APD: dump GETWA_NOT_ASSIGNED

When I try to display the data of a query as a source in the Analysis Process Designer (APD) in RSANWB, the dump GETWA_NOT_ASSIGNED occurs in the method CL_RSCRMBW_BAPI=>GET_KYF_DETAILS_BAPI as an error. Could anybody help me? Please give me your thoughts about it.

Hi Tatsiana,
You should check if the note 1408037 would solve the problem.
Best Regards,
Vincent

Similar Messages

Can I catch the error instead of the DUMP GETWA_NOT_ASSIGNED ???

Hi:
I have the following code:
FIELD-SYMBOLS: . is executed i got a dump GETWA_NOT_ASSIGNED.
Can I catch the error instead of the dump ?
Thank you
Silvia

see the following example to avoid DUMP
PARAMETERS: p_file LIKE rlgrap-filename .
DATA: v_file TYPE string.
DATA: BEGIN OF itab OCCURS 0,
      name(23) TYPE c,
      END OF itab.
DATA: errormessage TYPE char50.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename            = v_file
    filetype            = 'ASC'
    has_field_separator = ' '
TABLES
    data_tab            = itab.
RECEIVE RESULTS FROM FUNCTION 'GUI_UPLOAD'
EXCEPTIONS
   file_open_error               = 1
   file_read_error               = 2
   no_batch                      = 3
   gui_refuse_filetransfer       = 4
   invalid_type                  = 5
   no_authority                  = 6
   unknown_error                 = 7
   bad_data_format               = 8
   header_not_allowed            = 9
   separator_not_allowed         = 10
   header_too_long               = 11
   unknown_dp_error              = 12
   access_denied                 = 13
   dp_out_of_memory              = 14
   disk_full                     = 15
   dp_timeout                    = 16
   OTHERS                        = 17 .
break developer.
CASE sy-subrc.
WHEN 0.
    errormessage     = 'Data Loaded'.
WHEN 1.
    errormessage     = 'FILE_OPEN_ERROR'.
WHEN 2.
    errormessage     = 'FILE_READ_ERROR'.
WHEN 3.
    errormessage     = 'NO_BATCH'.
WHEN 4.
    errormessage     = 'GUI_REFUSE_FILETRANSFER'.
WHEN 5.
    errormessage     = 'INVALID_TYPE'.
WHEN 6.
    errormessage     = 'NO_AUTHORITY'.
WHEN 7.
    errormessage     = 'UNKNOWN_ERROR'.
WHEN 8.
    errormessage     = 'BAD_DATA_FORMAT'.
WHEN 9.
    errormessage     = 'HEADER_NOT_ALLOWED'.
WHEN 10.
    errormessage     = 'SEPARATOR_NOT_ALLOWED'.
WHEN 11.
    errormessage     = 'HEADER_TOO_LONG'.
WHEN 12.
    errormessage     = 'UNKNOWN_DP_ERROR'.
WHEN 13.
    errormessage     = 'ACCESS_DENIED'.
WHEN 14.
    errormessage     = 'DP_OUT_OF_MEMORY'.
WHEN 15.
    errormessage     = 'DISK_FULL'.
WHEN 16.
    errormessage     = 'DP_TIMEOUT'.
WHEN 17.
    errormessage     = 'OTHERS'.
ENDCASE.
MESSAGE e000(00) WITH errormessage .

ECCS Flexible upload dump GETWA_NOT_ASSIGNED

Hi gurus!
I'm trying to upload some financial statements for the ECCS module using transaction CXCD (Data monitor). When i double clic the company to upload the data, using the corresponding method, it returns a dump with a GETWA_NOT_ASSIGNED message in program FICUPL90.
In QAS enviroment it works, but in the sandbox enviroment (which is a copy of the QAS).
Does any body know what can i do?

HI
Your issue is relates to below dump
"GETWA_NOT_ASSIGNED" " " "FICUPL90" bzw. "FICUPL_LCL_UPLOAD" "RUN"
then refer the below note.
909439
Regards
Madhu M

OO ALV dump - GETWA_NOT_ASSIGNED

Hello Friends,
I have implemented OO ALV to display data. Two of the fields are WERKS and MATNR. These fields are input enabled. I have not coded any F4 routine, the standard search helps work. I have SAP GUI 720 installed on my laptop and the program runs just fine. But when I try to run it on another machine with GUI 710 the search help function does not work and I get the dump GETWA_NOT_ASSIGNED. I may be wrong but it seems like there is a problem with the GUI version. Where should I check?
Thanks in advance,
Ali

Hi,
This is a field catalog issue. check whether you populated field catalog correctly. check the field names and internal table field names and also check the col_pos is correct or not.
ls_fieldcat-col_pos = '1'.
u might be assigned the col_pos same for some fields,
hope this helps u.,
Thanks & Regards,
Kiran

Getting Dump GETWA_NOT_ASSIGNED, In ALV

Hi Experts,
Once ALV report is generated then when I am downloaing to xls, I am getting dump
GETWA_NOT_ASSIGNED.
Please advice.
Regards,
IFF

Possibly the field catalog and output table is not synch.
Try to create the field catalog automatically (LVC_FIELDCATALOG_MERGE). and not by mannual ( hardcoded)
If you mentioned any coloring in alv , for testing purpose (just comment the coloring part) and try
a®

Dump :GETWA_NOT_ASSIGNED, while using fm REUSE_ALV_GRID_DISPLAY

Hi Experts,
In the report I am using LDB pnp and outputting results with ALV,
I am using the FM REUSE_ALV_GRID_DISPLAY,
And I am getting the dump GETWA_NOT_ASSIGNED.
The dump I am getting when the FM is executed.
Thanks in Advance.
Regards,
IFF

Hi,
i faced the same problem some days ago.
jst cleck your fieldcat.
check fields names passed to fieldcat and should be in ' ' and in capital.
This shd solve your problem
Thanks & regards

Dump "GETWA_NOT_ASSIGNED" while implementing Remodeling

Hello Everyone,
i am trying to add an infoobject 0calweek with constant value using remodeling. while implementing this scenario i encountered with a short dump "GETWA_NOT_ASSIGNED" could anybody suggest any fix to this issue.
Thanks and Regards,
Ajay.D

thanks

Dump GETWA_NOT_ASSIGNED in ALV OO

Hi experts, i have a problem ... i created an ALV OO but when i wanna dowload the ALV's lines the program trigger a DUMP: GETWA_NOT_ASSIGNED in program SAPLKKBL ... i know that it's a clasic DUMP about ALV's ... please i need your help.
Thanks.
David Carballido

Hi Uwe ... i created a structure and called to FM LVC_FIELDCATALOG_MERGE to create my fieldcat and the program trigger the same DUMP.
Errores tiempo ejecucióGETWA_NOT_ASSIGNED
       ocurrido el     23.09.2008 a 17:10:54
>> Dump breve ABAP no almacenado completamente (muy grande)
Field symbol has not yet been assigned.
¿Qué ha sucedido?
The current ABAP/4 program "SAPLKKBL " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
¿Qué puede hacer?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Análisis error
You attempted to access an unassigned field symbol
(data segment 1069).
This error occurs:
- if you address a typed field symbol before it has been set with
ASSIGN or
- if you address a field symbol that has been reset with UNASSIGN
or pointed to a local field that no longer exists, or
- if you address a field symbol that pointed to a line of an internal
table that has now been deleted, or
- if you address a global function interface partameter, even
though the relevant function module is not active,
i.e. it is not in the list of active calls. You can get the list
of active calls from the this short dump.
Notas para corregir errores
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"GETWA_NOT_ASSIGNED"
"SAPLKKBL " or "LKKBLF99 "
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Usuario, transacción....
Client.............. 200
User................ "BCDCARBALLID"
Language key........ "S"
Transaction......... "SEU_INT "
Program............. "SAPLKKBL "
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Info posición de cancelación
The termination occurred in the ABAP/4 program "SAPLKKBL " in
"GEN_FIELD_OUT2".
The main program was "ZFI_RPT_PDB_005 ".
The termination occurred in line 3824
of the source code of program "LKKBLF99 " (when calling the editor 38240).
Detalle código fuente
037940   * Color settings                                             "K_COLCOLOR
037950     if gs_out_flags-sum is initial.
037960       if gs_fc-hotspot = 'X' and gs_out_flags-hotline is initial
037970          and gt_stack-is_layout-no_hotspot is initial.
037980         format hotspot on.
037990       elseif gs_fc-hotspot = 'V'
038000          and gs_out_flags-hotline is initial and not <field> is initial
038010          and gt_stack-is_layout-no_hotspot is initial.
038020         format hotspot on.
038030       endif.
038040       if gs_fc-input = 'X' and
038050          gt_stack-is_layout-no_input is initial and
038060          gs_fc-checkbox is initial.
038070         format input on.
038080         format intensified off.
038090       endif.
038100       if not gs_fc-emphasize is initial and gs_out-info is initial.
038110         perform field_color_normal using gs_fc
038120   *                                      gt_stack-is_layout
038130                                          gs_out-info.
038140       endif.
038150
038160   *   complex logic with internal table for color description
038170       if gs_out_flags-mcoltab = 'X' and gs_out_flags-slave ne 'X' and
038180          gs_out_flags-sum ne 'X'.
038190
038200         perform field_color_complex using <coltab>
038210                                           gs_fc
038220                                           gs_out_flags-inverse.
038230       elseif gs_out_flags-scoltab = 'X' and gs_out_flags-slave = 'X' and
----->          gs_out_flags-sum ne 'X'.
038250
038260   *     perform field_color_complex using <coltab>   " DEL FGS_COLOR
038270         perform field_color_complex using <coltab_slave> " INS FGS_COLOR
038280                                           gs_fc
038290                                           gs_out_flags-inverse.
038300       endif.
038310     endif.
038320
038330   *--- Prüfung Ausgabelänge
038340     clear gs_out-hlplen.
038350   * Edit-Mask
038360     if gs_fc-tech_form = 7.
038370       write <field> to gs_out-hlpchar
038380              using edit mask gs_fc-edit_mask.
038390       gs_out-hlplen = strlen( gs_out-hlpchar ).
038400   * Bei NUMC führende '0' und ' ' nicht berücksichtigen
038410     elseif gs_fc-tech_form = 6.
038420       write <field> to gs_out-hlpchar no-zero left-justified.
038430       if gs_fc-just = 'R'.

Dump GETWA_NOT_ASSIGNED with REUSE_ALV_GRID_DISPLAY

Hi All,
Today I observed that REUSE_ALV_GRID_DISPLAY gives dump GETWA_NOT_ASSIGNED if we pass a blank table for output. These days I am working with ECC6. Earlier when I use to work with ECC5 such thing never happened and ALV get displayed without any row.
Does anyone know is that correct that in ECC6 blank table in REUSE_ALV_GRID_DISPLAY gives dump. If so, any reason why in ECC6 and not in ECC5?
Regards,
Bhaskar

Hi Bhaskar Tripathi ,
I have an example that works in ECC 6 if you want you can compare it with your code.
types: slis_formname(30) type c.
data: i_repid type sy-repid,
      I_CALLBACK_PF_STATUS_SET type slis_formname,
      I_CALLBACK_USER_COMMAND type slis_formname,
      I_CALLBACK_TOP_OF_PAGE type slis_formname,
      lt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      lt_sort      TYPE slis_sortinfo_alv OCCURS 1,
      gt_events    TYPE slis_t_event WITH HEADER LINE,
      lt_out "your table with information",
      ls_layout   TYPE slis_layout_alv.
ls_layout-no_input          = 'X'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-totals_text       = 'Totals'(201).
ls_layout-info_fieldname =      'LINE_COLOR'.
ls_fieldcat-fieldname   = 'MANDT'.
ls_fieldcat-seltext_m   = 'Mandante'.
ls_fieldcat-col_pos     = 0.
ls_fieldcatj-outputlen   = 10.
ls_fieldcat-emphasize   = 'X'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'PSPID'.
ls_fieldcat-seltext_m    = 'Def. de Proyecto'.
ls_fieldcat-col_pos     = 1.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'POST1'.
ls_fieldcat-seltext_m    = 'Descrip. breve'.
ls_fieldcat-col_pos      = 2.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'OBJNR'.
ls_fieldcat-seltext_m    = 'Número de objeto'.
ls_fieldcat-col_pos      = 3.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
**Event
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events[].
*                  EXCEPTIONS
*                    LIST_TYPE_WRONG       = 1
*                    OTHERS                = 2
READ TABLE gt_events WITH KEY name = slis_ev_end_of_list
INTO ls_event.
IF sy-subrc = 0.
    MOVE 'END_OF_PAGE' TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
READ TABLE gt_events WITH KEY name = slis_ev_end_of_list
INTO ls_event.
IF sy-subrc = 0.
    MOVE 'END_OF_LIST' TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = i_repid
     i_callback_pf_status_set          = i_callback_pf_status_set
     i_callback_user_command           = i_callback_user_command
     i_grid_title                      = i_title
     is_layout                         = lt_layout
     it_fieldcat                       = lt_fieldcat
     it_sort                           = lt_sort
*    IS_VARIANT                        =
     it_events                         = lt_events
   TABLES
     t_outtab                          = lt_out
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Best regards.

DUMP GETWA_NOT_ASSIGNED by ASSIGN FS dynamically

I got a DUMP GETWA_NOT_ASSIGNED, which is triggered by the ASSIGN statement. I once raised this problem. The code is as:
data: name3(21) value '(SAPLMBWL)IMSEG-ABLAD'.
assign (name3) to <f>.
here, IMSEG seems to be a interface of some FM. At last time, I was suggested to transfer the name3 to upper case. It works. But in some condition, it will also raise a DUMP. So I am thinking about there should be some other problem.
In the DUMP text, I found this in ERROR analysis:
You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
I checked the loaded program in debug mode, the program SAPLMBWL is not in the loaded list. But the program can run 2 times for the ASSIGN statement, At the first time, it works fine without any problem. But at the 2nd time, it raise the DUMP.
I think it has sth to do with the memory or objects in runtime. Is there any way to check (SAPLMBWL)IMSEG-ABLAD before the ASSIGN statement?
How to check the active calls list mentioned in the ERROR analysis and what can be done for it? Any check?
thanks for help.

I had a similar problem and the SYSTEM_CALLSTACK fm seems to work perfectly. The "TRY ... CATCH ... ENDTRY or CATCH SYSTEM-EXCEPTIONS " option dosen't seem to work because GETWA_NOT_ASSIGNED doesn't seem to be a catchable runtime error.
Here is the code:
    IF komk-vbtyp = 'M'.
      IF ( preisfindungsart = 'A' OR preisfindungsart = 'C' ) AND (
         komk-kappl EQ 'V').
        CALL FUNCTION 'SYSTEM_CALLSTACK'
         IMPORTING
           CALLSTACK          = lt_callstack
           ET_CALLSTACK       = lt_sys_callstack.
        loop at lt_callstack assigning <ls_sys_callstack>
                             where MAINPROGRAM = 'SAPLV60A'
                               and BLOCKTYPE   = 'FUNCTION'.
          "See if this function calls the XVBFS global parameter and field-symbol
          select single * from FUPARAREF into ls_FUPARAREF
                                         where FUNCNAME = <ls_sys_callstack>-BLOCKNAME
                                           and R3STATE   = 'A'      "Active
                                           and PARAMETER = 'XVBFS' "Global parameter / field symbol
                                           and PARAMTYPE = 'T'.     "Table
          if sy-subrc = 0.
            lv_can_add_to_log = abap_true.
            exit.
          endif.
        endloop.
        if lv_can_add_to_log = abap_true.
          PERFORM vbfs_hinzufuegen_allg(saplv60a) USING
                komk-belnr komp-kposn 'ZVSD' 'E' '002'
                lo_rfc_result-tran_id sy-datum sy-uzeit space .
          komp-prsok = space.
        ELSE.
          MESSAGE ID 'ZVSD' TYPE 'E' NUMBER '002' WITH
          lo_rfc_result-tran_id sy-datum sy-uzeit.
        endif.
      endif.
    endif.
Edited by: Jake Taber on Apr 24, 2011 4:34 AM
Edited by: Jake Taber on Apr 24, 2011 4:35 AM

Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0

Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT        0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors         GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
Balaraj

Thanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
"   READ TABLE p_t_mapping ASSIGNING <fs_map>
   WITH KEY target_stepid = 0
            targetsegid   = <fs_posit>-rulesegid
            targetposit   = <fs_posit>-ruleposit
            targetid      = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj

ABAP dump "GETWA_NOT_ASSIGNED" C

HI,
kindly suggest we are getting a abap dump while downloading a file and when i check the error in service market place its shows that we have to apply support packages.can i directly apply support packages by downloading the market or i have to raise a query fro exact support packages to market place.
my version-mssql2005-ecc5-640version.
kindly see the below abap dump.
Runtime Error          GETWA_NOT_ASSIGNED
Date and Time          21.10.2008 11:25:01
ShrtText
Field symbol has not yet been assigned.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKKBL" had to be terminated because one of the
    statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.
Error analysis
You attempted to access an unassigned field symbol
    (data segment 169).
This error may occur for any of the following reasons:
    - You address a typed field symbol before it is set using ASSIGN
    - You address a field symbol that points to a line in an internal table
      that has been deleted
    - You address a field symbol that had previously been reset using
      UNASSIGN, or that pointed to a local field that no longer exists
    - You address a global function interface parameter, even
      though the relevant function module is not active,
      that is it is not in the list of active calls. You can get the list
      of active calls from the this short dump.
How to correct the error
You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
"GETWA_NOT_ASSIGNED" C
    "SAPLKKBL" or "LKKBLF99"
    "GEN_FIELD_OUT2"
If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "TERHSAPTST01"
    Network address.......... "10.129.48.15"
    Operating system......... "Windows NT"
    Release.................. "5.2"
    Hardware type............ "4x Intel 801586"
    Character length......... 16 Bits
    Pointer length........... 32 Bits
    Work process number...... 0
    Short dump setting....... "full"
Database server.......... "TERHSAPTST01"
    Database type............ "MSSQL"
    Database name............ "INQ"
    Database owner........... "inq"
Character set............ "C"
SAP kernel............... "640"
    Created on............... "Mar 21 2007 23:46:50"
    Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version......... "SQL_Server_8.00 "
Patch level.............. "175"
    Patch text............... " "
Supported environment....
    Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version..... "640"
    Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
    Roll..................... 8176
    EM....................... 12542784
    Heap..................... 0
    Page..................... 286720
    MM Used.................. 8264648
    MM Free.................. 95024
    SAP Release.............. "640"
User and Transaction
Client.............. 100
    User................ "CHINNIJ"
    Language key........ "E"
    Transaction......... "ZSDOST "
    Program............. "SAPLKKBL"
    Screen.............. "SAPLKKBL 0500"
    Screen line......... 3
Information on where terminated
    The termination occurred in the ABAP program "SAPLKKBL" in "GEN_FIELD_OUT2".
    The main program was "ZSDSO_ORDER_STATUS ".
The termination occurred in line 3380 of the source code of the (Include)
     program "LKKBLF99"
of the source code of program "LKKBLF99" (when calling the editor 33800).
Source Code Extract
Line SourceCde
3350       else.
3351         assign <fs74> to <field>.
3352         gs_fc = gs_sfc74.
3353       endif.
3354     when 075.
3355       if gs_out_flags-slave ne 'X'.
3356         assign <fm75> to <field>.
3357         gs_fc = gs_mfc75.
3358       else.
3359         assign <fs75> to <field>.
3360         gs_fc = gs_sfc75.
3361       endif.
3362     when 076.
3363       if gs_out_flags-slave ne 'X'.
3364         assign <fm76> to <field>.
3365         gs_fc = gs_mfc76.
3366       else.
3367         assign <fs76> to <field>.
3368         gs_fc = gs_sfc76.
3369       endif.
3370     when 077.
3371       if gs_out_flags-slave ne 'X'.
3372         assign <fm77> to <field>.
3373         gs_fc = gs_mfc77.
3374       else.
3375         assign <fs77> to <field>.
3376         gs_fc = gs_sfc77.
3377       endif.
3378     when 078.
3379       if gs_out_flags-slave ne 'X'.
>>>>>         assign <fm78> to <field>.
3381         gs_fc = gs_mfc78.
3382       else.
3383         assign <fs78> to <field>.
3384         gs_fc = gs_sfc78.
3385       endif.
3386     when 079.
3387       if gs_out_flags-slave ne 'X'.
3388         assign <fm79> to <field>.
3389         gs_fc = gs_mfc79.
3390       else.
3391         assign <fs79> to <field>.
3392         gs_fc = gs_sfc79.
3393       endif.
3394     when 080.
3395       if gs_out_flags-slave ne 'X'.
3396         assign <fm80> to <field>.
3397         gs_fc = gs_mfc80.
3398       else.
3399         assign <fs80> to <field>.
Contents of system fields
Name     Val.
SY-SUBRC 4
SY-INDEX 78
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 1
SY-LINNO 7
SY-COLNO 1002
SY-PFKEY STANDARD
SY-UCOMM %PC
SY-TITLE Order Data ware house
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
16 FORM         SAPLKKBL                            LKKBLF99                             3380
      GEN_FIELD_OUT2
15 FORM         SAPLKKBL                            LKKBLF99                              777
      GEN_LINE_OUT
14 FORM         SAPLKKBL                            LKKBLF98                             1314
      DATA_OUT_SIMPLE
13 FORM         SAPLKKBL                            LKKBLF01                              360
      LIST_OUTPUT_NEW
12 FORM         SAPLKKBL                            LKKBLF01                             6109
      FIRST_LIST_DISPLAY
   11 MODULE (PBO) SAPLKKBL                            LKKBLO01                               11
      LIST_DISPLAY
10 FUNCTION     SAPLKKBL                            LKKBLU01                              419
      K_KKB_LIST_DISPLAY
9 METHOD       CL_GUI_ALV_GRID===============CP    CL_GUI_ALV_GRID===============CM00R   455
      CL_GUI_ALV_GRID=>PRINT_BACKEND
    8 METHOD       CL_GUI_ALV_GRID===============CP    CL_GUI_ALV_GRID===============CM008     3
      CL_GUI_ALV_GRID=>EXPORT_TO_LOCAL_FILE
    7 METHOD       CL_GUI_ALV_GRID===============CP    CL_GUI_ALV_GRID===============CM007   481
      CL_GUI_ALV_GRID=>EXECUTE_FCODE
    6 METHOD       CL_GUI_ALV_GRID===============CP    CL_GUI_ALV_GRID===============CM01E    58
      CL_GUI_ALV_GRID=>SET_FUNCTION_CODE
    5 FORM         SAPLSLVC_FULLSCREEN                 LSLVC_FULLSCREENF01                  1167
      PAI
4 MODULE (PAI) SAPLSLVC_FULLSCREEN                 LSLVC_FULLSCREENI01                     4
      PAI
3 FUNCTION     SAPLSLVC_FULLSCREEN                 LSLVC_FULLSCREENU01                   186
      REUSE_ALV_GRID_DISPLAY
    2 FORM         ZSDSO_ORDER_STATUS                  ZSDSO_ORDER_STATUS                   1305
      DATA_DISPLAY
1 EVENT        ZSDSO_ORDER_STATUS                  ZSDSO_ORDER_STATUS                    632
      START-OF-SELECTION
Chosen variables
Name
Val.
No.      16 Ty.          FORM
Name GEN_FIELD_OUT2
<FS76>
<FIELD>
222
000
000
000
GS_FC
##M#MVGR5                         I_OUT
    0040454532222222222222222222222222454552222222222222222222222222222222222222222222222222222222
    10D0D672500000000000000000000000009FF540000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GS_SFC76
0000222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GFLG_FIELD
2
0
0
0
GS_SFC24
0000222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GS_OUT-FIELD_COLCOUNT
78
4000
E000
GT_INFO_COUNTTAB_OUTTAB
Table[initial]
SY-REPID
SAPLKKBL
5454444422222222222222222222222222222222
    310CBB2C00000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
GS_OUT_FLAGS-SLAVE
2
0
0
0
SPACE
2
0
0
0
<FM77>
222
000
000
000
GS_MFC77
##M#MVGR5                         I_OUT
    0040454532222222222222222222222222454552222222222222222222222222222222222222222222222222222222
    10D0D672500000000000000000000000009FF540000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<FS77>
GS_SFC77
0000222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TC_FIELD_LIST-CX
<initial>
<initial>
<initial>
GT_INFO_FILTER_OUTTAB
Table[initial]
<FM78>
GS_MFC78
##N#ZRELEASE                      I_OUT
    0040554444542222222222222222222222454552222222222222222222222222222222222222222222222222222222
    10E0A25C513500000000000000000000009FF540000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<FS78>
GS_SFC78
0000222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
HEAD
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
G_INFO_POPUP
2
0
0
0
No.      15 Ty.          FORM
Name GEN_LINE_OUT
GT_STACK2-S_SUBTOT_OPTIONS-OFFSET
    0
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLKKBL
5454444422222222222222222222222222222222
    310CBB2C00000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
GS_ACT_GROUP-SUBTOT
2
0
0
0
GS_OUT_FLAGS-SUM
2
0
0
0
EUINFO
                        0000000000000000###
    2222222222222222222222222222222222222222222222200022222222222222222222222223333333333333333000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
GS_OUT_FLAGS-HOTLINE
2
0
0
0
GS_OUT-COL
2
0000
2000
GS_OUT-INT
0
0000
0000
GS_OUT-ROWS
1
0000

Hi,
We got a lot of short dumps with the same error when we upgraded from 46C to ECC6.
They were all for reports that used ALV and in evry case, corrections were needed to the field catalog.
I suggest that you double and triple check the table and field names in your field catalog. ALV is a lot more sensitive in ECC6 (or performs less checks) and it is possible that you're experiencing the same problem in ECC5.
Hope that answers your question
Alex Dixon

EBP PO Dump "GETWA_NOT_ASSIGNED"

Hi,
I have one ESC PO when i am going to approve the order and to see the versions ( Change version with any other version( Active or Historical) PO is going in to Dump saying that
Interpreter Failed
The Internet Transaction Server failed to generate the response for current request.
Please contact the system administrator.
Internal error code: 0x2101
© 1996-2005, SAP AG
Whem i am going to see the dump in the backend ST22 i can see that "GETWA_NOT_ASSIGNED"
The same is happening while approving the PO.
Please suggest what are the setting i need to check. Currently it happening with only one PUrchase order, other purchase orders working fine
Regards,
jairaj Mahaling

Hi Pradeep,
Thanks for suggestion, this error is coming for only this purchase order can you please help me to how i can check is there any customer fields added or not
Regards,
Jai

Short dump GETWA_NOT_ASSIGNED field symbol not been assigned

Hi Gurus,
I am calling a RFC BAPI_PBSRVAPS_CHANGEKEYFIGVAL2 from R/3 sytem to SCM 5.0.
Acutally this FM BAPI_PBSRVAPS_CHANGEKEYFIGVAL2 not available in R/3 system.
So i am using scm destination and calling above FM directly from R/3 but i am getting the short dump
in SCM system as GETWA_NOT_ASSIGNED field symbol not been assigned.
Can you pls check and advise.
Best Regards,
Radhakrishna.

Hi Radhakrishna,
It looks like you have a discrepancy in the planning area with respect to keyfigure. Some thing like the key figure description is not synchronized between live cache and db.
I suggest you log onto your SCM system, run the program /SAPAPO/TS_LCM_CONS_CHECK on your planning area with correct error option.
Please let me know if this works.

Short dump: GETWA_NOT_ASSIGNED

Hello all, We have already checked various posts regarding the same issue. As per the existing forums, some are experiencing the error at cube level, BeX analyzer level. We are facing the below Dump, when we are loading the data from PSA to First level ODS. Dump: The internal session was terminated with the runtime error GETWA_NOT_ASSIGNED (see ST22). Attached the dump as well. Also, we are coming through this short dump only for those flows where we have enhanced the function modules & enhanced the existing flows. (Not sure if it is just a coincidence or is there any issue with the enhancement we have done). Wherever we have developed the new flows, we aren't facing any loading issues. Loading is going fine for the newly staged ODSs. 1) So, is there anything that went wrong with enhancing the FMs? 2) Do we need to check the mappings as we have Key figures & related units? Because, I checked the dump & noticed that there is wrong with the unit part. I could not understand the exact issue on what is the root cause. We also read the forums where we need to correct the routines, however there are no routines that were used in between the PSA & ODS at which the loading is happening. We are only using the fields from ODS to the next level lookup which is not related to the below DTP loads. Can anyone provide me some inputs as we are at crucial state of loading. Thanks, Vikranth.

Madhav,
it's an extract from your code:
|Line |SourceCde                                                                                   |
| 1851|   USING                                                                                    |
| 1852|     record_no      TYPE sy-tabix                                                           |
| 1853|     source_system TYPE rsa_logsys                                                         |
| 1854|     iobj_name      TYPE rsiobjnm                                                           |
| 1855|     r_request      TYPE REF TO if_rsbk_request_admintab_view                               |
| 1856|   CHANGING                                                                                 |
| 1857|     result         TYPE lcl_transform=>_ty_s_TG_1-UNIT                                     |
| 1858|     returncode     TYPE sy-subrc.                                                          |
| 1859|                                                                                            |
| 1860| DATA:           ls_error_log   TYPE rssm_s_errorlog_int.                                  |
| 1861| FIELD-SYMBOLS: <lt_error_log> TYPE rssm_t_errorlog_int.                                  |
| 1862|                                                                                            |
| 1863| ASSIGN ('G_T_ERRORLOG') TO <lt_error_log>.                                                |
| 1864|                                                                                            |
| 1865| CALL METHOD zcl_g_routines=>check_uom                                                     |
| 1866|    EXPORTING                                                                               |
| 1867|      iv_logsys     = SOURCE_SYSTEM                                                         |
| 1868|    IMPORTING                                                                               |
| 1869|      ev_returncode = RETURNCODE                                                            |
| 1870|    CHANGING                                                                                |
| 1871|      cv_uom        = RESULT.                                                               |
| 1872|                                                                                            |
| 1873| IF RETURNCODE NE 0.                                                                       |
| 1874|                                                                                            |
| 1875|    ls_error_log-record = RECORD_NO.                                                        |
| 1876|    ls_error_log-msgty = 'E'.                                                              |
| 1877|    ls_error_log-msgid = 'ZG_EDWH'.                                                        |
| 1878|    ls_error_log-msgno = '003'.                                                            |
| 1879|    ls_error_log-msgv1 = RESULT.                                                           |
| 1880|                                                                                            |
|>>>>>|    INSERT ls_error_log INTO TABLE <lt_error_log> .                                        |
| 1882|                                                                                            |
| 1883| ENDIF.                                                                                    |
| 1884|                                                                                            |
| 1885|* RESULT = .                                                                               |
| 1886|* RETURNCODE = 0.                                                                          |
| 1887|ENDFORM.
Is this code a standard or specific one?
Amine

APD: dump GETWA_NOT_ASSIGNED

Similar Messages

Maybe you are looking for