Aperature crashed after 3.3 update. I am a novice at best when working with restore functions. Any suggestions on how to fix this problem?
I had the 3.3 update window with Aperature pop up and say that I could no longer work with my library until updating Aperature. The update froze up about 90% through the completion of the last set(9 of 9/ 90% complete) and ran over night. My MAC shows version 3.3 installed. When I try to open Aperature, I get a system crash error. I am a novice at best when working with software and I am panicing because of the amount of pictures that I have on the system. I do back them up but do not know how to restore Aperature software(I purchased it before the app store and can not find it). Please advise.
There is an Aperture forum that you can repost in, that is where you will find the guru's for that product. Simply click: Aperture to get there. BTW before you do please complete your profile, it makes it much easier for those attempting to assist you. You can find instructions by clicking Profile Update
Similar Messages
-
Sound on my iPad 2 stopped working 3 days later after installing iOS 7. I already have tried turning off the iPad and returning back on, and a Reset, which neither worked. My sound only works using the ear phones. Any suggestions on how to fix this problem?
Have you checked the mute switch on the right side, above the volume button?
-
When I open newsstand it only stays open for 1 second then shuts down. This started happening after I upgraded to 6.0. Any suggestions for how to fix this?
Try quitting Newsstand completely - double tap home button, delete it from the multitasking shelf - then launch it again.
-
My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?
http://discussions.apple.com/thread/3418045?tstart=60
-
Every time i try to do anything with itunes it freezes after a few seconds and i have to force it to close. Does anyone know how to fix this problem? Im aweful with computers and have tried everything i know of.
Hey newyearnorma,
Thanks for using Apple Support Communities.
It sounds like iTunes has been freezing on you, take a look at this article to troubleshoot.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Have a nice day,
Mario -
I recently got a message saying I could update my Itunes so I did, but now none of my devices show up when i hook them up, can anybody help me with this problem?
Hi cwarren90!
I have an article here for you that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.
This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any ideas on what may have caused this and to fix it?
If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
I upgraded to maverick last night and now my MacBook pro won't charge.
One thing to try is Resetting the System Management Controller .
-
I appreciate any feedback to fix this issue.
THIS is happening to me too and i have dione all the things ive see to do on line nothing is working
-
This was previously a problem with one of the older versions if iTunes and had stopped happening for a while with the new version. Any ideas why this may have recurred and how to fix it?
Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").
-
So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
When it says restore the iPid via recovery mode, try placing n recovery mode and restoring several times. -
AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?
If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.
-
HT1338 after an update safari stopped working any ideas on how to fix this?
after an update safari stopped working any ideas on how to fix this?
Use another browser to install Safari again.
You can download Firefox for the Mac, place the download on a USB thumb drive stick it into the Mac and copy it, run the installer.
Once FF is on, download a new copy of Safari from Apple's site.
https://discussions.apple.com/docs/DOC-3046 -
I downloaded Yosemite and I use CS5.5. after much wrangling with Java I can now open photoshop, illustrator and indesign.
However acrobat 10.1.12 as soon as I open a document it crashes 5 seconds later. Any one know how to fix this?Hi ,
Try Un installing and reinstalling the program and make it up to date.
Maybe you are looking for
-
Can't view tables in SQL database
Hi, I'm using DW CS4 to connect to SQL server 2005. I can connect to my database, but when I try to create a recordset, the only tables I can view or select is everything in the System Tables and System Views - not the tables that I actually want to
-
"Alias Unset" Error While Activating Analytical View
Hello Everyone, I am facing a strange issue while activating Analytical view in HANA Enterprise. I have explained my scenario below. Could anyone help me or guide me if something is wrong here ? 1. HANA Enterprise Version: 1.0.63 2. I have created a
-
So I tried to partition my hard drive and I got the following error message: +Verification failed. This disk could not be partitioned.+ +Use Disk Utility to repair this disk.+ And so I continue on to Disk Utility and I try to verify the disk and I ge
-
Dev Days Tutorials : Can't log into Apex and Can't connect to Ora server
Hello All, I downloaded the pre-built Oracle VM from Developer Days. The setup works fine. I am now trying to follow hands on labs. There are a couple of things I am stuck at (at the very beginning). 1. The link to http://localhost:8080/apex does not
-
Struts RequestProcessor or Action derivated class?
Hello there, I just started to develop a project 10 days ago, and although I have read a struts-related book and some articles I want to make sure about some best practices while using this framework. I have read that it is recommended to extend Requ