Aperture 2.1.4 doesn't show up in system updater

Hi,
I ran my system update and did not find 2.1.4 showing up. When I launch aperture, I am running 2.1.3 and haven't installed Snow Leopard yet. Does the update show up only after installing snow leopard?
Jeff

If not, you can manually download it from Apple's site:
http://support.apple.com/downloads/
Note if it refuses to install, then it is highly likely you have renamed or moved the Aperture application itself.

Similar Messages

  • My ipod touch 4g doesn't show option for os update in setting-general page. Can i update it via itunes by connecting it to computer?

    My ipod touch 4g doesn't show option for ios update in setting-general page. Can i update it via itunes by connecting it to computer?

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode ue one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Account doesn't show up in system preferences

    In an attempt to override my master password, I started my computer in single user mode, typed /sh/mount -uw / and passwd, and then entered a new password. However, this created a new account called System Administrator on my computer that shows up in the login menu as "Other…". I want to delete this account, but when I log in to my usual account, the System Administrator account doesn't show up in System Preferences. Can anyone tell me how to delete this account?
    (Btw, any tips on how to find out what the password is for the root user would be helpful. From my normal account, the new password I entered doesn't work for root, although it does in the System Administrator account.)
    Thank you!

    Hoping that we are on the same page., but sounds like what you did was enable the root user.
    Its a user that will not be seen in system preferences and should never be gotten rid of (its great for troubleshooting).
    The root user or (system administrator) is different from a User account with Administrator access.
    Browse
    http://support.apple.com/kb/HT1528

  • New Superdrive doesn't show up in System Profiler

    My old superdrive died on me, so I ordered a new one from powerbookmedic.com.
    After installing, it doesn't show up in System Profiler. I've quadruple-checked the connection and I can hear it make regular healthy sounds when booting up so I know it's getting power but once I'm inside OSX; nothing.
    I tried resetting the PRAM and SCM as recommended on this forum for various superdrive trouble. Although it didn't change anything and I'm guessing don't apply here.
    Any tips for getting OSX to recognize my drive?

    It's equipped with a SATA drive - that's why.
    Just take a look further down ..
    Printers
    SAS
    Serial-ATA <--
    USB

  • ITunes doesn't show the 5.0 update for verizon iPhone 4, iTunes doesn't show the 5.0 update for verizon iPhone 4

    OK the 5.0 update has been out for a day, but my itunes still doesn't show the 5.0 update ( wants to update to 4.2.10 which I skipped) available for my verizon iphone 4. Anyone know what is going on?  Is it just my phone? Do I have to do the interim updates first?

    Check this link.
    http://support.apple.com/kb/TS3540

  • Aperture 3 Import Dialog Doesn't Show Any Images

    Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
    Screenshot:
    http://dl.dropbox.com/u/1250153/a3.png
    Any ideas or fixes?

    Hello qua
    You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
    I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
    The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
    Regards,
    Gary

  • Server Admin Doesn't show info for Software Update Service

    In server admin, under the settings and available updates, I see a list of available updates, but they are labelled with the hash code for the update, not the name, and the info panel doesn't show any information like it should. We have our corporate firewall configured to allow connections to the server apple uses for this service so that we can get the updates. Any suggestions?

    That option is only available after upgrading to iOS 5. It appears you have a 2nd generation unit, which can not be upgraded beyond iOS 4.2.1.

  • Trying to get Icloud on my Macbook and it doesn't show up in System Preferences

    I have downloaded the latest update and Icloud still doesn't show up in my System preferences. I would contact apple but it's $59 just to chat to a technician online and I was hoping someone here could help me.

    You need to upgrade the computer's OS to get that pane.
    Open the Mac App Store and try downloading Mavericks. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (114292)

  • HT4589 How do I get the update to 10.0.3? It doesn't show up in software update and I can't find it on the Apple site.

    I am stuck on 10.0 I have not received any updates since I installed FCPX last june. I can't find any links to the update on Apple's site and Software update doesn't show FCPX in its software list. What's the deal?

    If you don't meet the minimum system requirements, it will not allow you to download it:
    http://www.apple.com/finalcutpro/specs/

  • 10.5.7 doesn't show up in Software Update

    I have a new 20" iMac running 10.5.6.
    The new update, 10.5.7, does not show up in Software Update, which I have been manually checking every day for the last week.
    I went into the Genius Bar and no one could figure out why this was happening.

    Follow my upgrade tips first*:
    http://www.macmaps.com/upgradefaq.html
    It sounds to me something is either unhealthy about your machine, or you are using tools which are incompatible with Software Update.
    - * Links to my pages may give me compensation.

  • Ctrl+alt+backspace doesn't work anymore after system update

    After a recent system update (xorg got updated among other packages), ctrl+alt+backspace doesn't restart gdm anymore.
    Before you say it, I have the following in my /etc/X11/xorg.conf
    Section "ServerFlags"
    Option "DontZap" "false"
    EndSection
    Here is the relevant portion from my /var/log/pacman.log and as you can see, xorg-server did get updated.
    [2009-05-29 18:37] starting full system upgrade
    [2009-05-29 18:39] upgraded dhcpcd (5.0.2-1 -> 5.0.4-1)
    [2009-05-29 18:39] NOTE
    [2009-05-29 18:39] ----
    [2009-05-29 18:39] Add your user to group 'camera' to use camera devices.
    [2009-05-29 18:39] upgraded libgphoto2 (2.4.5-1 -> 2.4.6-1)
    [2009-05-29 18:39] upgraded gphoto2 (2.4.4-1 -> 2.4.5-1)
    [2009-05-29 18:39] upgraded gtkam (0.1.15-1 -> 0.1.16.1-1)
    [2009-05-29 18:39] upgraded lib32-glibc (2.9-4 -> 2.10.1-2)
    [2009-05-29 18:39] upgraded lib32-alsa-lib (1.0.19-1 -> 1.0.20-1)
    [2009-05-29 18:39] upgraded lib32-gcc-libs (4.3.3-1 -> 4.4.0-2)
    [2009-05-29 18:39] upgraded lib32-libdrm (2.4.9-1 -> 2.4.11-1)
    [2009-05-29 18:39] upgraded lib32-libgl (7.4.1-1 -> 7.4.2-2)
    [2009-05-29 18:39] upgraded lib32-mesa (7.4.1-1 -> 7.4.2-1)
    [2009-05-29 18:39] upgraded libdrm (2.4.11-1 -> 2.4.11-2)
    [2009-05-29 18:39] upgraded live-media (2009.02.23-1 -> 2009.04.20-1)
    [2009-05-29 18:39] upgraded qt (4.5.1-2 -> 4.5.1-3)
    [2009-05-29 18:39] upgraded phonon (4.3.1-1 -> 4.3.1-2)
    [2009-05-29 18:39] upgraded pygobject (2.16.1-1 -> 2.18.0-1)
    [2009-05-29 18:39] upgraded python-numpy (1.3.0-1 -> 1.3.0-2)
    [2009-05-29 18:39] upgraded qt3 (3.3.8-10 -> 3.3.8-11)
    [2009-05-29 18:39] upgraded whois (4.7.33-1 -> 4.7.33-2)
    [2009-05-29 18:39] upgraded xkeyboard-config (1.5-1 -> 1.6-1)
    [2009-05-29 18:39] upgraded xorg-server (1.6.1-1 -> 1.6.1.901-1)

    Check out http://bbs.archlinux.org/viewtopic.php?id=73064

  • After reinstall, Aperture 1.5.1 doesn't show vault images from backup drive

    Hi folks,
    Okay, I am stuck. For some reason Aperture would not start when I double click the icon, so I reinstalled it from the disk and upgraded it to 1.5.1. I have all the images I was using before the crash backed up in a vault on my back up drive but when I open Aperture the folders and project do not appear in Aperture. I right click on the vault and say open with Aperture.app but nothing happens and I can't seem to access the files with Aperture.
    If anyone can help, it would be really great and appreciated.
    Thank you
    Scott

    Hi Scott,
    Have you checked the Aperture - > Preferences and library location?
    Default should be ~/Pictures/Aperture Library.aplibrary
    Is there a ~/Pictures/Aperture Library.aplibrary in Finder?
    If so, how large it is? does it seem to contain the images(sizewise)?
    Restoring vault:
    Have you tried opening Aperture, select File - Vault - Restore Library
    hth

  • Windows 7 Boot Camp partition doesn't show in the System Preferences.

    Hi,
    I'm running an up to date 10.6.2 on my OS X partition and Windows 7 x64 on my boot camp partition. When I looked at the start up disk preference pane the windows 7 installation didn't show. Is this normal? 32bit XP always showed in the past. If not, what should I do to fix it? I know that I can boot into windows by holding down the alt key on boot but I would like to know this is working correctly.
    Any help would be greatly appreciated.
    Steve Bunt
    Message was edited by: SteveBunt

    Make sure that you have a good install of the Apple drivers (boot camp 3.x) in Windows and that Boot Camp Control Panel there works so that you can set the default OS to either, and that it works.
    But yes, someone else mentioned the same problem or bug.
    The only cause I've seen in the past was where Mac OS X had an NTFS driver and control panel (Paragon, MacFUSE, etc) and you had to use their control panel in OS X.

  • Location map doesn't show in iPhoto since update to Maverick

    Since I have updated to Maverick I have noticed that the location map no longer shows. The info shows and the drop pin also but no map picture. I also tried Hybrid and Satalite but it didn't change.
    Any ideas?

    What version of iPhoto do you currently have?  If it isn't some version of iPhoto 9.x (11) then upgrading to iPhoto 9.,5.1 will be a required purchase.
    OT

  • App doesn't show up in System Preferences after Installation

    Hi -
    I've been trying to install a Wireless-G USB Adapter on a G3
    and is is supposed to show up in the System Preferences,
    but after the installation is complete, it's not there.
    Can anyone help???
    Thanks...

    The guide that came with the adapter says it's for OSX - OS10.3, and I'm running 10.2 - The adapter is a Hawking HWL2A for Apple users, and I was told it would work on my G3.
    I understand that my USB is only 1.1, but does that affect the installer?
    Would you recommend me to just obtain the original airport card & adapter?
    Thanks for your help...

Maybe you are looking for

  • Issue at Purchase order Item Text Transferring

    Hello, I have an issue with Purchase order Item text transferring from SAP R/3 to EDI. Here I am using Function Module - IDOC_OUTPUT_ORDERS. within the function module i have user exit to populate this. User Exit Name : EXIT_SAPLEINM_002 Include name

  • Com.sapportals.pct import issue

    hi, One of my programs uses the flollowing libraries. import com.sapportals.pct.util.pdv.IDataViewer; import com.sapportals.pct.util.pdv.PDVDynPage; import com.sapportals.pct.util.pdv.source.ISource; but it complaints that it cannot find com.sapporta

  • Anyone angry with new DPS Professionnal account term of use (and PRICE) ?

    Hey- It's been a week ago. I have many customer working on projects on DPS Publishing. It was hard to convince them to switch from printing. It was hard to read in the future and find an econimical model for that. But it's the way- And i receive this

  • ACL and sequence numbers

    I had the first two lines in the access list and all was well, I then added the 3rd. From what I need to put the 3rd entry (deny host 10.1.30.51) after the second entry and before the permit any. Even though I created sequence numbers in order of the

  • Where do we put the favicon.ico?

    I know that we have to put it in our file in idisk but where exactly? Thank you Odette