Aperture 1.5.3 upgrade - now cannot connect to referenced files?

I just did the update to 1.5.3, and now my referenced files are all "offline" according to Aperture even though nothing has changed in the physical setup of my system.
Worse, when I attempt to "manage referenced files", the upper half of the window shows the 500GB external drive (Western Digital firewire 'Mybook') is offline, and the 'Mount' button is disabled. In essence, all of my image files are now offline according to Aperture, and it is not allowing me to Mount the drive that is there, plain as day, for FInder and other apps to see.
Also, the 'Reconnect' and 'Reconnect all' buttons on the bottom of the lower half of the window are disabled. The only buttons that are live are 'Update selection in browser', 'Hide reconnect options' and 'Done'. And the window's close and collapse buttons (upper left corner) are also disabled, though I can make the window full screen.
Anyone else notice this rather major problem?
TIA
MacBook 2GB RAM Mac OS X (10.4.8) 23" Cinema Display

Oops - user error after all - when the MacBook rebooted somehow the 250GB firewire drive (they're daisy chained) didn't mount, so while I saw the 500GB in Finder Aperture evidently was having a problem because of the 250GB.

Similar Messages

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

TS1702 Supercam Pro update.Just downloaded update 24-05-2013 and now cannot connect to DVR.Entered correct http address but not connecting,anyone else having same problem?

Supercam Pro,latest update yesterday 25-05-2013.Now cannot connect to my DVR.Anyone else having problem with this update,worked perfectly before???

The OP is correct, I have done many tests. With IOS6 there appears to be a dns issue in some cases with IOS for both ipad(2) at lease (my wife won't let me upgrade here v1) and the iPhone4s in my case. Pretty easy to diagonse, I wish Apple would fix it.
1.) I use a Juniper 5GT wireless firewall and all of my other devices (many apple, ipad, MBP, iMAC,3 ipods etc) are fine: Not ipad2 or iphone4s running IOS6
2.) after upgrade nothing worked. narrowed it down by messing with dns (I have my own dns server)
3.) Strange thing; dns works over MiFI (Verizon) and Carrier
4.) confirmed that it is a dns and not network issue.
-down load free tool called ping-scope-lite. (obviously you need to turn off wifi to do this)
http://itunes.apple.com/us/app/ping-scope-lite/id431500107?mt=8
turn on wifi
- ping Level3 dns server 4.2.2.2 or Googlesdns servers 8.8.8.8 or 8.8.4.4 these worked.
-now ping by name google.com or ipchicken.com
- try others; same result.
Apple did say that they would give me another iphone 4s: I just wasn't sure that would fix my issue. I tried downgrading to 5.1.1 but I got an error saying my device wasn't able to do so (tried even blocking itunes from contacting Apple) I whis this could be fixed. I did even have it working using my own dns server but now I can see that my phone over wifi isn't even trying to make a dns request now.
Stuck

We have just installed Lion and now cannot connect to MyExpat

we have just installed OS X Lion, v10.7.2 and now cannot connect to MyExpatNetwork on my Macbook pro. Any suggestions?

yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver. If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package. and then you can install it.
** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
well, enough for tonight
if this didn't help you, then ask me again tomorrow
John b

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

In many, many apps Apple has now created a confusing array of "save as..", "export", and "duplicate" all doing essentially the same thing - saving a new copy elsewhere possibly with format changes. Drives me nuts.
But its always there.
Grant

I have updated to iOS8. Now cannot connect to BT speaker I have been using for months. BT discovers it but will not pair. Help please

I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.

I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
... And no I am not trying to connect both at once. To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair. The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect.

In Aperture 3.4.1, I am not able to connect with referenced files on a network

I am running OS X 10.8.2 and Aperture 3.4.1, and am unable to connect with referenced files on a network. Specifically, the referenced files reside on my iMac and I am attempting to connect to them from my MBP. They appear in red in the dialogue box. While I know this has been a long standing issue in other versions, I was hoping it had been solved by now. Any assistance will be appreciated.
Thanks -
Dudley

http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards.

Upgraded to Mavericks, now cannot connect to iCloud, no e-mail!

Just upgraded.
Restarted.
Mac tells me it cannot connect with iCloud because there's a problem with "catsongs at me dot com"...
... except, I don't use catsongs at me dot com for my account...
... I use the dot mac extension
Restarted away... same message...
On the road and now locked out of my MAIL!!!!
Keeps telling me there's a problem with my dot me account in iCloud... but I don't use that account for anying. Signed in via Apple site... it's my dot mac...
Help!
Thanks,
Cat

Just to be clear.
AIM stands for AOL Instant Message. So an AIM Password is an AOL Instant Message password.
An Apple ID issued by Apple (@mac.com and iCloud issued @me.com and @icloud.com ending IDs) can also be valid AIM Screen Names
In the past the password at Apple had to comply with the AIM limit of 16 characters.
I have seen a recent post that suggests that this limit may have changed.
Try logging in here if the Name was registered at AIM or is an @mac.com name
https://settings.aim.com/
(You cannot log in here with an @iCloud.com or @me.com ending ID as there are addtional checks in iChat 6 and upwards that invloved logins to both Apple And AIM at the same time to confirm access to the password).
10:07 pm Saturday; January 11, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

Upgraded to iOS5 and now cannot connect to iTunes Store

After upgrading to iOS 5, I cannot connect to the iTunes Store. I was having the problem at home where I was connected to my home network, and now when I'm not connected to a network.
Suggestions?

This appears to be an Apple ID issue. I was forced to change my username to my email (which I had already done years ago) after searching and searching for reasons why my password all of the sudden didn't work on my iPhone. This started about 3-4 weeks ago.
So my password needed to be re-set when I tried to access my iTunes on my computer, and my iTunes balance disappeared. My username was still my email address (as it had been for years) but my gift card balance was gone and so was ownership of all my apps and music
Now, after upgrading to iOS5 my ONLY Apple ID now works with the re-set password, but it lost all of my apps. They are there, but when I go to update them through the iTunes store, I get that "cannot connect to itunes store" error message because after that weird 'update' to my Apple ID it seems to have lost all history I've had with Apple.
This is so upsetting, as I'm finding out that Apple does not allow recovery of these purchased items between these ID's. So, now I'm wondering where in the heck is my "old" apple id?? I can't sign in with my "old" info....
Lame.

On a MS Vista platform I just "upgraded" to Firefox 10.0.2 and now cannot connect. My wireless devices go throught the same DSL line and work. fine. 9.0.1 (previous version) worked fine. Suggestions?

I just "upgradd" to Firefox 10.0.2 and now cannot access the internet. This is an MS Vista platform. Wireless devices, through the same DSL line, are still fine, suggestions?

Did you try to view this article? [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Problems connecting after Firefox Update]
You should also try using Firefox in [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode]
Thanks,
Borian

I just upgraded to firefox 6 and now cannot connect to the internet. IE still works fine but firefox won't connect. Any suggestions on how to get the new firefox to connect to the internet?

I just upgraded to ff 6.0.1 via an automatic push. Since then, ff hasnt been able to connect to the internet. Error message:
Firefox can't establish a connection to the server at www.google.com.Firefox can't establish a connection to the server at www.google.com.
IE has no trouble connecting to the internet.

After upgrading, your firewall may not be recognizing the new Firefox version and is not allowing it access to the internet. On your firewall progam's allowed applications list, remove Firefox, then re-start Firefox, try going to a website, your firewall will detect the new version of Firefox, then give the permissions needed for Firefox to have internet access.
*See: [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I recently upgraded to mountain lion and now cannot connect to my Brother QL-570 Label Maker

I recently upgraded to Mountain Lion and now cannot print out on my Brother QL-570 printer. I get as far as typing in the label name and then the labeller or computer disconnect. I have tried downloading drivers from Brother but they can't do that as only Apple can do that but there is nothing in Apple to do that. I also reloaded the program off the set up disc. . Any ideas?

yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver. If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package. and then you can install it.
** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
well, enough for tonight
if this didn't help you, then ask me again tomorrow
John b

Recent Itunes upgrade, now cannot access store, PLZ Help

My Itunes was working perfectly until I did the recent upgrade. Now I cannot connect to the store. The connections are the same, only change was the upgrade.
I ran the restore feature in windows to roll back to earlier time, but still having same problem.
I would gladly uninstall Itunes and Quicktime and reinstall fresh, if I knew _how to save the 300 album cover artwork and playlists and purchased items_ I had saved in itunes to link to my apple t.v.
Any help would be greatly appreciated

Scroll down through this : http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-backing -up-your-itunes-library/
and it will tell you what folder in iTunes contains what you want to preserve.
Copy those folders to a safe location and then, after the new install, move them back to the correct locations.

Moved PC to another country - now cannot connect to iTunes store

Hi - I have a UK iTunes account and I have moved my PC to Switzerland. I tried to update my iTunes and iPod, yet now I cannot connect to the iTunes store.
Can anyone please help?
Thanks,
JC

Ok here goes. I've taken out any serial number or IP address.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
eveshamvale 965X7AA
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.0.31
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2
Current user is an administrator.
The current local date and time is 2009-06-03 21:43:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce 8800 GTX
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {E34BB18D-1AFA-436F-B879-AB44E6DB3DAA}
Description: Generic Marvell Yukon Chipset based Ethernet Controller - Packet Scheduler Miniport
IP Address: <snip>
Subnet Mask: <snip>
Default Gateway: <snip>
DHCP Enabled: Yes
DHCP Server: <snip>
Lease Obtained: Wed Jun 03 21:25:18 2009
Lease Expires: Thu Jun 04 21:25:18 2009
DNS Servers: <snip>
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
An unknown error occurred (-28).
Secure connection attempt to iTunes Store was unsuccessful.
An unknown error occurred (-28).
Secure connection attempt to iPhone activation server unsuccessful.
An unknown error occurred (-28).
Last successful store access was 2009-06-02 17:04:05.

Aperture 1.5.3 upgrade - now cannot connect to referenced files?

Similar Messages

Maybe you are looking for