Aperture 2+D5100+.NEF(RAW)/JPG=Unsupported Image Format

First off, I am new to all this...
But anyway....Last night, for the first time, I imported images directly from my Nikon D5100 memory card onto Aperture 2.  (Yes, I know there is an Aperture 3.  I am just trying this one until it is something I decide I want to put the money in to...then I will get Aperture 3.)   It appeared as though everything was going well because I could see the thumbnails/ previews along the bottom in my browser.  So, I went ahead and deleted the images from my memory card.  Then, when I clicked on an image to edit it in the viewer, I got a red screen with white writing that says "Unsupported Image Format."  Boo!  Is there ANYTHING I can do to recover my images?  And secondly, is there anything I can do to prevent this from happening again? 
A few suggestions from looking around online that I have tried:
***Opening Aperture while holding down Opt+Command and then selecting: "Rebuild Now" and also the "Consistency Check" buttons.
***Opening: Finder- Library- Preferences- and then deleting com.apple.aperture.plist
The only change from doing all that is  now my thumbnails don't appear- instead it just appears as though they are loading...
Again, working with Aperture 2, camera is a Nikon D5100, image format is both RAW (.NEF) /JPEG, (only the RAW file is showing up) and "Unsupported Image Format" message appears when I click on image and try to edit in the viewer.
Thanks for any help or suggestions!
Egrubbs

The D5100 requires Aperture 3 see http://www.apple.com/aperture/specs/raw.html

Similar Messages

  • Nikon NEF raw pictures unsupported Image format

    I have a Nikon D80, I can't see the RAW pictures of this camera in .NEF format. Aperture display UNSUPPORTED IMAGE FORMAT. What can I do?

    you can search this board for D80 unsupported and get detailed instructions on how to update ...
    http://discussions.apple.com/search.jspa?threadID=&q=D80+unsupported&objID=c184& dateRange=last90days&userID=&numResults=15&rankBy=10001

  • Nikon D800 raw files "unsupported image format".

    I've a problem with Nikon D800 raw files "unsupported image format".
    I've just upgrade to mountain lion with no success.
    also aperture seems the last version
    only Nikon software seems to work
    thank you
    Andrea

    Hey Andrea
    sorry for the late reply. Have been on some working holidays
    My setting is : typ>>>>  no
                           bit>>>>   14
    The only information, which is not transmitted is the adjustment level of the AF-finetuning
    Good luck and hope it works meanwhile also with your camera
    :-)) FJ

  • Aperture 3 and DNGs from LX5 raw files: unsupported image format

    My LX5 arrived, and I tried converting a raw file to DNG with Adobe DNG Converter 6.2.0.21 beta and importing it into Aperture. No luck: Aperture says it's an unsupported image format. I tried setting the compatibility as far back as possible in the preferences, and still no luck. Any idea why this doesn't work? I used Adobe DNG Converter multiple times to work with raw files from unsupported cameras, so it's a real surprise to get the unsupported image file message.
    —Andreas

    Unfortunately, this is more about Apple dragging its feet than a cutting edge issue. I got an LX3 and upgraded to Aperture 3 in February of this year. RW2s straight out of the camera always imported just fine. However, I've never been able to get a DNG generated from an RW2 with Adobe DNG converter to work. Interestingly, DNGs from another file format I use (PEF) work fine in Aperture.
    I submitted a issue report to Apple about the RW2 to DNG problem back in March, and like so many other suggestions to them, it seems to have vanished into the ether.

  • 10.5.2; Canon 1DsM3 Raw Files = "Unsupported Image Format" in Aperture

    Just did the update and pointed Aperture to a folder of Canon 1Ds Mark III raw files (standard raw files, no sRaw or anything like that). Thumbnail previews are grey and Viewer says, "Unsupported Image Format".
    Tried rebooting and verifying/fixing permissions. No help. No thumbnails, no images in Aperture.
    Canon 1Ds Mark III raw files do show fine in the finder and in Quick Look.
    Message was edited by: Jon Roemer

    I have the same exact issue.
    I do get the same error with 1Ds MIII raws.
    Also the G9 raws are not working.
    Finally after 3 months it's still not working
    I could imagine that there is the need to edit some property file (like I have read before in the forum somewere) to add the new cameras to the list of supported cameras.
    Are the D3, D300 raws working?

  • HT3946 Unsupported image format

    I've been getting a message "This photo was adjusted using an earlier version of APPLE RAW processing" unsupported image format and it's been doing this to photos I took today and my older one's any advice on how to fix this?

    What is the make of your camera? This problem has occured recently mostly for Lumix and Nikon cameras:
    First try, if reprocessing the images will help:
    See this section of the user manual on how to do this for selected images:
    Reprocessing Images from Previous Versions of Aperture
    If this does not help, you may need to register your camera with the the launch service database again, see this post by Alan Roseman:, Re: Aperture 3 preview of raw file greenish
    There is a "typo" in the command given in the link above, so read also the following posts on how to correctly enter the command and how the fix is supposed to work
    Regards
    Léonie

  • Unsupported Image Format for DNG from GF1?

    I am in the process of trying to switch from Lightroom 3 to Aperture 3 (in case you are wondering why the main reason is increasing integration between iOS and Aperture).
    Most of the images in my Lightroom catalog are from Nikon DSLRs which when I import as DNGs from Lightroom into Aperture show up just fine. However, all of the old DNGs I try to import from Lightroom as DNGs that were shot with my Panasonic GF1 don't render in Aperture and just show up as "Unsupported Image Format."
    Please note that new GF1 images I import from the SD card of my GF1 import just fine. The problem seems limited to GF1 images saved in Lightroom as DNGs that I am importing into Aperture.
    Does anyone have any suggestions as to how to correct this issue?
    Thank you.

    Solved it. Had nothing to do with Photoshop PS4 install, it had to do with moving my home space to a larger external drive. One of the "import" setting changed (I don't remember changing it) such that the images weren't getting imported into Aperture. (Re-?)checked that, and all is well. Will go for the PS4-reinstall tomorrow.

  • Aperture gets "Unsupported Image Format" on some JPG images

    I'm using Aperture 1.5.2 "trial" on PB 15" with OSX 10.4.9. I am getting "Unsupported Image Format" on about half of the 15,000 JPG images that I have on my HDD. But not all of them - even though all images come originally from my D100 camera and are JPEG images. These are all JPEG images with extensions JPG, jpg and jpeg. No RAW or TIFF.
    My images are currently catalogued in iVew MediaPro [IVMP] and I'm interested in switching to Aperture. So I've gotta find a way to import those photos.
    Here's a clue: When I put the CF card from my camera into the computer yesterday and tried to add the images to Aperture it reported that all the images on the CF chip were "Unsupported Image Format." I was not copying the images - just leaving them im place. As a test, I then used IVMP to import from the CF card onto the HDD, into a directory. Afterward, I fired up Aperture and it could properly index and display the files. I noticed that the pre-existing images that are viewable in Aperture all have previews when viewed in the Finder. Also, they've all been imported from CF to HDD using IVMP, so there may be some processing going on there. I also tried reading files into Photoshop and rewriting them with previews, which I verified in the Finder, and those files also can not be viewed in Aperture. So it is not just a question of having a preview - it's something else about the files.
    Another clue - when I shoot more than one CF of photos in a day, I use IVMP to import the first CF batch, and those are always visible in Aperture - but IVMP doesn't let you import two batches on the same date (pretty goofy huh?) - so to import an additional batch I have to (Finder drag-drop) copy from the CF to the HDD into a directory - and those files have no previews, have not been imported thru IVMP, and interestingly are not viewable in Aperture.
    So I'd have to conclude that iView MediaPro is doing something to "tame" the files' format that makes them acceptable to Aperture. But I want to dump IVMP, so there has to be some other way to make these D100 files acceptable to Aperture.
    I either need to "fool" Aperture into reading the files or find a way to tweak 'em and make 'em acceptable to Aperture. Any ideas from other iView/Aperture users out there?
    PB 15"   Mac OS X (10.4.9)  

    Good idea, but I checked it... I mentioned reading right from the card in order to illustrate that the JPG files are "unsupported image format" even *right from the camera*. *In fact* the CF is not the differentiating factor between renderable and non-renderable. The real factor is whether the files went thru iView Media Pro or not. Files that were drag-dropped from the CF into a folder are not renderable by Aperture and files that were imported first (from the CF or from another folder) thru IVMP into a folder are renderable.
    Yesterday I confirmed again that GraphicConverterX does not fix the files if I import and then rewrite with additional options turned on. It also sees the same IPTC data and EXIF on both a "good" file and a "bad" file. Identical. I also fixed the OS9 creator and filetypes so they're <none> and that didn't fix anything - some good files and some bad files have this configuration.
    Ah another COOL THING - I just loaded a CF card into the computer and brought up Aperture - it immediately recognized the card and showed me two previews - one for a NEF (Nikon RAW) and one for a JPG. The previews looked fine. I clicked to have it import the photos. Once imported, the NEF looked OK, but the JPG had a grey preview and then "Unsupported Image Format" on the large version. I think this confirms the file format is a problem, but then why was Aperture able to gen a preview when the file was on the CF chip but not after it was copied to the HDD?
    I double-checked this by copying in Finder drag-drop from the CF card to the HDD and then importing the same two photos (NEF and JPG) from the HDD, and indeed the NEF was renderable and the JPG was not. For me this confirms that there's something about the file format that Aperture can't deal with.
    I then imported the same two files using IVMP (Media Pro) and as expected, both files could then be "imported" and rendered by Aperture. So IVMP is doing something that makes Aperture really happy.
    In case someone can actually compare the two files - I have put up a "bad" and a "good" JPG - it's the same image from a Nikon D100, but one of them (bad) is right from the camera and the other (good) was imported by IVMP and somehow is acceptable to Aperture. Any intelligence that anyone can add based on these files would be useful.
    http://fire.red7.com/aperture-tests/DSC_0070-good.JPG
    http://fire.red7.com/aperture-tests/DSC_0070-bad.JPG
    PB G4 15"   Mac OS X (10.4.9)  

  • Camera RAW support 2.2 update and Nikon .NEF unsupported image format

    Hi,
    I Use a Nikon D2x and only take raw images (.NEF file)
    After I update from RAW support 2.1.1 update to RAW support 2.2 update, all my raw image file (.NEF file) taken before 13th September 2006 ! would not display - In the Aperture program, if i navigate to a project / folder and clicked on a thumb nail in the browser, I get a magenta / cyan screen showing in the main viewer panel with unsupported image format. ?
    This is my worst-case scenario ! - I have entrusted Aperture with all my digital images (all raw .NEF) images taken before 13th September 2006 are un accessible with camera RAW support 2.2 update installed !
    I have deleted (the 2.2 update) “from” System/Library/CoreServices/RawCamera.bundle and reinstall the RAW support 2.1.1 update.
    * NOW I can now see all my raw Nikon .NEF images and they are now all fully functional again *.
    Their is a problem with the Apple digital camera RAW support 2.2 update, it rendered the Aperture program useless to me for my older .NEF image/files (as above).
    This requires a fix ASAP
    Martin

    Thankfully, I wasn't affected by the issue given I'm currently with Canon. There have been Canon woes in the past though.
    On a side note, I never update anything until it has been out for a few weeks just to be sure. Because Aperture is such an integral component of my studio and business, I make sure everything always works before making any updates or changes - including upgrading cameras.
    I'm sure the next update will fix the magenta issues.
    Best,
    CD

  • Raw Files Appear Deleted or Corrupted Suddenly in Aperture with Unsupported Image Format Error

    I have been using Aperture 3, latest update, for the past year. Today, I tried to import new raw files from my new Sony RX1r and, as far as I can see, all raw files in Aperture give the "Unsupported Image Format" and alert symbol in the library where not only new files should be, but also ALL PREVIOUS RAW FILES. These files do no even show up as existing in the iPhoto Library.
    This is, needless to say, distressing, as hundreds and hundreds of photos seem lost. Also, the files show a reduced pixel size and file sizes all go to .5 Mb. Some of the photos seemed to show up initially and look fine until I tried to open them, then they all either disappear or show the Unsupported Image Format instead of the opened file. I have tried rebuilding the iPhoto library, but no help.
    I have looked in these discussions and see similar problems with Aperture. Perhaps, Apple has not made an update for the RX1r from the RX1 for raw files, but why should all older raw files now be corrupted, especially those recently made with my Olympus OM-D? Had no problem with Aperture until this disaster.
    Please help.
    William

    Just an update. Restarted computer and attempted rebuilds of iPhoto library a couple more times and finally files and photos mostly recovered, except for those I had tried to open. Aperture seems to have a problem, or a host of them, dealing with RAW files, and there is no update yet for the Sony RX1R for Aperture or iPhoto. Lightroom 5, on the other hand, seems to work great with these files directly, so that will be where all photos go for now. Will iPhoto and Aperture just become old archives? It is so infuriating that Apple does not allow for simple importing and exporting compatibility with such an excellent program as Lightroom 5 just to protect their somewhat poorly supported Aperture. I've been a staunch Apple supporter and user since the 80's, but having more doubts about the direction this company is taking.

  • Why do G3 raw files show as "Unsupported Image Format" in Aperture?

    I am moving towards shooting in raw, and as an experiment I imported some sample raw files from the publicly available text images on the Photography Blog. When I try to look at these images, I get a black screen with a warning triangle and the message "Unsupported Image Format". This happens for all the different raws, including some G3 raw files (.rw2). Oddly, it can read the EXIF metadata and has all the information about shooting settings etc. If I import the same files into iPhoto, it displays the images properly and allows editing, etc.
    I have a workaround, which I've also tried with my Fuji X10 raws (still not supported on MacOSX), of running them through the Adobe DNG converter, and then looking at the dng files which seem to work fine. But it's a pain.
    This has to be one of those simple "D'oh" things, but I can't see what I'm doing wrong!

    Thanks Leonie, the second part revealed that I have been an idiot, although the behaviour is still surprising. The folder has a mix of DMC-G3 raws, Fuji X10 raws, and DNG files produced from both. For the Fuji X10 files, the DNGs produce images and the raws produce the "Unsupported file format" message. The latter is not surprising, the former a little surprising (as I've heard that DNGs only work when the associated raw works). The last two remarks don't directly address my problem (or perceived problem), but they perhaps set the frame for my expectations.
    For the G3 files, when I look at it more closely, the G3 raws DO display correctly, while the G3 DNGs give "Unsupported file format". I had managed to fool myself into thinking it was the other way round (Aperture does rather hide the full file name).
    So I was completely wrong, Aperture does support DMC-G3 raw, it's just it's DNG support that's a bit weird. However, it's on my side if I need to use X10 raws (via the DNG step). In fact so far I've given up the latter, as the noise levels are so much greater than in Fuji's in-camera JPEG conversion.
    So, thanks very much for your help. Now I remember the first rule of system support: never trust what the customer tells you! (I know you're not really customer support, but I guess the same rule applies.) Thanks again

  • When I try to import raw files from my nikon d600 I get the message Unsupported image format, When I try to import raw files from my nikon d600 I get the message Unsupported image format

    When I import raw files from my Nikon D600 into Aperture I get a tryangle sign with "unsupported image format"

    Latest Adobe DNG converter (7.2) DOES indeed convert NEF pictures coming from a D600.
    Head up to Adobe's website and download the app.
    You'll only miss the focus information (focus distance and focus sensors used), but you'll be able to work with raw and not rely on jpg only!

  • "Unsupported image format"- Has nothing to do with RAW images-

    I have a very weird problem with one of my Aperture 3 libraries. This only seems to apply to one library, all the others I tested seem to work just fine.
    This library was created on my MBA and transfered to my iMac when I returned from my trip. It worked fine until yesterday.
    When I open an image (thumbnail looks just fine) the photo briefly shows the large view with the "Loading" indicator at the top. When the loading indicator goes away the photo is replaced with the "Unsupported image  format" display. After that the thumbnail is gone too. This happens for most, but not all images in this gallery. I can restore the thumbnail and other previews from the raw NEF photos by choosing "Reprocess Original".
    I have already tried all the options the Aperture debug menu offers (start with Option-Command), this didn't help…
    When I open the library in the Finder (Show package contents) I can drill down to the "Previews" folder and see the photos that Aperture wont display. They seem jsut fine and all file permissions seem to be set correctly…
    Has anyone ever experienced this problem? I really don't know what else i could try, short of deleting this library and importing all the images into a new one, losing all my edits, of course… Super annoying…
    Thanks and kind regards, Hans
    Edit: The raw photos are from my Nikon D700, which has been supported by the RAW importer since forever. i dont think that has anything to do with the original files, especially since Aperture can recreate the previews from the raws…

    There has been problems with the last Raw update released a few days ago especially with Nikon cameras.
    Have you updated your system software in the last day or so? Is it possible you updated on one system but not another.
    And for what its worth norbertmuc's question was  valid from a troubleshooting standpoint. If something worked at one point and stop working at a second point it is fair to ask what happened between those two points. He might have been a bit brusque but I don;t think he was accusing you of anything.
    And of course there are many things you can do to a library to break it.

  • Canon G7x and unsupported image format icon with RAW files.

    When RAW files downloaded from Canon G7x get "Unsupported Image Format" message. Using iMac with 10.9.5  and Aperture 3.5.1.  This is a new camera and is not on the supported list.  Is there a way around this?  Now that Aperture is static will new cameras continue to be added to supported list?

    The only way 'around' it is to upgrade to the required Aperture and/or OS version.  So you will need to wait for that to happen. In the meantime you could shoot Raw+JPG, use the JPGs now and when (and if) the camera is supported (or you move to a different program) you will have the Raw files.
    As for camera updates in Aperture, no one here can say what Apple intends, we;re just users here like yourself and even discussing this is technically against the TOU of these forums.
    But I think it is safe to assume, as Apple will continue to support Raw processing and that the Raw processing is done at the OS level and they have said they will support Aperture at least through Yosemite's life cycle that any new Raw format added to OS X will reusable by Aperture. But that's only a guess.

  • D800 Raw files produce occasional 'unsupported image format'

    Is anytone else having problems with some Nikon D800 raw (NEF) files in the latest Aperture version? Most of the files are fine, but some are 'Unsupported Image Format'. Aperture sometime shows them, then they vanish and are replaced with a grey triangle. Then randomly they sometimes come back.
    It seems to just be the Nikon D800 raws casuing this. Any thoughts on a fix?
    Thanks

    It is unlikely to be caused by the recent Aperture update because it started happening to me just a few days ago (Nikon D2x NEF/JPEG pix) and I have been using Aperture version 3.3.2 under OS 10.7.4 for a long time.
    Reconnecting the files in a referenced workflow has been resolving the problem for me.
    -Allen

Maybe you are looking for