Apahce 2.2 show 404 after installing webgate

All,
I installed a Apache 2.2 on a Linux 64 server. After installation, when I tried to access http://<host-name>:8080/ I saw a page which says "It Works!" which means my Apache 2.2 is working fine. Then I installed Apache WebGate (using the installer Oracle_Access_Manager10_1_4_2_4_linux64_APACHE22_WebGate). Now if I try to access http://<host-name>:8080/, I see the following error with "404 Not Found" as browser title;
<h1>Not Found</h1>
<p>The requested URL / was not found on this server.</p>
Can you please say me what is the reason for this error? If I comment the WebGate lines in httpd.conf file, Apache works fine.
<b>Apache Version :</b>
[user@host-name ~]$ /u01/apache22/bin/httpd -v
Server version: Apache/2.2.14 (Unix)
Server built: Jun 17 2010 11:02:44
[user@host-name ~]$
<b>Content of np1014_wg.txt</b>
Product: Oracle Access Manager
Component: WebGate
Platform: linux64
WebServer: APACHE22
Locale: en-us
Release: 10.1.4.2.4 CC1.0
Date: 08/10/09
Rajesh

Hi Rajesh,
In the WebGate (AccessGate) definition in the OAM Access System Console, do you have Deny On Not Protected set?
If it's not that, do you get the same results if you specify the full path of the default web server page in the browser url, eg s http://<host-name>:8080/index.html ?
Regards,
Colin

Similar Messages

  • "LD_ASSUME_KERNEL not set to 2.4.19" after installed WebGate,  httpd server

    Hi
    after installed WebGate on Linux RH4 , I cant start httpd server , I show "LD_ASSUME_KERNEL not set to 2.4.19" in error.log.
    I tryed "export LD_ASSUME_KERNEL=2.4.19" after and before setuped webgate. bu I have the same problem.
    thenks Onur.
    Edited by: onur.yuksel on Sep 26, 2008 12:22 AM

    hi
    I have solved this problem with bellow solution.
    The variable LD_ASSUME_KERNEL needs to be set to 2.4.19 in the beginning of  startup script usually located at /etc/init.d/httpd.
    Here is sample statement that needs to be added in httpd startup script file.
    *==========================*
    LD_ASSUME_KERNEL=2.4.19
    export LD_ASSUME_KERNEL
    I have started webgate 'service httpd start' or 'apachectl start &'.
    apachectl status&
    command
    " The requested URL /server-status was not found on this server.
    Apache/2.0.52 (Red Hat) Server at [1]oraclewg.iski.local Port 80
    References
    *_appered error but explorer page,_*
    *__"The requested URL /portal/page/portal/iskiintranet_new was not found on this server."__*
    *_How can configure httpd.conf for webgate ?_*
    *_thanks_*
    Edited by: onur.yuksel on Oct 5, 2008 11:57 PM
    Edited by: onur.yuksel on Oct 5, 2008 11:58 PM
    Edited by: onur.yuksel on Oct 5, 2008 11:59 PM

  • Only showing wallpaper after installing Leopard

    After installing leopard, I log in and I see my hard drive and applications for about 5 seconds and then everything disappears. I hooked it up to another Mac with firewire and checked to see if ApplicationEnhancer.bundle was there and it isn't. The other login on my computer works. Please help!

    So, you're implying that the other account is not an admin account, but not saying. Then, I'm unsure if this will work. Anyway, log into the good, nonadmin account, select System Preferences->Accounts->click on the lock, enter the admin username/password combo if an authentication window pops up. If that works, then create a new admin user account with a unique username/password combo, click on the lock, and log out and into the new account. If that works, report back.

  • Apex 4.2 developer page not showing up after installing over 10g

    Hi there,
    So as luck would have it my Win XP OS crashed. Yes, its the office laptop and I cannot upgrade the OS for now. Anyhow, I got the whole machine re-imaged and installed 10g which had version 2.1 and everything was okay. I was earlier running apex 4.1.1. I could not find that setup on the oracle site so I downloaded apex 4.2 and ran the installation as per page
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/upgrade-apex-for-xe-154969.html
    Everything went through properly except for step
    5. Log back into SQL*Plus (as above) and load images:
    SQL> @apxldimg.sql APEX_HOME
    [Note: APEX_HOME is the directory you specified when unzipping the file. For example, with Windows 'C:\'.]
    where it asked me to enter the directory and I entered C:\
    This is what happened
    SQL> @apxldimg.sql
    PL/SQL procedure successfully completed.
    Enter value for 1: C:\
    old 1: create directory APEX_IMAGES as '&1/apex/images'
    new 1: create directory APEX_IMAGES as 'C:\/apex/images'
    Directory created.
    ^C
    C:\apex>
    I see a backslash and forward slash so I did a ctrl c . When I tried running the command again - @apxldimg.sql
    it just would open the .sql file.
    Not sure if this is the issue, but anyhow, after this, when I tried the "go to database page. It just shows a blank page. Any idea what needs to be done. I was happy with 4.1.1. Is that available anywhere? Maybe I can remove XE and do a fresh install with that.
    Please advise.
    thanks,
    Ryan

    Jeff,
    I had a question on that. I am installing the software on my local machine. I have my apex files under C:\apex
    Now when it asks for images directory, what should I enter,
    C:
    C:\
    C:\apex
    Reason being that as per the upgrade instructions it was given as 'C:\'
    when I gave C:\ the new path showed up as C:\/apex/images.
    also, do we need to give the directory in single quotes?
    thanks,
    Ryan

  • CC Desktop app doesn't show up after install

    I recently reinstalled the OS on my computer (Win7, 64 bit) and now I'm having problems getting CC back up and running. I've downloaded CreativeCloudSet-up.exe and run through the install process, but CC never shows up on my desktop, and I can't find it anywhere in my start menu. Checking the PDApp.log file I see a single error:
    Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    If I try to reinstall I get a message saying: "Installer failed to initialize."
    I've tried renaming the OOBE folder and going through the entire process again, but get the exact same results.
    CC works fine on my laptop, and it used to work fine on this computer (prior to me reinstalling the OS), so not sure what the problem is. I have an urgent project I'm trying to work on, so any help would be appreciated.
    Thanks!

    UPDATE: After some additional searching I came across the Adobe Creative Cloud Cleaner Tool, which fixed my install problem. Everything seems to be working as expected now.

  • Login window doesn't show up after installing

    So I downloaded all the updated released yesterday, including 10.5.2 combo update, Leopard Graphics Update 1.0 & iLifeSupport 8.2. Then I installed them all, restarted my Mac just fine. However, after I installed Application Enhancer & logged out, the login window couldn't show up ever since.
    Then I tried the following solutions:
    1 startup in single-user mode, fully mounted the boot volume, removed /Library/Application Enhancers & /Library/Preferences/Application Enhancer.prefPane ; then I tried to reboot, login window didn't show up.
    2 startup in single-user mode again, fully mounted the boot volume, used the following command:
    mv /Library/StartupItems StartupItemsOld
    mv /Library/Preferences/SystemConfiguration/preferences.plist preferenceOld
    mv /Library/Preferences/loginwindow.plist loginwindowOld
    mv /Library/Preferences/DirectoryService DirectoryServiceOld
    rebooted again, login window still doesn't show up.
    So if anyone could help me out, Thank you very very much!
    also, I found two strange files in the root directory: mach_kernel, mach_kernel.ctfsys. What are this two files for?

    Sounds like you need to run the repair disk routine on the installation disk's version of Disk Utility. Failing that, you could try going into single user mode on startup. Restart the Mac while holding both CMD & S. When you see the code screen and prompt >, type *fsck -fy* (note the space after the k) then hit return. Hopefully things get repaired. Once complete type reboot and hit return

  • Rotate movie feature not showing up after installing quick time pro key

    I installed Quick Time 7 Player for Windows and then entered my Quick Time 7 Pro registration code. When I open a movie, recorded on a Sony Cyber Shot camera, movie editing features are not showing up. I need to rotate my movies 90 degrees and that was the sole purpose of purchasing the pro addition.
    After reading through pages of on-line support resourses and endless calls for technical support (and receiving none), I am still unable to figure out what's going on. Any ideas? Thank you for your help and insights in advance.

    Sounds like you are trying to edit muxed mpeg files, the editing of which QT PRO does not support. It also will not export the sound from such files. If they are mpeg-1 you can use Mpeg StreamClip to edit or export them. If they are mpeg-2 you would first need to buy the mpeg2playbackcomponent. With that component installed mpegstreamclip will also edit mpeg2 files.
    Message was edited by: Dick Napoli

  • Optical drive not showing up after installing SSD HD on satellite L75-B7150

    I just installed an ssd drive in my satellite L75-B7150. I had to unscrew the locking screw on the optical drive and slide it out. Now it wont show up in this PC windows 8.1. it does have power and the light led comes on a while with a disk in it but then goes out. It seems to be plugged in ok as far as the power.Could it be a driver problem? there doesn't seem to be any specific drivers for it.The drive probably isn't making contact with the sata connection. Does any one know a trick to putting them in. the optical drive pushes in after the case is snapped together so unsnapping the case wouldn't help me.

    make sure it is selected as the startup disc.    system preferences>startup disc> make sure new hdd is the default startup disc.

  • Startup manager doesnt show up after installing windows partition

    I partitioned my imac and installed Windows.
    After installation of Windows, It no more operates the options key. My computer starts automatically with Windows, and have no choice to switch between operating systems. it is impossible that i have formatted all disc since I am sure that I partitioned 700 gb of space for OSX, and 299 gb for Windows.
    Why is this happening?

    Hi lindaa_07,
    The Startup Manager should show up when depressing the Option key on your keyboard no matter what operating system(s) is installed. One possibility comes to mind - is this an Apple keyboard and is it directly connected to the iMac? Some other keyboards may not function in a way that brings up the startup manager. See this article for reference -
    Mac doesn't start up from disc - Apple Support
    You may also wish to reset your iMac's NVRAM. See how to do this from this article -
    How to Reset NVRAM on your Mac - Apple Support
    Specifically -
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. 
    Turn on your Mac.
    Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
    Hold these keys until the computer restarts and you hear the startup sound for a second time.
    Release the keys.
    After resetting NVRAM, you may need to reconfigure settings for speaker volume, screen resolution, startup disk selection, and time zone information.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • App Store Update keeps showing even after installing

    the app store on my macbook air keeps showing an update for MacBook Air SMC Firmware update 1.8.  it shows 1.66f60 is installed in the system info page. 
    the MacBook air is late 2010 with OS X 10.9 Mavericks.  The update acts like it is installing but, it still shows up in the app store update even after rebooting.
    any help would be appreciated.

    This may or not be related to the OP's post...
    I have an Epson Artison 810, and since Mountain Lion was installed, my iMac (when waking from sleep or rebooting) keeps asking me if I'd like to download an update for this printer.  If I click Yes, I'm taken to the App Store, where, after waiting WAY too long, it tells me my system's up to date, and that no updates are available.

  • TS1424 Apple Mobile device does not show up after installing 10.0.7.21

    Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
    tt2

  • Startup choices not showing up after install of earlier system on second drive

    I run Yosemite on my main hard drive and love it. However, I have Pro Tools 10 and it won't run on the latest OSX 10.10.2 (Yosemite). So I decided to install OSX 10.6.8 on one of 5 internal hard drives on my computer so I could use PT10. So the install was successful, but when I go to my startup disk to select my Yosemite drive to startup with it again, I get no choice to select it. The only choice I get in my Startup Disk selections is the 10.6.8 drive, and the 10.6.8 install disk which is in my DVD drive. All my other drives are visible when I have a window open in 10.6.8, including the Yosemite, but not visible in as a startup choice in the Startup Disk preference.
    The fact I see everything still in a window keeps me from freaking out.
    Can someone tell me how to make my other system drive visible as a choice? I don't know what I've done to make it not visible. I've done this kind of thing plenty of times over the years, using another drive for an earlier system, but this has never happened where the others don't show up as a choice to restart, and I'm a tad  worried.
    Thanks for your help!
    Michael

    Niel,
    Thanks so much for responding. It solved my problem! All is well.
    Two more questions, if you don't mind.
    1) Do I have to do that every time I want to get back to my Yosemite drive from 10.6.8? Can I change that where it shows up all the time?
    2) What do I do to have all the other drive icons show up on the desktop of the 10.6.8 drive? Even the main 10.6.8 drive isn't showing on the desktop. I remember this happening before, but forgot what I did to correct it.
    Again, many thanks!!!!

  • Photoshop app doesn't show up after install

    I installed PS with Creative Cloud app. The app says it is installed on the drive, but I can't find it anywhere. The destination folder is "applications". It doesn't show upo in lounchpad, spotlight or in finder. When I right-click on PSD files it doesn't show up either. I tried to install another language versions but result is the same. Please help.

    PawelCiuraj you should be able to locate a folder titled Adobe Photoshop CC in your Applications folder.  If you are unable to then I would recommend uninstalling Photoshop and reinstalling.  Please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to remove and reinstall the Adobe software titles included with your Creative Cloud membership.

  • Maxtor 1 Touch - Not showing up after install of Snow Leopard

    My maxtor 1 touch external drive, connected via firewire worked fine on my mac running Leopard. Since installing Snow Leopard, it is not detected at all. I have done some research and found that the problem is that I had password protected the drive when I first set it up. The password was properly requested under Leopard. It seems, after discussions with Maxtor (Seagate) that the password protection is not compatable with Snow Leopard. They told me my option is to roll back to Leopard, take off the password, reinstall Snow Leopard. My reluctance to do this is the fact that to roll back to leopard I have to do an Erase & Install. Does anyone know of any other options that might work? Has anyone encountered this problem? Or maybe provide steps that would allow me to roll back to Leopard without doing "Erase and Install" process?

    Really? No Leopard backup to fall back onto while you investigate SL? Bad ju ju that. See these for better practices:
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html

  • Safari yosemite java warning keeps showing even after install

    I can't get rid of the Java warning after upgrading to Yosemite OS on my Mac AIR.
    I have already installed Java and i can verify it online (java.com).
    I already have Java.
    What can i do. I HATE the **** warning. Keeps poping up random.

    Reinstall SE 6 http://support.apple.com/kb/DL1572 and see if that fixes the problem.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Maybe you are looking for

  • Help needed in extracting pipe delimited fields in a CLOB data type

    hi i Had a table with clob field as shown below. CREATE TABLE TRANSACTION_INFO   TRASACTION_ID  CLOB,   LOG_ID  NUMBER Insert into TRANSACTION_INFO    (TRASACTION_ID, LOG_ID) Values    ('354502002020910|000000610214609663||09/27/09 08:02:37|RNEW|DC25

  • Is it possible to insert a picture in a form?

    The person filling out the form would insert a picture in a space provided.... all of which could then be distributed.... Or if I can't do this in a PDF form, how else can it be done? What I'd really like to have (but is probably not doable) is a thu

  • Montly Salary/expanes Distribution project wise

    Hi.. My client in construction business and the concept of project exists here.. my client want that the salary/other montly common expanses should should taken as cost to the project so that the exact project cost can be found. Tomes Edited by: Tome

  • Bug in Procedure testing

    SQL Developer 3.1.0.7 I created a new procedure with a package. Everything compiles ok, no errors. When I try to "run" the procedure, there is no capability to enter paraameters (in my case 2 parameters are needed). I checked this functionality in 1.

  • 32 bit JRE in 64 bit windows.

    Hello, I know its very much basic question... But i am not much clear about it. Can u plz anyone clear me.... Rite now i am using my java application with jre 1.6.0_11 in 32 bit Windows architecture. And now we planned to support *64 bit Windows arch