Aperture 2.1.2 vault update error

ever since i have updated to this most recent release i can no longer update my vaults /___sbsstatic___/migration-images/migration-img-not-avail.png i have reformatted my drives just to make sure they have not been corrupted. i was able to get 1 clean vault update but that is it. just as some other aperture users experienced i too am getting on the splash screen, when A. is first launched a notice i have not yet backed up some files. well dah how can i if i get errors upon errors
i have searched through this forum and specific topic and have not found an answer yet. so perhaps an Aperture support person could take some time out of their busy day and help us all out in this most vexing and annoying matter.
thanks

Ha ha you are also as much a support person as any of us.
I posted it originally hslfway down page 2 of.
 http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/playbook-os-2-1-0-840/td-p/1888743/page/2

Similar Messages

  • Aperture 3 Vault - Updating Vault issue

    I've upgraded to Aperture 3.
    I created a new Vault.
    I started a backup to the new vault 14 hours ago and it's still chugging away with the progress bar at about the 50% mark with a status of "Updating Vault". It hasn't made any progress since it stopped copying the masters about 2 hours ago.
    My library is around 1.5TB and 175K files.
    This is the third time I have tried backing up to a new vault and it always hangs at this point. I'm currently using Superduper to make a copy of my library so I have a current backup of some kind.
    Is anyone else experiencing this?

    You guys aren't backing up these vaults to an external Western Digital hard drive are you? If so, the problem could be that the drives are formatted in fat-32. Aperture 3 doesn't support fat-32 drives. Aperture 2 didn't support them either but was, apparently, more tolerant about them. Aperture 3 flat out doesn't work with them.
    Any external drives used with Aperture 3 MUST be formatted in Mac extended format.
    FWIW, I updated the vault on my Mac Pro for the first time (since installing Aperture 3) this morning. It completed without issues and took the normal amount of time for a brand new vault creation.
    BTW, I choose to leave my master images in their current location and reference them instead of copying them to my Aperture Library. I believe a vault update of an Aperture Library that is managed (all masters copied to the library) instead of referenced (left in their original location) will take longer and make for a much larger vault backup.
    Mark

  • Does aperture vault update just add new photos and information?

    I am wondering if the Vault function when updated will just add the new photo(s) and new adjustments or replace the entire vault. I have already copied the entire library as a back-up on a different external. Was planning on just manually updating the files but wanted to try out the Vault. The information is unclear that it only updates NEW photos and info while keeping the vault and just adding.... Any answers would be great. Thanks...

    Seattle,
    I think I understand your question, but I got a little fuzzy after reading this:
    The information is unclear that it only updates NEW photos and info while keeping the vault and just adding....
    Anyway, when you perform the "Update Vault" function, Aperture does replace the vault.  It updates the vault such that it reflects changes to your library since the last time that vault was updated.  With a large library, but only a few changes, the vault update is pretty quick.
    nathan

  • Aperture Photo Vault Processing Errors

    Aperture 2.1 Photo Vault -- I have process errors. The error dialog shows me 5 at a time. Is there away to list/see all the errors? If Vault finds an error in a project does record it, and continue backing up the project or move to the next project with files not saved? Is there a way to have multiple vaults where each vault only saves a selected set of projects?

    You might be able to see more logged errors using the Console application in /Applications/Utilities. Root around in the left pane for Aperture, and see if more stuff is logged. It likely is.

  • Quitting Aperture During Vault Update

    Hello,
    I am using Aperture 3 in OS 10.6.8.  The library has about 70k photos (managed) on an external FireWire drive.  There are 3 vaults, two on external USB 2 drives and one on our iMac 27".  I usually backup the vaults one at a time since the USBs are so slow.  But this time I did them all at once and Aperture has been working for about 72 hours.  The progress bar is about an inch from the end and not progressing but is "rippling" normally.  The two external vault drives cycle on and off on a regular basis.  Activity Monitor indicates Aperture is functioning.  My problem is that I am going to have to disconnect the library drive in the next few days.  If the update is not finished then is it OK to use the Terminal command recommended by leonieDF in the Aperture User Tips ("If Aperture is unresponsive, how to avoid force quitting?")  to quit Aperture?  I assume I would have to recreate the vaults (on FW drives this time!) but I am concerned about possible effects on the library.  Any thoughts or suggestions on this?  Many thanks!
    Mike

    I would just go ahead and delete the  vaults in Finder with Aperture CLOSED. Then start Aperture and remove the vaults in Aperture.
    When a disk that is being used gets full it is hard to predict what behavior you will see and it might be different each time it happens.  So it is possible that the symptoms you had might have been caused by running out of disk space, really no way to say for certain. What you can say is that running out of or low of disk space is a condition you really want to avoid.
    The vault like the library is really a folder containing lots of folders and files so deleting it is not as simple a task as deleting a single file. However when I go to remove a vault in Aperture I get the following dialog
    Which shows both Remove and Remove and Delete options. If I select just Remove the vault is removed from Aperture but remains on the disk. Did you not see the same thing?
    Anyway given all you've been through you're doing pretty good. You have your library intact and a backup of it. I'd just go ahead and delete the vaults make sure you have enough room on the disk and then create new vaults. You should be good to go after that,
    good luck
    regards

  • Vault Update problems solved!

    Sorry if this has been posted elsewhere, but I have just discovered a solution to one of my long running Aperture problems and must share in case it helps someone else out! I must say that that I am NOT technically good with computers (which is why I LOVE Macs), but I have found the odd bit of really helpful advice here and hope someone, who is like me, may find this useful:
    Problem: Whenever I would run an update on my Aperture Vault (to a dedicated separate HD), I would ALWAYS get some error messages, every time. At first I did not worry about these thinking, that as long as most of the images have backed up, that would do, as I also backup to DVDs. But then I read that if you ever tried to restore, Aperture would refuse to do so on the grounds that one or more of the files has an error. I consider this a MAJOR fault with the Aperture software, and for some users, renders the vault concept useless (although I am sure that not everyone suffers from this). I would also always be told, on starting Aperture, that several projects and images were not stored in a vault, even when most of the update seemed to work.
    Solution: I have shot a lot of weddings recently and have been adjusting parts of my workflow. I have found out that, if you DELETE all of your rejected files (as it happens, I back them up on DVD, then delete them), then, empty your trash, THEN run the vault update, it seems to work every-time, without any faults. After a year of errors my vault finally seems to be working as it should!.
    Hope this helps someone.
    Paul

    Glad to help, As it was getting frustrating, goes to show newer is not always better, Keep an xp computer handy forever

  • Why are my masters offline in aperture after restore from vault (not referenced)

    I really hope someone can help as I am at my whits end!
    I recently had to do a clean install of lion and so dutifly backed up my Aperture 3 library to a vault. 100% of my library was managed and I have never referenced files and always avoided it.
    I then restored the aperture library from the vault.
    When the new library opens all the files and project organisation is there, but quite a few images are showing as offline.
    I have noticed that the number of offline images is going up by the minute. Something is changing the state of the images.
    I have checked inside the vault and all the masters are there, but for some reason aperture things they are missing. When selecting the "offline" images and then consolidate masters it gives me the alert that there are no referenced files!
    I have tried repairing and then rebuilding the database but this has no effect.
    Does anyone know whats going on or how I can recover the situation?
    I really do look forward to some help from you guys.
    Many Thanks.
    Brad

    It seems so Puzzling Shutter.
    I have the Aperture Library and the Vault both on the internal hard drive.
    I prepared the vault yesterday and according to aperture it was up to date (updated it several times to make sure)
    My vault was on an external hard drive and I copied it to the mac before restoring.
    Once I restored. The library is the same size as the vault.
    When I use the meta search bar in aperture and select show offline images it shows 144 but each time i come out of the all photos view and go back in this number creeps up!
    When I then go and check the vault (on the mac) and the library, the file arent there either but the size of the library and vault hasnt gone down.
    Do you think it could be because I copied the vault to the mac before restoring from it. Do you think I should try restoring from the vault as it is on the hard drive?
    I really appreciate any advice.
    Thanks,
    Brad

  • Can I stop/pause a vault update?

    Okay, I've used vaults for a while but I recently moved my library around and ended up recreating my vault. I think my library is around 250GB and it is taking FOREVER to update. I have already had to force quit Aperture a couple of times when it couldn't finish the vault update overnight, but this time I left it running on my iMac for 24 hours (so far) and it is still not complete. I just cannot wait any longer, I need to use the machine. Does anyone know ift there is a way to stop/pause the vault update and return at a later time? Obviously I can force quit Aperture, but I can't imagine force quitting in the middle results in a very reliable Vault. So, if there's any advice here I would really appreciate it. I mean, time machine can pause in the middle as can many backup apps, I just don't know if I can use something that requires over a day of continuous use to just backup my files!
    Along that same line, does anyone have any opinions on using a different backup app like Carbon Copy Cloner for my Aperture library? I've used TM in the past with poor results (it was very hard to get back the data I needed to recover). Any suggestions would be greatly appreciated!

    What Doug said.
    Note that Masters need only be backed up once (but to multiple backup locations) and that backup should happen immediately after copying to the hard drive from the camera card, before involving Aperture or any other images management app.
    Time Machine is an ongoing regular-routine backup process. Image originals instead need irregularly timed backup, once.
    IMO referenced Masters make far more sense than building huge managed-Masters Libraries.
    • Hard disk speed. Drives slow as they fill so making a drive more full (which managed Masters always does) will slow down drive operation.
    • Database size. Larger databases are by definition more prone to "issues" than smaller databases are.
    • Vaults. Larger Library means larger Vaults, and Vaults are an incremental repetitive backup process, so again larger Vaults are by definition more prone to "issues" than smaller Vaults are. One-time backup of Referenced Masters (each file small, unlike a huge managed-Masters DB) is neither incremental nor ongoing; which is by definition a more stable process.
    Managed-Masters Libraries can work, but they cannot avoid the basic database physics. I recommend putting the Library on the internal drive and keeping Masters on the external drive by reference.
    HTH
    -Allen Wicks

  • I can't open Aperture 1.5.6 after updating to 10.6.8/Snow Leopard

    I can't open Aperture 1.5.6 after updating to my mac10.6.8/Snow Leopard. What should I do. I don't want to lose all my pictures.

    This may sound like I am repeating Allan Eckerts advice, but what he wrote has spelling errors that seems confusing or contradictory.
    Lpcap
    As you did not backup your photos now at least copy the Aperture Library to an external device like a Hard drive or USB.
    I don't know  if Aperture 2 is still available for purchase, as Apple tends to discard older software so quickly.
    Aperture 3 is now the latest,
    Repost in the Aperture forum, for details on how you can best upgrade your Mac 10.6.8 OS to an Aperture version that will be able to rebuild your old library.
    https://discussions.apple.com/community/professional_applications/aperture

  • Vault Updating VERY Slowly in 3.1 Upgrade

    I have two questions.
    1. First vault update after a successful 3.1 upgrade is progressing VERY slowly. Database is about 70 gb and library is completely referenced. Vault update got through the upgrade process relatively quickly, and then proceeded to write the file at a normal pace. (about an hour or so). But, it got to about 70 gb, and has slowed down to a crawl. It has been churning for nearly 24 hours now, with still no signs of finishing.
    2. With a totally referenced library, backed up regularly via Time Machine to a RAID 5 array, with a secondary offsite backup done automatically to a backup service, is there REALLY any need for me to have a vault in the first place? Isn't it just an unnecessary redundancy?

    I would try to restart your Mac. 24 hours is way to long for a 70gb library.
    If Aperture won't quit for the restart, then you will have to Force Quit.
    Relaunch Aperture, after the restart, then update the Vault again. It should be fine the second time. If you want to be sure it's okay, make a new empty library, then Restore the updated Vault to it.
    I like Vaults, because with databases, it's a good idea to let the programmers handle the data integrity.
    Regarding the backup strategy :
    One backup is not enough, but two the same is slightly redundant. My policy is to have one Vault active and a second one off-site. On top of this I have an Archive of job-folders containing tiffs/raws/MFDB-Galleries/other stuff relevant to commissions/ and a mirror of this off-site.
    The off-site bit adds the not inconsiderable protection from fire, flood, theft, children, mother-in-laws and any other natural disasters.

  • Should Vault Update Take So Long

    MacBook Pro, Western Digital 750 GB Firewire Drive (brand new with 700gb available)
    I recently started using Aperture instead of iPhoto and brought over all my old pictures and several camera uploads worth of new photos. I have about 6000 masters now. I created a vault on the external drive and expected the initial copy to take a while and that was fine. The vault takes about 19 gb on the hard drive.
    I think I added a few new masters, then edited ONE version, and the vault status was yellow. Then I decided I would update the vault and clicked the yellow icon. Aperture asked me to confirm updating the vault, then I think it took over half an hour (I stopped watching) to "compare" the vault and update.
    That seems like a lot of time and waiting when all I did was edit one version and maybe add a few masters. I would think backups would be incremental and pretty quick if you hadn't changed many things.
    Am I missing something here? Thanks!

    Maybe:
    iOS: Troubleshooting backup issues in iTunes

  • Vault Update

    It seems that with Aperture 2, the vault does not need updating after making adjustments to images.
    The update progress indicator remains black. If I remember correctly, with Aperture 1.5.6, the update progress indicator would turn yellow after making an adjustment to an image. Am I correct in my recollection? If so, how is 2.0 updating adjustments to the Vault?

    I, too, have the same issue.
    In aperture, making adjustments to a RAW file, or even a JPG file, in the adjustments section no longer yields a yellow vault icon indicating the master image has been altered.
    However, if you crop, rotate, straighten, stamp etc, the yellow vault icon changes from grey to let you know the master files have been altered.
    I called Apple tech support, and they recreated the issue.
    They mentioned they will be speaking with their Aperture team to correct this in future updates, but as of now, there is no work around.

  • Windows Vista update error code 80070490

    Hi there,
    Can anyone help me with this issue! I've tried everything under the sun to fix this problem so I'm hoping you's more in the know than myself can help!!??

    Hi
    This Vista update problem seems to be known to Microsoft:
    +If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt. To correct this problem, you'll need to repair Windows. Repairing Windows won't damage your personal files or the programs that are installed on your computer.+
    Here more details how to fix this issue:
    [Windows Update error 80070490|http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]

  • Windows Vista Update Error 80072EFD

    got Vista Home Premium 32bit and updates were running smooth till January. In Feb- March updates just stopped to work due error code 80072EFD. Have tried with Fixit ( doesn't work as well ) got an error 8004FE2C, and Win Defender got  the same error
    as updates 80072EFD. My laptop is without viruses ( have ESET Smart Security ) and no maleware ( have Malewerebytes ). Already had  checked all Win Update services were they running, then resetting them and added the links of microsoftupdates.com in ESET
    and Explorer ( preventing form blocking the site) even closed all firewalls and security.....without any success. Still got the same error  80072EFD!! 
    Can u please help ! :( 

    Try to use the below to see if it helps http://windows.microsoft.com/en-sg/windows/windows-update-error-80072efd#1TC=windows-7 And try resetting the windows update components http://support.microsoft.com/kb/971058
    Http://blog.theinfraguys.com | Please remember to click “Mark as Answer” on my answer if it helps. :)

  • Windows Vista- Update Error 80044016

    Good afternoon!
    Friend of mine is struggling with Windows Vista SP 2 - Windows Update.
    So far I tried to:
    -Disable AV, Disable Firewall
    -Clean boot
    -Automated solution - fix it
    -Sfc
    -checksur
    -re-register responsible dll's
    regsvr32 wuapi.dll
    regsvr32 wuaueng.dll
    regsvr32 atl.dll
    regsvr32 wucltui.dll
    regsvr32 wups.dll
    regsvr32 wuaueng1.dll
    regsvr32 wucltui.dll
    regsvr32 wups.dll
    regsvr32 wuweb.dll
    regsvr32 wups2.dll
    regsvr32 msxml.dll
    regsvr32 msxml3.dll
    regsvr32 msxml2.dll
    regsvr32 qmgr.dll
    regsvr32 qmgrprxy.dll
    -currently running Malicous software removal from safe mode in case of possible hijack.
    -PC is not under domain influence or behind proxy.
    Fact is this occured after clean install. He tried to reinstal it again and issue persists.
    Could you please check windowsupdate.log bellow and try to tell me what should be my next step?
    Due to the fact that my account is not verified yet, I can't post log here therefore I've chosen pastebin as the best location.
    pastebin.com//WJDzA6eq
    Thank you very much!

    Also I wanted to tell that Update error code is : 80044016
    Regards,
    Chrobak77

Maybe you are looking for