Aperture 1.1 Unable to update

I have OSX 10.4.6, Aperture 1.0.1 and Norton AntiVirus turned off. Aperture update won't alow me to update to 1.1. It keeps telling me I need 1.0.1.
Have any of you run into this problem?
Thanks in advance,
Jim

1. Be sure you are running OS 10.4.6. If not, install it.
2. Start from scratch with Aperture. Delete every trace of Aperture (EXCEPT THE LIBRARY! YOU DON'T WANT TO LOSE YOUR IMAGES). USE Spotlight, the Finder, and Appzapper (if you have it).
3. Now run Repair Permissions, and even try Repair Disk in Disk Utility (you will have to boot from the original OS CD or a bootable disk that has Disk Utility on it). I would even run Cocktail or Tiger Cache Cleaner, or a similar utility to make sure there's nothing in a cache somewhere that is causing your problem. In short, spend half an hour making sure that your system is in top shape before re-installing Aperture.
4. Then install Aperture from your original disk.
5. Then go to the Aperture download page and get 1.0.1 and 1.1 from that page (if you had 1.0.1 from when it was first released, this earlier 1.0.1 is missing some key that tells the system you have now installed 1.0.1, and this means you can't install 1.1 on top of it). You MUST have the 1.0.1 which is on the same Download page to the left of the Download for 1.1.
6. Install 1.0.1.
7. Now install 1.1.
8. Run Repair Permissions again.
If this doesn't work, I'd say you have a serious system problem and you may have to reinstall the system.

Similar Messages

  • I am unable to update aperture 3.1.1

    I am unable to update Aperture version 3.1.1 to current version. I have not been offerred the subsequent epdates. i receive a message I require 3.1 or later

    With Aperture open select Aperture->About Aperture.
    What is the version reported? Is there a Licensed to Section and is there a serial number shown?
    How are you trying to update the progrm?

  • Unable to update aperture 3

    I just got a new MacBook Pro With Aperture 3 pre installed. Aperture runs okay but when I tried to update to version 3.6 I got the following message:
    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    My only thought is that because I ported my Desktop from my old MacBook, it appears to be a different user. Is there any way to resolve this?

    Did you use a different AppleID on your old Mac?
    Check, if Aperture is listed on the Purchased tab of the AppStore on your new Mac, perhaps with an "Accept" button.
    If you are seeing Aperture on the Purchases tab, move your current Aperture app to the Trash (don't empty the Trash), and try to download again from the Purchases tab of the App Store.
    If you are not seeing Aperture among your Purchases on your new Mac, check your old Mac. Have you used a different AppleID on that Mac?  Which version of Aperture are you running there?  If you are running Aperture 3.6, copy the updated application simply over. If you are running a different version, try to download Aperture on your new mac, by signing into the AppStore with the same AppleID you use on your old Mac.
    If all fails, contact the App Store Support from the Quick Links at the main App Store Page.

  • After upgrading to AP3, "unable to update vault"

    After upgrading to Aperture 3.4.4, I cannot update my vault. The message says "unable to update vault" and asks me to "Fix Permissions" which I do, to no avail. Please advise! Thanks in advance for any help!

    What version was the vault made with?
    As a vault is nothing more than a snapshot of the current state of the library you are vaulting there is nothing to be lost (except some time) if you just create a new vault. So if you have the room that is what I would do.
    Post back if you that won;t work for you.
    regards

  • Stacks - unable to update applications

    After installing Leopard, I instantly created a couple of stacks of applications. After putting all my photo applications into one stack, I was unable to update Aperture. After trying to install the update, I received an error message stating that I didn't have 1.0 installed, which I did.

    I don't think this is necessarily a defect of Leopard. Under previous Mac OSes, Software Update wouldn't locate applications if they weren't in their folders of install (e.g., Pages, Keynote, and now Numbers should be in the "iWork" folder created by the iWork Installer, and the iLife applications need to be in the "Applications" folder where they are originally installed to be located, rather than being conveniently tucked away inside a user-created "iLife" folder).
    Another way to get the benefit of having a convenient Stack or Stacks AND having Software Update successfully locate your applications is to create your Stack folder(s) as desired and fill them with aliases of your applications. Of course, their icons will display the locator arrows on them when displayed from the Stack(s). Not sure if that'll bother you or not.

  • OSX: Adobe Creative Cloud unable to update (stall at 50%)

    Hey experts,
    ever since signing up for Creative Cloud I have been unable to update any application as my regular user on OSX. After exchanging 23 emails with the Adobe support in 2013 I finally gave up and created a workaround in the hope that the Adobe developers would finally look into the issue and fix the bug. With the last update of Creative Cloud my workaround stopped working so I took time to do a complete reinstallation of Creative Cloud to see if the bug was finally fixed. It was not.
    The bug:
    -Installation of Creative Cloud and Photoshop, Lightroom etc. through the Creative Cloud app works.
    -Any try to update a CC applicaton (e. g. Photoshop CC 2014 results in the state "waiting" at 50%):
    -Trying to update through the menu of Adobe Photoshop CC 2014 "Aktualisierungen"
    resulted in the following error message:
    Translation: "Update failed. Unable to apply updates. Adobe Application manager is already running. Close all instances of Adobe Application Manager before applying updates. etc."
    What I tried to resolve the problem:
    What did not work:
    -Complete reinstallation of Creative Cloud:
         -Uninstall of all Adobe applications
         -Ran the Adobe CC Cleaner tool
         -Eliminated every single *[Aa]dobe*-folder on my disk including my profile.
         -Reboot
         -Re-installation using a fresh CC download.
    -The common 1st-level-support acts of desperation:
         -Rebooting
         -Checking the file system
         -Fixing permissions
    -The bug even survived 2 OSX system upgrades
    -Even tried to track down the bug myself which I gave up after having discovered the endless chain of Creative Cloud and AAM-Processes executing each other...
    What worked:
    -Installing updates as another OSX user. (Which is cumbersome and to be honest I am unwilling to create a new profile and redoing the settings of all installed (especially non-Adobe) applications because of an Adobe bug...)
    Any help will be greatly appreciated.
    Patrick

    Sheena Kaul schrieb:
    Hi Patrick,
    Can you try to run the Adobe Creative Cloud on root user account?
    Enabling and using the "root" user in OS X - Apple Support
    Regards,
    Sheena
    Hessijames schrieb:
    What worked:
    -Installing updates as another OSX user. (Which is cumbersome and to be honest I am unwilling to create a new profile and redoing the settings of all installed (especially non-Adobe) applications because of an Adobe bug...)
    Any help will be greatly appreciated.
    Patrick

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

  • I am unable to update  apps on my iPhone 5.

    I am unable to update my apps on my iPhone 5. As I select the update button it asks for my password but the goes back to like it was. I have already rebooted a couple of times & even logged out & signed back into my iCloud, iTunes & App store. Nothing worked. But, I am still able to download new apps.
    Please tell me what can I do now to update my apps. All suggestions will be appreciated.
    Thank you.

    Can you explain a little more?  Is there a problem with your app store account?  If so, http://www.apple.com/emea/support/itunes/contact.html
    If there is another reason, can you describe it?

  • I am unable to update apps on my iPhone 4. I tried rebooting but still I get an error message which says "unable to update"

    I am unable to update apps on my iPhone 4. I tried rebooting but still I get an error message which says "unable to update"

    I really didnt want to restore unless i had absolutely other option.
    as per usual, apple wont help unless i buy an apple care plan. helpful much.

  • Unable to update apps on iPad mini. I have even restored the iPad and now I can't download any of my previously purchased apps.

    Can someone help me. I am using an iPad mini with iOS 7.0.4 with wifi connection. Have had no problems until recently when I was unable to update apps and then noticed that some apps would open but no data would be available in apps like intelicast and Pinterest. I have restored the iPad and now I am unable to download any of my previously purchased apps.

    1. Make sure iPad is using the latest software
    2. Settings>General>Date and Time>Set Automatically>On
    3. Make sure Time Zone is correct
    4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

  • Error: 1013231 Unable to update database while in readonly mode for backup

    Hi all,
    Wen im deleting the members for dimendsion , its giving error (hyperion 11.1 aso)
    Error: 1013231 Unable to update database while in readonly mode for backup , how can i solve this problem ,plz can any one help on this
    Thanks

    Has somebody set the database ready for archiving, maybe some maxl has been run and the db has not been returned from read only mode.
    Try running the following Maxl (change app.db to match your app/db)
    alter database app.db end archive;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to Update Database.

    Hi All,
    I was trying to load data thru load files and got the following message.
    Unable to update database while in readonly mode for backup
    Unexpected Essbase error 1013231I tried looking at Information Help Menu.
    I could not find the error number.
    Could anyone help.
    Thanks in advance.
    Bal.

    Hi Atul,
    Thanks for the help.
    The Readonly error got resolved.
    But still the following error is displayed when I am loading data thru load rule.
    To Brief you up, I had done a database corrupt check using validate command because of the following error. The information map asks you to do the same since the other parameters are in the affirmative ie sufficient disk space, not using addsin, File is present.
    *Unable to Read Information From [C:\Hyperion\essbase\app\SMC\PL\PL-BS-LD.rul]*
    Unexpected Essbase error 1019003
    I used the VALIDATE <error.txt> command and found that the database is not corrupt.
    I also used the export command to see if everything goes well. That also works well.
    Note: I do not have any data in the Cube. I had cleared all data.
    Can you please help ?
    Regards
    Bal.
    Edited by: user11091956 on Apr 12, 2010 11:26 PM

  • Unable to update numbering schemes in define purchasing options

    Hi,
    We are unable to update the numbering scheme from manual to automatic in define purchasing options (Numbering Tab). Documentation says that you can update it, but it does not give any reason under what circumstances we would not be allowed to update the numbering schemes.
    Thanks,
    Ketul.

    Hi Sandeep,
    I am doing multi organisation implementation and only one ledger they do not require Inventory and Purchasing modules. Because of that i will not create any inventory organisation for that selected ledger.
    This ledger will have seperate responsibility for AP.
    Howver, my problem is when i am trying to complete the financial options, inventory organisation is mandatory for that responsability. Without inventory organisation i am unable to save the financial options.
    Please assist me how to overcome this issue.
    Thanks,

  • I did a software upgrade to IOS6 and my Iphone4S is now unable to update. Do I lose all my contacts and calendar entries when I restore?

    I did a software upgrade to IOS6 and my Iphone4S is now unable to update. Do I lose all my contacts and calendar entries when I restore?

    You should be syncing all your contacts and calendars with your computer, either via iCloud or iTunes, so it is easy to re-sync them back to the phone after you restore.

  • TS3694 I have a Ipod touch 4G, and i am unable to update or restore it.

    I have been unable to update or restore my Ipod touch to the 5.1, and 11.1 for my computer. each attempt to update has lead to the error report 3194. I'm not sure what it means or how to fix it. Please someone point me in the right direction to get this fixed.
         P.S. - Don't put me thru the Apple support run around.
                             THANK YOU

    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need ser

Maybe you are looking for