Aperture 1.5.3 fails to install: you have to install 1.0 first
Hello!
I downloaded 1.5.3 today from apple's website and wanted to install it onto my MacBook. However, the installer complains that there is no 1.0 installed on my system. I removed all Aperture stuff from /Library/Receipts and did a clean install of 1.5.2 from the cd. I then started the installer again, but it is still complaining about no version 1.0 being installed on my system. Any idea on how I can make the Installer do what he is supposed to do?
Christian
hello, Christian
quote: "downloaded 1.5.3 today from apple's website and wanted to install it onto my MacBook. However, the installer complains that there is no 1.0 installed on my system."
i downloaded Aperture 1.5.3 as a "Download Only" and it would not install by double clicking on the Package (Aperture 1.5.3Update.pkg) in the system Library. for some reason it will only install via Software Update... "Install"
victor
Similar Messages
-
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
i tunes will not re install. reason is "service apple mobile device " failed - werifythat you have sufficient PRIVILEGES to start system
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I recently had my computer serviced. I re-downloaded Thunderbird (getting a newer version), and retrieved my saved email. Now, Thunderbird keeps asking me to compact, but when I do, I get this error message:
The folder 'Inbox' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
Obviously, since I'm getting mail all the time, I have write privileges, and disk space. The question is whether there's a setting I need to specify, or whether Thunderbird is writing to a special partition that may have gotten write-protected when my computer was in the hospital - or whether this is related to a known bug.
All help appreciated.The only know bug I can see is probably your anti virus is trying to scan the file when the new inbox is created leaving Thunderbird to think the file was not created.
As an experimental / diagnostic process. Restart the machine in safe mode with networking using Microsoft instructions for [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7] then try the compact. If it works I was most likely right. If it does not, another idea must surface. -
I am writing my theses and want to start with Chapter 1 on page one,
ThanksMenu > Insert > Section Break
and change the numbering in:
Inspector > Layout > Section > Start at: > uncheck Use previous headers and footers
Menu > Insert > Auto Page Numbers/Page Numbers
Right click on the Inserted number to choose its format.
Peter -
Do you have to charge the ipad2 first before doing the start up
I just recieved my new Ipad2 and have never had one .. What is the first thing to do
Connect the iPad to your computer with the supplied connecter and launch iTunes (if it does not start automatically) then follow the prompts in iTunes. Read the support article first.
http://support.apple.com/kb/HT4053 -
Hi guys,
I'm reposting it as no one found a solution to my post...
I'm getting the error trying to install Muse CC on Windows.
Using Adobe Cleaner Tool, as in other posts people recommend, doesn't help as Muse doesn't appear on the list of applications to remove (as it fails to install in the first place).
Reinstalling Creative Cloud desktop application didn't help either.
Creating Admin accountdidn't work either...
I'm on Windows 7.
Any suggestions? I'm at my wits' end...Hi Brad,
Thank you for reply.
Yes, I am running the latest version of AIR and Flash Player as well.
Here's the error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
----------- Payload: Adobe Muse 5.0.0.0 {9A554C9D-E12D-4205-8101-9F4337CD5673} -----------
ERROR: Third party payload installer InstallAdobeMuse.exe failed with exit code: 10 -
What does the message "You have exceeded your license" mean? I cannot open aperture on my computer
I installed aperture on my lap top. I now tried to install it on my Mac Pro. I got a message saying I have exceeded my license, but it let me install anyway. Now there is a grey circle with a line thru the app icon and I cannot open. Can someone help me?
We have the boxed version
The licence for the boxed version allows two installations, one on a Desktop Mac and one on a portable Mac.
But when you install the boxed retail version on a Mavericks system and update it to Aperture 3.5.1, your licence for the retail version will be converted to a licence from the App Store and tied to your Apple ID. After that, your retail version registration key is no longer valid.
You have to download Aperture from the App Store and use the AppleID, you used when you updated Aperture to 3.5.1.
Do you have updated Aperture to 3.5.1 on one of your Macs? Then delete the crossed-our Aperture on your MacPro and launch the AppStore. Sign in with the same AppleID you used on your laptop. Open the "Purchased" tab and look for Aperture. Is it there and is the "Install" button available? -
IOS 5.1 + iTunes 10.6.1 = can not sync multiple albums. Try and confirm you have the problem...
Hi, guys!
So, I've just found out that I can not properly put my music on both iPhone 4S and iPad (iOS 5.1).
PLEASE, try do the following and place the result here whether you see same behavior.
Steps:
1. Enable Manual sync on you iOS device;
2. Drag and Drop any album from your library to iPhone -> songs start to transfer;
3. Now, while songs are transfering get another album and drop it to your iPhone;
4. ISSUE IS THAT: you should notice that the transfer of the first album is interrupted and the latest album is transferring ONLY;
So, at the end you have just several songs from first album and all songs from the second one. So, basically each new album you drag and drop interrupts previous transfer...
I see this behavior on both my devices and on two different Macs... Weird.
DO YOU SEE THE SAME?
God bless you.You're not alone. I'm having the same problem. You might also want to check this thread: https://discussions.apple.com/thread/3813117?start=0&tstart=0
There's no solution yet, but you're not the only experiecing this issue. -
Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?
Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Unable to install iTunes 11.1.4.62 on windows 8. I get
Service "Apple mobile Device) failed to start.
Verify that you have sufficient privileges to start system services.
I am trying to install it on my desktop. I am also in Administrator mode. My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
runtime Error!
Program: C:\program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contace the application's suport team for more information.
My iTunes stopped working at this time. I thought I could delete iTunes and start over. This tactic did not work.
Can anyone make sense of what I am saying and help me to get my iTunes back again?Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
not able to install itunes in windows 7. Whwn I am installng setup the error displayed as "Service 'Apple Mobile Device' failed to start Verify that you have sufficient privileges to start system services" and when i ignore this message and continue with installation of itunes and open the installed itunes in laptop it gaian shows the error "iTunes was not installed correctly. Please reinstall iTunes Error7(Windows Error 14001)". Please provide me some solution.
Please give me some solution on above issue.....
-
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
How to display database records in text item
hello friends, I'm using forms6i.. I have text item named "username" in layout editor.I created this text item from data block wizard..I set Number of items displayed=3 in that wizard.. In property palette of of "username" i have following changes Nu
-
Hello, I like to buy classical music. But with iTunes 9.0, when I look at a titel, it is impossible for me to know the artists. As my English is catastropic, I'll give you an example: I just looked at "Requiem" by Verdi with Antonio Pappano as conduc
-
I cant operate my new ipod nano(the screen is locked)
I juz got a new ipod nano as a present. But there is one thing keeps bothering me up2 now. I cant use my new ipod, cuz whatever i did to push the menu or center panel, the screen doesnt work at all!! I reset and update my ipod accroding to what the w
-
When connecting ipod to PC USB, computer restarts
When I connect my ipod to USB immediately following taking it off my AC adapter, it causes my computer (PC, XP) to restart. Today I updated to Itunes 5. What's up with that?
-
SOLAR01 - BPR content for Oil and Gas - JVA processes
Hello We are dealing with the creation of the structure (scenario, processes and steps) for a Oil and Gas project trying to use BPR. In order to locate the right process we are dealing with Solution Composer, with configuration variants from the Oil