Apache wont run on local host 80

Im trying to install xampp and run apache for a php class im taking and it says that it cant gain access to port 80?
From what I can find Visual basic is holding it up>

Actually phisical location of server is not important at all. Client and server can work on one machine or on different - it doesn't matter: any way communication goes over the network, even inside of one box. So for your case just install server and client on one machine.Nothing more.

Similar Messages

Is there a way to run using local host ip (127.0.0.1)?

I am trying to get a working system at home. Obviously I cannot use a dialup
dynamic IP address, but is there a way to enable iAS 6.0 SP3 to use the
local host address of 127.0.0.1?
kas.exe complains 'value of admin host in registry is invalid (localhost IP
is not acceptable)'. I am running Windows 2000 and I do have a network card
that I sporadically use to connect a laptop. It appears that with Windows
2000, I can not use my Ethernet cards PI address unless I actually have it
connected to a network.
Any assistance would be appreciated.
Thanks,
Bret Hansen

Yes. Use the loopback adapter.
Bret Hansen wrote:
I am trying to get a working system at home. Obviously I cannot use a dialup
dynamic IP address, but is there a way to enable iAS 6.0 SP3 to use the
local host address of 127.0.0.1?

How to run local host web application in win 7 64 bit with oracle database?

Hi all,
Hope doing well,
sir i am running my local host web application with oracle database in win 7 32 bit. it's working fine.
but when i am running the same thing in win 7 64 bit. it's showing login error.
not going to home page even i checked with this published file open in visual studio it's working fine.
how to run it correctly?
thanks in advance.

The number of times you have been asked to post sufficient details for your questions, we would expect you to have got the message by now... but clearly not.
952646 wrote:
but when i am running the same thing in win 7 64 bit. it's showing login error.What error? You haven't posted an error. There are millions of possible errors in computing and you're expecting people to guess which one.
not going to home page even i checked with this published file open in visual studio it's working fine.
how to run it correctly?No code, no database version, no details...... = NO HELP.
When are you going to learn.

Cicsco asa clarification regarding show local host

Hi Team,
we are observing the no. of conn thru asa 5580 is getting increased and one a fine day it will stop sending/receiving traffics.
firewall# show conn count
1900000 in use, 2000008 most used
As per the datasheet of this asa, the max conns permissible is 2 million (20 lacs). and the output shows that currently 1900000 connections are there and 2million+8 connections are most used.
when i run " show local-host | include host|count/limit ", below are the outputs showing for max connections..
local host: <172.x.x.x>,
    TCP flow count/limit = 35857/unlimited
    TCP embryonic count to host = 25
    UDP flow count/limit = 0/unlimited
local host: <DC01>,
    TCP flow count/limit = 306/unlimited
    TCP embryonic count to host = 8
    UDP flow count/limit = 736807/unlimited
local host: <DC02>,
    TCP flow count/limit = 246/unlimited
    TCP embryonic count to host = 2
    UDP flow count/limit = 582010/unlimited
local host: <172.y.y.y>,
    TCP flow count/limit = 1/unlimited
    TCP embryonic count to host = 0
    UDP flow count/limit = 308412/unlimited
These are the top 4 connections, i wonder should we consider only the tcp flow count or udp as well ??

Hi,
I have had to deal with a similiar problem only 2-3 times. And it was always a "contaminated" computer/server.
In the latest case a single server in an environment with ASA5540 was pushing so many connections that it reached the maximum connections for that ASA model (400 000)
First I would start checking what connections are beeing formed from the host that you listed above. I guess you should usually see some sort of well known port used for any service thats needed. Might also help if there was someone there that knows exactly what connections your servers etc. are supposed to handle.
How many hosts are there in your network?
What has been the normal trend with the connection count before you ran into this problem?
How did you notice this problem? Connections werent being formed through the ASA?
What have you done so far regarding this problem?
- Jouni

Integrating Apache & 9iAS which are running on different hosts.

Hi,
Need to integrate apache_1.3.24 & Oracle 9iAS which are running in different hosts.
I feel, to integrate I need to do more than just adding the proxy entries.
Any help appreciated to sort this issue.
Shafeen

Hi,
Need to integrate apache_1.3.24 & Oracle 9iAS which are running in different hosts.
I feel, to integrate I need to do more than just adding the proxy entries.
Any help appreciated to sort this issue.
Shafeen Hi there.
What kind of integration do you need? If you want to mirror a 9iAS URL on the Apache you can use the ProxyPass directive, eg (please check the documentation):
ProxyPass /local/url/ http://remote/url/
HTH.
Finn

Problems running asp pages on windows 7 IIS local host

Hi,
I've just put DW CS5 onto my new Windows 7 machine, and am having problems trying to run asp pages on the IIS local host. With DWmx and windows XP I had no problems, but with the new DW and the new operating system - W7 - it's impossible!
I fill in the all the basics, and am able to set up a remote local site in the wwwroot folder under a new file I have created called "websites". However I keep getting an error 401.3 Unauthorized message in IE9 when trying to view the site I'm working on locally.
It suggests that I check the ACLs for the file that is being requested, which I have done and have given all the files full permissions - but I still get the same message.
I'm going to a trade fair where I can't connect the interet, so I have to find a way of showing my site on my local machine.
Has anyone had this problem with the new version of IIS for W7 and asp pages - and can anyone help? I'm desperate!!
Cheers,
Seb

Hi Mooreski,
No, I don't have Skype - but I did what you suggested, and now I get the following:
I have given all the files in the IIS folder - including the website folder all the permissions necessary, but I still get this!
This is the IIS app and what I have set up...
Am I doing the right thing here?
I will set up a skype account - and contact you
Cheers,
Seb

How to set up a JSP local host server?

I am trying to set up a local host JSP server, do you know any good youtube or tutorials in general that would help me set up a local host JSP server? Or could you post the steps here and your source (if any).
I am looking for something similar to XAMPP as in this youtube tutorial: http://ca.youtube.com/watch?v=KWRB-maTVyM&feature=rec-fresh However, any help would be greatly appreciated.
By the way, I am very new to JSP and was wondering, XAMPP includes Apache, is Apache a JSP server?
-Direction needed.
Edited by: watwatacrazy on Aug 31, 2008 6:51 AM

You need a Java web container to run JSP/Servlets. A commonly used one is Apache Tomcat. It is not the same as Apache HTTP Server which can only serve static files.
You can find Tomcat here: [http://tomcat.apache.org].
How to install/use it, just check the User Guide: [http://tomcat.apache.org/tomcat-6.0-doc/index.html].

Cisco ASA 5505 Cannot ping local traffic and local hosts cannot get out

I have, what I believe to be, a simple issue - I must be missing something.
Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209).
There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off.
The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue.
Basically, the VPN is up and running but PC 10.51.253.210 cannot get out.
Any ideas? Sanitized Config is below. Thanks !
ASA Version 7.2(4)
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif Inside
security-level 100
ip address 10.51.253.209 255.255.255.248
interface Vlan2
nameif Outside
security-level 0
ip address ***** 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
ftp mode passive
dns server-group DefaultDNS
domain-name *****
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
pager lines 24
mtu Outside 1500
mtu Inside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
no asdm history enable
arp timeout 14400
global (Outside) 1 interface
nat (Inside) 0 access-list No_NAT
route Outside 0.0.0.0 0.0.0.0 ***** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set DPS_Set esp-3des esp-md5-hmac
crypto map DPS_Map 10 match address Outside_VPN
crypto map DPS_Map 10 set peer *****
crypto map DPS_Map 10 set transform-set *****
crypto map DPS_Map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
console timeout 0
management-access Inside
username test password P4ttSyrm33SV8TYp encrypted
tunnel-group ***** type ipsec-l2l
tunnel-group ***** ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8d0adca63eab6c6c738cc4ab432f609d
: end
1500

Hi Martin,
Which way you are trying. Sending traffic via site to site is not working or traffic which you generate to outside world is not working?
But you say ASA connected interface to PC itself is not pinging that is strange. But try setting up the specific rules for the outgoing connection and check. Instead of not having any ACL.
If it is outside world the you may need to check on the NAT rules which is not correct.
If it is site to site then you may need to check few other things.
Please do rate for the helpful posts.
By
Karthik

Error on invoking a webservice by giving ip address instead of local host

Hi,
I created a web service through jdeveloper and tried accessing the webservice generated WSDl file by giving ip address of my machine , but it throws me an error stating IE cannot display the web page . The same web service is running fine when giving local host on the Web service URL .
Looking frwd fr sme help
Thanks in advance
Ragaven

Hi,
your WebLogic server is not setup to listen for the IP address. You can change this in the WLS console for the server configuration. Note that when you install WLS and don't define any hostname then it will listen to all addresses (which also is the default for the integrated WLS)
Frank

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

Premiere Elements 12 wont run on my laptop

Hi,
I have a new laptop and I've just installed Premiere Elements 12 but it wont run. When I create a new project I see the following message and as you can see there are no clues to what causing the issue. Organiser works fine.
I've run a windows update, installed the latest graphic and sound drivers, I've reloaded but nothing works.
OS Name
Microsoft Windows 7 Enterprise
Version
6.1.7601 Service Pack 1 Build 7601
System Type
x64-based PC
Processor
Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM)
8.00 GB
Total Physical Memory
7.90 GB
Available Physical Memory
4.45 GB
Total Virtual Memory
15.8 GB
Available Virtual Memory
10.6 GB
Page File Space
7.90 GB
Page File
C:\pagefile.sys
[Sound Device]
Item
Value
Name
IDT High Definition Audio CODEC
Manufacturer
IDT
Status
OK
Driver
c:\windows\system32\drivers\stwrt64.sys (6.10.6499.0, 539.00 KB (551,936 bytes), 09/07/2014 13:41)
[Display]
Name
Intel(R) HD Graphics Family
PNP Device ID
PCI\VEN_8086&DEV_0A16&SUBSYS_198F103C&REV_0B\3&E89B380&0&10
Adapter Type
Intel(R) HD Graphics Family, Intel Corporation compatible
Adapter Description
Intel(R) HD Graphics Family
Adapter RAM
(2,080,374,784) bytes
Installed Drivers
igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Driver Version
10.18.10.3540
I have got local Admin rights and more free hard disk space that I know what to do with.
Thanks for any help you can offer.

Spurringirl
Before we go off the deep edge here, perhaps some clarification.
What is the brand/model/settings for the Canon camera that you are using?
I think that Hunt may be being jumping ahead here. Let me explain....
For example, the Canon SX1 lS generates files with the file name starting with MVI_XXXX.mov. These are AVCHD.mov files 1920 x 1080p30 and have no problems in Premiere Elements 12.
So, I would ask "In your case, is your MVI the file extension or the beginning of the file name?"
Thanks.
ATR

Do i need a network card to install and run a local java web server

Friends,
Do i need a network card in my computer to install and run a local Java Web Server or any Web Server.

network cards are only for connecting equipment together... you can set up a webserver without any more equipment than you have already! Indeed Tomcat... BUT you would be better off with apache for production stuff. It depends what you need to serve... if its mainly static pages (i guess it probably isn't) then apache will be enough by itself; but if you need to serve dynamic pages (JSP, Servlet blah blah) then you will need tomcat. Tomcat has it's own webserver and its perfectly ok for testing or low-load stuff, but you can integrate with Apache (a moderately compex task, but do-able, see tomcat-user forum off of apache site) for greater stability, and you don't have to show the port in the URL... Don't set up a webserver on any pc that contains stuff you don't want hacked into... it becomes very succeptible when the service is up...

RemoteException LOCALHOST is non-local host

Hello RMI gurus,
I am trying to run an example RMI application to get a better understanding of how RMI works, but I have encountered this problem. The error I am getting is this:
Error: RemoteException occured in server thread; nested exception is:
java.rmi.AccessException: Registry.Registry.rebind disallowed;
origin
LOCALHOST/127.0.0.1 is non-local host
I have the rmiregistry running on the default port on the same system that I am trying to run the server part of the program, and am using Java 1.3. Here is how I start the program:
java -Djava.rmi.server.codebase=file:///java/verify/ -cp /java/verify FibonacciServerAlso, I bind my object to rmi with this call in the FibonacciServer class:
Naming.bind("fibonacci", f);
I am guessing it is choking on this.
Any way...thanks in advance for any help with this!
C.M.

Naming.bind("fibonacci", f);
Naming.bind("//localhost/fibonacci",f);You can add rmi: in front of localhost but it is not essential.

Maverick Local Host Not Working Correctly

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Azure In Role Caching Doesn't start on server with "Not running in a hosted service or the Development Fabric."

I started to use Azure in-role caching and everything works great in Azure compute emulator on my local machine, but not on server. I've already dealed with some problems, like lack of msshrtmi.dll on server, but now can't understand why get this error:
Not running in a hosted service or the Development Fabric.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: Not running in a hosted service or the Development Fabric.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[InvalidOperationException: Not running in a hosted service or the Development Fabric.]
Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitor.GetDefaultStartupInfoForCurrentRoleInstance() +535
Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener..ctor() +34
[ConfigurationErrorsException: Could not create Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, Microsoft.WindowsAzure.Diagnostics, Version=2.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.]
System.Diagnostics.TraceUtils.GetRuntimeObject(String className, Type baseType, String initializeData) +1588
System.Diagnostics.TypedElement.BaseGetRuntimeObject() +103
System.Diagnostics.ListenerElement.GetRuntimeObject() +825
System.Diagnostics.ListenerElementsCollection.GetRuntimeObject() +261
System.Diagnostics.TraceInternal.get_Listeners() +256
System.Diagnostics.Trace.get_Listeners() +79
Microsoft.ApplicationServer.Caching.DataCacheServerLogManager..cctor() +97
[TypeInitializationException: The type initializer for 'Microsoft.ApplicationServer.Caching.DataCacheServerLogManager' threw an exception.]
Microsoft.ApplicationServer.Caching.DataCacheServerLogManager.ChangeLogLevel(TraceLevel traceLevel) +0
Microsoft.ApplicationServer.Caching.ServiceConfigurationManager..cctor() +24
[TypeInitializationException: The type initializer for 'Microsoft.ApplicationServer.Caching.ServiceConfigurationManager' threw an exception.]
Microsoft.ApplicationServer.Caching.ServiceConfigurationManager.GetHostDefaults() +0
Microsoft.ApplicationServer.Caching.OMCacheNodeProperties..ctor(IHostConfiguration props, Int32 maxNC, Boolean perfCounterRequired) +69
Microsoft.ApplicationServer.Caching.LocalCacheStore..ctor(EvictionParametrs evictionParams) +50
Microsoft.ApplicationServer.Caching.DataCacheFactory..ctor(DataCacheFactoryConfiguration configuration) +555
Microsoft.Web.DistributedCache.DataCacheFactoryWrapper.CreateDataCacheFactoryFromConfiguration(DataCacheFactoryConfiguration config) +35
Microsoft.Web.DistributedCache.CacheHelpers.RunCacheCreationHooks(CacheConnectingEventArgs fetchingEventArgs, IDataCacheFactory dataCacheFactory, Object sender, EventHandler`1 fetchingHandler, EventHandler`1 fetchedHandler) +7
All I found about this error is that it occurs if you start local Azure compute emulator with in-role caching and without administrative rights. But in emulator everything works fine and problem occurs only after I publish to staging environment. (if switch
to production, error remains).
I use cache for resolving routes like /username and /countryname etc. So available usernames and country names will be cached and updated on changes in database. I have static class with static DataCache object which is created on first request to cache. But
even home page doesn't start so error occurs before I try to create cache object.

Hi Jambor, I don't have reference errors. I had them before but already fixed with copy local = true for few references.
I receive error only on azure host service. In local everything works great, app starts, cache works and I can see data in cache. Yes, in local mode cloud project is set as startup and VS runs as administrator.
I've added TraceListener creating code you suggested:
protected void Application_Start(object sender, EventArgs e)
System.Diagnostics.Trace.Listeners.Add(new Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener());
and error code changed a little. But as I see problem is the same but caused when creating TraceListener from Application_Start instead of when initalizing cache:
Not running in a hosted service or the Development Fabric.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: Not running in a hosted service or the Development Fabric.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[InvalidOperationException: Not running in a hosted service or the Development Fabric.]
Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitor.GetDefaultStartupInfoForCurrentRoleInstance() +518
Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener..ctor() +34
[ConfigurationErrorsException: Could not create Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, Microsoft.WindowsAzure.Diagnostics, Version=2.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.]
System.Diagnostics.TraceUtils.GetRuntimeObject(String className, Type baseType, String initializeData) +1588
System.Diagnostics.TypedElement.BaseGetRuntimeObject() +103
System.Diagnostics.ListenerElement.GetRuntimeObject() +825
System.Diagnostics.ListenerElementsCollection.GetRuntimeObject() +261
System.Diagnostics.TraceInternal.get_Listeners() +256
System.Diagnostics.Trace.get_Listeners() +79
sub2o.MvcApplication.Application_Start() +497
[HttpException (0x80004005): Could not create Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, Microsoft.WindowsAzure.Diagnostics, Version=2.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.]
System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app) +558
System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +179
System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +322
System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +384
System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +397
[HttpException (0x80004005): Could not create Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, Microsoft.WindowsAzure.Diagnostics, Version=2.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +630
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +763

Apache wont run on local host 80

Similar Messages

Maybe you are looking for