APACHE2 SERVER IN MAITEANCE MODE
Hi
I installed solaris 10 with apache2 server in My ULtra 10 workstation
but It is not starting when I tried to enable service I found below message
STATE STIME FMRI
maintenance 16:07:19 svc:/network/http:apache2
pl. guide me how can I start my apache server i normal mode
Satish
You posted the same question, two days in a row, into the same forum.
http://forum.java.sun.com/thread.jspa?threadID=5265816
You already have responses in the first post.
Continue with that one.
Adding new posts accomplishes nothing.
Edit:
... on further examination, you tend to post multiple times for everything, don't you?
http://forum.java.sun.com/profile.jspa?userID=1001645
Similar Messages
-
Starting Weblogic Server in Development Mode
Hello,
How can I start a managed server in development mode? I set STARTMODE=false in
the StartManagedServer.cmd. However, this did not work. Any ideas? Thanks in
advance.收到,谢谢!
内容不错 -
Starting SOA Suite server in debug mode
Hello,
anyone knows how to start soa suite server on debug mode?
it basically oc4j server started from opmn. is there anyway i can pass the "-ojvm -XXdebug,port4000,detached,quiet" to opmn?
Rudisolved..!!!
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/sysprops.htm#CHDCFADJ -
Starting Server in Debug Mode - Need Some Advice Plz.
Hi Guys,
I have an EP SP 12 Server Running and I am trying to Start the Server in Debug mode from the Netweaver Developer Studio but when I right click the Server and try to choose Debug, the option is greyed out and even while viewing the Debug option from the SAPMMC I see that under the column Debug, it say 'Disabled' for the Server and Dispatcher.
Can anyone suggest how this can be done, I would appreciate any help as I have been working on this for some time.
Best Wishes,
John.
Message was edited by: John Bray
Message was edited by: John BrayHi John,
If the you cannot start the server in the debugging mode through the NWDS then you can try the other way round.
<b>Through Config Tool:</b>
You can enable the debuggine mode from the Config Tool as well. Just visit the following path :
<b>C:\usr\sap\<SID>\JC<SYS_NO>\j2ee\configtool\configtool.bat</b>
Click on the your instance. Then under the tab VM Environment, Set the <b>DebugMode = true</b>.
Restart the engine now. This will open the J2EE server again in the Debug Mode.
I hope this helps you!!
Regards
Pravesh
PS: Please conside rewarding points if helpful and solved. -
How to Connect to ftp server in active mode using the finder
How can I can I use the finder command "connect to server" to connect to a ftp server using the active Mode. With Cyberduck I can connect to this server only in active mode. Apparently the connect to server command uses the ftp passive mode.
Or is it an other way to mount on the desktop a ftp server in active mode?
Thank youPassive mode can be disabled in your network settings, but I have a feeling what you're actually asking for is the ability to upload, and the answer to that is the Finder can't do it. There are some filesystem plugins out there that provide this functionality, but they cost money.
-
Download DMS attachment into an application server in background mode?
Is it possible to download DMS attachment into an application server in background mode?
Currently I am using the following code but does not work in background mode
CALL FUNCTION 'CVAPI_DOC_GETDETAIL'
EXPORTING
pf_dokar = 'Z06'
pf_doknr = gs_drad-doknr
pf_dokvr = gs_drad-dokvr
pf_doktl = gs_drad-doktl
pf_read_kpro = 'X'
TABLES
pt_files = lt_file
EXCEPTIONS
not_found = 1
no_auth = 2
error = 3
OTHERS = 4.
*Copy Attachment from DMS to PC File
CALL FUNCTION 'CVAPI_DOC_VIEW'
EXPORTING
pf_dokar = 'Z06'
pf_doknr = gs_drad-doknr
pf_dokvr = gs_drad-dokvr
pf_doktl = gs_drad-doktl
pf_appl_start = ' '
pf_apptp = '1'
pf_filename = 'C:\TEMP\ZLINK.BMP'
ps_file = ls_file
IMPORTING
pfx_file = l_pfx_file
EXCEPTIONS
OTHERS = 0.
*Load BMP into SE78
PERFORM import_bitmap_bds
IN PROGRAM saplstxbitmaps
USING l_filename "Local File for Upload/Download
l_bmpnam "Name
'GRAPHICS' "Application Object
'BMAP' "ID
'BCOL' "Color
'BMP' "Extension
'ZLINK PICTURE' "Title
space "Resides in Printer Memory in Print Request
'X' "Reserve Height of Graphic Automatically
space "Graphic Storage: Compressed Bitmaps
CHANGING l_docid
l_wf_res. "Graphic Resolution
ThanksHi!
You didn't find answer for this, because it is not possible. If you run your program in background, it is running on the server, and does not have any connection to your local machine. That's why you can't upload/download in background mode.
You might try to address somehow your local PC, with its IP or MAC address, but I don't think does this task worth so much time.
Run your program in online mode, or if you want to run it in background, then upload your file into the SAP server.
Regards
Tamá -
FTP Server in FXP mode : PASV / Illegal PORT Command
Hello,
In our workflow, we transfer the media files with the FTP protocol in mode FXP (server to server), the commands are initiated by an automation system.
This system work with the plateforms windows (serv-u), linux (vsftpd), osx (tnftpd) but it's impossible on a osx server (xftpd). The aim is to write file on our Xsan.
The error is an illegal PORT command, when the automation system sent the IP adress of the other server.
For test, If the IP adress of the destination server is the same that the automation server, the transfers are good, the PORT command is accepted.
But in our case, the ip adress, is a other server...
We can't to run the ftp server in FXP mode, and I do not want to install a Pureftp for to replace the tools included with osx server (and server admin).
I think that's is possible, because this workflow works on a osx after we have modify the ftpd.conf (checkportcmd off).
We not found in the file ftp access and nothing on the Internet, that's why I write on this board.
I need your help, anyone have a solution, it's really important ?
Thank you very much.
FranckHello Franck,
I'm attempting the same thing. Did you find a solution to your problem? -
Anyone Familiar linking Apache2 Server to Tomcat 5.5?
I am trying to have Apache2 work with Tomcat 5.5, but am having no success.
There's about 10,000 documents out on the web that all contradict each other and I have no clue how to do this correctly.
Here's what I have and what I am trying to do...
OS: WindowsXP
Apache Server: 2.0.53 installed set to port 8181
Located in: D:\Program Files\Apache Group\Apache2
Tomcat Server: 5.5.7 installed set to port 8080
Located in D:\Program Files\Apache Software Foundation\Tomcat 5.5
mod_jk.so (Version 1.2.8) installed into
Located in: D:\Program Files\Apache Group\Apache2\modules
Both Apache2 and Tomcat are installed correctly which I verified by running separately
When I click the following link, I want Tomcat to pick up the request using the Apache2 Server
http://localhost:8181/somePath1/somePath2/ok, I solved it. A couple of points to note:
- I switched so port 80 was apache2 and port 8080 was tomcat
- If using Windows do not use mod_jk.so instead use mod_jk.dll. Either way, place the file in the Apache2\modules directory
- If your http.conf directory names have spaces make sure to put them in quotes.
- If you have errors do not check the 'error' log in the Event Viewer as it gives you useless information. Instead check the 'application' logs in the Event Viewer
Here is my tomcat/conf/workers.properties
worker.list=ajp13
worker.ajp13.port=8009
worker.ajp13.host=localhost
worker.ajp13.type=ajp13Here is my additions to the apache2\conf\httpd.conf
# Setup for Tomcat
# Load mod_jk module
# Update this path to match your modules location
LoadModule jk_module modules/mod_jk.dll
# Declare the module for <IfModule directive>
# AddModule mod_jk.c
# Where to find workers.properties
# Update this path to match your conf directory location (put workers.properties next to httpd.conf)
JkWorkersFile "D:/Program Files/Apache Software Foundation/Tomcat 5.5/conf/workers.properties"
# Where to put jk logs
# Update this path to match your logs directory location (put mod_jk.log next to access_log)
JkLogFile "D:/Program Files/Apache Software Foundation/Tomcat 5.5/logs/mod_jk.log"
# Set the jk log level [debug/error/info]
JkLogLevel info
# Select the log format
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
# JkOptions indicate to send SSL KEY SIZE,
JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories
# JkRequestLogFormat set the request format
JkRequestLogFormat "%w %V %T"
# Send everything for context /examples to worker named worker1 (ajp13)
JkMount /somepath1/somepath2/* ajp13 -
How to start server in debug mode by default
Hi,
Whenever the server starts it does not start in debug mode.
One has to manually start the "SDM" and "Server0" in the debug mode.
Is there a way I can make the server start in debug mode for the first time itself.
regards,
SaurabhHi Saurabh,
You can start the server in debug mode using config tool. Just open cofig tool (/usr/sap/<SYS ID>/JC<SYS NR>/j2ee/configtool/configtool.bat).
Click on the your instance. Then under the tab Servers Debug check Debuggable and also Enable Debug mode.
Restart the engine now.
However a word of caution: Starting the server in debug mode decreases the system performance. You should only start the dev server in debug mode.
Hope this helps.
Regards
Sidharth -
How to put a remote portlets server in maintenance mode
Hi,
We are running Plumtree Portal 5.0.4 on Windows 2000 Server SP4. We have a remote portlets server which hosts a lot of portlets' webservices.
We need to put the remote server in maintenance mode.
How can we disable all webservices hosted by this remote server without disabling each webservices manually (which will be painful) ?
Regards,
Qué Son PHAM VANI don't want to encourage you to modify your database directly, but it seems to be the only way to do this easily. Try:
update ptwebservices
set enabled = 0, disabledmsg = 'This portlet has been disabled. Blah blah blah.'
where gadgetserverid = 200;
Replace 200 with the ID of your remote server.
HTH,
Chris Bucchere | bdg | [email protected] | http://www.bdg-online.com -
Run admin server in production mode
hi there,
we sometimes suffer from the problem that applications which are deployed by
copying to the applications dir on a server running in development mode are
deployed to the admin server as well, which of course does not make any sense
as we have 2 managed servers running for exactly this.
why does this happen? can it be prevented by running the admin
server in development mode?
any opinions,
thanks
frankHi,
<b><font color=maroon>Step1). </font></b> Please DELETE the "data" directory from the following Location: "user_projects\domains\mydomain\AdminServer\"
<b><font color=maroon>Step2). </font></b> Now Create "boot.properties" file inside "user_projects\domains\mydomain\AdminServer\security" directory
<b><font color=maroon>Step3). </font></b> Provide cleartext username & password in "boot.properties" file.
<b><font color=maroon>Step4). </font></b> Restart your Server.
Note: Step1). is most important in your Case.... It must be followed.
Sometimes we face this kind of issue if you have provided a Wrong format in your "boot.properties" file there should be NO Special Charachers (UTF or Invisible sharacters) Or NO Space in your "boot.properties" file ...except below two Lines:
username=MyAdminUserName
password=MyAdminPassword
Please edit this File very carefully....better use Noteopad kind of Simple Editors.
Use *"ls" (Unix command)* or *"dir" Windows Command* to Make Sure that the File Extension is "boot.properties" only...and not "boot.properties.txt" or something else.
Note: There should be No Heading Or Trailing SPACE character in these two Lines.
Thanks
Jay SenSharma
http://weblogic-wonders.com/weblogic (WebLogic Wonders Are Here) -
Starting WLS 10.3.5 Managed Server in MSI mode
(1) The first time you start the managed server in MSI, should the Admin Server be in Running Mode?
Or
(2) The Managed Server can be started in MSI mode (first time) with out having Admin Server in RUNNING MODE.
Which is true?
I think (1) is correct as the managed server directory wont be available under <DOMAIN_HOME>/Servers directory until you start the Managed Server. So only once you start the Managed Server, then only you can copy the config folder under Managed Server to start it in MSI mode (Having ADMIIN SERVER in SHUTDOWN state).
Is that correct?
So you can never ever start the Managed Server in MSI mode for the first time (with out having Admin Server in RUNNING MODE) after you create the managed server.
Is that correct?
Edited by: user734247 on Apr 18, 2012 2:58 PMYour understanding is right.
The first time you are trying to start a managed server, you need admin server in RUNNING state.
From the next time onwards you can start managed server in MSI mode.
Although, as a workaround you can probably create certain files and directories to try and start managed server in MSI mode the first time itself:
1. Ensure that the entire domain directory is present in the machine where managed server is started.
2. Create directory <DOMAIN_HOME>/Servers/<ManagedServerName>/security
3. Create boot.properties file in <DOMAIN_HOME>/Servers/<ManagedServerName>/security/boot.properties with username and password
4. Create config-msi.xml copying from the config.xml in config directory
This list is not exclusive, it might need some more additional files.
You will have to create additional files like startServer.properties etc if we use node manager to start a managed server in MSI mode.
ORACLE strongly recommends to start the managed server through admin server the first time.
Arun -
Start weblogic server in debug mode through command prompt
Hi,
Please help me in starting the weblogic server in debug mode through command prompt.I am using weblogic 10.3.6 app server.
ThanksHi,
To debug weblogic startup issues you can pass the below jvm arguments:
-Dweblogic.slc=true
-Dweblogic.debug.DebugServerLifeCycle=true
Debug options are available in weblogic based on the subsystem, such as security, jms, jdbc, deployment..etc
You can refer to :
https://blogs.oracle.com/vijaya/entry/weblogic_web_service_debug_flags
Thanks,
Sharmela -
Starting the server in Japanese mode after deployment in english mode.
Hi,
I have a problem
We are developing some system for Japanese clients.
Now problem is that we need to deploy all on their server which shows every hting
in Japanese. Its going to be really very difficult for us.
Is there any key or property in weblogic server by changing that we can change
the language (english-->japanese)
Actually what I wanted was first to run the server in English mode. deploy each
and every thing sucessfuly.
Then stop the server.
Change that flag or whatever to use japanese character set.
Start the server again so that it run in japanese language and having every thing
already deployed.
Is it possible approach?
Any other suggestions are also most welcome.
Thanks and Regards
PavitraHi,
You would have to use the below command to give the root directory to start the server in MSI mode
-Dweblogic.RootDirectory=path
Example:
java -Dweblogic.RootDirectory=c:\MyServerRootDirectory weblogic.ServerTo get more information on this you can check the below link
Topic: Starting a Managed Server in MSI Mode
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1058998
Regards,
Ravish Mody -
How to start SOA server in Debug mode and what kind of errors or issues going to face.
What is the use to start SOA server in Debug mode.Try this.
http://docs.oracle.com/cd/B31017_01/web.1013/b28950/sysprops.htm
Thanks,
Vijay
Maybe you are looking for
-
Key clicks no longer operating after iOS 4.2.1 Update
After updating my iPAD to iOS 4.2.1 the audible key click feature no longer works - even though I have it turned on in the Settings panel. Resetting the iPAD did not change this.
-
How to lock the phone without pressing power butto...
I am using Nokia Asha 500, Nokia Asha Software Platform 1.1.1. My question is there any way to lock the without pressing power button. This function can be added in the drop-down menu(The menu when we swipe down from the status bar). Is it possible
-
FCP 7 - XML - FCP X, audio missing in transfer?
Using 7toX for Final Cut Pro ... two issues: 1. I export and XML from FCP 7. I use 7toX to convert it and import it into FCP X. Does a great job. But I notice that 'some' of the clips on a given timeline (project) are missing their audio. If I '
-
Hi, I have a couple of problems when trying to use OHJ in a (I think) basic fashion. I initialise the hlep with: Help help = new Help(true, true, true); helpManager = new CSHManager(help); URL helpsetLoc = ClassLoader.getSystemResource("help.hs"); Bo
-
Urgent !!!! Data pre-filling in dropdown
Hii, I have created an offline scenario where a drop down list in interactice form is pre-filled using CAF service.when i run the service independenly it works fine returns me 6 rows. But when the data is mapped to the dropdown list of interactive