Aperature not responding. Apple has determined it is the hardware. Any where to start?

Aperature, alone among my software, will not open. Have worked with Apple. They believe it is deeper in the hardware.
Any suggestions for a hardware novice?

Hello, (tap, tap),
Was this resolved? You didn’t answer with exact Aperture & OS versions.
It would be nice to know, though I understand that its rather easy not to follow up once one has an answer.
Since you said you worked with Apple support, can we assume that after moving to Yosemite, you DID update Aperture to the push
version which was supposed to be installed to work with Yosemite?
If there is a problem with the hardware, per Apple support - did you take your laptop in?

Similar Messages

  • Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail.

    Hi
    I got an e-mail stating that Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail, and that mine was one that may fail and to book an appointment with Genius to click here. So after making an appointment we then took out iMac to the shop affixing thirty minuets before appointment time and had to Waite until 12-45hrs. When we were told that we would have to leave the Mac with them for two to three days to replace the hard drive.
    Can anyone advise, is this normal to make an appointment only to find that when you get to the Genius department  in the Apple shop they then say because of the amount of iMacs that have come in today it will take days to replace?

    Hi mende1
    Thanks for replying but when anyone makes an appointment surely the work should be carried out then not to be told to come back days later especially when you have traveled over one hundred and fifty miles to get to the shops. It may have been a free replacement but the cost of petrol for the journey comes to more than one hundred euros.

  • IPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?

    iPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?

    Try what you have not tried so far. You may have tried all and the Apple store maybe in order.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My ipad2 safari is not responding and has greyed out

    safari on my ipad2 is not responding and has greyed out... is there a way i can sort it out ?

    If you follow Bob's instructions.. allow it to cool down.. maybe leave it off overnight.. if the disk fails to start when you power on.. or listen carefully and hear if the disk is failing to spin up properly then you have either dead drive or dead supply.
    Is it in warranty or applecare, let apple replace it?
    If it is out of applecare even, open it and replace the disk.
    How old is the TC? What model from the rubber mat A1xxx? What size disk?
    Certain drives are becoming unreliable.. The WD black in Gen2, The Samsung Spinpoint in Gen3 and WD green in Gen3 and Gen4 are none of them great drives.
    Out of warranty do the job yourself.. there is plenty of stuff about drive upgrades for the TC.
    Excellent instructions here.
    http://www.ifixit.com/Device/Apple_Time_Capsule

  • Every time I open Firefox or open a page in a new tab, I get the error message that a script on this page is not responding or has quit working. This has only happened since I upgraded to 5.0.

    Even when I start firefox I have to sit here and wait for it to tell me a script on this page is not responding or has quit working. Once that happens which takes a while, I can say stop script and it moves on. I've always liked using firefox and have never had a problem in the past, however if I can't get this particular problem fixed, and I've tried many ways to do this, I may have to change to another browser. I would hope that you could find out why this is happening to me before I make that decision. One other thing, I am using the dreaded Vista OS.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place.  Can any tell me what app I can download to replace it.

    When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place.  Can any tell me what app I can download to replace adobe flash player.
    Thanks

    Use the iSwifter browser from the app store. Works for most flash content.

  • I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears.   I have tried connecting the iP

    I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears.   I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac).   What else can I do?

    You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
    If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
    I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
    Snow Leopard can still be purchased in the U.S. Apple Online Store.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

  • R9 280X Display driver not responding and has recovered error

    Hi,
    My new R9 280X OC Edition causes  "Display driver is not responding and has recovered..." error. After this error, my game would hang. It also caused internet browser to crash.
    It has been very frustrating, after 10 minutes of game play, the game would just crash. I have tried many way to try to solve the problem without success
    I have.
    1) Over clock/ lower the graphic card clock
    2) install/reinstall latest ATI release/beta driver, reverted to driver that come with installation disk
    3) update my motherboard bios
    4) reinstalled windows 7
    My PC Spec is
    Windows 7 32 bit
    4G RAM
    Intel Core i5-2500K @ 3.3 GHZ
    Any help would be appreciated. Thanks.

    Use >>this<<
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (302.rar) and put the included file (TV277MH.302) on that stick.
    Rename TV277MH.302 to 302.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 302.rom [ENTER] and let it flash the vbios.

  • I have an apple trackpad that shows that it is connected to Bluetooth but it does not respond. I have tried restarting the computer and turning the trackpad off and on but it will not work. Anyone have any ideas on what is going on here?

    I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?

    There are reports of similar behavour but generally it is due to battery connections.   Is the indicator light working steadily or does it blink or even not function.   Here is the Apple document dealing with some of the problems.
    http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
    Is your machine within the guarantee period or under Apple care.   If so, return it to any apple retailer for examination and possible replacement.

  • How can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cl

    how can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cos Nigeria has a very large apple market plus phones and most recently ipads especially. its been frustrating trying to get a macbook, even have to wait for when someone will travel out of the country, then you send the person(thats if you have the money at that time). Please somebody help inform apple maybe they can do something about this, its really disappointing.

    This is a user-to-user technical support forum. You're not addressing Apple here. Use the apporpriate link on fhe Feedback page to let Apple know how you feel:
    http://www.apple.com/feedback

  • Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

  • Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

    today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

    Same issue already several weeks.
    And we are not alone:
    http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
    At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
    ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
    I already contacted BB Help at Twitter. Answer:
    Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
    I did replay:
    You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
    This my replay was 22 of march. No more answer from BB.
    I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
    What I already done:
    For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    This
    For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
    Doesn't help
    And this:
    For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
    No result.
    After install all of them phone wants to update to 10.2.1.2102 by air.
    BBVE in all versions sais: Can not obtain data from sensors.
    Dear BB support, please, can you explain, how to resolve this issue?

  • Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

    Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

    I would instead say you have a problem since nearly all IPs work as advertised.  IF you do have a bad phone, take it into an Apple store and get a replacement.  Hope you didn't jailbreak your phone though as Apple probably will tell you, you broke it, you fix it.

  • Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

    Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

    Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    * What may cause Firefox to hang at exit
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
    **Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    ** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''<u>one at a time</u>''' until the problem reappears. '''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    ** See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

  • We use Thunderbird all the time and love it, but for about a week it constantly goes into not responding mode. My boss uses the same service at home with no pr

    Thunderbird is a great asset to my boss and I. We use Thunderbird all the time and love it, but for about a week it constantly goes into "not responding mode". My boss uses the same service at home with no problem at all.
    I did an "safe mode" and restart and for a few minutes I thought it was "healed". However, I did a search and the same thing started happening again. The little blue ring starts spinning and "not responding" pops up above the toolbar. Sometime the screen fades to a sort of greyish and no mouse click are responded to, even to close Thunderbird.
    Please help however you can. Our office number is 512.246.3995.
    Thank you,
    Mary

    We wonder if it is a firewall problem that developed here at the office. My boss uses her account at home and all is well, but here, experiences the same issues I described

Maybe you are looking for