shut down

    I clicked iDVD to open and it s opening and shut down again and again. Any solution for that? Jerome

  • Closed PO's T-Code or Report

    Dear, I need to have a report of all PO that's already been closed. Can you please give a good T-Code for showing list of all Closed PO. Regards, Ibou

  • Screen share on Macs

    I'm trying to help someone use screen share on a Mac. We're running Breeze 5.1. I tried it and was unsuccessful. Does the screen share function work on only specific versions of IE? Or specific versions of the Mac OS?