Aperture 2 and Nikon D7000 RAW files. Do I need to upgrade to Aperture 3?

I currently have a Nikon D70 with a Nikon D7000 on its way. I want to know if Aperture 2 will process Nikon D7000 RAW files. I searched Apple support and these discussions. I only could find confirmation that Aperture 3 now handles it. But I have not found anything that confirms that Aperture 2 indeed did NOT get an update to handle the D7000 RAW files.
Can someone confirm this?
Thanks.

For future reference, all the cameras listed on the Aperture RAW Support web page that have the double asterisk "**" require Aperture 3.

Similar Messages

Opening nikon d7000 raw files in pse8

I have downloades camera raw 6 plug in but I am still getting the wrong file type error when I try to open my nikon d7000 raw files in elements 8.
any suggestions??

You need to update to PSE9 as your camera model is not supported in earlier versions
N.B. If you are not wishing to upgrade to PSE9 - you can use the freely available DNG converter 6.3 and then use Elements to open and edit the DNG files. It’s recommended you keep your original raw files as back-up as they can always be read by your camera software.
DNG Converter 6.3for Windows.
DNG Converter 6.3 for MAC.

Opening Nikon D7000 raw files in Elements 8

I am unable to open Nikon D7000 NEF files in Elements 8. I have been unsuccessfull in downloading the version 5.7 update from the web site. After downloading several times the files are still not recognized in Elements 8.

I am using Windows 7. I tried selecting the folder that contained the folder holding the pictures to be converted. I then single-clicked the folder holding the pictures and hit select. A message came up stating that the source folder did not contain any supported camera raw files.I have spoken with my Elements software supplier and this is his response:
"I've done some digging and it turns out the Nikon D7000 wasn't supported in elements until the release of version 6.4 Adobe Camera Reader.So to make sure you have the latest ACR update installed. You can check which one you have by going into elements and clicking Help>About Plug-In>Camera Raw. And if it's not 6.7 then Help>Updates will find it and let you install the latest version. You could also try saving your camera files as .RAW instead of .NEF, and then opening them in elements. Adobe lightroom 4 should already have these plugins available right outside the box, but if you can save the money and run updates instead that would work just fine." I have checked for Elements updates for the Camera Raw plug-in and the message appears stating no updates are available. The camer raw plug-in version is currently 6.1.0.250.
Date: Fri, 28 Sep 2012 07:35:41 -0600
From: [email protected]
To: [email protected]
Subject: Opening Nikon D7000 raw files in Elements 8
    Re: Opening Nikon D7000 raw files in Elements 8
    created by R_Kelly in Photoshop Elements - View the full discussion
What operating system are you using?
The most common cause is pointing the dng converter to the actual files and not just to the folder that the camera raw files are in.
There is an example of how on a windows system in this thread:
http://forums.adobe.com/message/4633126#4633126
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4734703#4734703
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4734703#4734703
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4734703#4734703. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Nikon D7000 raw files will not open using PSE 11

I am unable to open Nikon D7000 raw files(NEF) using PSE 11
When I use the program's "Update "function I just get an error message.
Can anyone advise?
Thanks

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com.

HT3825 I can't open Nikon D7000 raw files in Photoshop CS5. Any ideas how to do it

I can't open Nikon D7000 raw files in Photoshop CS5. Any ideas how to do it

This page might help.
Note that your question does not relate to Apple software nor hardware.

Aperture and Nikon D200 raw files

Can anyone tell me if they know when apple will release an update for Aperture to support Nikon D200 raw files.

Let Apple know by sending a polite note to
http://www.apple.com/feedback/aperture.html
http://www.apple.com/macosx/feedback/ (seeing as RAW support is handled by the OS)
DAVE

ACR and Nikon D800e Raw files

This discussion is actually a follow on to an earlier one where I thought the issue was resolved. I am using CS5 extended 64 bit with WIN 7 64bit and ACR version 6.7. I verified the ACR version checking for updates and was informed I am up to date. According to the ADOBE help site ACR v 6.7 is available to open Nikon D800e raw files. However when I try and open these raw files there is a message that the camera model is not supported. Any help on why the raw files cannot be opened with ACR 6.7 is appreciated.

Thanks Noel - after several hours of experimenting, I found the issue. I use a stand a lone software, Nikon Transfer, to download images to the computer. The software allows me to preview/select, rename, and make simultaneous copies for backup. This software has worked without issue, however when downloading images from the Nikon D800e, it does something to the raw files making them incompatible with ADOBE's ACR and even Nikon's ViewNX 2 software. Now here is the real curosity. When Nikon Transfer is initiated from within Nikon View2 software and not as a stand a lone, it works, and ADOBE ACR 6.7 can read the raw files. Again thanks for the help.

Nikon D7000 raw file plugin for Photoshop Elements 9

I have Photoshop 9 on Windows 8 platform and want to install plugin to be able to process raw files of Nikon D7000.

Use the menu in Full Edit:
Help >> Updates
Then install the camera raw 6.5 plug-in, if available.

Iphoto 11 can't read my nikon D7000 raw files, why?

I bought the latest Macbook air 13 inches and the Nikon D7000.
I tried to import the raw files (NEF) from the Nikon d7000, but it show can't read the files type, or
unsupported image file. It works fine with my nikon D5000, why?
anyone can help?

Okay, I too purchased D7000 and A3 is not supporting "this new" RAW format (A3 did support my D80).
This is the question: Apple knows very well that camera manufacturers do "upgrade" their format - the same as Apple "updates" their format. This is not new, it's called "continual improvement", isn't it? I am sure that Apple has a "current process" to update A3 to handle format improvements from camera manufacturers. That said, I believe that Apple does have an "expected" date for this update. If they don't, then their business process is lacking and would not be competitive . I don't believe that - I am sure they have a good ol' gnatt chart.
It would be great for Apple, if they would give us an "expected date" for this A3 update. When they don't speak to us, we all wonder if they are listening to their paying customers.

PSCS3 won't open Nikon D7000 RAW files

I just purchased a Nikon D7000. Shot some RAW files and tried to download to iPhoto, not possible. SO, installed Nikon VIEW NX2, and Transfer 2. RAW images downloaded to my computer (late 2008 Macbook Pro, Leopard 10.5.8, Camera RAW plug-in 6) into ViEW 2. But showing the followiing format: _DSC001.NEF
Normally, it should read: DSC_001.NEF
SO within the Nikon software, I can work on the image, but I cannot export it into PS. It comes up with an error that the image format is unreadable. (Nor can I find how to get it out of VIEW NX2 , but that might just be my lack of reading all the info there, will see)
I contacted Nikon and they told me to change something in Image Capture in my MAC apps. I went there, but Image Capture was already set to the change they asked me to do.
I tried to download again, but same problem. I tried to download into iPhoto, in order to try and get it into PS, but it wouldn't. All files were unreadable.
JPEG, however, does download, with both file formats, and opensin iPhoto and PS, whether there is a _ first or a letter first.
SO, I don't know what to do. I am assuming all my plug-in's are up to date.
My D70 RAW transfers fine!!! The D7000, not.
Any info out there??? Nikon has not replied back a second time when I responded to them.
Thank you for any help. I welcome it all.

Thanks, all of you.
I downloaded Adobe Camera Raw DNG 6.4 (Not 7.1 as I read it worked slow and had some bugs still in it) and backcomplied it to open in a 4.6 format. It works to open RAW in my PSCS3 now. Great! Of course I definitely will be checking out PSCS6 Extended for an upgrade, but for now, I can use this.
I have 3 questions that I am not clear on.
1) When I converted, I included the 'original raw file' within the DNG, as opposed to NOT incuding it. They say you can open it later, that it is inside the DNG. Please someone explain to me how this can be when I am adjusting and cropping my files after opening in RAW.? (OK I know nothing about this). Where do I find the file???
2) I did notice a little bit of color loss, or maybe it is in the Adobe 1998 color space, but it seemed to transfer fine. Is this the case?
3) If I save in Tiff, would the embedded file still be in the DNG ??It would no longer be a DNG file. I am asuming that I SHOULD be saving an original conversion in DNG for archives and to make copies from. I really do not understand this. I am saving the original NEF file in the Nikon VIEW NX2 for later use as a backup.
Thank you again.

Nikon D7000 Raw Files

Does the new Elements 9 open the D7000 Raw (NEF) files?

Yes the Nikon D7000 has been added in the list of supported cameras for Camera Raw plug-in v6.3. Here is the list of new cameras which have been added in v6.3
Newly Supported cameras for Camera Raw 6 and Lightroom 3
Support for the following cameras has been added from Camera Raw 6.2 to 6.3 and Lightroom 3.2 to 3.3.
Canon PowerShot G12
Canon PowerShot S95
Nikon D7000
Nikon Coolpix P7000
Nikon D3100
Olympus E-5
Panasonic DMC-GF2
Panasonic DMC-GH2
Pentax K-5
Pentax K-r
Ricoh GXR, GR LENS A12 28mm F2.5
Samsung NX100
Samsung TL350 (WB2000)
Sony A560
Sony A580
Once you install PSE 9 go to Help->Updates and install the latest Camera Raw v6.3 as an update and you should be able to use the .NEF files from D7000
. You can also give the trial version of PSE 9 a shot for the same, link to download the trial version : http://www.adobe.com/products/photoshopel/

Elements 11 and Nikon D610 Raw files?

I have Photoshop elements 11 (mac) and have been importing raw files from NikonD70s for years without problem. I recently got a Nikon D610 and now get message saying unbuckle to read file. WHat options do I have. Will upgrading to elements 13 help?Element

Yes an update to PSE13 would work. Or you would need to convert NEF to DNG using the free Adobe converter. You can download PSE13 at this link and try for 30 days before buying - click here for PSE downloads

NIKON D70 RAW files do not work since upgrading to Aperture 1.1.1

Prior to the software update to 1.1.1 everything was working fine with my D70 Raw files. I now get the maroon "Unsupported Image Format" (USF) when I select the images that were previously fine. They show up for a fraction of a second before I get the error. I tried rebuilding the database to no avail. I can export the RAW files and open them in Photoshop so they are OK. Also now when I import from my D70 I get the gray box instead of the image and a letterbox maroon USF message. I have not seen any posts relative to this issue and wonder if there is something else going on.
Dual 1.8Ghz Powermac G5 2GB RAM Radeon X800 XT Mac OS X (10.4.6)

Try this...it seemed to have solved several people's instability issues:
If this doesn't work, post one of your images for people on the forum to check your images.
repairing disk permissions in safe boot mode:
1. To Repair Disk Permissions in Safe Boot restart your computer while holding the Shift key
2. Do not let go of the Shift key until your screen says Safe Boot
3. Once you see the screen with the words Safe Boot let go of the Shift key. If you need to login, login
4. Open Disk Utility located in the Utility folder of your Applications folder, it'll be down at the bottom
5. Select the hard drive that contains your OS & make sure that First Aid is selected (highlighted) in the Disk Utility window
6. Select Repair Disk Permissions
7. When Disk Utility has done its job you'll see the words "Permissions repair complete"
8. While you're at it & since the system is in Safe Boot I'll Verify the other hard drives & Repair them if they need it
Once the utility program has run through the operating system you can quit the application and restart the computer
I routinely use the Repair Disk Permissions feature in the Disk Utility application on Mondays (Maintenance Monday) so I park an icon of it in the Dock. It is a good idea to Repair Disk Permissions more frequently if you are power editing for many hours at a time or the application you are working on begins to misbehave.
Regardless of what application you are using (unless there is a known bug in the application) Repairing Disk Permissions will take care of many problems.
It is recommended to Repair Disk Permissions before & after installing software or software updates

How to open Nikon D7100 Raw files in PSE11? [was:upgrade?]

How do I upgrade my elements 11 since I can`t open RAW-files from my new camera Nikon D7100?

This is not the Photoshop forum, it is the Camera Raw forum. Your camera requires Camera Raw 7.4 or later. I don't know what versions of Camera Raw will work with Photoshop Elements 11. In Elements, you could try Help/update to see if that will automatically update you to the most current version available. Alternatively, you could try using the latest DNG converter with your raw files. But to upgrade to Photoshop Elements 12 just go to the Adobe product website and purchase an upgrade. You can download it and install. Adobe will e-mail you a serial number. Since you are purchasing an upgrade, the installation will look for your previous version and validate the serial number. It's a simple process to upgrade.

Bridge CS4 and Nikon 7100 raw files

Well, I use normally Bridge CS4 (that was included in Elements 8) to organize my pics and to edit or open in camera raw of Elements 11. I normaly shot in raw format with my Nikon d90. Now I shoted some pics with the new Nikon D7100 and I can't use Bridge CS4. I tried to update but Bridge doesn't work. So now I'm obliged to use Elements 11 organiser. Any possibiity to update Bridge CS4?

Adobe products use Adobe Camera Raw (ACR) in various ways. Adobe does not work at, or promise, ACR will work in older or legacy versions of anything. Your 7100 is a brand new model and included in ACR 7.4 and 8.0. Whatever Adobe products you use will have to be upgraded to the latest ACR. With PSE and organizer 11, you have to install it and upgrade with Help > Updates to get 7.4.
It amazes me that people will invest so much in a new camera and its new features without giving any thought to the software they use to support the new camera and features.

Aperture 2 and Nikon D7000 RAW files. Do I need to upgrade to Aperture 3?

Similar Messages

Maybe you are looking for